Thibault Saunier
8ca7640663
codecparsers: VC1: Fix after GstVC1ParserResult renaming
2011-10-17 13:17:38 +02:00
Gwenole Beauchesne
604ce193dd
codecparsers: vc1: use GstVC1ParserResult type name similarly to other parsers.
2011-10-17 13:17:37 +02:00
Gwenole Beauchesne
bd686a6370
codecparsers: vc1: handle End-of-Sequence correctly.
2011-10-17 13:17:37 +02:00
Gwenole Beauchesne
c90bf89b16
codecparsers: mpeg2: fix quant_matrix_extension() parser for chroma intra QM.
2011-10-17 13:17:37 +02:00
Sreerenj Balachandran
f8239ff692
h264parse: correct debug message and remove some dead code
...
See #661113 .
2011-10-17 11:17:50 +02:00
Sreerenj Balachandran
0a478db7dd
h264parse: correct parsing of "numberOfPictureParameterSets"
...
See #661113 .
2011-10-17 11:17:47 +02:00
Thiago Santos
61a7e6bf38
camerabin2: Check before acessing preview location list
...
Only access the preview location if it exists, to avoid acessing
a NULL variable. If the preview location list doesn't exist, it is
likely because the source has posted a preview message after camerabin2
has been put to READY.
2011-10-12 12:19:13 -03:00
Sjoerd Simons
94d9327e2a
shm: Add buffer-time property
...
Add a buffer-time property to limit the size of the amount of data
queued in the shmsink buffer in nanoseconds.
Fixes : #656107
2011-10-12 08:49:02 +01:00
Sjoerd Simons
52a7d015cd
shm: Add ability to add uint64 tags on buffers
2011-10-12 08:49:02 +01:00
Thiago Santos
acdd2c20f7
basecamerasrc: Set preview pipeline to ready when going to ready
...
The preview pipeline should go to ready when the camerasrc goes
to ready, as in ready elements shouldn't be processing data.
2011-10-11 23:30:49 -03:00
Thiago Santos
e90e041e52
camerabin2: Add a mutex to avoid concurrent access of preview filename lists
...
The preview filename list is acessed whenever a new capture is started, when
camera-source posts a new preview message or on state changes. All of those can
occur simultaneously, so add a mutex to prevent concurrent access.
2011-10-11 23:13:00 -03:00
Thiago Santos
17a00123a4
camerabin: Reset audiosrc timestamping
...
Reset audiosrc's timestamping data by setting
it to NULL to reset the ringbuffer and then re-seting
the clock that camerabin might not redistribute
2011-10-11 18:48:07 -03:00
Thiago Santos
0f99118141
camerabin: Prevent audio source from providing clock
...
camerabin's audio source might be put to NULL during its
use, so the clock would be lost. Better not allow it to
provide a clock at all.
2011-10-11 16:27:07 -03:00
Arun Raghavan
2c4bc6134c
examples: Fixes for compiling with GTK+ 3.0
...
camerabing example had a missing ')' and the fix to build against GTK+3
that was introduced in commit 516c977c76
is also applied to the camerabin2 example.
The scaletempo demo was using API which has been removed, so that's
wrapped in a version check.
2011-10-06 23:22:51 +05:30
Thibault Saunier
f94236078c
h264parse: Make proper use of the h264parser lib in parse_chain
...
Minor debugging logs fixes
2011-10-06 12:49:19 -03:00
Mark Nauwelaerts
9c221f492d
h264parse: properly interpret baseparse draining state
...
... which means the input data has reached the end, but need not exclude
many separate frames may still need parsing.
Fixes merging NALs into AU.
2011-10-06 12:26:23 +02:00
Sreerenj Balachandran
3129ea29b1
h264parse: correct the size argument of gst_h264_parser_identify_nalu_avc()
2011-10-06 11:59:41 +02:00
Sreerenj Balachandran
bbc30f3644
h264parse: minimum size of parsable avcC data should be 8
2011-10-06 11:59:38 +02:00
Sebastian Dröge
8e2c5833f1
videoparsers: Only fail to initialize the plugin if all parsers can't be registered
2011-10-04 12:31:05 +02:00
Thiago Santos
21653a793a
camerabin2: Initialize camerabin2 preview pipeline data with 0
...
Use g_new0 to initialize all fields with 0 to only cleanup what has been
initialized. This makes cleanup work correctly when some initialization
fails and pointers are left in some inconsistent state.
2011-10-03 16:16:23 -03:00
Sebastian Dröge
24241b809e
rtpvp8pay: Fix typo
2011-10-03 12:06:27 +02:00
Youness Alaoui
f5abb2c647
rtpvp8: Update the pay/depay to the ietf-draft-01 spec
2011-10-03 11:32:46 +02:00
Vincent Penquerc'h
9f9d52c6cb
opusdec: fix decoding
...
A simple ... opusenc ! opusdec ... pipeline now works.
