Timestamps should start at the segment start, rather than 0, so
we need to not subtract the first timestamp. This makes the sink
correctly account for running time when switching PMTs where a
stream starts not quite at zero, causing timing offsets that can
become noticeable and causing dropped frames after a few times.
A new program object is created to replace an existing one
in the programs hash table, so its refcount needs to match.
With the default of 0 refcount on creation, the next PAT
change will cause that refcount to be both incremented and
decremented (assuming the new PAT references that stream too),
which will cause the program to be destroyed.
https://bugzilla.gnome.org/show_bug.cgi?id=748412
In the H263 spec, CPFMT is present only if the use of a custom
picture format is signalled in PLUSEPTYPE and UFEP is "001",
so we need to check params->format and only if the value is
6 (custom source format) the CPFMT should be read, otherwise
it's not present and wrong data will be parsed.
When reading the CPFMT, the width and height were not
calculated correctly (wrong bitmask).
https://bugzilla.gnome.org//show_bug.cgi?id=749253
Rather than one of the input pad video info's.
The test checking this was not constraining the output frame size
to ensure that the out of frame stream was not being displayed.
No need to call gst_remove_silence_reset() in gst_remove_silence_init() because
vad_new() already calls this function. Since there are no more uses of
_silence_reset(), we can remove it altogether.
Don't use the apis in codec-utils to extract the profile and level
syntax elements since it is wrong if there are emulation prevention
bytes existing in the byte-stream data.
https://bugzilla.gnome.org/show_bug.cgi?id=747613
It's a waste of resources to map it if it won't be converted
or used at all. Since we moved the frame mapping down, we need
to use the GST_VIDEO_INFO accessor macros now in the code above
that instead of the GST_VIDEO_FRAME accessor macros.
https://bugzilla.gnome.org/show_bug.cgi?id=746147
For each frame, compare the frame boundaries, check if the format contains an
alpha channel, check opacity, and skip the frame if it's going to be completely
overwritten by a higher zorder frame. The check is O(n^2), but that doesn't
matter here because the number of sinkpads is small.
More can be done to avoid needless drawing, but this covers the majority of
cases. See TODOs. Ideally, a reverse painter's algorithm should be used for
optimal drawing, but memcpy during compositing is small compared to the CPU used
for frame conversion on each pad.
https://bugzilla.gnome.org/show_bug.cgi?id=746147
Don't use the apis in codec-utils to extract the profile,tier and level
syntax elements since it is wrong if there are emulation prevention
bytes existing in the byte-stream data.
https://bugzilla.gnome.org/show_bug.cgi?id=747613
Free the existing descriptor array, if any, before replacing it.
Fix leaks with the
validate.file.playback.scrub_forward_seeking.test-mpeg2-mp3_mxf scenario.
https://bugzilla.gnome.org/show_bug.cgi?id=748580
If the stream which is about to be removed still has a ref on a tag list we
should drop it.
Fix a leak which was occasionally happening with the
validate.file.playback.change_state_intensive.tron_en_ge_aac_h264_ts scenario.
https://bugzilla.gnome.org/show_bug.cgi?id=748576
Replace videocrop ! videoscale ! capsfilter with the digitalzoom
bin that has the same pipeline internally and already updates
the capsfilter automatically when caps change, removing this code
from wrappercamerabinsrc and making it cleaner.
Avoids one extra uneeded renegotiation if the elements are already
configured to their final property values when the caps event
goes through.
Also avoids hitting bug https://bugzilla.gnome.org/show_bug.cgi?id=748344
It contains videocrop ! videoscale ! capsfilter and implements digital
zooming.
At this moment, it is a private element of the camerabin plugin.
This will remove some code used in wrappercamerabinsrc to make
code clearer and digitalzoom can potentially be used by other
applications in the future, it has nothing camerabin specific.
wrappercamerabinsrc has a videocrop element to be used for
zooming and for cropping when input caps is different when used
with the GstPhotography interface. The zooming part needs
the following elements:
capsfilter ! videocrop ! videoscale ! capsfilter
The capsfilters should always have the same caps to ensure the
zooming is done and preserves dimensions, unless when it is needed
to do more cropping due to input dimensions those caps
need to be modified accordingly to preserve the output dimensions.
