Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstmessage.c: (gst_message_new_async_start),
(gst_message_new_async_done), (gst_message_parse_info),
(gst_message_parse_async_start):
* gst/gstmessage.h:
Add ASYNC_START and ASYNC_DONE messages to prepare for latency
support.
Original commit message from CVS:
* tools/gst-inspect.c:
(print_plugin_automatic_install_info_codecs):
Now that we don't check for the 'Codec' keyword any longer in the
klass, we shouldn't spew a warning if the klass isn't a decoder or
encoder (since it might be a Source/Network, for example).
Original commit message from CVS:
* tools/gst-inspect.c:
(print_plugin_automatic_install_info_codecs):
Don't require decoder/demuxer/depayloader elements or
encoder/muxer/paylader elements to have 'Codec' as part of their
factory class string when introspecting a plugin's capabilities.
draft-klass.txt mentions that it might be removed in future, and
flump3dec doesn't have it as part of its class string, so chances
are others might also not have it.
Original commit message from CVS:
* gst/gstchildproxy.c: (gst_child_proxy_get_property),
(gst_child_proxy_set_property):
Invert precondition check to be alike the ones in the mimiced gobject
api.
Original commit message from CVS:
* docs/design/draft-tagreading.txt:
* docs/random/ensonic/audiobaseclasses.txt:
Do some Architect work.
* gst/gstobject.c: (gst_object_set_name):
Add a WARNING.
* gst/gstpad.c:
Add docs that point from gst_pad_get_range to gst_pad_pull_range
Original commit message from CVS:
* gst/gstsystemclock.c: (gst_system_clock_init),
(gst_system_clock_start_async), (gst_system_clock_id_wait_async):
Defer starting the async system clock thread until the first async
wait is scheduled. Fixes#414986.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_finalize),
(gst_single_queue_free):
Fix small leak (free GstSingleQueue structure too, not only contents).
Original commit message from CVS:
* gst/gstbin.c:(gst_bin_add):
Use GST_STR_NULL to prevent NULL pointer to be passed to GST_CAT_DEBUG.
* win32/common/libgstbase.def:
* win32/common/libgstreamer.def:
Add new exported functions.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_check_perfect),
(gst_identity_check_imperfect_timestamp),
(gst_identity_check_imperfect_offset), (gst_identity_transform_ip),
(gst_identity_set_property), (gst_identity_get_property):
* plugins/elements/gstidentity.h:
Separate out check-imperfect-timestamp and check-imperfect-offset.
Put back check-perfect as it was to keep compatibility.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_dispose):
There's no need to warn if VOID_PENDING is not NONE here, as
long as the state is NULL it's ok, and that's checked immediately
above.
Original commit message from CVS:
2007-03-08 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Fix check for perfect stream to ignore buffers with -1
offsets/offset ends when checking data contiguity.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_activate):
* libs/gst/base/gstbasetransform.h:
Add support for dropping buffers with custom GstFlowReturn.
Set DISCONT flags on outgoing buffers based on QoS, incomming DISCONT
buffers or dropped buffers.
* docs/libs/gstreamer-libs-sections.txt:
docs for new custom return code.
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Use drop support in base class to implement drop-probability.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Only post bus message at max, once per buffer received.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Rename non-perfect to imperfect for Mike and for the sanctity of
the language.
Also make sure bus message gets emitted for data-incontiguities.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect),
(gst_identity_start):
* plugins/elements/gstidentity.h:
Emit bus message if check-perfect is true and we encounter a
non-perfect stream between 2 consecutive buffers.
Fixes#415394.
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_transform_object_string),
(_gst_value_initialize):
Implement GstObject -> string transform so we print object names
when serializing GValues containing GstObjects.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_message_full),
(gst_element_set_locked_state), (gst_element_get_state_func),
(gst_element_change_state):
Handle INFO messages from the GST_ELEMENT_INFO macro as well.
Documentation updates.
Small code cleanups.
* gst/gstmessage.c: (gst_message_new_info),
(gst_message_parse_info):
* gst/gstmessage.h:
API: gst_message_new_info()
API: gst_message_parse_info()
Add INFO message create and parse code.
Original commit message from CVS:
* gst/gstbin.c: (bin_query_min_max_init), (bin_query_latency_fold),
(bin_query_latency_done):
Also report the live parameter of a latency query.
Original commit message from CVS:
* tests/check/generic/states.c: (GST_START_TEST), (states_suite):
Copy the current generic/states example from -base and adapt so
we can use the exact same code everywhere.
Check a STATES_IGNORE_ELEMENTS env var which can be used
to ignore certain element factories for this test, which is
what is being done in -base
* tests/check/Makefile.am:
Mention this environment variable.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbus.c: (gst_bus_init), (gst_bus_dispose), (gst_bus_post),
(gst_bus_timed_pop), (gst_bus_pop):
* gst/gstbus.h:
API: gst_bus_timed_pop()
Implement gst_bus_timed_pop() to do a blocking timed wait for a
message to arrive on the bus.
* tests/check/gst/gstbus.c: (GST_START_TEST), (pop_thread),
(gst_bus_suite):
Two unit tests for new _timed_pop() function.
Original commit message from CVS:
* gst/gstpipeline.c: (gst_pipeline_change_state),
(gst_pipeline_provide_clock_func), (gst_pipeline_set_delay):
Don't ref a NULL clock in _provide_clock_func().
Don't allow an INVALID delay.
Don't try to calculate base_time with an invalid start_time.
Also distribute and notify a NULL clock when it was selected.
* tools/gst-launch.c: (event_loop):
Don't crash when a NULL clock was selected in the pipeline.
Original commit message from CVS:
* docs/design/Makefile.am:
* docs/design/draft-missing-plugins.txt:
* docs/random/draft-missing-plugins.txt:
Some small updates: update plugin system identifier prefix
('gstreamer.net' to 'gstreamer'), mention our new install
API in libgstbaseutils rather than libgimme-codec, add
reference to the online docs.
Original commit message from CVS:
* win32/common/config.h:
Pretty sure Bill never made a powerpc version. Powerpc hackers,
use moap cl ci to only check in what is mentioned in the ChangeLog.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstelement.h:
Fix up documentation to link to the correct GstGError section.
Add GST_ELEMENT_INFO macro since someone else added a Info message.
Original commit message from CVS:
* tools/gst-launch.c: (event_loop):
Make sure that we actually show the important message part of a
warning message.
No need to check if the gerror is not NULL to free; first of all
g_free accepts NULL; and second the default error handler would
segfault if gerror was NULL.
