mirrors/gstreamer
mirrors/gstreamer
1
1
Fork 0
mirror of https://gitlab.freedesktop.org/gstreamer/gstreamer.git synced 2024-12-18 14:26:43 +00:00
Code Issues 1 Projects Releases Wiki Activity
8332 commits 44 branches 1510 tags 456 MiB
Commit graph

3926 commits

Author SHA1 Message Date
Sebastian Dröge
ad71d43f52 matroskademux: Advance sparse streams only as much as required to keep the gap smaller than 500ms 
Changing it to the newest timestamp that was ever pushed will
increase the segment start in 500ms jumps, which could be just
after the next sparse stream buffer. E.g.

Video at 1.0s, sparse stream at 0.5s would jump the
sparse stream to 1.0s. Now a new sparse stream buffer could
appear that has a timestamp of 0.9s and this would be
dropped for no good reason because of bad luck.
 2010-02-27 12:20:06 +01:00
Alessandro Decina
49b2a94644 Make sure FLUSH_STOP is sent so not to leave downstream flushing. 2010-02-24 02:05:49 +01:00
Sebastian Dröge
bcd06ea527 rtpjitterbuffer: Reset skew detection after instantiating the jitterbuffer 
...not only when going to READY. This sets high_level and friends to
a more useful value.
 2010-02-23 17:24:03 +01:00
Sebastian Dröge
0a12e69024 rtpjitterbuffer: Return 100 if high-level is 0 instead of dividing by zero 2010-02-23 17:20:02 +01:00
Wim Taymans
3a09d334a0 rtpmp4gdepay: avoid division by 0 
Avoid a division by 0 when no constantDuration was specified and when out two
timestamps are equal.

Fixes #610265
 2010-02-23 12:58:03 +01:00
Wim Taymans
e43839eae9 dvdepay: don't output frames until we have a header 
Wait for the complete first 6 header DIF packets before outputting a frame.
Decoders need this info to correctly decode the data.

Fixes #610556
 2010-02-23 12:54:36 +01:00
Tim-Philipp Müller
8c46cce875 flvdemux: minor micro-optimisation 
We know these values don't change during the loop, but the compiler
doesn't and has to re-check them for every iteration.
 2010-02-19 12:13:08 +00:00
Tim-Philipp Müller
ec9add84a8 flvdemux: remove static keyword from variables that shouldn't be static 
Multiple flvparse/flvdemux instances should be able to operate without
trampling over each other by accidentally re-using the same (static)
variables. (Spotted by Mark Nauwelaerts)
 2010-02-19 12:13:07 +00:00
Tim-Philipp Müller
07fa73f199 docs: add Since: markers for new jitterbuffer properties 2010-02-19 12:13:07 +00:00
Robert Swain
8d801f41d8 qtdemux: Fix off-by-one logic error in frame rate cap regression commit 2010-02-18 18:20:24 +01:00
Thiago Santos
f1c61e1d84 qtdemux: Use the correct duration when comparing segments 
Do not confuse QtDemuxSegments with GstSegments when
comparing the total file duration with the segment duration

Fixes #610296
 2010-02-18 07:53:34 -03:00
Robert Swain
2723de585e qtdemux: add durations modulo 1<<32 
For calculating the durations of each sample, we are supposed to add each
duration modulo 1<<32 so make the elapsed time counter a uint32.

Fixes #610280
 2010-02-17 18:06:29 +01:00
Anders Skargren
6a877b2e6d multipartdemux: improve header mime-type parsing 
Make the handing of the mime type within the "boundary" a bit less naive.
The standard for MIME allows parameters to follow the "type" / "subtype"
clause separated from the mime type by ';'.

Modifies the multipartdemuxer's header parsing so it doesnt assume
the whole line after "content-type:" is the mime type and thus makes it a bit
more resilient to finding absurd mime types in the case where parameters are
added.

Fixes #604711
 2010-02-16 21:05:24 +01:00
Wim Taymans
a0b651bf5b rtspsrc: avoid stopping NULL tasks 
Check the task for NULL, it could be paused and set to NULL before.
 2010-02-16 19:54:32 +01:00
Mark Nauwelaerts
d14685eb08 qtdemux: fix ALAC codec-data handling 
ALAC codec-data apparently comes in (at least) two flavours (mov, mp4),
so use atom based parsing to retrieve required data, rather than
aiming for a specific offset.

See also #580731.
 2010-02-16 16:22:28 +01:00
Mark Nauwelaerts
105d8c925b qtdemux: fix debug message 2010-02-16 16:09:36 +01:00
Mark Nauwelaerts
58d84a993c qtdemux: handle signed values in 3GPP location tag 2010-02-16 16:09:26 +01:00
Mark Nauwelaerts
87e80aab57 rtspsrc: fix typo in debug message 2010-02-16 16:07:21 +01:00
Mark Nauwelaerts
172c0c6a6a avidemux: reset some more stream state after seek 
In particular, fixes non-flushing seek.
 2010-02-16 15:03:59 +01:00
Robert Swain
e2f5409d40 qtdemux: Fix frame rate cap regression 
Look for a non-zero min_duration during initialisation to avoid
incorrect frame rate caps.
 2010-02-16 14:44:11 +01:00
Brian Cameron
a45b351ddf matroska: fix GST_ELEMENT_ERROR usage 
Fixes #610053.
 2010-02-16 01:40:19 +00:00
Wim Taymans
9d40d60960 rtpbin: remove use of ntp_ns_base 2010-02-15 21:36:29 +01:00
Wim Taymans
5a4ecc9da1 rtpbin: remove more ntpnstime and cleanups 
Remove some code where we pass ntpnstime around, we can do most things with the
running_time just fine.
Rename a variable in the ArrivalStats struct so that it's clear that this is the
current system time.
 2010-02-15 21:36:29 +01:00
Wim Taymans
74241e549f rtpsource: use running_time for jitter 
Use the running_time to calculate the jitter instead of the ntp time. Part of
the plan to get rid of ntpnsbase.
 2010-02-15 21:36:29 +01:00
Wim Taymans
83cb1aecc8 rtpbin: change how NTP time is calculated in RTCP 
Don't calculate the NTP time based on the running_time of the pipeline but from
the systemclock. This allows us to generate more accurate NTP timestamps in case
the systemclock is synchronized with NTP or similar.
 2010-02-15 21:36:29 +01:00
Tim-Philipp Müller
0233257612 matroska: fix printf format string 2010-02-15 10:33:02 +00:00
Tim-Philipp Müller
63c86ac3d8 raw1394, matroska, rtpmanager: remove padding from structures 
None of these element and class structures are in public headers,
so don't need padding.
 2010-02-15 00:50:10 +00:00
Edward Hervey
fa0e3184dd flvdemux: Audio tags without any content are valid. 
We silently ignore them instead of erroring out.
 2010-02-13 18:18:42 +01:00
Edward Hervey
817911664e flvdemux: Fix GST_CLOCK_DIFF usage. 
It was previously checking for DIFF(a, b > 6 * GST_SECOND) instead of
the proper DIFF(a,b) > 6 * GST_SECOND
 2010-02-13 18:07:50 +01:00
Edward Hervey
d263119589 flvdemux: Don't forget to reset the indexed variable when cleaning up 2010-02-13 16:27:07 +01:00
Edward Hervey
0dd06da5e8 flvdemux: Speedup GstIndex usage 
Used the _add_associationv variant of GstIndex since we know how many
associations we're adding. Trims up to 50% from index generation time.

