Add a need-resync state, this is when we need to try to lock on to a
time/RTPtime pair.
Always check the RTP timestamps and if they go backwards, mark ourselves
as need-resync.
Only resync when need-resync is TRUE and we have a valid time. Otherwise
we keep the old values. This avoids locking on to an invalid time and
causing us to timestamp everything with -1.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=730417
rtpmux behaves like a funnel in that it forwards whatever upstream is
sending buffers. So setting proxy caps doesn't make sense as the
upstream don't have to have compatible caps, thus resulting in an empty
caps set as a result of a caps query. Instead set fixed caps just
as funnel does.
https://bugzilla.gnome.org/show_bug.cgi?id=738722
left, right, top, bottom can be set from range of -2147483648 to 2147483647
when i launch the videobox element with that values, it gives a critical error
(gst-check-1.0:29869): GStreamer-CRITICAL **: gst_value_set_int_range_step: assertion 'start < end' failed
This happens because min cannot be equal to max.
https://bugzilla.gnome.org/show_bug.cgi?id=738838
The loop in zoomFilterSetResolution is meant to change the values in the
zf->firedec[] array. Each iteration writes the value of decc onto the arrya,
but no conditions that change the value of decc are ever met and the array is
filled with zero for each element. Which is the initial state of the
array before the loop begins.
The loop does nothing.
https://bugzilla.gnome.org/show_bug.cgi?id=728353
We never initialize clock_rate explicitly, therefore it is 0 by default. The
parameter is a uint32 and the only caller ensure that it is >0, therefore it
won't become -1 ever.
In order to have a full mapping between channel positions in the audio
stream and loudspeaker positions, the channel-mask alone is not enough:
the channels must be interleaved following some Default Channel Ordering
as mentioned in the WAVEFORMATEXTENSIBLE[1] specification.
As a Default Channel Ordering use the one implied by
GstAudioChannelPosition which follows the ordering defined in SMPTE
2036-2-2008[2].
NOTE that the relative order in the Top Layer is not exactly the same as
the one from the WAVEFORMATEXTENSIBLE[1] specification; let's hope users
using so may channels are already aware of such discrepancies.
[1] http://msdn.microsoft.com/en-us/library/windows/hardware/dn653308%28v=vs.85%29.aspx
[2] http://www.itu.int/dms_pub/itu-r/opb/rep/R-REP-BS.2159-2-2011-PDF-E.pdf
Fixes: https://bugzilla.gnome.org/show_bug.cgi?id=737127
Otherwise the CAPS event will be dropped and we never configure any caps at
all, leading to weird behaviour in many situations. Especially header
rewriting is not going to work if a capsfilter is after wavenc.
https://bugzilla.gnome.org/show_bug.cgi?id=737735
This is about converting the format, not about converting any widths and
heights. Subclasses are expected to handler different resolutions themselves,
like the videomixers already do properly.
gstrtspsrc.c:7939:11: error: implicit conversion from enumeration type 'GstSDPResult' to different enumeration type
'GstRTSPResult' [-Werror,-Wenum-conversion]
res = gst_sdp_message_new (&sdp);
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~
gstrtspsrc.c:7944:11: error: implicit conversion from enumeration type 'GstSDPResult' to different enumeration type
'GstRTSPResult' [-Werror,-Wenum-conversion]
res = gst_sdp_message_parse_uri (uri, sdp);
~ ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Remove pads from flow combiner and reset last
flow return to FLOW_OK by resetting the flow combiner.
This prevents FLOW_FLUSHING when trying to re-use the
demuxer after setting it back to NULL/READY state.
https://bugzilla.gnome.org/show_bug.cgi?id=737359
DTS delta is used to calculate sample duration. If buffer has missing DTS, we take either segment start or previous buffer end time, whichever is later.
This must only be done for non sparse streams, sparse streams can have gaps between buffers (which is handled later by adding extra empty buffer with duration that fills the gap)
https://bugzilla.gnome.org/show_bug.cgi?id=737095
In 1.0, we pass the complete caps to transform_caps to allow for better
optimizations. Make this function actually work on non-simple caps
instead of just ignoring the configured filter caps.
We have to skip 12 bytes of data for the chunk, and the data size
passed to the sub-chunk parsing functions should have 4 bytes less
than the data size.
Also when parsing the sub-chunks, check if we actually have enough
data to read instead of just crashing.
https://bugzilla.gnome.org/show_bug.cgi?id=736266
Drop use of g_socket_get_available_bytes() which is
not useful on all systems (where it returns the size
of the entire buffer not that of the next pending
packet), and is yet another syscall and apparently
very inefficient on Windows in the UDP case.
