For buffers with multiple memory chunks, gst_buffer_map() has the side
effect of merging the memory chunks into one contiguous
chunk. Since gst_util_dump_mem() used gst_buffer_map() the internals
of the buffer could actually change as a result of printing it.
For the case of a buffer containing several memory chunks,
gst_memory_map() is now used to obtain the memory address and each
memory chunk is dumped separately preceded by a header line. The
behaviour for a buffer containing a single memory chunk is left unchanged.
Otherwise it can happen that we start waiting for another pad, while one
pad already has events that can be handled and potentially also a buffer
that can be handled. That buffer would then however not be accessible by
the subclass from GstAggregator::get_next_time() as there would be the
events in front of it, which doesn't allow the subclass then to
calculate the next time based on already available buffers.
As a side-effect this also allows removing the duplicated event handling
code in the aggregate function as we'll always report pads as not ready
when there is a serialized event or query at the top of at least one
pad's queue.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/428
The install kwarg on configure_file() was only added in
Meson 0.50 but we're targetting older versions as well,
which caused a warning. The install kwarg is not needed
here as we specify install_dir, so we can just drop it.
Fixes#379
The documentation says that this allows the subclass to signal that it
needs more data before it can decide on caps, so let's actually
implement it that way.
If the element before the sink needs $n buffers to produce one output
buffer, we were reffing $n events and unreffing only one.
Prevent this by using g_object_set_qdata_full() to handle the event
unreffing so we're sure no ref will be lost.
This was added in 1.16 and accidentally duplicated the value of
the existing GST_MESSAGE_REDIRECT.
As the only known user of this message is GStreamer core itself,
and it is quite an obscure message, it seems best to just fix up
the enum value even if that technically breaks API.
Fixes#418
gst_ring_buffer_logger_log calls several functions while formatting
the message which may in turn log a message while we already hold
the mutex. Do all formatting first before acquiring the mutex to
avoid this and reduce the time we hold the mutex.
The records are static and so appear as false positives when using those
tracers with the leaks tracer as well.
The leaks tracer was already setting this flag on its record so let's
set it on the other ones as well.
In gst_download_buffer_wait_for_data(), when a seek is made with
perform_seek_to_offset() the `qlock` is released temporarily. Therefore,
the flushing condition can be set during this period and should be
checked.
This was not being checked before, causing occasional deadlocks when
GST_DOWNLOAD_BUFFER_WAIT_ADD_CHECK() was called.
GST_DOWNLOAD_BUFFER_WAIT_ADD_CHECK() assumes that the caller has already
checked that we're not flushing before, since this is done when
acquiring the lock; so if we release it temporarily somewhere, we need
to check for flush again.
Without that check, the function would keep waiting for the condition
variable to be notified before checking for flushing condition again,
and that may very well never happen. This was reproduced when during pad
deactivation when running WebKit in gdb.
sync=TRUE implementation changes the latency query of a non-live
upstream into live, though it wrongly set the upstream max latency to 0.
As non-live sources won't loose data if we wait longer, this should have
been reported as have no max latency limite (-1).
This is similar to what demuxers do, and necessary when multiple
sinks get seeked downstream of the aggregator: if we forward
duplicated seeks upstream, elements such as demuxers may drop
the flushing seeks, but return TRUE, aggregator then waits forever
for the flushing events.
Fixes#276
And change it to do nothing at all.
As debug categories don't use reference counting and they can be
retrieved from anywhere at any time by name, it is fundamentally unsafe
to free them at any point in time except for right before the end of the
process.
No code apart from a unit test seems to be currently using the function,
so deprecate it and also change it to do nothing at all.
When passing "sink_%d" twice to aggregator before it would create two
pads called "sink_0", because it failed to parse "%d" as integer and
used 0 instead then.
Instead validate that parsing was actually successful and also don't
even try to parse if the requested pad name contains a '%'.
We use to display the latency of each element in random order which is
not very convenient when comparing latency between different runs.
Sort them by "first activity" (the first latency reported for each
element) so it's consistent betwen runs.
This is the same logic when sorting and displaying element stats.
In the hotdoc inspector for example, pads are instantiated with
g_object_new, other code paths to get/set properties already make
that check.
And update doc cache
This feature was previously available only through the SIGUSR2 signal,
which meant it wasn't available on platforms that don't have UNIX
signals, such as Windows and with applications that already use
SIGUSR1 for something else.
