Refactor the filter setup. Add two new filters with shelf characteristics for
first and last band. Change gain calculation as recommended in the quoted
document (no qrt needed). Rename variables to match the formulas in the
document.
No need to maintain our own genre table in qtdemux. The genres are
identical to the ID3 genres, so we can just use libgsttag's
gst_tag_id3_genre_get() to look them up.
The performance category is meant to be used to audit codepaths that lead to bad
performance (e.g. copies, conversion that can be avoided).
Remove the event category which is not used.
For vbr audio streams we need to use the number of blocks to calculate the
timestamps.
When the allocation of additional index memory fails, don't throw away what
we had before.
Various cleanups.
Implement scanning of the file when we can parse the index.
Some refactoring of common code.
Cleanups and comments.
Remove some reimplemented code.
Remove index massage code and put a FIXME where we should do something
equivalent later.
Remove some duplicate counters.
Be smarter when updateing the current the timestamp and offset in the stream
because we can reuse previously calculated values when simply go forward one
step.
Correctly set metadata on outgoing buffers.
Add a new function and datastructure to parse and hold the index entries on a
per stream base. Also avoid doing too much work trying to figure out the
timestamps and durations as we can trivially do that later.
Less information in the entries makes them 2 times smaller and not doing too
much work makes this code about 12 times faster than the regular case.
Hook in the new function alongside the existing function for comparison until
the rest of the code is updated to handle the new index datastructure.
For calculating the durations of each sample, we are supposed to add each
duration modulo 1<<32 so make the elapsed time counter a uint32.
Fixes#595942
If it looks like we would be allocating a silly size for our sample
index, just bail out instead of trying to allocate it. Helps with
broken or fuzzed files where we might end up trying to malloc a
couple of hundred MBs otherwise.
Make sure we don't read beyond the atom boundary. Note that the code
behaves slightly differently in the corner case where there is not
enough atom data for the specified number of samples (n_samples_time)
in the atom, but still enough data to fill the pre-allocated index of
n_samples entries: before we would just stop parsing the stts data
and continue, whereas now we will likely error out. This should not
be a problem in practice though. We could maintain the old behaviour
by doing reads with a size check inside the loop if needed.
Use GstByteReader to parse stsz and stsc chunks, and check size of
available data before parsing it, instead of blindly assuming there
will be enough data. Fixes crashes with some fuzzed/broken files.
At the end, Dirac streams have an EOS packet with 0 length.
Don't ever sit in an infinite loop when processing one. Allows
muxing Dirac into mkv to complete successfully.
Add a property to allow control over what event causes a file
to finish being written and a new file start. The default is
the same as before -- each buffer causes a new file to be
written. Added is a case where buffers are written to the
same file until a discontinuity in the stream.
Add a parameter 'ignore-pt' that disables creating a gstrtpptdemux module and
ghosts the pads of gstrtpjitterbuffer instead of the ones of gstrtpptdemux.
Fixes#594490
When we receive a reordered packet with the same timestamp as the previous one
(which can happen for fragmented packets) don't consider the packet as lost but
instead wait for the reordered packet to arrive.
Switch the warning-level, so that a reordering does not get a warning, only
an actual produced lost-packet.
Fixes#594251
In gst_rtspsrc_parse_digest_challenge(), rtspsrc does a g_strndup of the auth
header items and then passes them to gst_rtsp_connection_set_auth_param()
without freeing.
Fixes#594133
When receiving a sync-packet, all sessions with the same cname will be compared
and synced together. In this process, there could still be references to a
session that has been shut down in the meanwhile.
This patch makes sure that these references are removed when shutting down a
session, so that the syncing can be done safely.
Fixes#594283
The priv->clock_rate variable could become -1 between when its checked to not
be -1 and when its used, causing an assertion. Fixed by taking the mutex
earlier in the chain() function.
Fixes#593955
This reintroduces the fix for bug #593391. It also applies it in
gst_rtp_session_sync_rtcp() which has very similar code to
gst_rtp_session_send_rtcp().
When we construct a timestamp that would result in a timestamp that is earlier
than when the packet was received, reset the skew calculation as this is
probably a sign that the sender restarted or paused.
Fixes#593354
Recent changes in gst-plugins-good/gst/effectv prevents it from being compiled
with gcc 3. The problem is that the new code uses preprocessor conditionals
within a macro call which does not work with older versions of gcc.
Fixes bug #593688.
In case of non-interleaved (= sequentially payloaded) streams,
the AU-Index serves little purpose (that is not already covered by
RTP fields). (Broken) Payloaders might consider this field then
to be disregarded and have non spec compliant values, e.g. each
RTP packet having AU-Index 2 (rather than 0). As such, ensure/force
simple sequential sending of non-interleaved streams.
3GPP specs define a number of tags along with precise layout. While these
are normally expected to be found in a container whose major brand is a
3GPP brand, this may also happen when a 3GPP brand is only mentioned as a
compatible brand. Apply some checks, heuristic and fallbacks to extract
such tags as well.
Handle large, invalid or otherwise unusual chunk sizes.
Verify some chunk sizes to be at least the size they are
expected to be and round up some sizes to even number for
e.g. offset administration, which must also be properly
tracked in push mode.
After a BYE packet from a source, stop forwarding the SR packets for lip-sync
to rtpbin. Some senders don't update their SR packets correctly after sending a
BYE and then we break lip-sync. We prefer to let the jitterbuffers drain with
the current lip-sync instead.
Connect to the pad-removed signal of the ptdemux elements so that we remove the
ghostpads for them. Fixes cleanup when going to NULL as well as when releasing
the sinkpads.
Fixes#561752
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
Free the session when all the request pads are released.
Don't mess with the session list in free_session as it is called from a foreach
on that list.
Set the state of the upstream element to NULL first.
See #561752
We usually only get SR packets in our chain function but if an invalid packet
contains the SR packet after the RR packet, we must not fail but simply ignore
the malformed packet.
Fixes#581375
Since neither rtpmanager nor any of the payloaders properly implement
pad allocation, there is no way for the rtpmanager to inform downstream elements
of the new SSRC if there is an SSRC collision. So the warning is emitted all the
time and it is confusing.
