This is a work-around to satisfy the va-intel-driver.
Normalize the quality factor and scale QM values (only for packed header
generation) similar to what VA-Intel driver is doing . Otherwise the
generated packed headers will be wrong, since the driver itself is
scaling the QM values using the normalized quality factor.
https://bugzilla.gnome.org/show_bug.cgi?id=748335
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Fix uninitialized variables when decoding SPS and PPS NAL units from
"codec-data" buffers. This is particularly important when seeking ops
are involved, and the new persistent states are used more often.
https://bugzilla.gnome.org/show_bug.cgi?id=750094
The approximation of 6 times compression ratio migh not
work in all cases. Especially when enabling I frames.
Provide large enough size for coded-buffer creation.
The approximation of 4 times compression ratio will not
work in all cases. Especially when enabling I frames.
Provide large enough size for coded-buffer creation.
Implement decoding process for gaps in frame_num (8.5.2). This
also somewhat supports unintentional loss of pictures.
https://bugzilla.gnome.org/show_bug.cgi?id=745048https://bugzilla.gnome.org/show_bug.cgi?id=703921
Original-patch-by: Wind Yuan <feng.yuan@intel.com>
[fixed derivation of POC, ensured clone is valid for reference,
actually fixed detection of gaps in FrameNum by PrevRefFrameNum]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Try to identify missing first fields too, thus disregarding any
intermediate gaps in frames. We also assume that we keep the same
field sequence, i.e. if previous frames were in top-field-first
(TFF) order, then so are subsequent frames.
Note that insertion of dummy first fields need to operate in two
steps: (i) create the original first field that the current field
will inherit from, and (ii) submit that field into the DPB prior
to initializing the current (other) field POC values but after any
reference flag was set. i.e. copy reference flags from the child
(other field) to the parent (first field).
https://bugzilla.gnome.org/show_bug.cgi?id=745048
Interlaced H.264 video frames always have two fields to decode and
display. However, in some cases, e.g. packet loss, one of the field
can be missing. This perturbs the reference picture marking process,
whereby the number of references available in DPB no longer matches
the expected value.
This patch adds initial support for missing field within a decoded
frame. The current strategy taken is to find out the nearest field,
by POC value, and with the same parity.
https://bugzilla.gnome.org/show_bug.cgi?id=745048
Try to maintain a "top-field-first" (TFF) flag, even if the H.264 standard
does not mandate it. This will be useful for tracking missing fields, and
also for more correct _split_fields() implementation for frames in the DPB.
Don't try to decode pictures until the first I-frame is received within
the currently active sequence. There is no point is decoding and then
displaying frames with artifacts.
Fix decoding of end_of_seq() NAL unit so that to not submit the current
picture for decoding again. This is pretty vintage code that dates back
before the existing of the whole decoder units machinery.
One issue that could be arising if that code was kept is that we could
have submitted a picture, and subsequently a GstVideoCodec frame, twice.
Once without the decode_only flag set, and once with that flag set. The
end result is that the GstVideoDecoder would release the codec frame
twice, thus releasing stale data.
In short, the piece of code that is removed by this patch is for once
completely obsolete for a while, and secondly error-prone in corner
cases.
If the GOP temporal sequence number (TSN) is interpolated from a valid
PTS, then we need to compensate that PTS corresponding to the start of
GOP with the next picture to be decoded, which shall be an I-frame,
based on its sequence number.
https://bugzilla.gnome.org/show_bug.cgi?id=748676
Before pushing a the new frame, the render() method calls sync() to flush the
pending frames. Nonetheless, the last pushed frame never gets rendered, leading
to a memory leak too.
This patch calls sync() in the destroy() to flush the pending frames before
destroying the window.
Also a is_cancelled flag is added. This flag tells to not flush the event
queue again since the method failed previously or were cancelled by the user.
https://bugzilla.gnome.org/show_bug.cgi?id=749078
Otherwise wl_display_dispatch_queue() might prevent the pipeline from
shutting down. This can happen e.g. if the wayland compositor exits while
the pipeline is running.
Changes:
* renamed unlock()/unlock_stop() to unblock()/unblock_cancel() in gstvaapiwindow
* splitted the patch removing wl_display_dispatch_queue()
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=747492https://bugzilla.gnome.org/show_bug.cgi?id=749078
wl_display_dispatch_queue() might prevent the pipeline from shutting
down. This can happen e.g. if the wayland compositor exits while the
pipeline is running.
This patch replaces it with these steps:
- With wl_display_prepare_read() all threads announce their intention
to read.
- wl_display_read_events() is thread save. On threads reads, the other
wait for it to finish.
