Commit graph

1415 commits

Author SHA1 Message Date
Hyunjun Ko
9397cd7d4d libs: decoder: h264: initialize active_sps/pps in reset
Since commits in https://bugzilla.gnome.org/show_bug.cgi?id=781142 landed,
they introduced regression in seek.

Formerly, once seek is done, decoder drops P-frames until I-frame arrives.
But since the commits landed, it doesn't drop P-frame and does try to
decode it continuously because active_sps is still alive. See ensure_sps function.
But there are prev_frames and prev_ref_frames reset already, then it
causes assertion.

So it's necessary to reset active_sps/pps also in reset method.

https://bugzilla.gnome.org/show_bug.cgi?id=783726
2017-06-15 13:40:27 +02:00
Víctor Manuel Jáquez Leal
3ed2023c2c libs: encoder: fix compilation with old versions of libva
There are some symbols that are not used when compiling with old
version of libva and those generates a compilation error.

Original-patch-by: Matt Staples <staples255@gmail.com>
2017-06-15 13:24:56 +02:00
Sreerenj Balachandran
595f8b7d4b libs: encoder: Fix the quality level clamping
Change the hard-coded range of quality-level from {1-8} to {1-7},
since it is the range Intel Open source driver supports.
Also perform the range clamping only if the user provided
quality-level is greater than the max-range suppored by the driver,
because there could be non-intel drivers giving lower value than
the hard-coded max value 7.

https://bugzilla.gnome.org/show_bug.cgi?id=783567
2017-06-13 16:51:52 +02:00
Víctor Manuel Jáquez Leal
eee8a78173 libs: encoder: log out the name of the profile
Instead of printing a number, it is more readable to log out, in
case of error, the name of the failing profile.
2017-06-13 13:51:01 +02:00
Hyunjun Ko
3dce250236 libs: encoder: h264: changes raw number of profile to macro name of its
Changes raw number of profile to macro name of its to improve readability.

https://bugzilla.gnome.org/show_bug.cgi?id=757941
2017-06-13 13:39:19 +02:00
Víctor Manuel Jáquez Leal
94b41c8d38 libs: encoder: set framerate if bigger than 0/1
Just set the framerate parameter if the framerate numerator and
denominator are bigger than zero.

Otherwise, in Intel Gen6 driver, a warning is raised disabling the
bitrate control.

Original-patch-by: Hyunjun Ko <zzoon@igalia.com>

https://bugzilla.gnome.org/show_bug.cgi?id=783532
2017-06-08 13:21:42 +02:00
Víctor Manuel Jáquez Leal
f8afb1eea4 libs: encoder: bitrate target percentage calculation
If the rate control is set to Constant Bit Rate (CBR) the target
percentage is 100%, otherwise is 70%
2017-06-07 16:04:38 +02:00
Víctor Manuel Jáquez Leal
4b5ecca29c libs: encoder: h264,h265,mpeg2,vp8,vp9: refactor ratecontrol param
Centralize the common configuration for the Rate Control parameter,
thus can be overloaded per each specific encoder.
2017-06-07 16:04:38 +02:00
Víctor Manuel Jáquez Leal
035efded75 libs: encoder: h264,h265,mpeg2,vp8,vp9: refactor framerate param
Since the framerate VA parameter is calculated equally among all the
encoders, it is better to handle it in the base encoder class.
2017-06-07 12:43:55 +02:00
Sreerenj Balachandran
4bf8ef724b libs: encoder: vp9: Adds CBR and VBR Encoding support
https://bugzilla.gnome.org/show_bug.cgi?id=766832

Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-06-07 12:08:10 +02:00
Hyunjun Ko
5d345b08fd libs: encoder: vp8: Adds VBR Encoding support
https://bugzilla.gnome.org/show_bug.cgi?id=778732
2017-06-07 11:24:38 +02:00
Hyunjun Ko
f68d0452be libs: encoder: h265: Adds VBR Encoding support
Enables Variable BitRate mode, which does set FrameRate and RateControl
parameters.

https://bugzilla.gnome.org/show_bug.cgi?id=778732
2017-06-07 11:24:38 +02:00
Hyunjun Ko
cbd912b89b libs: encoder: Describes more detail about the bitrate property
https://bugzilla.gnome.org/show_bug.cgi?id=778732
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
81886682cd libs: encoder: h265: add rate control parameter
https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
d733714ef8 libs: encoder: h264,h265,mpeg2: add framerate parameter
https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
846c276e26 libs: encoder: vp8,h264,h265,mpeg2: set misc param once
Instead of recalculating the miscellaneous buffer parameters for
every buffer, it is only done once, when the encoder is configured.
And for every buffer, the same structures are just copied.

https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
acf106e1a7 libs: encoder: vp8,h264,h265,mpeg2: refactor misc parameters
This is patch pretends to decouple the assignation of the values
in the parameter structures and the VA buffer's parameters setting.