Fixes#580144
No short-desc as we have them in the element details.
Also keep things (Makefile.am and sections.txt) sorted.
Reword ambigous returns. No text after since please.
When the number of participants is less than 50, the RFC allows for sending the
BYE packet immediatly instead of using the regular BYE timeout.
Fixes#567828.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_setcaps_send_rtp), (create_send_rtp_sink):
* gst/rtpmanager/rtpsession.c: (rtp_session_set_internal_ssrc):
When an SSRC is found on the caps of the sender RTP, use this as the
internal SSRC. Fixes#565910.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_getcaps_send_rtp):
* gst/rtpmanager/rtpsession.c: (check_collision),
(rtp_session_schedule_bye_locked), (rtp_session_schedule_bye):
* gst/rtpmanager/rtpsession.h:
Rename a method to better reflect what it really does.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_getcaps_send_rtp):
Use method to get the internal SSRC.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_set_property), (rtp_session_get_property):
Add property to congiure the internal SSRC of the session.
Fixes#565910.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_set_internal_ssrc):
Only change the SSRC of the session and reset the internal source when
the SSRC actually changed. See #565910.
Original commit message from CVS:
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (get_clock_rate):
* gst/rtpmanager/rtpsource.h:
When no payload was specified on the caps but there was a clock-rate,
assume the clock-rate corresponds to the first payload type found in the
RTP packets. Fixes#565509.
Original commit message from CVS:
Patch by: Arnout Vandecappelle <arnout at mind dot be>
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of the last outgoing timestamp and of the last sender-side
time. Timestamps can only go forward if they do at the sender
side, can only go back if they do at the sender side, and remain the
same if they remain the same at the sender side. Fixes#565319.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (obtain_source),
(rtp_session_create_source), (rtp_session_process_rtp),
(rtp_session_process_sr), (rtp_session_process_rr),
(rtp_session_process_sdes), (rtp_session_process_bye):
Make obtain_source return an aditional ref so that we don't lose our ref
to it when a session cleanup occurs when we are emiting a signal.
Emit the on_new_ssrc signal for the CSRC, not the SSRC.
Fixes#562319.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_reset_sync),
(gst_rtp_bin_clear_pt_map):
Reset the sync parameters when clearing the payload type map too.
Fixes#562312.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (get_client),
(gst_rtp_bin_reset_sync), (gst_rtp_bin_associate),
(gst_rtp_bin_handle_sync), (create_stream),
(gst_rtp_bin_class_init), (new_ssrc_pad_found):
* gst/rtpmanager/gstrtpbin.h:
Remove a lot of per stream state that is not needed and pass new info in
the method call.
Add signal to reset sync parameters.
Avoid parsing the caps to get a clock_base, we get this from the sync
signal now.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_set_property),
(rtp_session_get_property):
Add property to configure the RTCP MTU.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(copy_source), (rtp_session_create_sources),
(rtp_session_get_property):
Add G_PARAM_STATIC_STRINGS.
Add property to return a GValueArray of all known RTPSources in the
session.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_create_sdes), (rtp_source_set_property),
(rtp_source_get_property):
Remove properties to set the various SDES items, an application is never
supposed to change the RTPSource data.
Change the SDES getter properties to one SDES property that returns all
SDES items in a GstStructure.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_release_pad):
Release the right pads on rtpbin. Fixes#561752.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (get_current_times),
(rtcp_thread), (gst_rtp_session_chain_recv_rtp):
Pass the running time to the session when processing RTP packets.
Improve the time function to provide more info.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (update_arrival_stats),
(rtp_session_process_rtp), (rtp_session_process_sdes),
(rtp_session_process_rtcp), (session_start_rtcp),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Mark the internal source with a flag.
Use running_time instead of the more useless timestamp.
Validate a source when a valid SDES has been received.
Pass the current system time when processing SR packets.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_init), (rtp_source_create_stats),
(rtp_source_get_property), (rtp_source_send_rtp),
(rtp_source_process_rb), (rtp_source_get_new_rb),
(rtp_source_get_last_rb):
* gst/rtpmanager/rtpsource.h:
Add property to get source stats.
Mark params as STATIC_STRINGS.
Calculate the bitrate at the sender SSRC.
Avoid negative values in the round trip time calculations.
* gst/rtpmanager/rtpstats.h:
Update some docs and change some variable name to more closely reflect
what it contains.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain_rtcp):
Initialize return value to fix compiler warning about uninitialized
variable.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_handle_sync), (create_stream), (free_stream),
(new_ssrc_pad_found):
Remove internal sync pad, use signals instead to get lip-sync
notifications.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_base_init),
(gst_rtp_jitter_buffer_class_init),
(gst_rtp_jitter_buffer_internal_links), (create_rtcp_sink),
(remove_rtcp_sink), (gst_rtp_jitter_buffer_request_new_pad),
(gst_rtp_jitter_buffer_release_pad),
(gst_rtp_jitter_buffer_sink_rtcp_event),
(gst_rtp_jitter_buffer_chain_rtcp),
(gst_rtp_jitter_buffer_get_property):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Make it possible to send SR packets to the jitterbuffer.
Check if the SR timestamps are valid by comparing them to the RTP
timestamps.
Signal the SR packet and the timing information to listeners.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_rtcp_chain), (gst_rtp_ssrc_demux_src_query):
Remove some unused code.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of the last seen RTP timestamp so that we can filter out
invalid SR packets.
Original commit message from CVS:
* gst/rtpmanager/rtpsource.c: (get_clock_rate):
Fix GST_DEBUG call to only have as many arguments as required
by the format string. Fixes a compiler warning.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (create_stream), (new_ssrc_pad_found):
Do not try to keep track of the clock-rate ourselves but simply get the
value from the jitterbuffer.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_get_sync):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add some debug info.
Pass the clock-rate to the jitterbuffer.
Also pass the clock-rate along with the rtp timestamp when getting the
sync parameters.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_chain):
Fix some debug.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of clock-rate changes and return the clock-rate together with
the rtp timestamps used for sync.