Note : It would be great if the index could be generated on the fly or
on request as opposed to being fully created at startup.
 2010-02-13 14:57:59 +01:00
Wim Taymans
7f08081016 jitterbuffer: don't resync to invalid timestamps 
If we detect backward timestamps on the server, don't try to resync when we
don't have an input timestamp (such as when using RTSP over TCP) instead, do
nothing but assume the timestamp was ok, it will correct itself when time goes
forwards.
 2010-02-12 19:32:27 +01:00
Wim Taymans
d344754f03 rtpbin: fix typo 2010-02-12 17:22:56 +01:00
Wim Taymans
772eca5aff jitterbuffer: start out active and not buffering 
There is no need to set the latency in the jittebuffer in _init, we will set
that later when going to PAUSED.
Set the jitterbuffer active and not buffering when starting.
 2010-02-12 17:22:56 +01:00
Wim Taymans
8bbfd94c25 rtpbin: more buffering work 
When deactivating jitterbuffers when the buffering starts, keep the current
percent of the jitterbuffer and also set the jitterbuffer in the buffering state
so that we know when it's filled again.
Add property to get the buffering percentage of the jitterbuffer.
 2010-02-12 17:22:56 +01:00
Wim Taymans
e6e287cdcc rtpjitterbuffer: adjust latency in buffer mode 
When we are in buffer mode, adjust the buffering low/high thresholds based on
the total configured latency. If we don't and there is a huge queue or element
with a big latency downstream we might drain the complete queue immediately and
start buffering again.
 2010-02-12 17:22:55 +01:00
Wim Taymans
ab73603031 jitterbuffer: add ts-offset to timestamp 
Add the ts-offset to the buffer timestamp to get the final output timestamp of
the buffer.
 2010-02-12 17:22:55 +01:00
Wim Taymans
74a3be350d rtpbin: do more accurate buffer offsets 
Return the next timestamp in the jitterbuffer.
Use the min-timestamp of the jitterbuffers to calculate an offset so that the
next timestamp is pushed with a timestamp equal to running_time.
Start producing timestamps from 0 in the buffering case too.
 2010-02-12 17:22:55 +01:00
Wim Taymans
3efcc0fbc1 rtpbin: only start buffering when < 100% 
Only start buffering when the percentage message is < 100 %.
 2010-02-12 17:22:55 +01:00
Wim Taymans
0348ebe651 rtpbin: keep track of elapsed pause time 
Keep track of the time we spend pausing the jitterbuffers when they were
buffering and distribute this elapsed time to the jitterbuffers.
Also keep the latency in nanosecond precision.
 2010-02-12 17:22:54 +01:00
Wim Taymans
ecf6ed8fc1 jitterbuffer: keep track of offset 
Keep track of an outgoing offset that we add to each outgoing buffer to
compensate for PAUSE when buffering.
Adjust the offset when activating.
 2010-02-12 17:22:54 +01:00
Wim Taymans
048e5b6fbe jitterbuffer: report level using high watermark 2010-02-12 17:22:54 +01:00
Wim Taymans
8d814f3782 rtpbin: pass running_time to jitterbuffer pause 
Pass the current running time to the jitterbuffer when pausing or resuming so
that it calculate the right offsets.
Small cleanups and comments.
Set the default rtspsrc latency to 2 seconds.
 2010-02-12 17:22:54 +01:00
Wim Taymans
bf697b12e3 rtpbin: add some comments 2010-02-12 17:22:53 +01:00
Wim Taymans
20a27a545a rtpbin: more buffering updates 
Add signal to pause the jitterbuffer. This will be emitted from gstrtpbin when
one of the jitterbuffers is buffering.
Make rtpbin collect the buffering messages and post a new buffering message with
the min value.
Remove the stats callback from jitterbuffer but pass a percent integer to
functions that affect the buffering state of the jitterbuffer. This allows us
then to post buffering messages from outside of the jitterbuffer lock.
 2010-02-12 17:22:53 +01:00
Wim Taymans
a5b9d3f917 rtpbin: propagate buffer-mode property 
Propagate buffer-mode property to the jitterbuffers.
Intercept BUFFERING messages in rtpbin
 2010-02-12 17:22:53 +01:00
Wim Taymans
d3db9574a9 jitterbuffer: do more buffering implementation 
Add callback for buffering stats.
Configure the latency in the jitterbuffer instead of passing it with _insert.
Calculate buffering levels when pushing and popping
Post buffering messages.
 2010-02-12 17:22:52 +01:00
Wim Taymans
aeacbfed3e jitterbuffer: flesh out buffering mode some more 
Add a buffering state to the jitterbuffer and wait until buffering ends before
pushing out packets.
 2010-02-12 17:22:52 +01:00
Wim Taymans
56b29c9a6b jitterbuffer: hook up the mode property 
Expose a mode property on the jitterbuffer.
Fix the case where timestamps are -1 in the check for outgoing timestamps.
 2010-02-12 17:22:52 +01:00
Wim Taymans
be4517a6b8 jitterbuffer: add buffering mode options 
Add getters and setters for different buffering modes that the jitterbuffer will
support. Default to the current slave mode.
 2010-02-12 17:22:52 +01:00
Robert Swain
bf9d8dbbdc flvdemux: Obtain the index from the end of an flv file in push mode 
Allows for better support of seeking in flv files when in push mode
 2010-02-12 16:25:44 +01:00
Robert Swain
dd23397b4f avidemux: Drop video frames up to the desired keyframe after a seek 
The audio packets in AVI are generally muxed ~0.5s before the
corresponding video packet. This changes causes downstream to only
receive packets with roughly corresponding timestamps.
 2010-02-12 15:56:18 +01:00
Wim Taymans
1175d0698c avidemux: more DISCONT handling 
Add some debug in the DISCONT handling code.
When we receive a DISCONT in push mode, mark all streams as DISCONT.
 2010-02-12 15:56:18 +01:00
Robert Swain
0011c9b0da avidemux: Fix _handle_seek_push () and new segement behaviour 2010-02-12 15:56:18 +01:00
Wim Taymans
2ce79998a1 avidemux: cleanups 
Make sure we reset the demuxer correctly wrt parsing the index.
Don't leak pending seek events.
Rename some methods to reflect what they do and to avoid confusion with similar
method names.
Try to make the seeking threadsafe by protecting the setup code with a lock.
Make sure we post errors when a seek fails.
 2010-02-12 15:56:18 +01:00
Wim Taymans
e6cc145352 avidemux: rename some variables 
seek_event -> seg_event
event_seek -> seek_event
 2010-02-12 15:56:18 +01:00
Wim Taymans
784d888cb2 avidemux: take fallback duration from avih 
When we have not parsed any indexes yet, we don't know the length of the streams
and we must take the length given in the avih as a fallback.
Avoid some typechecking.
 2010-02-12 15:56:18 +01:00
Robert Swain
3e1ed0c727 avidemux: Push mode seeking support 2010-02-12 15:56:18 +01:00
Wim Taymans
c2dfc94b1d rtspsrc: cleanup properties 
Use more default constants.
Use static strings param flag.
Init properties explicitly instead of letting gobject do this.
 2010-02-12 15:20:07 +01:00
Stefan Kost
f003fef3ad taginject: fix multi-value tag example 
We need to use {} to specify a list.
 2010-02-12 15:35:30 +02:00
Stefan Kost
ef343d8ad9 avi,wav: also handle JUNQ chunk in addition to JUNK 2010-02-12 15:35:30 +02:00
Wim Taymans
ad6d4540a7 rtppay: don't ignore result from set_outcaps 
set_outcaps can fail and we need to propagate the result upstream.
 2010-02-12 13:53:58 +01:00
Wim Taymans
1f9c39da2a flvparse: fix confusing debug messages 2010-02-12 13:53:58 +01:00
Wim Taymans
99a581215f jitterbuffer: add some more debug info 2010-02-12 13:53:57 +01:00
Wim Taymans
caec8d9837 videomixer: fix timestamp problems 
When the pad with the highest framerate goes EOS, instead of not timestamping
output buffers, intepollate timestamps and durations from the last seen ones.