- With wl_display_dispatch_queue_pending() each thread dispatches its
own events.
wl_display_dispatch_queue_pending() was defined since wayland 1.0.2
Original-patch-by: Michael Olbrich <m.olbrich@pengutronix.de>
* stripped out the unlock() unlock_stop() logic
* stripped out the poll handling
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=749078https://bugzilla.gnome.org/show_bug.cgi?id=747492
Since frame in the private data means the last frame sent, it would
semantically better use last_frame.
Also, this patch makes use of g_atomic_pointer_{compare_and_exchange, set}()
functions.
https://bugzilla.gnome.org/show_bug.cgi?id=749078
Wayland window has a pointer to the last pushed frame and use it to set the
flag for stopping the queue dispatch loop. This may lead to memory leaks,
since we are not keeping track of all the queued frames structures.
This patch removes the last pushed frame pointer and change the binary flag
for an atomic counter, keeping track of number of queued frames and use it for
the queue dispatch loop.
https://bugzilla.gnome.org/show_bug.cgi?id=749078
This patch takes out the wayland's buffer from the the frame structure. The
buffer is queued to wayland and destroyed in the "release" callback. The
frame is freed in the surface's "done" callback.
In this way a buffer may be leaked but not the whole frame structure.
- surface 'done' callback is used to throttle the rendering operation and to
unallocate the frame, but not the buffer.
- buffer 'release' callback is used to destroy wl_buffer.
Original-patch-by: Zhao Halley <halley.zhao@intel.com>
* code rebase
* kept the the event_queue for buffer's proxy
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=749078
This patch fixes several issues found when running the `make distcheck`
target:
- In commit c561b8da, the update of gstcompat.h in Makefile.am was
forgotten.
- In commit c5756a91 add the simple_encoder_source_h in EXTRA_DIST was
forgotten.
- vpx.build.stamp is not generated at all, only vpx.configure.stamp.
- The make target distcleancheck failed because some autogenerated files
were not handled with the DISTCLEANFILES variable.
Note: `make distcheck -jXX` is not currently supported.
GST_VAAPI_ENCODER_STATUS_NO_SURFACE and GST_VAAPI_ENCODER_STATUS_NO_BUFFER
are not errors, so they do not have the ERROR namespace.
This patch fixes this typo in documentation.
On s390x, guintptr and GstVaapiID are not compatible types. The
implementation of gst_vaapi_window_new_internal() and all its callers
seem to assume that its third argument is a GstVaapiID, while the
header gives it guintptr type.
https://bugzilla.gnome.org/show_bug.cgi?id=744559
Since bug #745728 was fixed the oldest supported version of GStreamer is
1.2. That GStreamer release requires glib 2.32, so we can upgrade our
requirement too.
This patch changes the required version of glib in configure.ac and removes
the hacks in glibcompat.h
https://bugzilla.gnome.org/show_bug.cgi?id=748698
This patch only intends to improve readability: in the method
gst_vaapi_window_wayland_sync() the if/do instructions are squashed into a
single while loop.
Also renames the frame_redraw_callback() callback into frame_done_callback(),
which is a bit more aligned to Wayland API.
The Wayland compositor may still use the buffer when the frame done
callback is called.
This patch destroys the frame (which contains the buffer) until the
release callback is called. The draw termination callback only controls
the display queue dispatching.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
https://bugzilla.gnome.org/show_bug.cgi?id=747492
Based up on the value of uniform_spacing_flag in Picture Parameter Set,
the tile column width and tile row height should be calculated.
Equations: 6-1, 6-2
Tiled video Descriptions: 7.3.2.3, 7.4.3.3
-- Set NoRaslOutputFlag based on EOS and EOB Nal units
-- Fix PicOutputFlag setting for RASL picture
-- Fix prev_poc_lsb/prev_poc_msb calculation
-- Drop the RASL frames if NoRaslOutputFlag is TRUE for the associated IRAP picture
-- Fixed couple of crashes and added cosmetics
There is a race condition where g_drm_device_type can be left set to
DRM_DEVICE_RENDERNODES when it shouldn't.
If thread 1 comes in and falls into the last else statement setting up both
RENDERNODES and LEGACY types. And begins to process the first type (RENDERNODES),
it sets g_drm_device_type = RENDERNODES.
Now when thread 2 comes in and sees g_drm_device_type is RENDERNODES, it queues
up that type to be tried but then encounters the lock and has to wait until the
first thread finishes. Once the lock is acquired it will then proceed to ONLY try
RENDERNODES and fail it. But it doesn't try LEGACY. And from then on, all future
attempts will only try RENDERNODES.