Don't try to construct timestamps when we have no base_time.
* gst/rtpmanager/rtpsource.c: (get_clock_rate):
Request a new clock-rate when the payload type changes.
Reset the jitter calculation when the clock-rate changes.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps),
(gst_rtp_jitter_buffer_flush_stop), (gst_rtp_jitter_buffer_chain):
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew):
Small cleanups and some more debug info.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain):
Also configure the next expected output seqnum when we get a seqnum-base
on the caps.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps),
(gst_rtp_jitter_buffer_flush_start),
(gst_rtp_jitter_buffer_flush_stop), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Fix problem with using the output seqnum counter to check for input
seqnum discontinuities.
Improve gap detection and recovery, reset and flush the jitterbuffer on
seqnum restart. Fixes#556520.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_insert):
Fix wrong G_LIKELY.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_event_send_rtcp_src), (create_send_rtcp_src):
Install event handler on the rtcp_src pad, make LATENCY event return
TRUE.
Original commit message from CVS:
Patch by: Håvard Graff <havard dot graff at tandberg dot com>
* gst/rtpmanager/gstrtpbin-marshal.list:
Add marshaller for new action signal.
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_get_internal_session),
(gst_rtp_bin_class_init):
* gst/rtpmanager/gstrtpbin.h:
Add action signal to retrieve the internal RTPSession object.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_get_property), (gst_rtp_session_release_pad):
Add property to access the internal RTPSession object.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(check_collision):
* gst/rtpmanager/rtpsession.h:
Add action signal to retrieve an RTPSource object by SSRC.
See #555396.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps):
Only update the seqnum-base when it was not already configured for the
streams.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (on_new_ssrc), (on_ssrc_collision),
(on_ssrc_validated), (on_ssrc_active), (on_ssrc_sdes),
(on_bye_ssrc), (on_bye_timeout), (on_timeout), (on_sender_timeout):
Ref the rtpsource object before we release the session lock when we emit
the signals.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session),
(gst_rtp_bin_associate), (gst_rtp_bin_sync_chain):
Do not try to adjust the offset of streams for which we have not yet
seen an SR packet. Avoids large ts-offsets in some cases.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (on_sender_timeout),
(create_session), (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (gst_rtp_bin_class_init),
(gst_rtp_bin_request_new_pad):
* gst/rtpmanager/gstrtpbin.h:
Add signal to notify listeners when a sender becomes a receiver.
Tweak lip-sync code, don't store our own copy of the ts-offset of the
jitterbuffer, don't adjust sync if the change is less than 4msec.
Get the RTP timestamp <-> GStreamer timestamp relation directly from
the jitterbuffer instead of our inaccurate version from the source.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_get_sync):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add G_LIKELY macros, use global defines for max packet reorder and
dropouts.
Reset the jitterbuffer clock skew detection when packets seqnums are
changed unexpectedly.
* gst/rtpmanager/gstrtpsession.c: (on_sender_timeout),
(gst_rtp_session_class_init), (gst_rtp_session_init):
* gst/rtpmanager/gstrtpsession.h:
Add sender timeout signal.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_insert),
(rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Add some G_LIKELY macros.
Keep track of the extended RTP timestamp so that we can report the RTP
timestamp <-> GStreamer timestamp relation for lip-sync.
Remove server timestamp gap detection code, the server can sometimes
make a huge gap in timestamps (talk spurts,...) see #549774.
Detect timetamp weirdness instead by observing the sender/receiver
timestamp relation and resync if it changes more than 1 second.
Add method to report about the current rtp <-> gst timestamp relation
which is needed for lip-sync.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(on_sender_timeout), (check_collision), (rtp_session_process_sr),
(session_cleanup):
* gst/rtpmanager/rtpsession.h:
Add sender timeout signal.
Remove inaccurate rtp <-> gst timestamp relation code, the
jitterbuffer can now do an accurate reporting about this.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (calculate_jitter),
(rtp_source_process_rtp):
* gst/rtpmanager/rtpsource.h:
Remove inaccurate rtp <-> gst timestamp relation code.
* gst/rtpmanager/rtpstats.h:
Define global max-reorder and max-dropout constants for use in various
subsystems.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_send_rtcp),
(gst_rtp_session_event_send_rtp_sink):
Send EOS when the session object instructs us to.
* gst/rtpmanager/rtpsession.c: (rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Make it possible for the session manager to instruct us to send EOS. We
currently will EOS when the session is a sender and when the sender part
goes EOS. This is not entirely correct behaviour because the session
could still participate as a receiver.
Fixes#549409.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (new_ssrc_pad_found):
Reset rtp timestamp interpollation when we detect a gap when the
clock_base changed.
Don't try to adjust the ts-offset when it's too big (> 3seconds)
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_set_ssrc):
* gst/rtpmanager/gstrtpsession.h:
Add method to set session SSRC.
* gst/rtpmanager/rtpsession.c: (check_collision),
(rtp_session_set_internal_ssrc), (rtp_session_get_internal_ssrc),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Added debugging for the collision checks.
Add method to change the internal SSRC of the session.
* gst/rtpmanager/rtpsource.c: (rtp_source_process_rtp):
Reset the clock base when we detect large jumps in the seqnums.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c:
Print the pad-name in debug log.
* sys/dshowsrcwrapper/gstdshowaudiosrc.c:
* sys/dshowsrcwrapper/gstdshowvideosrc.c:
Use "-" instead of "_" in property names. Can we call them just
"device" like everywhere else?
Original commit message from CVS:
Based on patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Make the buffer metadata writable before inserting it in the
jitterbuffer because the jitterbuffer will modify the timestamps.
* gst/rtpmanager/rtpjitterbuffer.c:
Update method comment about requiring writable metadata on buffers.
* gst/rtpmanager/rtpsession.c: (rtp_session_process_sr),
(rtp_session_process_rtcp):
Make the RTCP buffer metadata writable because we want to modify the
metadata.
Fixes#546312.