Fixes #608026
 2010-02-12 13:53:57 +01:00
Sebastian Dröge
919e93f1b2 [MOVED FROM BAD 29/29] shapewipe: Preserve the input color values in all cases 2010-02-12 11:12:35 +01:00
Sebastian Dröge
e9f9f4cfd4 [MOVED FROM BAD 28/29] shapewipe: Scale mask alpha values by the source alpha values 2010-02-12 11:12:35 +01:00
Sebastian Dröge
8786380c9a [MOVED FROM BAD 27/29] shapewipe: Fix ARGB processing 2010-02-12 11:12:35 +01:00
Sebastian Dröge
6e086c8e2f [MOVED FROM BAD 25/29] shapewipe: Improve/add debug output 2010-02-12 11:12:34 +01:00
Sebastian Dröge
4d038dc516 [MOVED FROM BAD 24/29] shapewipe: Always hold the mask mutex before signalling the GCond 2010-02-12 11:12:34 +01:00
Sebastian Dröge
e2ab650079 [MOVED FROM BAD 23/29] shapewipe: Move chain function error cases at the end of the function and add useful debug output 2010-02-12 11:12:34 +01:00
Sebastian Dröge
11a16e95e2 [MOVED FROM BAD 22/29] shapewipe: Fix race condition during shutdown that can lead to a deadlock 2010-02-12 11:12:34 +01:00
Sebastian Dröge
69b9c76dc8 [MOVED FROM BAD 21/29] shapewipe: Drop mask buffer on FLUSH events 2010-02-12 11:12:34 +01:00
Sebastian Dröge
104471f517 [MOVED FROM BAD 20/29] shapewipe: Update copyright year 2010-02-12 11:12:34 +01:00
Sebastian Dröge
a089677871 [MOVED FROM BAD 19/29] shapewipe: Don't reset properties when going PAUSED->READY 
Also use defines for the default values of the properties.
 2010-02-12 11:12:34 +01:00
Sebastian Dröge
89605b416b [MOVED FROM BAD 18/29] shapewipe: Replace floating point arithmetic in the inner processing loops by integer arithmetic 2010-02-12 11:12:34 +01:00
Sebastian Dröge
5f2e64e3a0 [MOVED FROM BAD 17/29] shapewipe: Don't do pointer dereferences in the processing loop 
Lowers the time taken there in my testcase from 6.91% to 6.20%
as measured by callgrind.
 2010-02-12 11:12:34 +01:00
Sebastian Dröge
41eed9dcca [MOVED FROM BAD 16/29] shapewipe: Add BGRA support for video in/output 2010-02-12 11:12:33 +01:00
Sebastian Dröge
9716cb9935 [MOVED FROM BAD 15/29] shapewipe: Add support for ARGB video input/output 2010-02-12 11:12:33 +01:00
Sebastian Dröge
76a21dec7f [MOVED FROM BAD 14/29] shapewipe: Correctly handle 0/1 fps 2010-02-12 11:12:33 +01:00
Sebastian Dröge
809d15428c [MOVED FROM BAD 13/29] shapewipe: Implement basic QoS 
This change is based on Tim's QoS implementation
for jpegdec.
 2010-02-12 11:12:33 +01:00
Sebastian Dröge
5fba6963ff [MOVED FROM BAD 12/29] shapewipe: Proxy queries on the video pads to the correct peers 2010-02-12 11:12:33 +01:00
Sebastian Dröge
48dd557fea [MOVED FROM BAD 11/29] shapewipe: Proxy bufferalloc on the video sinkpad 2010-02-12 11:12:33 +01:00
Sebastian Dröge
91668db57c [MOVED FROM BAD 10/29] shapewipe: Try to work inplace if possible 
This saves one new, large allocation per frame for the
most cases.
 2010-02-12 11:12:33 +01:00
Sebastian Dröge
e5d41ba407 [MOVED FROM BAD 08/29] shapewipe: Fix some issues that were exposed by the new unit test 2010-02-12 11:12:33 +01:00
Sebastian Dröge
e207e7b8a3 [MOVED FROM BAD 06/29] shapewipe: Add documentation and integrate into the build system 2010-02-12 11:12:32 +01:00
Sebastian Dröge
19a0764537 [MOVED FROM BAD 05/29] shapewipe: Adjust border to still have everything transparent at 1.0 and the other way around 2010-02-12 11:12:32 +01:00
Sebastian Dröge
88f4bd4efd [MOVED FROM BAD 04/29] shapewipe: Divide the border value by two, otherwise we use a twice a wide border 2010-02-12 11:12:32 +01:00
Sebastian Dröge
c0f9553707 [MOVED FROM BAD 03/29] shapewipe: Add border property to allow smooth borders 
...and use a border of 0.01 in the example application.
 2010-02-12 11:12:32 +01:00
Sebastian Dröge
12a27a46f9 [MOVED FROM BAD 01/29] shapewipe: Add a simple shapewipe transition filter & example application 2010-02-12 11:12:32 +01:00
Robert Swain
4aff3e48be qtdemux: temporary safety check to avoid crashes with a certain file 
Add temporary check to avoid crashes with a certain file when seeking
until the real cause of this is figured out. See #609405.
 2010-02-10 20:36:56 +00:00
Robert Swain
7877ffb6f5 qtdemux: skip unknown atoms when looking for moov 
Fixes bug #609107
 2010-02-07 10:56:02 +01:00
Robert Swain
9ed6c58006 qtdemux: Set the segment start time to the requested seek time for non-keyframe seeks 2010-02-04 18:54:58 +00:00
Robert Swain
8d4f70c5ce qtdemux: Fix time returned for index at a byte offset 
The logic for searching forwards/backwards was swapped
 2010-02-04 18:54:53 +00:00
Mark Nauwelaerts
f0d6b841a2 matroskademux: improve stream synchronization 
In particular, do not make it send newsegment updates that
sort-of contradict the indented playback segment (e.g. start time).
 2010-02-02 16:54:05 +01:00
Mark Nauwelaerts
b527360f21 matroskademux: fix bridging (time) gaps in streams 
As a side effect, avoid sending newsegment updates with start times
that go back and forth, which leads to bogus downstream running_time.

Also fixes seeking in bug #606744.
 2010-02-02 16:53:56 +01:00
Mark Nauwelaerts
9bec2b1127 matroskademux: fix stream synchronization 
.. by initializing streams starting at 0, as that is basically
where we 'seek to' at the start and assume streams to start elsewhere.
Also enables newsegment update events for subtitle streams.
 2010-02-02 16:53:51 +01:00
Wim Taymans
c35a984801 rtspsrc: free transports on errors 
See #608564
 2010-02-01 19:32:11 +01:00
Robert Swain
f9bf5970a3 flvmux: index timestamps should be in seconds, not milliseconds 2010-01-27 20:24:41 +01:00
Mark Nauwelaerts
71e35b2bf3 rtpspeexpay: fix occasional buffer leak 
Fixes #608255.
 2010-01-27 17:05:34 +01:00
Sebastian Dröge
41b17ec2a7 videomixer: Fix assembly register constraints 
Fixes bug #608209.
 2010-01-27 16:35:10 +01:00
Wim Taymans
01f0a5ce32 avidemux: ignore streams that finished 
When we receive an UNEXPECTED from a stream, move to the next stream and only go
EOS when all streams are EOS. When selecting a stream to push, ignore streams
that went EOS.

Fixes #607949
 2010-01-26 11:22:56 +01:00
Edward Hervey
cb0474b6b3 qtdemux: dmb1 is a valid fourcc for Motion-JPEG 2010-01-23 14:47:55 +01:00
Edward Hervey
a782ef3ce8 qtdeux: IV32 is also used for Indeo 3 video streams 2010-01-23 14:20:02 +01:00
Roland Krikava
8a80fdaad1 qtdemux: Avoid negative overflow on keyframe search 
Do not overflow negatively when searching a previous
"keyframe" on audio streams. Could cause infinite loops
on backwards playback

Fixes #607718
 2010-01-21 23:20:34 -03:00
Alessandro Decina
5d3d3f28e1 qtdemux: fix compiler warnings under OS X. 2010-01-21 19:24:22 +01:00
Wim Taymans
7d39f8e5bb avidemux: don't parse NULL indexes 
for some streams we might fail to fetch the index offsets. Don't try to parse
NULL indexes in those cases.
 2010-01-21 17:59:25 +01:00
Olivier Crête
9afc247906 rtpg729pay: ptime should is in nanoseconds 
https://bugzilla.gnome.org/show_bug.cgi?id=607403
 2010-01-21 10:54:14 +01:00
Thiago Santos
ef2b7bbcab wavenc: Post warning if file isnt finished properly 
When the pipeline is shut down and the file isn't
finished properly, wavenc should post a warning.

Fixes #607440
 2010-01-20 15:11:15 -03:00
Arnout Vandecappelle
ca41ddda75 matroskamux: make index size configurable. 
Added the 'min-index-interval' property to matroskamux,
which determines how much time (nanoseconds) is left
between keyframes stored in the index.

Fixes #583985.
 2010-01-20 14:37:20 -03:00
Wim Taymans
1f6b06ce66 rtph264pay: scale spspps_interval to milliseconds 
The spspps_interval is kept in seconds. Convert it to milliseconds before
comparing it to another value in milliseconds.
 2010-01-20 16:29:57 +01:00
Mark Nauwelaerts
8ca984d5e8 qtdemux: always keep media segments within total duration 
... as opposed to only doing so following a seek.
 2010-01-20 16:03:21 +01:00
Wim Taymans
95333115cd rtph264pay: rename spspps-interval property 
Rename the spspps-interval property to config-interval because it is nicer.
 2010-01-20 15:44:40 +01:00
Wim Taymans
afc3c674c0 avidemux: skip RIFF and index in push mode 
When we are in push mode, we can encounter RIFF and idx tags in the data chunk
when we are dealing with ODML files. In these cases, simply skip the chunks and
continue streaming instead of going EOS.
 2010-01-20 11:47:04 +01:00
Wim Taymans
570319822a avidemux: more DISCONT handling 
Add some debug in the DISCONT handling code.
When we receive a DISCONT in push mode, mark all streams as DISCONT.
 2010-01-20 11:47:04 +01:00
Wim Taymans
40e3b0189a avidemux: reset on flush events 
When we receive a flush event on the sinkpad, reset the EOS state and the
flowreturn of all streams. Also mark the streams with a DISCONT.
 2010-01-20 11:47:03 +01:00
Wim Taymans
183d450113 avidemux: rename some variable 
Rename the seek_event variable to seg_event because it really contains the
newsegment event that needs to be pushed.
 2010-01-20 11:47:03 +01:00
Olivier Crête
c4fa559f15 rtph264pay: Don't set profile-level-id in out caps 
The profile-level-id represents restrictions on what can be sent, it does not
describe the stream. So it should be reflected in the sink caps of the
payloader, not the src caps.

https://bugzilla.gnome.org/show_bug.cgi?id=607353
 2010-01-19 13:47:38 +01:00
Olivier Crête
7a0590b1f1 rtph264pay: Don't ignore the return value from set_outcaps 
https://bugzilla.gnome.org/show_bug.cgi?id=607353
 2010-01-19 13:35:37 +01:00
Sebastian Dröge
2261bd8346 deinterlace: Fix license and copyright headers 2010-01-18 17:44:17 +01:00
Wim Taymans
fb716a6250 avidemux: avoid some typecasting 2010-01-15 18:15:14 +01:00
Wim Taymans
592b440911 avidemux: avoid some type checks 2010-01-15 18:13:24 +01:00
Wim Taymans
d4301d900f avidemux: fallback to avih duration 
when we have not yet parsed the indexes (in push mode, for example) use
the duration as given in the avih header instead of -1.
 2010-01-15 18:09:15 +01:00
Thiago Santos
e61a71b490 qtdemux: g_free is NULL safe 2010-01-15 13:42:30 -03:00
Thiago Santos
b07f406634 qtdemux: use DEMUX errors, instead of DECODE 
qtdemux should use DEMUX errors, and not DECODE

Conflicts:

	gst/qtdemux/qtdemux.c
 2010-01-15 13:42:30 -03:00
Thiago Santos
b988ff4f57 qtdemux: Minor refactor 
Replace repeated code with a function call
 2010-01-15 13:42:30 -03:00
Thiago Santos
92a83e016a qtdemux: Handle another kind of redirect trak 
Some traks might contain a redirect rtsp uri inside
hndl atom (which is a dref atom entry). This commit makes qtdemux
post a message when it finds one of these traks and there are
no other traks.

