In gst_video_info_to_caps(), make sure we end up with an RGB matrix for
RGB formats and warn when the GstVideoInfo colorimetry is wrong.
In gst_video_info_from_caps(), fix the GstVideoInfo with an RGB matrix
for RGB formats and warn about inconsistent caps.
See https://bugzilla.gnome.org/show_bug.cgi?id=759624
For RGB formats, the matrix in the colorimetry (conversion from YUV to
RGB) is irrelevant and we should ignore it and assume the identity
transform for everything we do.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=759624
It's quite unexpected behaviour that various subclass settings are just
reset before set_format(). Unfortunately changing this now has the risk
of breaking existing code but we should reconsider this for 2.0.
When the input and output formats are the same and in a possible
intermediate format, avoid unpack and pack.
Never do passthrough channel mixing.
Only do dithering and noise shaping in S32 format
Add support for float and int16 mixing
Remove in-place processing, this simplifies things as we won't be using it.
Don't do clipping for float audio formats
Process as many samples as we can from the input and return the number
of processed samples from the chain. This simplifies some code.
Fix the IN_WRITABLE handling, don't overwrite the flags.
Pass flags in _converter_new() so that we can configure ourselves
differently depending on some options.
SOURCE_WRITABLE -> IN_WRITABLE because the array is called 'in'
Simplify the API, we don't need the consumed and produced output
arguments. The caller needs to use the _get_in_frames/get_out_frames API
to check how much input is needed and how much output will be produced.
When we run the loop for another time and do not have a preset name, we would
try to print the preset name of a previous iteration that is already freed.
Also move some other variables into the block where they are actually used
to prevent similar mistakes in the future.
CID 1346536
We did not take the sample size into account. Rearrange the tests to have more
conversion test and an extra test case for passthrough operations.
Fixes#759890
Rename samples to num_samples, since we also have samples in chain, but that is
the data pointer. Always use gzize for num_samples. Make the log output a bit
more homogenous.
The EOS event can be propagated to the downstream elements when
is_eos flag remains set even after leaving the flushing state.
This fix allows this element to normally restart the streaming
after receiving the flush event by clearing the is_eos flag.
https://bugzilla.gnome.org/show_bug.cgi?id=759110
Rework the main processing loop. We now create an audio processing
chain from small core functions. This is very similar to how the
video-converter core works and allows us to statically calculate an
optimal allocation strategy for all possible combinations of operations.
Make sure we support non-interleaved data everywhere.
Add functions to calculate in and out frames and latency.
Match the section 5.1.2 of the HTTP/1.0 spec by using relative URIs unless we
are using a proxy server. Also, send Host header for compatability with
HTTP/1.1 and some HTTP/1.0 servers.
https://bugzilla.gnome.org/show_bug.cgi?id=758922
gst_rtsp_connection_connect_with_response accepts a response pointer
which it fills with the response from setup_tunneling if the
connection is configured to be tunneled. The motivation for this is to
allow the caller to inspect the response header to determine if
additional authentication is required so that the connection can be
retried with the appropriate authentication headers.
The function prototype of gst_rtsp_connection_connect has been
preserved for compatability with existing code and wraps
gst_rtsp_connection_connect_with_response.
https://bugzilla.gnome.org/show_bug.cgi?id=749596
Depayloaders will look at rtpbuffer->buffer for the discont flag.
When we set the discont flag on a buffer in the rtp base depayloader
and we have to make the buffer writable, make sure the rtpbuffer
actually contains the newly-flagged buffer, not the original input
buffer. This was introduced with the addition of the process_rtp_packet
vfunc, but would only trigger if the input buffer wasn't flagged
already and was not writable already.
When we detect a discont and the input buffer isn't already flagged
as discont, handle_buffer() does a gst_buffer_make_writable() on the
input buffer in order to set the flag. This assumed it had ownership
of the input buffer though, which it didn't. This would still work
fine in most scenarios, but could lead to crashes or mini object
unref criticals in some cases when a discont is detected, e.g. when
using pcapparse in front of a depayloader. This problem was
introduced in bc14cdf529.
In the case where the stream doesn't have a framerate set and the frames
don't have a duration set, we still want to use the clipping path to
make sure we don't push buffers outside of the segment.
The problem was the previous iteration was setting a duration of 2s, which
meant that any buffer which was less than 2s before the segment start would
end up getting pushed.