Original commit message from CVS:
Patch by: Håvard Graff <havard dot graff at tandberg dot com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Fix debug by logging the right seqnum.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpbin.c: (get_pt_map):
Release lock before emitting the request-pt-map signal.
Fixes#543480.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_send_rtp), (gst_rtp_session_send_rtcp),
(gst_rtp_session_sync_rtcp), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_chain_recv_rtcp), (gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsession.c: (source_push_rtp),
(rtp_session_send_rtp):
* gst/rtpmanager/rtpsource.c: (push_packet), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_send_rtp):
Changed some GST_DEBUG() to GST_LOG() to reduce the spam when a
pipeline is running normally.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_init),
(gst_rtp_session_finalize), (rtcp_thread),
(gst_rtp_session_chain_recv_rtp), (gst_rtp_session_chain_recv_rtcp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsession.c: (check_collision),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_rtcp), (rtp_session_send_rtp),
(rtp_session_send_bye_locked), (rtp_session_send_bye),
(rtp_session_next_timeout), (session_report_blocks), (session_cleanup),
(is_rtcp_time), (rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Do not mix the use of g_get_current_time() with gst_clock_get_time().
Original commit message from CVS:
* ext/dc1394/gstdc1394.c:
* ext/ivorbis/vorbisdec.c:
* ext/jack/gstjackaudiosink.c:
* ext/metadata/gstmetadatademux.c:
* ext/mythtv/gstmythtvsrc.c:
* ext/theora/theoradec.c:
* gst-libs/gst/app/gstappsink.c:
* gst/bayer/gstbayer2rgb.c:
* gst/deinterlace/gstdeinterlace.c:
* gst/rawparse/gstaudioparse.c:
* gst/rawparse/gstvideoparse.c:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/selector/gstinputselector.c:
* gst/selector/gstoutputselector.c:
* gst/videosignal/gstvideoanalyse.c:
* gst/videosignal/gstvideodetect.c:
* gst/videosignal/gstvideomark.c:
* sys/oss4/oss4-mixer.c:
* sys/oss4/oss4-sink.c:
* sys/oss4/oss4-source.c:
Do not use short_description in section docs for elements. We extract
them from element details and there will be warnings if they differ.
Also fixing up the ChangeLog order.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_init),
(gst_rtp_bin_finalize), (gst_rtp_bin_change_state):
Fix deadlock when shutting down, use a new lock instead to properly
shutdown.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c:
(gst_rtp_bin_propagate_property_to_jitterbuffer),
(gst_rtp_bin_change_state), (new_payload_found),
(new_ssrc_pad_found):
Break out of callbacks when we are shutting down.
Make sure no state changes can happen when we reconfigure.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
When checking the seqnum, reset the jitterbuffer if the gap is too big,
we need to do this so that we can better handle a restarted source.
Fix some comments.
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew),
(rtp_jitter_buffer_insert):
Tweak the skew resync diff.
Use our working seqnum compare function in -base.
Rework the jitterbuffer insert code to make it clearer and more
performant by only retrieving the seqnum of the input buffer once and by
adding some G_LIKELY compiler hints.
Improve debugging for duplicate packets.
* gst/rtpmanager/rtpsource.c: (rtp_source_process_rtp):
Fix a comment, we don't do skew correction here..
Original commit message from CVS:
Patch by: Håvard Graff <havard dot graff at tandberg dot com>
* gst/rtpmanager/gstrtpbin.c:
(gst_rtp_bin_propagate_property_to_jitterbuffer),
(gst_rtp_bin_set_property):
Propagate the do-lost and latency properties to the jitterbuffers when
they are changed on rtpbin.
Original commit message from CVS:
* docs/Makefile.am:
Don't attempt to build plugin docs when they're disabled.
* gst/bayer/Makefile.am:
Add libgstvideo to the link.
* gst/rtpmanager/Makefile.am:
Fix link order, and move LIBS things to _LIBS
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Simply drop bad RTP packets with a warning instead of just posting an
error and stopping. This is a perfectly recoverable event and we don't
force people to use an rtpbin to filter out bad packets first.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Avoid waiting for a negative (huge) duration when the last packet has a
lower timestamp than the current packet.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_query_send_rtcp_src):
Make sure to unref the rtpsession returned by gst_pad_get_parent() to
prevent a memory leak.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Initialise with GST_CLOCK_TIME_NONE to avoid compiler warning.
Original commit message from CVS:
* gst/rtpmanager/rtpsource.c: (rtp_source_finalize):
Make sure to unref the caps used by RTPSource to prevent a memory leak.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/rtpsession.c: (source_clock_rate),
(rtp_session_process_bye), (rtp_session_send_bye_locked):
Unlock the session lock when calling one of our callbacks.
Fixes#532011.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_stream), (gst_rtp_bin_init),
(gst_rtp_bin_set_property), (gst_rtp_bin_get_property):
* gst/rtpmanager/gstrtpbin.h:
Expose new jitterbuffer property in rtpbin too.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init), (gst_rtp_jitter_buffer_init),
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Disable sending out rtp packet lost events by default and make a
property to enabe it. We will likely enable it by default when the base
depayloaders have a default handler for them so that we don't send these
events all through the pipeline for now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_init), (gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_src_event), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Remove private version of a function that is in -base now.
Add src event handler.
Rework the jitterbuffer pushing loop so that it can quickly react to
lost packets and instruct the depayloader of them. This can then be used
to implement error concealment data.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_query_send_rtcp_src), (create_recv_rtcp_sink),
(create_send_rtcp_src):
Set up some internal links functions for the RTCP and sync pads because
the defaults are really not correct.
Implement a query handler for the RTCP src pad, mostly to correctly
report about the latency.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain):
* gst/rtpmanager/rtpsession.c: (update_arrival_stats),
(rtp_session_process_sr), (rtp_session_on_timeout):
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter):
* gst/rtpmanager/rtpsource.h:
* gst/rtpmanager/rtpstats.h:
Also keep track of the first buffer timestamp together with the first
RTP timestamp as they both are needed to construct the timing of
outgoing packets in the jitterbuffer and are therefore also needed to
manage lip-sync. This fixes lip-sync if the first RTP packets arrive
with a wildly different gap.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (free_session):
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_finalize):
Avoid leaking pads in the RTP manager.