It may lead to some issues since HRD, framerate or controlrate may
not be handled by the specific encoder, but they are set in
the VA buffer's parameters.

I leave as it because this patch is just a transitional patch.

https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
daff4e9fbd libs: encoder: vp8: fix frame rate calculation
According to the VA documentation:

     The framerate is specified as a number of frames per second,
     as a fraction.  The denominator of the fraction is given in
     the top half (the high two bytes) of the framerate field, and
     the numerator is given in the bottom half (the low two bytes).

     For example, if framerate is set to (100 << 16 | 750), this is
     750 / 100, hence 7.5fps.

     If the denominator is zero (the high two bytes are both zero)
     then it takes the value one instead, so the framerate is just
     the integer in the low 2 bytes.

This patch fixes the the framerate calculation in vp8 encoder
according to this.

https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
baac8dc8a3 libs: encoder: vp8: refactor FrameRate parameter
Move frame-rate parameter from ensure_misc_params() to
ensure_contro_rate_param() since it only has meaning when the
control rate is either VBR or CBR.

https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
fc5106bd31 libs: encoder: h264,h265,mpeg2,vp8: refactor HDR
Move the Hypothetical Reference Decoder (HRD) parameter, from
ensure_misc_params() to ensure_control_rate_params(), since it
only shall be defined when the control rate is either VBR or CBR.

https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
b538a86d4e libs: encoder: h264,vp8,mpeg2: refactor control rate
Instead of filling the control rate param in ensure_misc_params(),
this patch refactor it out, as a first step to merge the same code
for all the encoders.

https://bugzilla.gnome.org/show_bug.cgi?id=783449
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
5c05a8b436 libs: encoder: h264, h265, mpeg2: remove assert
Remove spurious asserts for misc parameters. If they cannot be
allocated, FALSE is already returned.
2017-06-07 11:24:38 +02:00
Víctor Manuel Jáquez Leal
37b81a7b69 libs: encoder: use VA quality level structure
Instead of using a proxy to story the buffer quality level, the
encoder now uses the native VA structure, which is copied to the
dynamically allocated VAEncMiscParameterBuffer.

This approach is computationally less expensive.
2017-06-07 11:24:08 +02:00
Víctor Manuel Jáquez Leal
0e31137dec libs: standardize the FIXME comment
This is a trivial patch that makes homogeneous the FIXME tag in
comments.

For more info about these comment style:
http://wiki.c2.com/?FixmeComment
2017-06-01 16:05:50 +02:00
Hyunjun Ko
e66aaf166c libs: encoder: vp8: set quality level regardless of rate control mode
https://bugzilla.gnome.org/show_bug.cgi?id=782957
2017-05-23 11:55:03 +02:00
Víctor Manuel Jáquez Leal
ed3360bf3b libs: encoder: check for maximum number of slices
Right now, H264 and HEVC can set as a property the number of slices to
process. But each driver can set a maximum number of slices, depending
on the supported profile & entry point.

This patch verifies the current num_slices to process against the maximum
permitted by the driver and the media size.

https://bugzilla.gnome.org/show_bug.cgi?id=780955
2017-05-19 16:33:27 +02:00
Víctor Manuel Jáquez Leal
58f6e78017 libs: utils: mark functions as internals
The functions in this header are internal to the library.
2017-05-15 18:36:21 +02:00
Víctor Manuel Jáquez Leal
3c31e8292a libs: context: add missing documentation
Document the region-of-interest configuration variables.
2017-05-15 18:35:40 +02:00
Hyunjun Ko
f09f21def7 libs: window: x11: fix src rect info when using vpp
Since we started using VPP in VaapiWindowX11, we need to care about
the case that src rect and window's size are different.

So, once VPP has converted to other format, we should honor the
size of the VPP's surface as source rect. Otherwise, it is cropped
according the previous size of the source rect.

https://bugzilla.gnome.org/show_bug.cgi?id=782542
2017-05-12 16:23:38 +02:00
Hyunjun Ko
f3302a0a79 libs: encoder: h264: set ROI params during encoding
Set ROI params during encoding each frame, which are set via
gst_vaapi_encoder_add_roi ()

https://bugzilla.gnome.org/show_bug.cgi?id=768248

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-05-12 11:12:56 +02:00
Hyunjun Ko
7a6f690340 libs: encoder: add api gst_vaapi_encoder_add/del_roi
Implements and exposes new api gst_vaapi_encoder_add/del_roi to set ROI regions.

https://bugzilla.gnome.org/show_bug.cgi?id=768248
2017-05-12 11:12:56 +02:00
Hyunjun Ko
b41d72b7c5 libs: encoder/context: query region of interest support
Queries if the driver supports "Region of Interest" (ROI) during the config
creation.