Fixes #597497
 2010-01-15 13:42:29 -03:00
Thiago Santos
06de494640 qtdemux: Post error when reaching EOS without pads 
Post an error when EOS is reached and there are no src pads
 2010-01-15 13:42:22 -03:00
Thiago Santos
b53a45ed44 qtdemux: Do not post empty redirect messages 
Some misinterpreted data could result in posting redirect messages
with empty redirect strings. It is better not to post them.

An example is the file on bug #597497
 2010-01-15 13:13:59 -03:00
Mark Nauwelaerts
891ca1f4d3 matroskademux: polish last buffer end time usage 
That is, reset it upon seek, and note that (rarely) last pushed buffer
time might precede segment start.
 2010-01-14 18:19:25 +01:00
Stefan Kost
404e673ac0 videomixer: use 'q' constraint instead of 'r' 
This avoids the "bad register name `%dil'" compilation errors on 32bit where
because of 'r' gcc puts the value in a general purpose register and then tries
to access the lower part as %dil/%sil which is not existing on 32bit. 'q' requests
a-d registers
 2010-01-13 16:48:46 +02:00
Stefan Kost
7e3783cbac avi: add missing include for sscanf 2010-01-13 16:44:58 +02:00
Sebastian Dröge
4a0f441c59 equalizer: Fix property description for the 3rd band of the 10band equalizer 
The frequency is actually 237 Hz, not 227 Hz.

Fixes bug #606692.
 2010-01-13 09:36:03 +01:00
Kipp Cannon
d009678bc5 audioamplify: Allow negative amplifications 
Fixes bug #606807.
 2010-01-13 09:22:20 +01:00
Edward Hervey
3f5add8820 qtdemux: use G_GSIZE_FORMAT for platform independent gsize qualifier 
Fixes build on macosx
 2010-01-12 17:39:05 +01:00
Mark Nauwelaerts
59224d77f8 matroskademux: refactor eos sending when pausing loop 
Also, prevent hanging if no pads yet on which to send eos by
posting a message instead.
 2010-01-11 21:15:47 +01:00
Mark Nauwelaerts
ae515fead4 matroskademux: standardize seek handling 
... which implies fixing some corner cases.
 2010-01-11 21:15:46 +01:00
Mark Nauwelaerts
927c22bdc4 matroskamux: use more generic xiphN_streamheader_to_codecdata helper 2010-01-11 21:15:43 +01:00
Mark Nauwelaerts
847d1dd4ed matroskamux: reflow audio and video setcaps and improve logging 
Also ensure width and height are available as they are mandatory
in matroska specs.
 2010-01-11 21:15:41 +01:00
Michael Smith
144fbd2d8f qtdemux: fix offset for type 2 mp4a sound sample descriptions. 
Allows us to correctly find the esds (and thus the codec data) for such
mp4a files.
 2010-01-11 11:48:29 -08:00
Thiago Santos
fa32e08d91 rtpmp4g(de)pay: Only handle raw aac 
rtpmp4g(de)pay should only handle raw AAC streams
 2010-01-11 15:46:50 -03:00
Sebastian Dröge
daa52708b3 videomixer: Implement basic QoS 
This drops frames if they're too late anyway before blending and all
that starts but QoS events are not forwarded upstream. In the future
the QoS events should be transformed somehow and forwarded upstream.
 2010-01-11 19:32:35 +01:00
Thiago Santos
c563dd7eb2 rtpmp4a(de)pay: Only accept raw aac 
rtpmp4a(de)pay should only handle raw aac to conform to the RFC
 2010-01-11 15:00:00 -03:00
Sebastian Dröge
6158f401a1 videomixer: Add MMX implementations for I420 and all non-alpha RGB formats 2010-01-11 18:37:45 +01:00
Sebastian Dröge
2950262186 videomixer: Refactor processing functions 
This allows easier plugging of optimized processing functions
in the future, like for SSE or AltiVec.
 2010-01-11 18:37:44 +01:00
Thiago Santos
5975b01b01 avimux: matroskamux: rename aac's stream-format to raw 
AAC's none stream-format has been renamed to raw, rename
on avimux and matroskamux as well
 2010-01-11 13:26:32 -03:00
Thiago Santos
1314853210 matroskamux: Only accept raw aac 
makes matroskamux reject aac streams that are not
in raw format (stream-format=none)

Fixes #598350
 2010-01-11 12:32:29 -03:00
Thiago Santos
bacd350483 avimux: Only accept raw aac 
makes avimux reject aac streams that are not
in raw format (stream-format=none)

Fixes #598350
 2010-01-11 12:32:27 -03:00
Robert Swain
866d13e7b9 qtdemux: Oops. The gpointer cast is needed because of the const 
qualifiers on the data elements
 2010-01-11 10:38:10 +01:00
Robert Swain
4ac643c2d9 qtdemux: Debug -> info level for a message for benchmarking index parsing 
The extra message output at higher levels affects the accuracy of the
benchmark.
 2010-01-11 10:17:54 +01:00
Robert Swain
c93ea637ef qtdemux: Don't check for NULL pointers or cast to gpointer as this is 
not needed
 2010-01-11 10:05:10 +01:00
Robert Swain
a340359127 qtdemux: Refactor stbl sub-atom freeing. Free when index has been 
completely parsed.
 2010-01-11 09:50:33 +01:00
Robert Swain
3daf1871c1 qtdemux: Avoid whitespace commits due to inconsistent GNU indent 
behaviour
 2010-01-11 09:50:33 +01:00
Tim-Philipp Müller
e1bff64f00 qtdemux: remove newline at end of debug statement 2010-01-11 00:10:34 +00:00
Havard Graff
4ead3d85bf multiudpsink: Compiler warning fixes for Windows 
Just simple missing casts

Fixes bug #606438.
 2010-01-09 17:17:23 +01:00
Thiago Santos
8e84d457b2 avidemux: Use more glib and be safer 
Be safer on sscanf by limiting string format sizes.
Remove useless parameter and use g_strndup.
 2010-01-08 11:33:02 -03:00
Thiago Santos
c0e184641a avidemux: Simplifying code 
Greatly simplify the IDIT chunk handling by using sscanf
instead of 'manually' parsing. Also replaces strncasecmp and
is_alpha/is_digit with glib versions.
 2010-01-08 10:51:17 -03:00
Thiago Santos
7024ce14cf avidemux: it's feb for february 
Fix typo in last commit.
 2010-01-08 10:18:30 -03:00
Thiago Santos
a5197a94ee avidemux: Parse and post IDIT dates 
Parses and post date tags contained in IDIT chunks.

Fixes #503582
 2010-01-08 09:17:22 -03:00
Sebastian Dröge
a9a5e0c7e1 audiofxbasefirfilter: Add property for not draining the history on kernel changes 
Currently this only works if the kernel size doesn't change, in the future
it will be possible to change the kernel size too without draining
the complete history and without loosing anything.

Partially based on a patch by
Thiago Santos <thiago.sousa.santos@collabora.co.uk>
 2010-01-07 17:28:43 +01:00
Wim Taymans
ed22a97478 rtph264pay: remove weird memcmp code 
Use plain memcmp for comparing memory instead of the custom buggy one.

Fixes #606198
 2010-01-07 17:00:20 +01:00
Edward Hervey
3e08a0cb4e level: fix typo in 'message' property description 2010-01-07 15:38:36 +01:00
Wim Taymans
4c1947045e rtpg728pay: remove unused adapter peek 2010-01-06 13:45:59 +01:00
Michael Smith
7f442ab1c1 qtdemux: Add support for wave-style audio in qt. 
Uses gstriff to parse the wave headers appropriately. Tested with MS-ADPCM
content.
 2010-01-05 12:11:31 -08:00
Olivier Crête
63a9db5826 rtpg729pay: Simplify adapter usage 
https://bugzilla.gnome.org/show_bug.cgi?id=606050
 2010-01-05 13:23:26 -05:00
Olivier Crête
0a18587792 rtpg729pay: Support ptime from caps 
https://bugzilla.gnome.org/show_bug.cgi?id=606050
 2010-01-05 13:23:26 -05:00
Olivier Crête
321829f595 rtp: Add maxptime to the README 
https://bugzilla.gnome.org/show_bug.cgi?id=606050
 2010-01-05 13:23:26 -05:00
Wim Taymans
b32ddfc174 rtpg723depay: add G723 depayloader 2010-01-05 19:03:06 +01:00
Wim Taymans
ca7ecdf2f3 rtpg729depay: remove unused variable 2010-01-05 19:02:39 +01:00
Wim Taymans
d6d06630e8 rtpg723pay: rewrite payloader 
Handle all 3 packet sizes according to RFC 3551.
Totally untested, we don't have a G723 encoder.