This, however, makes it hard to get caps negotiation to work properly
as we need to have different caps in the capsfilters to account for
the extra cropping needed. It could be simple for fixed caps but it
gets tricky with unfixed ones.
To solve this, this patch splits the zooming and dimension reduction
cropping into 2 separate videocrop elements. The first one does
the dimension cropping, which is only needed when the GstPhotography
API is used and the source provides a caps that is different than
what is requested, while the second is dedicated to zoom crop only.
The first part of the pipeline goes from:
src ! videoconvert ! capsfilter ! videocrop ! videoscale ! capsfilter
to
src ! videocrop ! videoconvert ! capsfilter ! videocrop ! videoscale ! capsfilter
It might add an extra overhead in the image capture as the image might need
to be cropped twice but this can be solved by enabling videocrop to use
crop metas so only the later one does the real cropping.
It also makes the code a bit simpler.
Remove tee and output-selector and just link the source
pad to the outputs we want as needed.
The way we need to prioritize caps negotiation and allocation
queries depending on the mode enabled is too custom to be
handled using tee and output-selector.
This provides more flexibility and doesn't get in the way of proper
handling of negotiation and allocation queries.
The detection for missing format/alignment is done way before this
codepath is reached (at which point we have already decided of a
format and alignment).
CID #1232800
When block width property is set to 0, exception occurs.
This happens due to divide by zero errors in calculations.
block width property can never be 0. Hence adjusting the minimum value to 1.
https://bugzilla.gnome.org/show_bug.cgi?id=744188
Such seeks are used to change playback rate and we do not want
to alter the position in that case, so we bypass the flush/seek
logic, and set things up so a new segment is scheduled to be
regenerated.
https://bugzilla.gnome.org/show_bug.cgi?id=735100
This will happen when the PMT changes, replacing streams with
new ones. In that case, we need to accumulate the running time
from the previous chain in the segment base.
https://bugzilla.gnome.org/show_bug.cgi?id=745102
Reset the internal segment before freeing it.
mxf_index_table_segment_parse() allocates data inside the segment
(like segment->delta_entries) which have to be freed using
mxf_index_table_segment_reset().
https://bugzilla.gnome.org/show_bug.cgi?id=746803
Also:
- Don't modify size on early buffer
The size is the size of the buffer, not of remaining part.
- Use the input caps when manipulating the input buffer
Also store in in the sink pad
- Reply to the position query in bytes too
- Put GAP flag on output if all inputs are GAP data
- Only try to clip buffer if the incoming segment is in time or samples
- Use incoming segment with incoming timestamp
Handle non-time segments and NONE timestamps
- Don't reset the position when pushing out new caps
- Make a number of member variables private
- Correctly handle case where no pad has a buffer
If none of the pads have buffers that can be handled, don't claim to be EOS.
- Ensure proper locking
- Only support time segments
https://bugzilla.gnome.org/show_bug.cgi?id=740236
When the timeout is reached, only ignore pads with no buffers, iterate
over the other pads until all buffers have been read. This is important
in the cases where the input buffers are smaller than the output buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=745768
Correctly calculate alpha in a few places by dividing by 255,
not 256.
Fix the argb and bgra blending functions to avoid an off-by-one
error in the calculations, so painting with alpha = 0xff doesn't
ever bleed through from behind
Currently the alignment property just makes sure that we
output things in multiples of align*packet_size bytes, but
with no clear maximum size. When streaming MPEG-TS over
UDP one wants buffers with a maximum packet size of 1316.
The alignment property so far would just output buffers
that are a multiple of 1316 then.
Instead we now make the alignment property output
individual buffers with the alignment size, which
is entirely backwards compatible with the expected
behaviour up until now. For efficiency reason
collect all those buffers in a buffer list and
send that downstream.
Also collect data to push downstream in a buffer
list from the adapter if we don't align things,
which is still more efficient because of the
silly way the muxer currently creates output
packets.
https://bugzilla.gnome.org/show_bug.cgi?id=722129
Actually accumulate the sample counter to check the accumulated error
between actual timestamps and expected ones instead of just resetting
the error back to 0 with every new buffer.
Also don't reset discont_time whenever we don't resync. The whole point of
discont_time is to remember when we first detected a discont until we actually
act on it a bit later if the discont stayed around for discont_wait time.
https://bugzilla.gnome.org/show_bug.cgi?id=746032
