Similar to the stress test functions for buffers that has a callback to
create the buffer to be pushed, it's useful to have functions that use a
callback to create the event to be pushed.
API: gst_harness_stress_push_event_with_cb_start()
API: gst_harness_stress_push_event_with_cb_start_full()
API: gst_harness_stress_send_upstream_event_with_cb_start()
API: gst_harness_stress_push_upstream_event_with_cb_start_full()
https://bugzilla.gnome.org/show_bug.cgi?id=761932
Depending on when gst_harness_pull was called - before the buffer reached
gst_harness_chain or after we can get different behaviors of the test
with enabled blocking push mode. The fix makes the behavior always the
same. In pull function we get the buffer first, thus making sure
gst_harness_chain waits for the signal, and emitting the signal after.
https://bugzilla.gnome.org/show_bug.cgi?id=761931
Set the sink_forward_pad to NULL before tearing down sink_harness to
avoid that the harness tries to forward events/queries to it while it's
tearing down.
https://bugzilla.gnome.org/show_bug.cgi?id=761904
We have no guarantees about what flags are set on buffers we take
out of the GstAdapter. If we push out multiple buffers from the
first input buffer (which will have discont set), only the first
buffer we push out should be flagged as discont, not all of the
buffers produced from that first initial input buffer.
Fixes issue where the first few mp3 frames/seconds of data in push
mode were skipped or garbled in some cases, and the discont flags
would also trip up decoders which were getting drained/flushed for
every buffer. This was a regression introduced in 1.6 apparently.
Does not matter here but makes Coverity more happy. It can't
know that g_list_remove() only looks at the pointer value but
does not dereference it.
CID 1348454
Currently, the query values are being set even if the query itself was
determined to have failed. Fix this to ensure the values are only set in
case of a query success.
https://bugzilla.gnome.org/show_bug.cgi?id=760479
There's not much lost by having the clock idle around a bit longer but it will
potentially allow anybody wanting to use the same clock server again to sync
much faster.
If multiple net/NTP clocks are created for the same server, reuse the same
internal clock for all of them. This makes sure that we don't flood the server
with too many requests and also possibly allows faster synchronization if
there already was an earlier synchronized clock when creating a new one.
Watching videos with variant bitrate is common to have delta
more than 10 kbps, resulting in tag list spam.
Instead of relying on fixed 10 kpbs delta, it is better to
calculale the difference in percentage and update tag list
only when bitrate changes more than 2%.
https://bugzilla.gnome.org/show_bug.cgi?id=759055
My previous fix for #758029 wasn't quite right and simply made the race rarer.
Some of the files are installed by install-exec and others by install-exec, so
the hooks need to be split too.
https://bugzilla.gnome.org/show_bug.cgi?id=758029
This reverts commit 2c475a0355.
This causes issues with h264parse. It breaks timestamps as
there are headers in the middle of the stream and this patch
makes the timestamps for those differ from the ones that
are adjusted, creating a discontinuity and leading to sync
issues.
Otherwise the buffer was left with the original values and later would
be compared with other buffers that were converted to runninn time,
leading to bad interleaving of multiple streams.
https://bugzilla.gnome.org/show_bug.cgi?id=757961
baseparse tries to preserve timestamps from upstream if
it is running on a time segment and write that to
output buffers. It assumes the first DTS is going to be
segment.start and sets that to the first buffers. In case
the buffer is a header buffer, it had no timestamps and
will have only the DTS set due to this mechanism.
This patch prevents this by skipping this behavior for
header buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=757961
The install hook needs to be a install-data-hook not an install-exec-hook as the
helpers are installed into helperdir which is considered data (only path
variables with "exec" in are considered executables).
The explicit dependency on install-helpersPROGRAMS was an attempt at solving
this, but this causes occasional races where install-helpersPROGRAMS can run
twice in parallel (once via install-all, once via the hook's dependency).
https://bugzilla.gnome.org/show_bug.cgi?id=758029
They take a GstBaseSink instance as argument at not a GstPad. Rename the
argument to 'obj' which is not miss leading and in line with
GST_BASE_SINK_PAD(obj).
https://bugzilla.gnome.org/show_bug.cgi?id=756954
In file included from gst-ptp-helper.c:40:0:
/usr/include/net/if.h:265:19: error: field 'ifru_addr' has incomplete type
struct sockaddr ifru_addr;
https://bugzilla.gnome.org/show_bug.cgi?id=756136
When g_option_context_parse fails, context and error variables are not getting free'd
which results in memory leaks. Free'ing the same.
And replacing g_error_free with g_clear_error, which checks if the error being passed
is not NULL and sets the variable to NULL on free'ing.
https://bugzilla.gnome.org/show_bug.cgi?id=753851
The default padding I introduced in d4f81fb4e6 is
actually only 4 pointers and on 32bit platforms already smaller than the union.
Replace it with a fixed 64byte padding. Don't add the normal padding for now.
Fixes#755822
Broke this when I removed the G_GNUC_PRINTF in a previous
commit to fix indentation, since it was not really needed.
Turns out unlike gcc clang warns though if a non-literal
format string is passed then. Fix indentation differently.
http://clang.llvm.org/docs/AttributeReference.html#format-gnu-format
While this technically is an abi break, we decided to do this:
1) the struct is documented to be internal
2) the struct is alloced and freed inside the library
3) there are no public methods that receive or return instances
4) the only code known to use this struct are classes containd here
gst_segment_to_position might cause confusion, especially with the addition of
gst_segment_position_from_stream_time . Deprecated gst_segment_to_position
now, and replaced it with gst_segment_position_from_running_time.