Fixes #605882
 2010-01-05 18:33:25 +01:00
Wim Taymans
48615d5e98 qtdemux: fix chunk counter 2010-01-05 15:51:55 +01:00
Wim Taymans
17630760f4 qtdemux: more work at reducing loop overhead 
Try to avoid derefs when parsing the index. Save the state into the structures
when we exit the loop instead of for each iteration.
 2010-01-05 15:51:52 +01:00
Wim Taymans
91a5e5138f qtdemux: cleanups and make duration more accurate 
Make the QtDemuxSample struct smaller by keeping the duration and the pts_offset
as their 32 bit values.
Make some macros to calculate PTS, DTS and duration of a sample.
Deref the sample index less often by keeping a ref to the sample we're dealing
with.
 2010-01-05 15:51:50 +01:00
Wim Taymans
22eb18f828 qtdemux: simplify logic to calculate duration 
Since we no longer store the timestamp and duration in nanoseconds, we can now
simply store the duration as-is.
 2010-01-05 15:51:48 +01:00
Robert Swain
1c27ed4dae qtdemux: Store timestamps in mov format in the index 
This allows faster building of the index upon seeks so that scaling of
timestamps only occurs when actually needed.
 2010-01-05 15:51:45 +01:00
Wim Taymans
86021857c5 qtdemux: make seeking in push mode work 
Move sample position checks into qtdemux_parse_samples where we can protect it
with a lock.
Refactor and make an qtdemux_ensure_index function.
Rename qtdemux_do_push_seek to qtdemux_seek_offset in order to avoid confusion
with gst_qtdemux_do_push_seek.
 2010-01-05 15:51:43 +01:00
Wim Taymans
3b643817be qtdemux: move error code out of normal flow 2010-01-05 15:51:40 +01:00
Robert Swain
4b2b7067b6 qtdemux: Add push mode seek support for seeking to obtain the moov atom 2010-01-05 15:51:36 +01:00
Wim Taymans
8c5a822250 rtspsrc: fix on-npt-stop signal warnings for RDT 
The RDT manager does not implement this signal so we need to check for it before
trying to connect to it.
 2010-01-05 12:23:16 +01:00
Stefan Kost
fd9530d2d5 avimux: fix typo in warning message 2010-01-05 00:12:44 +02:00
Arun Raghavan
e9f9164fb6 qtdemux: Add tags for average and maximum bitrate 
Fixes #599300.
 2009-12-31 18:25:20 +00:00
Thiago Santos
173be1422c audiofxbasefirfilter: do not try to alloc really large buffers 
When nsamples_out is larger than nsamples_in, using unsigned
ints lead to a overflow and the resulting value is wrong and
way too large for allocating a buffer. Use signed integers
and returning immediatelly when that happens.
 2009-12-26 16:59:14 -03:00
Wim Taymans
362785df88 videomixer: optimize blend code some more 
Use more efficient formula that uses less multiplies.
Reduce the amount of scalar code, use MMX to calculate the desired
alpha value.
Unroll and handle 2 pixels in one iteration for improved pairing.
 2009-12-25 12:38:45 +01:00
Wim Taymans
4f9ded7742 videomixer: scale and clamp 
Scale and clamp to the max alpha values.
 2009-12-24 22:59:09 +01:00
Wim Taymans
0620797a18 alpha: scale and clamp alpha to its full extend 
Convert the alpha value to 0->255 when setting and to 0->256 when using as
a scaling factor. This makes sure we can reach the full opacity value of 0xff in
all cases.
 2009-12-24 22:50:31 +01:00
Wim Taymans
a65240d1c1 rtspsrc: fix some comments, remove property check 
Fix some comments, clarify some FIXMEs
Remove the on-ntp-stop signal check now that the jitterbuffer is in
-good and we know that it supports this signal.
 2009-12-24 22:23:01 +01:00
Wim Taymans
3c0f18d765 videomixer: some trivial cleanups 2009-12-24 21:45:12 +01:00
Thiago Santos
ac03ad782a rtspsrc: Parse all rtpinfo entries 
Do not forget to parse all rtp-info entries, instead of
parsing the first one only.

Fixes #605222
 2009-12-24 17:08:22 -03:00
Thiago Santos
5d86010dad qtdemux: perf tag should map to GST_TAG_ARTIST 2009-12-24 17:06:16 -03:00
Wim Taymans
fe529e71c5 interleave: fix weird indentation 2009-12-24 17:03:02 +01:00
Wim Taymans
59dc9dac03 rtph263ppay: use faster _adapter_copy() whem possible 2009-12-24 17:01:54 +01:00
Mark Nauwelaerts
05307c46e7 rtph264pay: fix uninitialized variable 2009-12-23 19:39:05 +01:00
Wim Taymans
9f098b352b rtp: use boilerplate 2009-12-23 13:09:54 +01:00
Wim Taymans
2ee7f58416 rtpL16pay: convert to baseaudiopayload 
Use GstRTPBaseAudioPayload as the base class. This saves a lot of code and fixes
a bunch of problems that were already solved in the base class.

Fixes #853367
 2009-12-23 00:38:05 +01:00
Wim Taymans
cdb8c718bb rtppcmapay: the boilerplate macro sets parent_class 2009-12-23 00:30:49 +01:00
Wim Taymans
05418f1687 rtpbin: avoid some structure copies 
Don't make copied in the getter and setter for SDES in the RTPSource. This
avoids a couple of copies of the SDES structure when generating RTCP
packets.
 2009-12-22 22:27:21 +01:00
Pascal Buhler
c3448f978e rtpmanager: improve SDES handling 
Store SDES internally as a struct to support multiple PRIV values.
Include all values set in SDES struct when sending RTCP SDES.
 2009-12-22 21:43:25 +01:00
Wim Taymans
251401aef1 rtph263depay: add some fixmes 2009-12-22 14:41:35 +01:00
Wim Taymans
564581e1b8 rtph263depay: baseclass handles timestamps for us 2009-12-22 14:35:13 +01:00
Wim Taymans
27ff4a8a47 rtph263depay: reset start variable properly 2009-12-22 14:27:40 +01:00
Marco Ballesio
74b3439374 Drop the whole frame if a packet is lost. 
Fixes #582575
 2009-12-22 11:48:52 +01:00
Wim Taymans
4687199348 rtph264pay: add option to insert PPS/SPS in streams 
Add a new spspps-interval property to instruct the payloader to insert
SPS and PPS at periodic intervals in the stream.
Rework the SPS/PPS handling so that bytestream and AVC sample code both use the
same code paths to handle sprop-parameter-sets. This also allows to have the AVC
code to insert SPS/PPS like the bytestream code.

Fixes #604913
 2009-12-21 20:45:54 +01:00
Jonathan Conder
1112090589 qtdemux: Adds new tags 
Adds some new tags mapping to qtdemux.

Fixes #599759
 2009-12-21 12:03:30 -03:00
Wim Taymans
9734699788 rtpbin: add property to remove pads automatically 
Add a property called autoremove to automatically remove the pads of sources
that timed out.

Fixes #554839
 2009-12-21 15:07:44 +01:00
Wim Taymans
c611bbaa8e ssrcdemux: fix comparison 
A NULL means no pad was found.
 2009-12-21 15:07:34 +01:00
Michael Smith
eab08d67b3 multiudpsink: pass length parameter to g_convert 2009-12-20 17:26:15 -08:00
Edward Hervey
188725811f matroska: Fix unitialized variable. 
Yes, it's stupid, but macosx compilers are even more stupid.
 2009-12-18 12:46:06 +01:00
Sebastian Dröge
3ac6f5e48b videomixer: Fix assembly compilation on x86 
Fixes bug #604814.
 2009-12-17 18:14:55 +01:00
Branko Čibej
7b107f64f3 rganalysis: fix timestamp rounding 
Use scaling function to round and avoid overflows.