Instead, when reading UDP packets, use the more featureful
g_socket_receive_message() call that allows to read into
scattered memory, and allocate one memory chunk which is
likely to be large enough for a packet, while also providing
a larger allocated memory chunk just in case the packet
is larger than expected. If the received data fits into the
first chunk, we'll just add that to the buffer we return
and re-use the fallback buffer for next time, otherwise we
add both chunks to the buffer.
This reduces memory waste more reliably on systems where
get_available_bytes() doesn't work properly.
In a multimedia streaming scenario, incoming UDP packets
are almost never fragmented and thus almost always smaller
than the MTU size, which is also why we don't try to do
something smarter with more fallback memory chunks of
different sizes. The fallback scenario is just for when
someone built a broken sender pipeline (not using a
payloader or somesuch)
https://bugzilla.gnome.org/show_bug.cgi?id=610364
This makes sure that also properties like the pixel-aspect-ratio are the same
between both streams and that the output caps contain all fields necessary for
complete video caps.
https://bugzilla.gnome.org/show_bug.cgi?id=735804
gst_buffer_ref and gst_buffer_writable is being used to create a writable copy of source buffer.
replacing the same with gst_buffer_copy as the functionality is same.
https://bugzilla.gnome.org/show_bug.cgi?id=735880
Adding an extra condition while calling gst_caps_unref (templ)
and replacing gst_caps_make_writable (gst_caps_ref (caps)) with
gst_caps_copy (caps) in line 177, since the functionality is same.
https://bugzilla.gnome.org/show_bug.cgi?id=735795
We return EOS after the first buffer, and GstPad will make sure now that we
won't get any other buffer afterwards until a flush happens. No need to check
for it ourselves.
https://bugzilla.gnome.org/show_bug.cgi?id=735581
FLV documentation stipulates that timestamp must start at zero.
In order to respect this rule, keep the first timestamp around
and offset the timestamp from this value. This allow for longer
recording time in presence of timestamp that does not start
at 0 already.
https://bugzilla.gnome.org/show_bug.cgi?id=731352
The tags in FLV are DTS. In audio cases, and for many video format this makes
no difference, but for AVC with B-Frames, PTS need to be computed from
composition timestamp CTS, with PTS = DTS + CTS.
https://bugzilla.gnome.org/show_bug.cgi?id=731352
The jitterbuffer shouldn't force clock-rate on its sink pad, this will cause a negotiation issue since rtpssrcdemux doesn't have the clock-rate and doesn't add it to the caps. The documentation states that the clock-rate can either be specified through the caps or through the request-pt-map signal, so we must remove clock-rate from the pad templates and we must accept the GST_EVENT_CAPS if the caps don't have the clock-rate.
https://bugzilla.gnome.org/show_bug.cgi?id=734322
udpsrc gtk-doc documentation refers to sockfd and closefd properties which has
been removed. This patch replaces those references to socket and close-socket
respectively.
https://bugzilla.gnome.org/show_bug.cgi?id=734987
The old default timescale of 1 millisecond produces irrational
numbers for a lot of framerate/audio-packet-duration multiples.
1/1800 is a nicer number, as it tends to produce better fractions
and therefore slightly higher accuracy overall
Change the way the output framerate is calculated
to ignore the first sample (which is sometimes truncated
in my testing) and use the new gst_video_guess_framerate()
function to recognise common standard framerates better.
Remove the code that was sorting the first 20 sample
durations and then ignoring the result.
Commit 2b9493b5 broke this in two ways: a) we should only
pass duration queries in TIME format upstream (or at least
not those in DEFAULT or BYTE format), and b) we mustn't
overwrite the default value of 'res' from TRUE to FALSE
and not set it again later. This led to bogus durations
being reported for FLV playback from file, because TIME
queries would fail (as 'res' had been set to FALSE) and
parsers then do a BYTE query as fallback and try to
guesstimate something in return, which of course goes
horribly wrong since the BYTE size returned is for the
muxed file.
When changing the properties to not be in passthrough mode anymore,
we will only accept caps we can process ourselves, potentially causing
a not-negotiated error.
https://bugzilla.gnome.org/show_bug.cgi?id=720345
This makes sense in DASH reverse playback, where the upstream dashdemux
will download DASH segments in reverse order, but push their buffers
forward to qtdemux and mark each segment start as DISCONT. This needs
to be forwarded downstream to the parser/decoder, otherwise it won't work.
https://bugzilla.gnome.org/show_bug.cgi?id=734443
When writing out a trak with an edit list, make sure the
overall file duration is also updated to reflect the
lengthening of the stream.
Add some more debug to qtdemux to warn about streams that
are longer than the file and get truncated.