Instead, use a saner 40ms (25fps single frame duration) to figure out whether
the frame could be within the segment or not
Some servers incorrectly parse header names with strict case-sensitivity. For
compatibility with these systems change X-Sessioncookie to x-sessioncookie.
https://bugzilla.gnome.org/show_bug.cgi?id=758921
Any latency query before this will not get the correct latency so a new
latency query should be triggered once the audio sink know its own latency.
Without this the initial latency query from the pipeline arrives too early
sometimes and the resulting latency is too short.
https://bugzilla.gnome.org/show_bug.cgi?id=758911
Some Opus files found on the wild have 0 in the version field of the
OpusHead header, instead of the correct value of 1. The files still
play, don't make this error fatal.
https://bugzilla.gnome.org/show_bug.cgi?id=758754
Commit ff6d1a2a25 changed sample's type from
gint to gsize (and renamed it to in_samples). gsize is an unsigned long,
which means it can never be a negative value and the check making sure that
in_samples is >= 0 is never going to be false. Removing it.
CID 1338689
Move the audio quantize code from audioconvert to the audio library.
work on making an audio converter helper function similar to the video
converter.
Fold fastrandom directly into the quantizer, add some ORC code to
optimize this later.
Rename _get_default_mask() to _get_fallback_mask() to make it more
clear that the function only provides a fallback if nothing else can be
done. Also clarify this in the documentation.
API: gst_audio_channel_get_fallback_mask()
Add a TRUNCATE_RANGE flag for unpack functions to fill the least
significate bits with 0 (as did the old code). Also add functions
that don't truncate. Use the TRUNC flag in audioconvert for
backwards compatibility for now.
No need to use G_GINT64_FORMAT for potentially negative values of
GstClockTimeDiff. Since 1.6 these can be handled with GST_STIME_ARGS.
Plus it creates more readable values in the logs.
https://bugzilla.gnome.org/show_bug.cgi?id=757480
If the flush-start is arrived during _eos_wait() in basesink,
the 'eos' flag is overwritten to TRUE after exiting the _eos_wait().
To resolve the overwritten issue,
the subclass doing the _eos_wait() call should return the right value.
If the eos flag is set to TRUE again, it will cause error(enter the eos flow)
of the following state changing from PAUSED to PLAYING in basesink.
https://bugzilla.gnome.org/show_bug.cgi?id=754980
Encrypted RTP buffers may contain encrypted padding, hence it's
necessary to have an option to relax the validation in order to
successfully map the buffer.
When the flag GST_RTP_BUFFER_MAP_FLAG_SKIP_PADDING is set
gst_rtp_buffer_map() will map the buffer like if padding is not
present.
https://bugzilla.gnome.org/show_bug.cgi?id=752705
When g_option_context_parse fails, context and error variables are not getting free'd
which results in memory leaks. Free'ing the same.
And replacing g_error_free with g_clear_error, which checks if the error being passed
is not NULL and sets the variable to NULL on free'ing.
https://bugzilla.gnome.org/show_bug.cgi?id=753852
gir include search directories should respect PKG_CONFIG_PATH,
just like we do everywhere else. Makes g-i pick up the right
paths when using ./configure --with-pkg-config-path=
https://bugzilla.gnome.org/show_bug.cgi?id=755494
v210, UYVP and IYU1 are complex formats for which pixel stride does not really
have a meaning. If we copy width*pstride bytes per line, it's not going to do
the right thing. As a fallback, copy stride bytes per line. This might copy
uninitialized bytes at the end of each line, but at least copies the frame.
https://bugzilla.gnome.org/show_bug.cgi?id=755392
Otherwise the application might push new buffers into the queue while we're
flushing, potentially causing the GQueue data structure to become inconsistent
and causing crashes soon after.
https://bugzilla.gnome.org/show_bug.cgi?id=754597
The dependency setup does not seem to work for all systems,
causing the build to fail with:
gstrtpbaseaudiopayload.c:65:0:
fatal error: gst/audio/audio-enumtypes.h: No such file or directory
My setup:
gcc (Ubuntu 4.8.4-2ubuntu1~14.04) 4.8.4
autoconf (GNU Autoconf) 2.69
automake (GNU automake) 1.14.1
libtool (GNU libtool) 2.4.2
https://bugzilla.gnome.org/show_bug.cgi?id=754344