  This attribute conveys whether the driver supports region-of-interest (ROI)
  encoding, based on user provided ROI rectangles.  The attribute value is
  partitioned into fields as defined in the VAConfigAttribValEncROI union.

  If ROI encoding is supported, the ROI information is passed to the driver
  using VAEncMiscParameterTypeROI.

https://bugzilla.gnome.org/show_bug.cgi?id=768248

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-05-12 11:12:56 +02:00
Víctor Manuel Jáquez Leal
3ec7996d75 libs: encoder: fix a comment 2017-05-12 11:12:56 +02:00
Víctor Manuel Jáquez Leal
4269adf791 libs: encoder: guard quality level configuration
The quality level appeared in VA-API 0.36. So let's guard its
usage.
2017-05-11 12:23:28 +02:00
Sreerenj Balachandran
4f343f82e3 encoders: add quality level tuning
This patch adds the handling of VAEncMiscParameterTypeQualityLevel,
in gstreamer-vaapi encoders:

  The encoding quality could be set through this structure, if the
  implementation supports multiple quality levels. The quality level set
  through this structure is persistent over the entire coded sequence, or
  until a new structure is being sent. The quality level range can be queried
  through the VAConfigAttribEncQualityRange attribute. A lower value means
  higher quality, and a value of 1 represents the highest quality. The quality
  level setting is used as a trade-off between quality and speed/power
  consumption, with higher quality corresponds to lower speed and higher power
  consumption.

The quality level is set by the element's parameter "quality-level" with a
hard-coded range of 1 to 8.

Later, when the encoder is configured in run time, just before start
processing, the quality level is scaled to the codec range. If
VAConfigAttribEncQualityRange is not available in the used VA backend, then
the quality level is set to zero, which means "disabled".

All the available codecs now process this parameter if it is available.

https://bugzilla.gnome.org/show_bug.cgi?id=778733

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-05-11 11:51:56 +02:00
Hyunjun Ko
2d7c7630c9 libs: windows: wayland: fix leak if failure of sync
Sometimes gst_vaapi_window_wayland_sync returns FALSE when poll returns EBUSY
during destruction.
In this case, if GstVaapiWindow is using vpp, leak of vpp surface happens.
This surface is not attached to anything at this moment, so we should release
it manually.

https://bugzilla.gnome.org/show_bug.cgi?id=781695
2017-04-25 11:24:38 +02:00
Hyunjun Ko
824974e657 libs: window: wayland: mark frames as done
When the frame listener callbacks 'done', the number of pending
frames are decreased. Nonetheless, there might be occasions where
the buffer listener callbacks 'release', without calling previously
frame's 'done'. This leads to problem with
gst_vaapi_window_wayland_sync() operation.

This patch marks as done those frames which were callbacked, but if
the buffer callbacks 'release' and associated frame is not marked
as 'done' it is so, thus the number of pending frames keeps correct.

https://bugzilla.gnome.org/show_bug.cgi?id=780442

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-04-24 13:16:03 +02:00
Víctor Manuel Jáquez Leal
3b314ba93e libs: window: wayland: don't sync at destroy()
Don't call gst_vaapi_window_wayland_sync() when destroying the
wayland window instance, since it might lead to a lock at
gst_poll_wait() when more than one instances of vaapisink are
rendering in the same pipeline, this is because they share the
same window.

Since now all the frames are freed we don't need to freed the
private last_frame, since its address is invalid now.

https://bugzilla.gnome.org/show_bug.cgi?id=780442

Signed-off-by: Hyunjun Ko <zzoon@igalia.com>
2017-04-24 13:14:05 +02:00
Hyunjun Ko
ca314a25cc libs: window: wayland: null buffer at destroy()
Fix leakage of the last wl buffer.

VAAPI wayland sink needs to send a null buffer while destruction,
it assures that all the wl buffers are released. Otherwise, the last
buffer's callback might be not called, which leads to leak of
GstVaapiDisplay.

This was inspired by gstwaylandsink.

https://bugzilla.gnome.org/show_bug.cgi?id=774029

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-04-21 16:01:47 +02:00
Jagyum Koo
896a836f1d libs: window: wayland: rt event queue at destroy()
The proxy object of wl_buffer for the last frame remains in the
wl_map. Even though we call wl_buffer_destroy() in
frame_release_callback(), the proxy object remains without being
removed, since proxy object is deleted when wayland server sees the
delete request and sends 'delete_id' event.