Also added unit tests.
In order for gst_harness_new_full to be MT-safe the increase and
decrease of HARNESS_REF must be MT-safe. This allows for creating
multiple harnesses from different threads wrapping the same element.
https://bugzilla.gnome.org/show_bug.cgi?id=754661
1. Get a list of pad templates from the element class, not the
factory. This allows us to interact with test-elements that does
not have a factory.
2. Use the pad_template_caps in caps-queries when caps is not set
explicitly on the pad. Not doing so is simply wrong, and prohibits
interactions with special templates used for testing.
https://bugzilla.gnome.org/show_bug.cgi?id=754193
There exist cases where a reconfigure event was propagated from
downstream, but caps didn't change. In this case, we would
reconfigure only when the next buffer arrives. The problem is that
due to the allocation query being cached, the return query parameters
endup outdated.
In this patch we refactor the reconfigurating code into a function, and
along with reconfiguring when a new buffer comes in, we also reconfigure
when a query allocation arrives.
https://bugzilla.gnome.org/show_bug.cgi?id=753850
Explicitly keep track again whether upstream tags or parser tags
already contain bitrate information, and only force a tag update
for a bitrate if we are actually going to add the bitrate to the
taglist later. This fixes constant re-sending of the same taglist,
because upstream provided a bitrate already and we didn't add it,
so we didn't save the 'posted' bitrate, which would then in turn
again trigger the 'bitrate has changed too much, update tags'
code path. Fixes tag spam with m4a files for example.
https://bugzilla.gnome.org/show_bug.cgi?id=679768
In 0.10 there were no sticky events, and all tag events
sent would just be merged with the previously-received
tags. In 1.x we have sticky events, and the tags in the
tag event(s) should at all times carry the complete tags,
so we can't just push some tags and then just push tags
with just bitrates to update the bitrates, etc.
Instead we need to keep track of the upstream stream tags
received, of the tags set by the video decoder subclass,
and send an updated tag event with the combined tags
including our own bitrate tags (if applicable) whenever
the upstream tags, the subclass tags or any of our bitrates
change.
https://bugzilla.gnome.org/show_bug.cgi?id=679768
This is needed so that we can do proper tag handling
all around, and combine the upstream tags with the
tags set by the subclass and any extra tags the
base class may want to add.
API: gst_base_parse_merge_tags()
https://bugzilla.gnome.org/show_bug.cgi?id=679768
Use gst_pad_peer_query_duration() and remove a few
unnecessary levels of indentation. Rest of code might
looks a bit questionable, but leave it as is for now.
According to the design docs:
The ACCEPT_CAPS query is not required to work recursively, it can simply
return TRUE if a subsequent CAPS event with those caps would return
success.
So make it a shallow check instead of recursivelly check downstream.
https://bugzilla.gnome.org/show_bug.cgi?id=748635
GstPad has a flag for suggesting if the accept-caps
query should use intersect instead of the default
subset caps operation to verify if the caps would be
acceptable.
basetransform currently always uses the subset check and
this patch makes it honor the flag for using intersect
if it is set.
https://bugzilla.gnome.org/show_bug.cgi?id=748635
To be able to disable the slightly "magic" forwarding of the
necessary events between the harnesses.
Also introduce a new test-suite for GstHarness, that documents the
feature, and should hopefully expand into documenting most of the
features the harness possesses.
https://bugzilla.gnome.org/show_bug.cgi?id=752746
As of now, even for stream completly inside segment, there is no
guarantied that the DTS will be inside the segment. Specifically
for H.264 with B-Frames, the first few frames often have DTS that
are before the segment.
Instead of using the sync timestamp to clip out of segment buffer,
take the duration from the start/stop provided by the sub-class, and
check if the pts and pts_end is out of segment.
https://bugzilla.gnome.org/show_bug.cgi?id=752791
Even though asserts can't be disabled in GstHarness, Coverity still
complains about running code inside them. Moving the code to outside the
g_asserts().
CID #1311326, #1311327, #1311328
gst_query_find_allocation_meta() requires the query to be
writable to work. This patch ensure avoids taking a reference
on the query, so we can now check if a certain allocation meta
is present.
https://bugzilla.gnome.org/show_bug.cgi?id=752661
By introducing gst_harness_add_src_harness and gst_harness_add_sink_harness
we collect all sub-harness setup in one function, making the previous
sub-harness creation functions now calls these directly, and making it
much easier (and less error-prone) to add your own src or sink-harness
using the more generic harness-creation functions.
This line has no purpose, clearly gst_segment_do_seek() is doing
the right job, also, having the start time (a timestamp) be that
same as time (the stream time) is quite odd.
https://bugzilla.gnome.org/show_bug.cgi?id=750783
The element flag does not indicate wether a bin should be tested as a
source or as a sink, eg. a bin with the sink flag may still have a
source pad and a bin with the source flag may have a sink pad. In this
case it is better to determine the element type by looking at the
available pads and pad templates.
Also rename srcpad and sinkpad where it actually represents
element_srcpad_name and element_sinkpad_name.
https://bugzilla.gnome.org/show_bug.cgi?id=752493
For files which are smaller than 1.5 seconds, the duration
estimation does not happen. So the duration will always be
displayed as 0. Updating the duration on EOS when the estimation
has not happened already
https://bugzilla.gnome.org/show_bug.cgi?id=750131