Original commit message from CVS:
Based on patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_init),
(rtcp_thread), (start_rtcp_thread), (stop_rtcp_thread),
(join_rtcp_thread), (gst_rtp_session_change_state):
Avoid a deadlock when joining the RTCP thread in PAUSED because it might
be blocked downstream. Also avoid spawning multiple rtcp threads.
Fixes#520894.
Original commit message from CVS:
Patch by: Stefan Kost <ensonic@users.sf.net>
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew):
Don't try to reset the clock skew when we have no timestamps.
Fixes#519005.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate):
Ignore streams that did not receive an SR packet when doing
synchronisation. Fixes#516160.
Original commit message from CVS:
Patch by: Thijs Vermeir <thijsvermeir at gmail dot com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Try to get the new clock-rate from the buffer caps when we receive a new
payload type instead of always firing the signal. Fixes#512774.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(create_stream), (payload_type_change), (new_ssrc_pad_found):
Also handle lip-sync when the clock-rate is not provided with caps but
with a signal.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain):
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew),
(rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Remove the fixed clock-rate from the jitterbuffer and extend it so that
a clock-rate can be provided with each buffer instead. Fixes#511686.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_init), (gst_rtp_jitter_buffer_change_state),
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Remove old unused variable.
Track pt on input buffers and get the clock-rate when it changes.
Ignore packets with unknown clock-rate. See #511686.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/rtpsource.c: Fix unref of buffer using the
wrong function. Fixes#511920
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
If we find the caps in the cache, use it to parse the clock-rate instead
of returning an error. Fixes a TODO as found by Youness Alaoui.
Original commit message from CVS:
Patch by: Youness Alaoui <youness dot alaoui at collabora dot co dot uk>
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
* gst/rtpmanager/rtpsession.c: (rtp_session_set_callbacks),
(rtp_session_set_process_rtp_callback),
(rtp_session_set_send_rtp_callback),
(rtp_session_set_send_rtcp_callback),
(rtp_session_set_sync_rtcp_callback),
(rtp_session_set_clock_rate_callback),
(rtp_session_set_reconsider_callback), (source_push_rtp),
(source_clock_rate), (rtp_session_process_bye),
(rtp_session_process_rtcp), (rtp_session_send_bye),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Make it possible to use different user_data for each of the callbacks.
Fixes#508587.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (create_send_rtp_sink):
Don't set fixed caps, we can basically do everything the upsteam peer
pad can renegotiate to. Fixes#507940.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Don't unref the popped buffer when we don't have ownership.
Fixes#507020.
Original commit message from CVS:
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_finalize),
(gst_rtp_pt_demux_setup), (gst_rtp_pt_demux_release),
(gst_rtp_pt_demux_change_state):
* gst/rtpmanager/gstrtpssrcdemux.c: (gst_rtp_ssrc_demux_reset),
(gst_rtp_ssrc_demux_dispose), (gst_rtp_ssrc_demux_src_query),
(gst_rtp_ssrc_demux_change_state):
Clean up the dynamic pads when going to READY.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_class_init),
(gst_rtp_bin_handle_message):
* gst/rtpmanager/gstrtpsession.c: (source_get_sdes_structure),
(on_ssrc_sdes):
Post a message when the SDES infor changes for a source.
* gst/rtpmanager/rtpsession.c:
* gst/rtpmanager/rtpsource.c:
Update some comments.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session):
* gst/rtpmanager/rtpjitterbuffer.c:
Update comment.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_set_property), (gst_rtp_session_get_property):
Define some GObject properties to set SDES and other configuration.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_finalize),
(rtp_session_set_property), (rtp_session_get_property),
(on_ssrc_sdes), (rtp_session_set_bandwidth),
(rtp_session_get_bandwidth), (rtp_session_set_rtcp_fraction),
(rtp_session_get_rtcp_fraction), (rtp_session_set_sdes_string),
(rtp_session_get_sdes_string), (obtain_source),
(rtp_session_get_internal_source), (rtp_session_process_sdes),
(rtp_session_send_rtp), (rtp_session_next_timeout), (session_sdes),
(is_rtcp_time):
* gst/rtpmanager/rtpsession.h:
Add signal when new SDES infor has been found for a source.
Create properties for SDES and other info.
Simplify the SDES API.
Add method for getting the internal source object of the session.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_finalize), (rtp_source_set_property),
(rtp_source_get_property), (rtp_source_set_callbacks),
(rtp_source_get_ssrc), (rtp_source_set_as_csrc),
(rtp_source_is_as_csrc), (rtp_source_is_active),
(rtp_source_is_validated), (rtp_source_is_sender),
(rtp_source_received_bye), (rtp_source_get_bye_reason),
(rtp_source_set_sdes), (rtp_source_set_sdes_string),
(rtp_source_get_sdes), (rtp_source_get_sdes_string),
(rtp_source_get_new_sr), (rtp_source_get_new_rb):
* gst/rtpmanager/rtpsource.h:
Add GObject properties for various things.
Don't leak the bye reason.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_query):
jitterbuffer can buffer an unlimited amount of time and thus has no
max_latency requirements.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtpmanager/gstrtpsession.c:
Fix bad function signatures (#492798).
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_next_timeout),
When reconsidering RTCP timeouts, set the next timeout against the last
report time instead of the current clock time so that we don't end up
reconsidering forever.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Only peek at the tail element instead of popping it off, which allows
us to greatly simplify things when the tail element changes.
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_event_recv_rtp_sink):
* gst/rtpmanager/gstrtpssrcdemux.c:
(gst_rtp_ssrc_demux_sink_event):
Forward FLUSH events instead of leaking them.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Remove the tail-changed callback in favour of a simple boolean when we
insert a buffer in the queue.
Add method to peek the tail of the buffer.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_flush_start),
(gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_change_state), (apply_offset),
(gst_rtp_jitter_buffer_loop):
Remove some old unused variables.