Now we have action-signals for doing the same. These action signals
can also be used for fetching the checkpoint information
programmatically instead of printing to the debug log.
Needs a valgrind suppression for:
==11119== Warning: invalid file descriptor -1 in syscall close()
==11119== Warning: invalid file descriptor -1 in syscall close()
==11119== Syscall param write(buf) points to uninitialised byte(s)
==11119== at 0x4C4AFAD: syscall (in /usr/lib64/libc-2.29.so)
==11119== by 0x4E70DF9: write_validate (Ginit.c:112)
==11119== by 0x4E70DF9: UnknownInlinedFun (Ginit.c:148)
==11119== by 0x4E70DF9: mincore_validate (Ginit.c:131)
==11119== by 0x4E70CC3: UnknownInlinedFun (Ginit.c:208)
==11119== by 0x4E70CC3: access_mem (Ginit.c:242)
==11119== by 0x4E75536: UnknownInlinedFun (libunwind_i.h:168)
==11119== by 0x4E75536: apply_reg_state (Gparser.c:863)
==11119== by 0x4E75A71: _ULx86_64_dwarf_step (Gparser.c:952)
==11119== by 0x4E71BD3: _ULx86_64_step (Gstep.c:71)
==11119== by 0x48BAF47: generate_unwind_trace (gstinfo.c:2726)
==11119== by 0x48BC92E: gst_debug_get_stack_trace (gstinfo.c:2908)
==11119== by 0x49B2BB2: handle_object_created.part.0 (gstleaks.c:384)
==11119== by 0x488134E: gst_object_constructed (gstobject.c:141)
==11119== by 0x49EC61B: g_object_new_internal (gobject.c:1845)
==11119== by 0x49EE347: g_object_new_valist (gobject.c:2128)
==11119== by 0x49EE69C: g_object_new (gobject.c:1648)
==11119== by 0x48CA59D: gst_pad_new_from_template (gstpad.c:867)
==11119== by 0x68C209E: gst_base_src_init (gstbasesrc.c:454)
==11119== by 0x4A0A0C3: g_type_create_instance (gtype.c:1858)
==11119== by 0x49EC42C: g_object_new_internal (gobject.c:1805)
==11119== by 0x49EDB14: g_object_new_with_properties (gobject.c:1973)
==11119== by 0x49EE6C0: g_object_new (gobject.c:1645)
==11119== by 0x48AF91A: gst_element_factory_create (gstelementfactory.c:372)
==11119== Address 0x1ffeffe000 is on thread 1's stack
==11119== in frame #6, created by generate_unwind_trace (gstinfo.c:2695)
Fixed in libunwind commit:
b256722d49
Needs a separate suppression for Debian because the callstack is
different there.
This allows programs to inspect the leaked objects directly, log them,
and so on. Unlike the existing mechanism to use SIGUSR1, this also
works on platforms that do not support UNIX signals, such as Windows
and with applications that already use SIGUSR1 for something else.
This will be useful in the next commit where we add action-signals on
the leaks tracer to get information about leaks and to manipulate
checkpoints as a replacement for the SIGUSR1 and SIGUSR2 signals for
doing the same.
This will be useful in combination with the next commit when we add
API to get a list of active tracers so that consumers of the API can
easily distinguish tracer objects.
The offset in gst_buffer_resize() is additive. So to move back the
offset to zero, we need to pass the opposite of the current offset. This
was raised through the related unit test failingon 32bit as on 64bit
the alignment padding was enough to hide the issue. The test was
modified to also fail on 64bit. This patch will remove spurious
assertions like:
assertion 'bufmax >= bufoffs + offset + size' failed
Fixes#316
It's not really possible for us to recover when someone uses the
gst_tracer_record_new() API incorrectly. Also, document a piece of
somewhat-obscure code.
strcmp() does not allow the arguments to be NULL, but g_strcmp0()
does, so document that we use g_strcmp0() so that people don't need to
worry about that.
Ensure that the code paths for HAVE_UNWIND and HAVE_DBGHELP are never
taken at the same time, even if the build file code changes.
Prefer DbgHelp over libunwind on Windows in case both are somehow
available because DbgHelp is only available when building with the
MSVC toolchain, and libunwind won't give us debug symbols from objects
built with the MSVC toolchain.
Also, print slightly more useful messages for the level of stack trace
support enabled, and document what each if conditional does.
The code implicitly uses this value when the stack trace is not FULL.
Mostly useful for documenting the behaviour when each flag is passed
and for translating to/from strings.