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:21:37 +02:00
Vincent Penquerc'h
532e90a34d
opusenc: moan if we get an unexpected amount of data
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:21:24 +02:00
Vincent Penquerc'h
934144c352
opus: properly setup caps and init state from caps
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:21:15 +02:00
Vincent Penquerc'h
85de20b8a1
opusenc: use the same frame size setup as the opus test code
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:21:02 +02:00
Vincent Penquerc'h
8caa7adb5e
opusdec: opus supports a select set of sampling rates
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:20:52 +02:00
Vincent Penquerc'h
ae510870e9
opus: make it build against current, and remove cruft
...
https://bugzilla.gnome.org/show_bug.cgi?id=660364
2011-10-03 11:20:46 +02:00
Vincent Penquerc'h
e4856a2965
mpegtsdemux: fix scanning stopping too early
...
https://bugzilla.gnome.org/show_bug.cgi?id=648245
2011-10-03 11:15:16 +02:00
Vincent Penquerc'h
fa3d661083
kate: avoid rendering when we know there is nothing to render
...
https://bugzilla.gnome.org/show_bug.cgi?id=660528
2011-10-03 10:38:43 +02:00
Vincent Penquerc'h
12bb47343d
kate: fix race condition on PAUSED->READY state change
...
https://bugzilla.gnome.org/show_bug.cgi?id=660630
2011-10-03 10:36:35 +02:00
Vincent Penquerc'h
46dd7941f3
mpegpsdemux: take into account SCR offset when seeking
...
Since the seeking byte offset is chosen by linear interpolation
from SCR values, we need to take that first SCR into account
to end up near the correct offset. Otherwise, as the code does
a linear search after that first seek, it will take a LOOOOOONG
time to get there for streams which don't start at zero.
https://bugzilla.gnome.org/show_bug.cgi?id=659485
2011-09-30 15:15:06 +01:00
Vincent Penquerc'h
49d1121101
mpegdemux: answer position query with a stream time position
...
https://bugzilla.gnome.org/show_bug.cgi?id=659485
2011-09-30 15:11:12 +01:00
Vincent Penquerc'h
71f28c44a0
mpegpsdemux: remove unused field
...
https://bugzilla.gnome.org/show_bug.cgi?id=659485
2011-09-30 15:05:31 +01:00
Thiago Santos
009c440f44
tests: camerabin2: Refactor tests a little
...
Refactor camerabin2 tests a little
2011-09-29 18:21:06 -03:00
Thiago Santos
f6c0e2cd26
tests: camerabin2: adding tests to check for preview message filenames
...
Preview messages now have filenames, add tests to check that they are
correct
2011-09-29 18:21:06 -03:00
Thiago Santos
379670e036
camerabin2: add location to preview image messages
...
Makes camerabin2 intercept preview-image messages and add
the filename corresponding to the message structure in the
'location' field.
Makes easier for applications to track preview images
2011-09-29 18:21:06 -03:00
Thiago Santos
b03c7478d4
camerabin2: removing capsfilter from preview pipeline
...
appsink already has a caps property, so we don't need the
capsfilter here
2011-09-29 11:50:04 -03:00
Robert Swain
6446cc4ae9
camerabin2: Fix potential loss of EOS event
...
Setting the audio source to NULL just after pushing the EOS event
on it could potentially cause loss of said EOS event. Instead, we
can set the audio source to NULL when ready-for-capture is
signalled and the boolean value is true as this indicates we are
not currently capturing video.
2011-09-29 16:22:00 +02:00
Robert Swain
f4e744ff49
camerabin2: Stop the audio source between captures
...
Move the audio source setting of state to NULL to _stop_capture () to
avoid the audio source running between captures.
2011-09-26 17:23:41 +02:00
Sebastian Dröge
fc2434fd97
faac: Also set maximum number of samples that the subclass wants
2011-09-26 16:26:31 +02:00
Sebastian Dröge
874da87b25
faac: Simple fix for GstAudioEncoder API change
2011-09-26 16:05:40 +02:00
Thibault Saunier
705a80d957
codecparser: VC1: Implement a VC1 parsing library
2011-09-26 08:46:37 -03:00
Thibault Saunier
2c928aba19
codecparsers: Declare the new APIs as unstable for the time being
2011-09-26 08:11:45 -03:00
Vincent Penquerc'h
38cdb54112
mpegtsdemux: keep CRC table in .rodata
...
https://bugzilla.gnome.org/show_bug.cgi?id=660118
2011-09-26 13:00:03 +02:00
Mark Nauwelaerts
e615cf15a9
irtspparse: add Interleaved RTSP parser element
2011-09-26 12:20:35 +02:00
Tim-Philipp Müller
e37634e9f9
faad: fix compiler warning
...
gstfaad.c: In function 'gst_faad_parse':
gstfaad.c:615:11: error: 'len' may be used uninitialized in this function
2011-09-23 10:10:37 +01:00
Tim-Philipp Müller
c9f7e9b26d
faad: parse wants a GstFlowReturn return value, not a gboolean
2011-09-23 09:57:01 +01:00
Tim-Philipp Müller
ad1883f54d
psmux: fix writing of system header, which makes VLC not skip the adjacent PSM and play embedded H.264 streams
...
header_length contains the length in bytes after the header_length
field, excluding the 6 byte start code and header_length field.
H.264 streams and some other formats need to be announced in the PSM.
VLC wouldn't play files created with mpegpsmux containing H.264 because
we claim the system header is larger than it actually is, which makes
VLC skip the program stream map which follows the system header, which
in turn makes it not recognise our H.264 video stream.
2011-09-22 20:11:21 +01:00
Tim-Philipp Müller
76dccf91fd
docs: add ignore rules for libs docs directory
2011-09-22 20:09:32 +01:00