Don't add the latency to the skew corrected timestamp, latency is only
used to sync against the clock.
Improve debugging.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(rtp_jitter_buffer_reset_skew), (calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Handle case where server timestamp goes backwards or wildly jumps by
temporarily pausing the skew correction.
Improve debugging.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (free_client):
Fix crasher in dispose.
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew):
Handle cases where input buffers have no timestamps so that no clock
skew can be calculated, in this case interpollate timestamps based on
rtp timestamp and assume a 0 clock skew.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c: (apply_latency),
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_query):
Remove jitter correction code, it's now in the lower level object.
Use new -core method for doing a peer query.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(calculate_skew), (rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Move jitter correction to the lowlevel jitterbuffer.
Increase the max window size.
When filling the window, already start estimating the skew using a
parabolic weighting factor so that we have a much better startup
behaviour that gets more accurate with the more samples we have.
Increase the default weighting factor for the steady state to get
smoother timestamps.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_dispose),
(gst_rtp_bin_finalize):
Fix cleanup crasher.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Dynamically adjust the skew calculation window so that we calculate it
over a period of around 2 seconds.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (new_ssrc_pad_found):
Link to the right pads regardless of which one was created first in the
ssrc demuxer.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_chain_recv_rtp), (gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsource.c: (calculate_jitter):
Improve debugging.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_finalize),
(gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_rtcp_sink_event), (gst_rtp_ssrc_demux_chain),
(gst_rtp_ssrc_demux_rtcp_chain),
(gst_rtp_ssrc_demux_internal_links):
* gst/rtpmanager/gstrtpssrcdemux.h:
Fix race in creating the RTP and RTCP pads when a new SSRC is detected.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_set_property),
(gst_rtp_bin_get_property):
Use lock to protect variable.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain),
(convert_rtptime_to_gsttime), (gst_rtp_jitter_buffer_loop):
Reconstruct GST timestamp from RTP timestamps based on measured clock
skew and sync offset.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(rtp_jitter_buffer_set_tail_changed),
(rtp_jitter_buffer_set_clock_rate),
(rtp_jitter_buffer_get_clock_rate), (calculate_skew),
(rtp_jitter_buffer_insert), (rtp_jitter_buffer_peek):
* gst/rtpmanager/rtpjitterbuffer.h:
Measure clock skew.
Add callback to be notfied when a new packet was inserted at the tail.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter), (rtp_source_send_rtp):
* gst/rtpmanager/rtpsource.h:
Remove clock skew detection, it's move to the jitterbuffer now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session):
Also set NTP base time on new sessions.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_query),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Use the right lock to protect our variables.
Fix some comment.
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_getcaps_send_rtp),
(gst_rtp_session_chain_send_rtp), (create_send_rtp_sink):
Implement getcaps on the sender sinkpad so that payloaders can negotiate
the right SSRC.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (calc_ntp_ns_base),
(gst_rtp_bin_change_state), (new_payload_found), (create_send_rtp):
Calculate and configure the NTP base time so that we can generate better
NTP times in SR packets.
Set caps on new ghostpad.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Clean debug statement.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_init), (gst_rtp_session_set_property),
(gst_rtp_session_get_property), (get_current_ntp_ns_time),
(rtcp_thread), (gst_rtp_session_event_recv_rtp_sink),
(gst_rtp_session_internal_links), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_recv_rtp_sink),
(create_send_rtp_sink):
* gst/rtpmanager/gstrtpsession.h:
Add ntp-ns-base property to convert running_time to NTP time.
Handle NEWSEGMENT events on send and recv RTP pads so that we can
calculate the running time and thus NTP time of the packets.
Simplify getting the current NTP time using the pipeline clock.
Implement internal links functions.
Use the buffer timestamp to calculate the NTP time instead of the clock.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_chain), (gst_rtp_ssrc_demux_rtcp_chain),
(gst_rtp_ssrc_demux_internal_links),
(gst_rtp_ssrc_demux_src_query):
* gst/rtpmanager/gstrtpssrcdemux.h:
Implement internal links function.
Calculate the diff between different streams, this might be used later
to get the inter stream latency.
* gst/rtpmanager/rtpsession.c: (rtp_session_send_rtp):
Simple cleanup.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter), (rtp_source_send_rtp), (rtp_source_get_new_sr):
Make the clock skew window a little bigger.
Apply the clock skew to all buffers, not just one with a new timestamp.
Calculate and debug sender clock drift.
Use extended last timestamp to interpollate for SR reports.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin-marshal.list:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_get_client),
(gst_rtp_bin_associate), (gst_rtp_bin_sync_chain), (create_stream),
(gst_rtp_bin_init), (caps_changed), (new_ssrc_pad_found),
(create_recv_rtp), (create_recv_rtcp), (create_send_rtp):
* gst/rtpmanager/gstrtpbin.h:
Updated example pipelines in docs.
Handle sync_rtcp buffers from the SSRC demuxer to perform lip-sync.
Set the default latency correctly.
Add some more points where we can get caps.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_query),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Add ts-offset property to control timestamping.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_init), (gst_rtp_session_set_property),
(gst_rtp_session_get_property), (get_current_ntp_ns_time),
(rtcp_thread), (stop_rtcp_thread), (gst_rtp_session_change_state),
(gst_rtp_session_send_rtcp), (gst_rtp_session_sync_rtcp),
(gst_rtp_session_cache_caps), (gst_rtp_session_clock_rate),
(gst_rtp_session_sink_setcaps), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_recv_rtp_sink),
(create_recv_rtcp_sink), (create_send_rtp_sink),
(create_send_rtcp_src):
Various cleanups.
Feed rtpsession manager with NTP time based on pipeline clock when
handling RTP packets and RTCP timeouts.
Perform all RTCP with the system clock.
Set caps on RTCP outgoing buffers.