So to avoid this situation I have simply moved the acquisition of the lock higher
up in the attached patch.
https://bugzilla.gnome.org/show_bug.cgi?id=747914
The video pool can be accessed with the display lock held, for example,
when releasing a buffer from inside vaapisink_render, but allocating
a new object can may also take the display lock. Which means a possible
deadlock.
https://bugzilla.gnome.org/show_bug.cgi?id=747944
The support for buffer exports in VA-API was added in version 0.36. These
interfaces are for interop with EGL, OpenCL, etc.
GStreamer-VAAPI uses it for a dmabuf memory allocator. Though, gstreamer-vaapi
has to support VA-API versions ranging from 0.30.4, which doesn't support it.
This patch guards all the buffer exports handling (and dmabuf allocator) if
the detected VA-API version is below 0.36.
https://bugzilla.gnome.org/show_bug.cgi?id=746405
The member size in GstMpeg4Packet is gsize which is unsigned, which cannot be
less than zero. Hence this pre-condition test is a no-op. This patch removes
that code.
https://bugzilla.gnome.org/show_bug.cgi?id=747312
slice_type in slice_param is defined as (char *), but it is compared against a
signed integer. clang complains about this comparison.
This patch casts the variable.
https://bugzilla.gnome.org/show_bug.cgi?id=747312
The symbol GstVaapiCodedBuffer is already defined in
gst-libs/gst/vaapi/gstvaapicodedbuffer.h which is loaded, at the end, by
gstvaapiencoder_objects.h. Clang complains about the symbol re-definition.
This patch removes that redefinition.
https://bugzilla.gnome.org/show_bug.cgi?id=747312
The member value in frame_rate_tab is float, the result of the abs() function
should be float too. But abs() only manages integers.
This patch replaces abs() with fabsf() to handle correctly the possible floats
values.
https://bugzilla.gnome.org/show_bug.cgi?id=747312
The purpose of gstcompat.h is to couple the API differences among
gstreamer-1.0 and gstreamer-0.10. Since gstreamer-0.10 is obsolete, the code
in this compatibility layer shall be removed.
Nevertheless, the gstcompat.h header should be kept, if new incompatibilites
appear in the future, but it shall live in gst/vaapi, not in gst-libs.
This patch removes the crumbs defined gstcompat.h and moves it to gst/vaapi.
In order to avoid layer violations, gstcompat.h includes sysdeps.h and all
the includes in gst/vaapi of sysdeps.h are replaced with gstcompat.h
https://bugzilla.gnome.org/show_bug.cgi?id=745728
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
This library was intended to add the base classes for video decoders which
where not included in gstreamer-0.10.
Since the support of gstreamer-0.10 is deprecated those classes are not
required, thus the whole library is removed.
https://bugzilla.gnome.org/show_bug.cgi?id=745728https://bugzilla.gnome.org/show_bug.cgi?id=732666
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
This patch only removes the support of gstreamer-0.10 in the autotools
scripts. No other files are touched.
The configuration parameter --gstreamer-api was deleted since now it is always
auto-detected.
The verification of vmethod query in GstBaseSinkClass was removed since it was
added in gstreamer 0.10.35. The same case for GstVideoOverlayComposition and
its format flags.
The precious variable GST_PLUGIN_PATH was removed, while GST_PLUGIN_PATH_1_0
remained.
The automake files were changed accordingly.
Removed, in debian/control, the vaapiupload and vaapidownload descriptions.
https://bugzilla.gnome.org/show_bug.cgi?id=732666https://bugzilla.gnome.org/show_bug.cgi?id=745728
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add support for H.264 MVC Multiview High profile encoding with
more than 2 views. All views within the same accesss unit are
provided in increasing order of view order index (VOIdx).
Upto 10 view are supported for now.
A new property "view-ids" has been provided for the plugins to
set the view ids (which is an array of guint values) to be used
for mvc encoding.
https://bugzilla.gnome.org/show_bug.cgi?id=732453
Add support for GstVideoGLTextureOrientation modes. In particular,
add orientation flags to the GstVaapiTexture wrapper and the GLX
implementations. Default mode is that texture memory is laid out
with top lines first, left row first. Flags indicate whether the
X or Y axis need to be inverted.
Add GstVaapiTextureEGL abstraction that can create its own GL texture,
or import a foreign allocated one, while still allowing updates from a
VA surface.
Add helpers to import EGLImage objects into VA surfaces. There are
two operational modes: (i) gst_vaapi_surface_new_from_egl_image(),
which allows for implicit conversion from EGLImage to a VA surface
in native video format, and (ii) gst_vaapi_surface_new_with_egl_image(),
which exactly wraps the source EGLImage, typically in RGBA format
with linear storage.