We need to call roundtrip before destroying event_queue so that the
proxy object is removed. Otherwise, it would be mess up as receiving
'delete_id' event from previous play, when playing in the next
va/wayland window with the same wl_display connection.

https://bugzilla.gnome.org/show_bug.cgi?id=773689

Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
2017-04-21 16:01:46 +02:00
Víctor Manuel Jáquez Leal
9c3a4edf05 libs: window: wayland: cancel read at poll message
Always call wl_display_cancel_read() when an errno is set, but
different to EAGAIN or EINTR.

https://bugzilla.gnome.org/show_bug.cgi?id=780442
2017-04-21 16:01:34 +02:00
Jan Schmidt
bae56fe0c2 h264 decoder: Implement reset() for faster flush
Implement a custom reset() function for faster flushes
that just clear the reference pictures but don't reallocate
the DPB or clear out SPS/PPS

https://bugzilla.gnome.org/show_bug.cgi?id=781142
2017-04-12 10:43:49 +10:00
Jan Schmidt
a7a9b33ad9 Implement decoder reset on flush, rather than recreating
Clear decoders out on a flush but keep the same instance,
rather than completely recreating them. That avoids
unecessarily freeing and recreating surface pools
and contexts, which can be quite expensive

https://bugzilla.gnome.org/show_bug.cgi?id=781142
2017-04-12 10:43:49 +10:00
Víctor Manuel Jáquez Leal
bd2e304ea4 libs: window: don't add an unused function
The macro GST_VAAPI_OBJECT_DEFINE_CLASS_WITH_CODE only defines
a function that is never used, thus when compiling we might see
this warning (clang):

gstvaapiwindow.c:147:1: warning: unused function 'gst_vaapi_window_class' [-Wunused-function]
GST_VAAPI_OBJECT_DEFINE_CLASS_WITH_CODE (GstVaapiWindow,
^

https://bugzilla.gnome.org/show_bug.cgi?id=759533
2017-04-11 19:22:38 +02:00
Víctor Manuel Jáquez Leal
8e8280efbf libs: window: remove surface_format member
Since we always convert to NV12, there is no need to keep a
variable for that. Let us hard code it.

https://bugzilla.gnome.org/show_bug.cgi?id=759533
2017-04-11 19:22:38 +02:00
Hyunjun Ko
c5b3577e88 libs: window: x11/wayland: use new api for conversion
Since gst_vaapi_window_vpp_convert_internal is created,
GstVaapiWindowX11/Wayland can use it for conversion.

Note that once it chooses to use vpp, it's going to use vpp
until the session is finished.

https://bugzilla.gnome.org/show_bug.cgi?id=759533
2017-04-11 19:20:38 +02:00
Hyunjun Ko
ccfbca733d libs: window: add gst_vaapi_window_vpp_convert_internal()
If a backend doesn't support specific format, we can use vpp for conversion
and make it playing.

This api is originated from GstVaapiWindowWayland and moved to GstVaapiWindow,
so that GstVaapiWindowX11 could use it.

https://bugzilla.gnome.org/show_bug.cgi?id=759533
2017-04-11 19:20:24 +02:00
Hyunjun Ko
4752f68a37 libs: window: x11/wayland: chaining up to GstVaapiWindow
Currently, GstVaapiWindowX11/Wayland are not descendants of GstVaapiWindow.
This patch chains them up to GstVaapiWindow to handle common members in GstVaapiWindow.

https://bugzilla.gnome.org/show_bug.cgi?id=759533
2017-04-11 16:41:41 +02:00
Víctor Manuel Jáquez Leal
3532dca16a libs: encoder: h265: chroma and luma with format
If the profile is main-10 the bit_depth_luma_minus8, in the sequence
parameter buffer, shall be the color format bit depth minus 8, 10-8
which is 2. Also for bit_depth_chroma_minus8.

This patch gets the negotiated sink caps format and queries its
luma's depth and uses that value to fill the mentioned parameters.

https://bugzilla.gnome.org/show_bug.cgi?id=771291
2017-04-07 12:04:51 +02:00
Víctor Manuel Jáquez Leal
d744aeb5fa libs: encoder: admit YUV420_10BPP as valid chroma
Accepts as supported the GST_VAAPI_CHROMA_TYPE_YUV420_10BPP chroma
type.

https://bugzilla.gnome.org/show_bug.cgi?id=771291
2017-04-06 22:00:05 +02:00