* gst/rtpmanager/gstrtpssrcdemux.c: (find_demux_pad_for_ssrc),
(create_demux_pad_for_ssrc), (gst_rtp_ssrc_demux_base_init),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_rtcp_sink_event), (gst_rtp_ssrc_demux_chain),
(gst_rtp_ssrc_demux_rtcp_chain):
* gst/rtpmanager/gstrtpssrcdemux.h:
Also demux RTCP messages.
* gst/rtpmanager/rtpsession.c: (rtp_session_set_callbacks),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_rb), (rtp_session_process_sr),
(rtp_session_process_rr), (rtp_session_process_rtcp),
(rtp_session_send_rtp), (rtp_session_send_bye),
(session_start_rtcp), (session_report_blocks), (session_cleanup),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Remove the get_time callback, the GStreamer part will feed us with
enough timing information.
Split sync timing and RTCP timing information.
Factor out common RB handling for SR and RR.
Send out SR RTCP packets for lip-sync.
Move SR and RR packet info generation to the source.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (get_clock_rate), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_send_rtp),
(rtp_source_process_sr), (rtp_source_process_rb),
(rtp_source_get_new_sr), (rtp_source_get_new_rb),
(rtp_source_get_last_sr):
* gst/rtpmanager/rtpsource.h:
* gst/rtpmanager/rtpstats.h:
Use caps on incomming buffers to get timing information when they are
there.
Calculate clock scew of the receiver compared to the sender and adjust
the rtp timestamps.
Calculate the round trip in sources.
Do SR and RR calculations in the source.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_change_state), (gst_rtp_jitter_buffer_loop):
Use extended timestamp to release buffers from the jitterbuffer so that
we can handle the rtp wraparound correctly.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Improve Comments.
* gst/rtpmanager/gstrtpsession.c: (stop_rtcp_thread),
(gst_rtp_session_change_state), (gst_rtp_session_parse_caps),
(gst_rtp_session_clock_rate), (gst_rtp_session_sink_setcaps),
(gst_rtp_session_event_send_rtp_sink), (create_recv_rtp_sink),
(create_send_rtp_sink):
Also parse the sink caps for clock-rate instead of only relying on the
result of the signal.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
Make sure we fetch the clock rate for payloads we are sending out so
that we can use it for SR reports.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (stop_rtcp_thread),
(gst_rtp_session_change_state),
(gst_rtp_session_event_send_rtp_sink):
* gst/rtpmanager/gstrtpsession.h:
Distribute synchronisation parameters to the session manager so that it
can generate correct SR packets for lip-sync.
* gst/rtpmanager/rtpsession.c: (rtp_session_set_base_time),
(rtp_session_set_timestamp_sync), (session_start_rtcp):
* gst/rtpmanager/rtpsession.h:
Add methods for setting sync parameters.
Set correct RTP time in SR packets using the sync params.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
* gst/rtpmanager/rtpsource.h:
Record last RTP <-> GST timestamp so that we can use them to convert NTP
to RTP timestamps in SR packets.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_clear_pt_map):
Add some more advanced example pipelines.
* gst/rtpmanager/gstrtpsession.c: (rtcp_thread),
(stop_rtcp_thread), (gst_rtp_session_send_rtcp):
Add some debug and FIXME.
Release LOCK when performing session cleanup.
* gst/rtpmanager/rtpsession.c: (session_report_blocks):
Add some debug.
* gst/rtpmanager/rtpsource.c: (calculate_jitter),
(rtp_source_send_rtp):
Make sure we always send RTP packets with the session SSRC.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_change_state), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_query):
When synchronizing buffers, take peer latency into account.
Don't try to add our latency to invalid peer max latency values.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins-sections.txt:
* docs/plugins/gst-plugins-bad-plugins.hierarchy:
* docs/plugins/gst-plugins-bad-plugins.interfaces:
* docs/plugins/gst-plugins-bad-plugins.signals:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpbin.h:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpclient.h:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpjitterbuffer.h:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpptdemux.h:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpsession.h:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/rtpmanager/gstrtpssrcdemux.h:
Rename all GstRTPFoo structs to GstRtpFoo so that GST_BOILERPLATE
registers a GType that's different than the GstRTPFoo types that
farsight registers (luckily GType names are case sensitive). Should
finally fix#430664.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_set_property):
When drop-on-latency is set but we have no latency configured, just push
the buffer as fast as possible.
Fix typo in comment.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_sink_event), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Fix EOS handling.
Convert some DEBUG into WARNINGs.
Pause task when flushing.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(rtcp_thread), (gst_rtp_session_event_recv_rtcp_sink):
Use system clock for RTCP session management timeouts.
* gst/rtpmanager/rtpsession.c: (on_new_ssrc), (on_ssrc_collision),
(on_ssrc_validated), (on_bye_ssrc), (on_bye_timeout), (on_timeout):
Release the session lock when emiting signals.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_query):
Add some debug info.
* gst/rtpmanager/rtpsession.c: (rtp_session_init),
(rtp_session_send_rtp):
Store real user name in the session.
Original commit message from CVS:
* gst/rtpmanager/async_jitter_queue.c: (signal_waiting_threads),
(async_jitter_queue_pop_intern_unlocked):
Fix the case where the buffer underruns and does not block.
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_base_init),
(create_recv_rtcp), (create_send_rtp), (create_rtcp),
(gst_rtp_bin_request_new_pad):
Rename RTCP send pad, like in the session manager.
Allow getting an RTCP pad for receiving even if we don't receive RTP.
fix handling of send_rtp_src pad.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_chain):
When no pt map could be found, fall back to the sinkpad caps.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_send_rtp), (create_recv_rtp_sink),
(create_recv_rtcp_sink), (create_send_rtp_sink),
(create_send_rtcp_src):
Fix pad names.
* gst/rtpmanager/rtpsession.c: (source_push_rtp),
(rtp_session_create_source), (rtp_session_process_sr),
(rtp_session_send_rtp), (session_start_rtcp):
* gst/rtpmanager/rtpsession.h:
Unlock session when performing a callback.
Add callbacks for the internal session object.
Fix sending of RTP packets.
first attempt at adding NTP times in the SR packets.
Small debug and doc improvements.