Fixes #604352
 2009-12-17 17:37:03 +01:00
Tiago Katcipis
908a9ee63b rtp: add G723 payloader 
Fixes #597823
 2009-12-17 17:27:42 +01:00
Wim Taymans
cc277b4a26 qtdemux: Fix ALAC codec_data parsing 
Fixes #604611
 2009-12-17 16:23:56 +01:00
Thiago Santos
4063bb87e8 qtdemux: Remove cpp style coments 
Removes // comments and replace them with /* */ comments
 2009-12-16 17:28:30 -03:00
Mark Nauwelaerts
c9a0d2339e matroskademux: also consider BlockNumber indicated in index when seeking 2009-12-16 12:48:02 +01:00
Mark Nauwelaerts
900ff7247e matroskademux: support push based mode 
Fixes #598610.
 2009-12-16 12:46:40 +01:00
Mark Nauwelaerts
e4183c6904 matroskademux: fix ebml read cache usage 2009-12-16 12:46:37 +01:00
Sebastian Dröge
0a0f7ecc16 videomixer: Use movzbl instead of movzxb for moving one byte to a l register 
For some reason latest gcc/binutils accept movzxb here while
movzbl would be correct and is the only thing accepted by older
gcc/binutils.

Fixes bug #604679.
 2009-12-16 10:50:32 +01:00
Sebastian Dröge
9e45038d8d videomixer: src/dest are input and output of the AYUV blending MMX assembler 2009-12-16 06:59:01 +01:00
Sebastian Dröge
c26ccb9722 audiowsincband: Use the same upper length limit as audiowsinclimit 2009-12-15 18:18:54 +01:00
Sebastian Dröge
7fec6843c0 audiowsinc{limit,band}: Allow much larger filter lengths now 2009-12-15 18:12:47 +01:00
Sebastian Dröge
119a6ce637 audiofxbasefirfilter: Fix frequency response calculation 2009-12-15 18:12:47 +01:00
Sebastian Dröge
8695581751 audiofxbasefirfilter: Remove dead assignments 2009-12-15 18:12:46 +01:00
Sebastian Dröge
cd2b1c1b58 audiofxbasefirfilter: Add special processing functions for Mono/Stereo 
This provides another 7% speedup for the time domain convolution and 1.5%
speedup for the FFT convolution on Mono input.

This optimization assumes that the compiler simplifies calculations
and conditions on constant numbers and unrolls loops with a constant
number of repeats.
 2009-12-15 18:12:46 +01:00
Sebastian Dröge
a3d7321c50 audiofxbasefirfilter: Add a "low-latency" mode 
This will always use time-domain convolution, which lowers the latency.
With FFT convolution it's always a multiple of the kernel length,
with time domain convolution it's only the pre-latency of the filter kernel.
 2009-12-15 18:12:46 +01:00
Sebastian Dröge
ca568ff079 audiofxbasefirfilter: Remove obsolete TODO comments 2009-12-15 18:12:46 +01:00
Sebastian Dröge
45edc1bbd8 audiofxbasefirfilter: Use samples everywhere instead of samples*channels sometimes 2009-12-15 18:12:46 +01:00
Sebastian Dröge
02960383c1 audiofxbasefirfilter: FFT convolution implementation 
This provides a great speedup, especially the relationship between kernel
length and processing size is now logarithmic instead of linear. Below a
kernel size of 32 it's a bit slower, afterwards it's much faster:

17     0.788000 -> 0.950000
33     1.208000 -> 1.146000
65     2.166000 -> 1.146000
...
4097 107.444000 -> 1.508000

For sizes smaller 32 the normal time-domain convolution is chosen,
for larger sizes the FFT convolution is automatically used.

Fixes bug #594381.
 2009-12-15 18:12:46 +01:00
Sebastian Dröge
ddafc20b28 audiofxbasefirfilter: Make most code parts independent of the processing functions and used convolution algorithm 
Only remaining part is the residue pushing, which will be fixed later.
 2009-12-15 18:12:46 +01:00
Sebastian Dröge
43576fb0cf audiofxbasefirfilter: Optimize time-domain convolution 
Remove some redundant calculations, move comparisions out of
inner loops, etc.

This makes the convolution about 3 (!) times faster but
processing time is of course still proportional to the
filter size.
 2009-12-15 18:12:46 +01:00
Sebastian Dröge
c5f955a3b6 audiofxbasefirfilter: Use _CAST macros in some places and do some calculations only once 2009-12-15 18:12:46 +01:00
Sebastian Dröge
abb437454e audiofxbasefirfilter: Rewrite timestamp tracking 
It's much simpler now and doesn't introduce accumulating rounding
errors.
 2009-12-15 18:12:46 +01:00
Sebastian Dröge
c57be62881 audiofxbasefirfilter: Rename some variables and change comments 2009-12-15 18:12:45 +01:00
Sebastian Dröge
742a7c7f50 audiofxbasefirfilter: Add const qualifier to the source data array 2009-12-15 18:12:45 +01:00
Sebastian Dröge
061ededa36 videomixer: Add MMX implementations of the AYUV blending and color filling functions 
This provides a 20% speedup for blending and 100% for color filling.

The blending can probably be optimized even more.
 2009-12-15 12:30:21 +01:00
Tim-Philipp Müller
d3a9f07669 id3demux: prefer two letter ISO 639-1 code for extended comment 2009-12-13 13:19:43 +00:00
Tim-Philipp Müller
6c4c8f8670 qtdemux: fix up language code extraction some more 
Quicktime uses ISO 639-2 for language codes, but GST_TAG_LANGUAGE
is supposed to hold a ISO 639-1 code, so convert as needed using
the new API from -base.

See #602126.
 2009-12-13 13:10:12 +00:00
Tim-Philipp Müller
b66f914586 matroska: fix language code writing and extraction 
Matroska uses three-letter ISO 639-2B codes, but GST_TAG_LANGUAGE is
supposed to contain two-letter ISO 639-1 codes, so use new language
code mapping functions in -base to convert between those two as
needed.

Fixes #505823.
 2009-12-13 12:51:13 +00:00
Tim-Philipp Müller
1b786258c2 avidemux: minor debug message changes 
Fix up a few debug messages so that it's clearer what they mean.
 2009-12-13 12:51:13 +00:00
Thiago Santos
52177fa056 Revert "qtdemux: Correctly parse classification tags" 
This reverts commit cd883aa60c.

Previous code was correct, 4 is due to table and language code,
not only language code
 2009-12-12 17:44:04 -03:00
Thiago Santos
cd883aa60c qtdemux: Correctly parse classification tags 
In clsf atoms, the language code is 2 bytes long, not 4.
 2009-12-12 16:31:35 -03:00
Sebastian Dröge
66d3ac8fb7 videomixer: Dequeue current buffer on FLUSH_STOP and don't unref NULL buffers 
... NULL buffers shouldn't really happen anymore when popping the
buffer from GstCollectPads but better check for this and print a warning.
 2009-12-12 16:55:13 +01:00
Sebastian Dröge
760eaf7b2a videomixer: Fix stupid mistake in last commit 2009-12-11 13:11:12 +01:00
Sebastian Dröge
089d9d9dba videomixer: Don't do floating point math in the inner processing loop for I420 blending 2009-12-11 12:36:42 +01:00
Wim Taymans
b8c2ccce4e rtspsrc: handle NULL and empty transport strings 
When an RTSP extension returns NULL or an empty transport string, just ignore it
and try to get the next possible transport. Fixes playback of RealMedia streams.
 2009-12-10 18:45:55 +01:00
Wim Taymans
6a44d8e198 rtspsrc: install event function on internal RTCP pad 
Install a custom event function on the internal RTCP pad so that we can reply
TRUE to a latency event.
 2009-12-10 18:45:55 +01:00
Sebastian Dröge
6f51dfba95 videomixer: Remove wrong comments, copied from the I420 blend function 2009-12-10 10:48:49 +01:00
Sebastian Dröge
93089ef445 videomixer: The queued duration is a signed integer 
...and it will really be negative sometimes.
 2009-12-09 21:15:07 +01:00
Sebastian Dröge
7418dee253 videomixer: Only pop buffers from collectpads after they're fully consumed 
This decreases latency and memory usage because new buffers are only
accepted by collectpads if there's no queued buffer.
 2009-12-09 21:03:57 +01:00
Sebastian Dröge
cd888c0531 matroskademux: Clean up position/duration handling 
Also use the last end time for closing the segment, not the
start time of the last buffer.
 2009-12-09 20:42:44 +01:00
Sebastian Dröge
0766a54138 matroskademux: Close the segment on EOS if the real duration is known 2009-12-09 16:50:02 +01:00
Sebastian Dröge
5ca96043ff matroskademux: Update duration if current buffer is already after the old duration 2009-12-09 16:46:18 +01:00
Sebastian Dröge
c9b1ab53fe matroskademux: Drop buffers that are after segment stop 
...and if this happened for all streams go EOS.
 2009-12-09 16:43:41 +01:00
Sebastian Dröge
276a61ab2a matroskademux: Fix position tracking and sending of filler segments 2009-12-09 16:41:04 +01:00
Sebastian Dröge
b0f8978fd8 videomixer: Use gst_util_uint64_scale_int() for fps to seconds per frame calculations 2009-12-09 16:15:09 +01:00
Sebastian Dröge
3ddb75e3c5 matroskademux: Keep the segment stop position for update newsegment events 2009-12-08 17:34:15 +01:00
Wim Taymans
ee6d7fd2db avidemux: init current_entry in push mode 
Set the current_entry to 0 (instead of -1) in push mode so that we correctly
calculate the current frame number and timestamp.