Note: in case of (i), the EGLImage can be disposed right after the
VA surface creation call, unlike in (ii) where the user shall ensure
that the EGLImage is live until the associated VA surface is no longer
needed.
https://bugzilla.gnome.org/show_bug.cgi?id=743847
Add initial support for EGL to libgstvaapi core library. The target
display server and the desired OpenGL API can be programmatically
selected at run-time.
A comprehensive set of EGL utilities are provided to support those
dynamic selection needs, but also most importantly to ensure that
the GL command stream is executed from within a single thread.
https://bugzilla.gnome.org/show_bug.cgi?id=743846
Added rounding control handling for VC1 simple and Main profile
based on VC1 standard spec: section 8.3.7
https://bugzilla.gnome.org/show_bug.cgi?id=743958
Signed-off-by: Lim Siew Hoon <siew.hoon.lim@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Practically we should be able to support more formats, for eg:
JPEG Encoder can support YUV422, RGBA and all.
But this is causing more issues which need proper fix here and there.
Otherwise the condition could become true before the lock
is taken and the g_cond_signal() could be called
before the g_cond_wait(), so the g_cond_wait() is never
awoken.
https://bugzilla.gnome.org/show_bug.cgi?id=740645
Add support for GEM buffer imports. This is useful for VA/EGL interop
with legacy Mesa implementations, or when it is desired or required to
support outbound textures for instance.
https://bugzilla.gnome.org/show_bug.cgi?id=736718
Add new gst_vaapi_surface_new_with_dma_buf_handle() helper function
to allow for creating VA surfaces from a foreign DRM PRIME fd. The
resulting VA surface owns the supplied buffer handle.
https://bugzilla.gnome.org/show_bug.cgi?id=735362
Add gst_vaapi_surface_new_from_buffer_proxy() helper function to
create a VA surface from an external buffer provided throug the
new GstVaapiBufferProxy object.
Add support for GEM buffer exports. This will only work with VA drivers
based off libdrm, e.g. the Intel HD Graphics VA driver. This is needed
to support interop with EGL and the "Desktop" GL specification. Indeed,
the EXT_image_dma_buf_import extension is not going to be supported in
Desktop GL, due to the lack of support for GL_TEXTURE_EXTERNAL_OES targets
there.
This is useful for implementing VA/EGL interop with legacy Mesa stacks,
in Desktop OpenGL context.
https://bugzilla.gnome.org/show_bug.cgi?id=736717
Use the new VA buffer export APIs to allow for a VA surface to be
exposed as a plain PRIME fd. This is in view to simplifying interop
with EGL or OpenCL for instance.
https://bugzilla.gnome.org/show_bug.cgi?id=735364
The VA buffer export APIs work for a particular lifetime starting from
vaAcquireBufferHandle() and ending with vaReleaseBufferHandle(). As such,
it could be much more convenient to support implicit releases by simply
having a refcount reaching zero.
https://bugzilla.gnome.org/show_bug.cgi?id=736721
Reword surface pool allocation helpers so that to allow for a simple
form, e.g. gst_vaapi_surface_pool_new(format, width, height); and a
somewhat more elaborated/flexible form with optional allocation flags
and precise GstVideoInfo specification.
This is an API/ABI change, and SONAME version needs to be bumped.
Add GstVaapiDisplay::get_{visual_id,colormap}() helpers to help determine
the best suitable window visual id and colormap. This is an indirection in
view to supporting EGL and custom/generic replacements.
Add GstVaapiWindowClass::get_colormap() hook to help determine the
currently active colormap bound to the supplied window, or actually
create it if it does not already exist yet.
Add GstVaapiWindowClass::get_visual_id() function hook to help find
the best suitable visual id for the supplied window. While doing so,
also simplify the process by which an X11 window is created with a
desired Visual, i.e. now use a visual id instead of a Visual object.
Add a new generic helper function gst_vaapi_window_new() to create
a window without having the caller to check for the display type
himself. i.e. internally, there is now a GstVaapiDisplayClass hook
to create windows, and the actual backend implementation fills it in.
Add new generic helper functions gst_vaapi_texture_new_wrapped()
This is a simplification in view to supporting EGL.
Add gst_vaapi_display_has_opengl() helper function to help determining
whether the display can support OpenGL context to be bound to it, i.e.
if the class is of type GST_VAAPI_DISPLAY_TYPE_GLX.
Make gst_vaapi_display_get_display_type() return the actual VA display
type. Conversely, add a gst_vaapi_display_get_class_type() function to
return the type of the GstVaapiDisplay instance. The former is used to
identify the display server onto which the application is running, and
the latter to identify the original object class.
Record the underlying native display instance into the toplevel
GstVaapiDisplay object. This is useful for fast lookups to the
underlying native display, e.g. for creating an EGL display.