Add some more debug info and fic the duration debug.
 2009-12-04 13:52:49 +01:00
Tim-Philipp Müller
24b93d82ec rtspsrc: fix major memory leak when playing back rtsp video streams 
Don't forget to unref QoS, navigation and latency events when
dropping them.
 2009-12-04 11:14:03 +00:00
Tim-Philipp Müller
d0b25845ec matroskademux: only send pending tags with newsegment events 
Send pending tags only from the streaming thread, just after we've sent
the newsegment event, not with e.g. flush-start. This not only does the
right thing, but also makes sure we're not trampling over variables set
up in the streaming thread from the seeking thread in case someone tries
to issue a seek just as the demuxer is parsing the headers.

Fixes #601617. Spotted by Ognyan Tonchev.
 2009-12-04 11:13:31 +00:00
Thiago Santos
ff4ac9ddf6 qtdemux: fix debug message printf args 
Fixes debug message printf format to make it build in mac's gcc
 2009-12-03 17:49:55 -03:00
Aurelien Grimaud
07f27f0efd rtpsession: avoid buffer ref/unref pairs for CSRCs 
We ref the buffer before pushing it downstream in order to get the CSRCs of it
after pushing. This causes performance problems when downstream elements want to
change the metadata because the buffer needs to be subbuffered.

Instead, read and store the CSRCs of the buffer in an array before pushing it
and process the array after pushing the buffer. This allows us to remove the
ref/unref pair.

Fixes #603376
 2009-11-30 15:59:50 +01:00
Mark Nauwelaerts
e49e71a1d9 rtph264depay: optionally merge NALUs into Access Units 
... which may be expected/desired by some downstream decoders
(and spec-wise highly recommended for at least non-bytestream mode).
 2009-11-26 17:29:26 +01:00
Mark Nauwelaerts
baa28ddedf qtdemux: fix timestamp datatype 2009-11-26 17:29:03 +01:00
Wim Taymans
8070ae967b jitterbuffer: avoid using wrong clock-rate 
Check for a valid clock-rate before attempting to estimate the npt
stop time.
 2009-11-25 10:38:23 -06:00
Wim Taymans
5682e2bf01 rtpbin: fix typo in comments 2009-11-25 10:37:30 -06:00
Michael Smith
9d6adc8f3c multiudpsink: return error message on windows too. 2009-11-24 11:13:06 -08:00
Michael Smith
d4826d987c multiudpsink: first phase of fixing up error reporting for windows. 2009-11-24 10:58:49 -08:00
Thiago Santos
b59dc3e5fb avimux: also set the suggested buf size for audio 
We were only setting the suggested buf size for video,
we can set it for audio as well.

This and 195e14529d80ef318ce3a778c1995efb11f266cd
fix an issue that prevented seeking on large avi files
on WMP (non-recent versions).
 2009-11-24 12:44:57 -03:00
Thiago Santos
831b1e958a avimux: fix indx duration for PCM audio 
GstBuffers for PCM audio usually contains more than
1 sample, we need to get the total number of samples to set
the indx duration.
 2009-11-24 12:44:56 -03:00
Thiago Santos
8dd78015f1 avimux: Audio buffers should be picked earlier 
Adds a 0.5s advantage for audio buffers to being
picked earlier for muxing.
 2009-11-24 12:44:56 -03:00
Robert Swain
98279be735 qtdemux: Fix push mode by making sure stbl information is available in 
next_entry_size ()
 2009-11-24 16:40:19 +01:00
Robert Swain
db5de8f1b6 qtdemux: Fix order of arguments in log message 2009-11-24 16:35:20 +01:00
Robert Swain
f9745e89d3 qtdemux: Ease debugging by removing a goto for an error message 2009-11-23 16:29:15 +01:00
Robert Swain
4025d7cbd7 qtdemux: Parse per sample rather than all at once but build complete index when 
seeking
 2009-11-23 16:29:15 +01:00
Robert Swain
0c62109d20 qtdemux: Save atom data for later use so it doesn't get freed after initial 
parsing
 2009-11-23 16:29:15 +01:00
Robert Swain
29c33806c1 qtdemux: Parse from the previously parsed sample up to sample n 2009-11-23 16:29:14 +01:00
Robert Swain
52b1040219 qtdemux: Make qtdemux_parse_samples () parse up to n samples 2009-11-23 16:29:14 +01:00
Robert Swain
1f7b878d89 qtdemux: Separate off stbl sub-atom initialisation 2009-11-23 16:29:14 +01:00
Robert Swain
6a6d2c4970 qtdemux: Move variables into context in preparation for refactorisation 2009-11-23 16:29:14 +01:00
Robert Swain
ab61fb22f6 qtdemux: Fix bug where stps is never parsed due to logic error 2009-11-23 16:29:14 +01:00
Robert Swain
a1e2047472 qtdemux: Port ctts from Gnode * to GstByteReader 2009-11-23 16:29:14 +01:00
Robert Swain
9e49197208 qtdemux: Switch from QtAtomParser to GstByteReader 2009-11-23 16:29:14 +01:00
Wim Taymans
5d41590601 qtdemux: fix typo and grammar 2009-11-23 12:53:50 +01:00
Tim-Philipp Müller
5908c40405 deinterlace: fix typo in mode enum description 2009-11-20 10:30:00 +00:00
Stefan Kost
9ee0815e85 docs: more links and better short description 
Fix spelling of GstRtpSsrcDemux to get it linked. Add more links. Change
the short description to be more meaningful.
 2009-11-20 11:25:49 +02:00
Thiago Santos
e35085e5b5 qtdemux: Add more fields to SVQ3 caps 
qtdemux only added the whole stsd atom as 'codec_data'
in its output caps for SVQ3. This patch makes it add
the SEQH (inside a SMI atom) and a gamma field (taken
from the gama atom) if available.

Fixes #587922
 2009-11-18 16:41:50 -03:00
Edward Hervey
f2f75d7fd9 wavenc: Raise rank of muxer to PRIMARY 2009-11-18 17:55:42 +01:00
Edward Hervey
8a1e0c53ae y4m: Raise rank of encoder to PRIMARY 2009-11-18 17:54:36 +01:00
Edward Hervey
a5dd867d6f law: Raise rank of encoders to PRIMARY 2009-11-18 17:54:35 +01:00
Bastien Nocera
efc611e420 Add user-id and user-pw properties 
So that one doesn't need to modify the URL to have access
to authenticated RTSP streams.

fixes #601728
 2009-11-18 17:27:19 +01:00
Mark Nauwelaerts
bf5f3a3964 qtdemux: fix bogus memory chunk size check 2009-11-18 12:54:48 +01:00
Wim Taymans
f52859432f jitterbuffer: release lock before emiting signals 
Release the jbuf lock before emiting the request-pt-map signal to avoid
deadlocks. We also need to catch the shutdown case when locking again.

Fixes #593354
 2009-11-18 10:50:44 +01:00
Wim Taymans
8c3b03de26 rtp: add BroadcomVoice depayloader 2009-11-18 10:50:43 +01:00
Wim Taymans
039d225a78 rtpbvpay: add rfc reference 2009-11-18 10:50:43 +01:00
Wim Taymans
02476fb5a3 rtp: add BroadcomVoice payloader 2009-11-18 10:50:43 +01:00
Jan Urbański
dd82612340 flvmux: properly finish the ECMA array 
The ECMA array with the file index was missing a mandatory end marker.
Fixes bug #601242.
 2009-11-18 08:03:43 +01:00
Jan Schmidt
baa79ffecb Use new still-frame API from gst-plugins-base 2009-11-18 03:09:06 +00:00
Michael Smith
fe9415544e qtdemux: identify IMA adpcm in qt properly. 2009-11-17 17:59:13 -08:00
Tim-Philipp Müller
4b1566d7f3 equalizer: printf format fix 2009-11-05 23:40:15 +00:00
Thiago Santos
feed8c2af3 avimux: do not write empty INFO list 
avoid writing an empty INFO list chunk, both because
it is useless and because vlc refuses to play the
resulting file.
 2009-11-05 12:31:56 -03:00
Sebastian Dröge
fb682d0444 equalizer: Notify about band property changes caused by changing number of bands 2009-11-05 10:54:12 +01:00
Sebastian Dröge
64e00f172c equalizer: Make changes to band properties and the number of bands threadsafe 2009-11-05 10:45:59 +01:00
Sebastian Dröge
025e26f73a equalizer: Fix stupid off by two bug 2009-11-05 10:30:46 +01:00
Sebastian Dröge
9405a328b1 equalizer: Add band property to select the band filter type 
This allows per band configuration of a peak, low shelf or
high shelf filter, which can be very useful if the band frequencies
and widths are manually configured.
 2009-11-05 08:21:33 +01:00
Sebastian Dröge
0525abd4af equalizer: Fix code style 2009-11-05 08:21:33 +01:00
Sebastian Dröge
e1acc8f4da equalizer: Some cleanup 2009-11-05 08:21:33 +01:00
Gabriel Millaire
773f142483 celtpay/depay : change GST_DEBUG_OBJECT to GST_LOG_OBJECT in pay_handle_buffer and depay_process 2009-11-04 12:02:50 -05:00
Gabriel Millaire
ac90398092 celtpay/depay: Negotiate parameters through caps 
celtdepay : added default framesize(480) channels(1) and clockrate(32000)
            depay_setcaps : now gets channels and framesize from string with default value
            depay_process : now adds timestamp to outbuf
            Added frame_size to GstRtpCeltDepay
            Changed some GST_DEBUG to GST_DEBUG_OBJECT or GST_LOG_OBJECT
celtpay : getcaps : gets channel and framesize and sets caps
          Added frame-size to static caps for audio/x-celt
 2009-11-04 12:02:50 -05:00
Jan Schmidt
1636bb0800 deinterlace: Pull in CFLAGS and LIBS flags from -base before core before system. 2009-11-04 15:59:49 +00:00
Edward Hervey
8df3e5c22b qtdemux: init variables to make compiler on osx build bot happy 2009-11-04 16:47:42 +01:00
Tim-Philipp Müller
261454dd92 qtdemux: init variables to make compiler on osx build bot happy 2009-11-03 16:05:47 +00:00
Tim-Philipp Müller
65a1db99eb deinterlace: remove pointless call to gst_element_no_more_pads() 2009-11-02 08:45:53 +00:00
Stefan Kost
03d2f4bdec level: fix decay to be smooth 
The length not having any fractional part as it was promoted to gdouble after
dividing two guint64.
 2009-11-01 00:31:48 +02:00
Stefan Kost
71044b37b6 level: calculate the message-intervall when it changes 2009-11-01 00:31:48 +02:00
Stefan Kost
f5b3392fa6 level: clocktime is a guint64, use right macro to init fields 2009-11-01 00:31:48 +02:00
Stefan Kost
519e424494 level: use more g-style types 2009-11-01 00:31:48 +02:00
Wim Taymans
0c12f585e3 avidemux: use segment_full when we can 
Use segment_full so that we can pass the applied rate to the segment values. We
will change the applied rate when we implement skip mode.
 2009-10-27 18:07:18 +01:00
Robert Swain
0cbe0d6e98 wavenc: Fix buffer offset by moving length incrementation 2009-10-27 12:43:33 +01:00
Michael Smith
b0b54d9324 Add dependencies of gstriff to things that link to gstriff, needed on Win32. 2009-10-23 18:09:43 -07:00
Stefan Kost
e43eb89449 tests: add a jitterbuffer test 
Tests pushing a few buffers in various order and asserting the order sent by the
jitterbuffer. Contains two disabled tests that need more work.
 2009-10-22 13:35:57 +03:00
Sebastian Dröge
68176befa2 matroskamux: Dirac "muxing" units end on EOS too 
A Dirac muxing unit are all non-picture, non-end-of-sequence
packets up to and including the first picture or eos packet.

See http://www.diracvideo.org/wiki/index.php/ContainerFormatMappingGuidelines
 2009-10-22 12:32:32 +02:00
Tim-Philipp Müller
457ac565ba avidemux: fix compilation with debugging disabled 
total_idx is always evaluated.
 2009-10-22 02:09:08 +01:00
Edward Hervey
683f2a02fb avidemux: Stop scanning at the last entry... and not the one before :) 
This ensures we actually push out everything
 2009-10-20 18:23:28 +02:00
Andy Wingo
c917d65e6d qtdemux: unpack more information into image/x-j2c caps 
* gst/qtdemux/qtdemux_fourcc.h: Add new fourccs for use by the mj2
  unpacker.
* gst/qtdemux/qtdemux.c (qtdemux_parse_trak): Unpack JPEG2000 component
  mapping and channel definitions from the jp2h header. Will add
  component-map and channel-definitions elements to the caps if the
  component maps or channel definitions are nonstandard, where standard
  order means RGB, 444 packed YUV, or greyscale, with no alpha channel.

Fixes #598915.
 2009-10-20 17:20:55 +02:00
Stefan Kost
217b54a8f6 level: code cleanup 
Use gdouble instead of double. Calculate falloff_time once instead of twice.
 2009-10-18 23:53:42 +03:00
Edward Hervey
024f1bae0c avidemux: MEMDUMP the junk blobs 
It will only actually pull the junk blobs from upstream if the memdump
level is activated
 2009-10-18 16:16:43 +02:00
Edward Hervey
1f5ace4de1 avidemux: Some avi files have INFO lists in the headers. 2009-10-18 16:16:43 +02:00
Edward Hervey
6e849f84fc avidemux: Don't seek on empty streams 2009-10-18 16:16:43 +02:00
Edward Hervey
a6ed612f42 avidemux: Ensure _calculate_durations_from_index only uses valid streams 2009-10-18 16:15:08 +02:00
Edward Hervey
1936d6ed26 avidemux: Only call convert function if we have strf.auds 2009-10-18 16:15:08 +02:00
Edward Hervey
af99a4a1de avidemux: Use first indexed stream for seeking. 
In the future, main_stream can be adjusted to contain the optimal stream
as mentionned in the FIXME line 3440
 2009-10-18 16:15:05 +02:00
Edward Hervey
2110cbe556 avidemux: Only expose streams that actually have something in it. 
This guarantees that in pull-mode, all streams have a valid index to
work with.
 2009-10-18 16:14:40 +02:00
Edward Hervey
546aa4c4dd avidemux: Properly mark presence of index. 
Instead of blindly saying we have an index, only do so if we have a
non-empty index.
 2009-10-18 15:40:37 +02:00
Mark Nauwelaerts
3d0659b813 debugutils: register pushfilesrc element 2009-10-16 18:19:20 +02:00
Mark Nauwelaerts
8f2beb5e51 avimux: support (some) VBR audio muxing 
AVI format can handle VBR audio provided audio chunks are of fixed duration
(cfr fixed duration video frames).  Apply this approach to (always) parsed
raw AAC and (if parsed) to MPEG-1/2 audio.

See #368681.
 2009-10-16 17:31:02 +02:00
Stefan Kost
6904e46ef2 build: use gst-glib-gen.mak to fix the glib build rules. 
The build rules in glib-gen.mak were using pattern rules in a non save way.
 2009-10-16 11:53:38 +03:00
Mark Nauwelaerts
7ceeb14834 avidemux: adjust flow return aggregation to updated loop_data 
In particular, each stream is now treated separately, and one stream's
EOS should not lead to overall EOS.
 2009-10-15 21:32:08 +02:00
Mark Nauwelaerts
354a062c89 qtdemux: check some more atom sizes prior to parsing 2009-10-15 17:06:41 +02:00
Wim Taymans
6725c91387 rtsp: handle events in TCP mode 
We need to handle events in TCP mode so that we can reply to the LATENCY event
with TRUE.
 2009-10-15 13:20:26 +02:00
Mark Nauwelaerts
f071ff6993 avidemux: add missing argument in debug message 2009-10-15 11:26:09 +02:00
Wim Taymans
88884cfddb rtspsrc: forward events into the rtpbin 
Only catch the SEEK event on the srcpad and let other events enter the rtpbin.
 2009-10-14 17:01:51 +02:00
Thiago Santos
959a3f9c95 matroskademux: Fix late tags finding 
Use the correct taglist variable when notifying of late tags.
 2009-10-14 11:33:24 -03:00
Mark Nauwelaerts
0141934eec avidemux: use GstIndex for (limited) seeking in push mode 
... but disable this for now.  Although it basically works fine,
user experience might be shaky (depending on taste), since there
is no keyframe info in push mode.
 2009-10-14 13:15:09 +02:00
Mark Nauwelaerts
35dc28d69a avidemux: add GstIndex support 2009-10-14 13:15:06 +02:00
Mark Nauwelaerts
92dd51e511 avidemux: also determine duration in push mode 2009-10-14 13:15:04 +02:00
Mark Nauwelaerts
e967767b27 qtdemux: add GstIndex support 2009-10-14 13:15:02 +02:00
Håvard Graff
58b9de4cca rtpptdemux: only forward the lost-event to the last seen pt-number 
forward all events on all pads except for the PacketLost event, which we want to
forward to the last seen pt pad.

Fixes #598377
 2009-10-14 12:28:55 +02:00
Wim Taymans
daa6d8f206 avidemux: demote some warnings to debug 2009-10-13 18:19:32 +02:00
Wim Taymans
9aa151a661 avi: add new avi flag we might want to use 2009-10-13 17:48:51 +02:00
Wim Taymans
df0335e65b avimux: calculate suggested buffer size 
Calculate the suggested buffer size based on the largest chunk in the file.

See #597847
 2009-10-13 17:48:51 +02:00
Wim Taymans
b134ca31fa avimux: add jpeg2000 to allowed caps 2009-10-13 17:48:51 +02:00
Wim Taymans
aea78a75ac avidemux: add debug for the superindex offsets 2009-10-13 17:48:50 +02:00