* gst/rtpmanager/rtpsource.c: (rtp_source_send_rtp):
Update stats for SR reports.
Original commit message from CVS:
reviewed by: <delete if not using a buddy>
* gst/rtpmanager/gstrtpbin.c: (create_stream),
(gst_rtp_bin_class_init), (gst_rtp_bin_set_property),
(gst_rtp_bin_get_property):
* gst/rtpmanager/gstrtpbin.h:
Make default jitterbuffer latency configurable.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Debuging cleanups.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_finalize):
Don't use GLib-2.10 API, we only require GLib 2.8 at the moment.
Original commit message from CVS:
* configure.ac:
Disable rtpmanager for now because it depends on CVS -base.
* gst/rtpmanager/Makefile.am:
Added new files for session manager.
* gst/rtpmanager/gstrtpjitterbuffer.h:
* gst/rtpmanager/gstrtpbin.c: (create_session), (get_pt_map),
(create_stream), (pt_map_requested), (new_ssrc_pad_found):
Some cleanups.
the session manager can now also request a pt-map.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_base_init),
(gst_rtp_session_class_init), (gst_rtp_session_init),
(gst_rtp_session_finalize), (rtcp_thread), (start_rtcp_thread),
(stop_rtcp_thread), (gst_rtp_session_change_state),
(gst_rtp_session_process_rtp), (gst_rtp_session_send_rtp),
(gst_rtp_session_send_rtcp), (gst_rtp_session_clock_rate),
(gst_rtp_session_get_time), (gst_rtp_session_event_recv_rtp_sink),
(gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_recv_rtcp_sink),
(gst_rtp_session_chain_recv_rtcp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_send_rtcp_src),
(gst_rtp_session_request_new_pad):
* gst/rtpmanager/gstrtpsession.h:
We can ask for pt-map now too when the session manager needs it.
Hook up to the new session manager, implement the needed callbacks for
pushing data, getting clock time and requesting clock-rates.
Rename rtcp_src to send_rtcp_src to make it clear that this RTCP is to
be send to clients.
Add code to start and stop the thread that will schedule RTCP through
the session manager.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_finalize),
(rtp_session_set_property), (rtp_session_get_property),
(on_new_ssrc), (on_ssrc_collision), (on_ssrc_validated),
(on_bye_ssrc), (rtp_session_new), (rtp_session_set_callbacks),
(rtp_session_set_bandwidth), (rtp_session_get_bandwidth),
(rtp_session_set_rtcp_bandwidth), (rtp_session_get_rtcp_bandwidth),
(source_push_rtp), (source_clock_rate), (check_collision),
(obtain_source), (rtp_session_add_source),
(rtp_session_get_num_sources),
(rtp_session_get_num_active_sources),
(rtp_session_get_source_by_ssrc),
(rtp_session_get_source_by_cname), (rtp_session_create_source),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_sr), (rtp_session_process_rr),
(rtp_session_process_sdes), (rtp_session_process_bye),
(rtp_session_process_app), (rtp_session_process_rtcp),
(rtp_session_send_rtp), (rtp_session_get_rtcp_interval),
(rtp_session_produce_rtcp):
* gst/rtpmanager/rtpsession.h:
The advanced beginnings of the main session manager that handles the
participant database of RTPSources, SSRC probation, SSRC collisions,
parse RTCP to update source stats. etc..
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_init), (rtp_source_finalize), (rtp_source_new),
(rtp_source_set_callbacks), (rtp_source_set_as_csrc),
(rtp_source_set_rtp_from), (rtp_source_set_rtcp_from),
(push_packet), (get_clock_rate), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_process_bye),
(rtp_source_send_rtp), (rtp_source_process_sr),
(rtp_source_process_rb):
* gst/rtpmanager/rtpsource.h:
Object that encapsulates an SSRC and its state in the database.
Calculates the jitter and transit times of data packets.
* gst/rtpmanager/rtpstats.c: (rtp_stats_init_defaults),
(rtp_stats_calculate_rtcp_interval), (rtp_stats_add_rtcp_jitter):
* gst/rtpmanager/rtpstats.h:
Various stats regarding the session and sources.
Used to calculate the RTCP interval.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin-marshal.list:
Some more custom marshallers.
* gst/rtpmanager/gstrtpbin.c: (create_session), (get_pt_map),
(clock_rate_request), (create_stream), (gst_rtp_bin_class_init),
(pt_map_requested), (new_ssrc_pad_found), (create_recv_rtp):
* gst/rtpmanager/gstrtpbin.h:
Prepare for caching pt maps.
Connect to signals to collect pt maps.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_setcaps), (gst_rtp_jitter_buffer_loop):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add request_clock_rate signal.
Use scale insteat of scale_int because the later does not deal with
negative numbers.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_class_init),
(gst_rtp_pt_demux_chain):
* gst/rtpmanager/gstrtpptdemux.h:
Implement request-pt-map signal.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_class_init),
(gst_rtp_bin_init), (gst_rtp_bin_provide_clock):
* gst/rtpmanager/gstrtpbin.h:
Provide a clock.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_setcaps), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Add some debug and comments.
Fix double unref() in error cases.
In ID3 v2.3 compressed frames will have a 4-byte data length indicator
after the frame header to indicate the size of the decompressed data.
This integer is unlikely to be a sync-safe integer for v2.3 tags,
only in v2.4 it's sync-safe.
Reversing the unsynchronisation seems to work slightly differently
for ID3 v2.3 tags and v2.4 tags: v2.3 tags don't have syncsafe frame
sizes in the frame header, so the unsynchronisation is applied to
the whole frame data including all the frame headers. v2.4 frames
have sync-safe sizes, however, so the unsynchronisation only needs
to be applied to the actual frame data, and it seems that's what's
being done as well. So we need to undo the unsynchronisation on a
per-frame basis for v2.4 tags for things to work properly.
Fixes extraction of coverart/images from APIC frames in ID3 v2.4
tags (#588148).
Add unit test for this as well.
Whenever we see a gap, we flush the temporary packets (but not the adapter). If we
had some data temporarily stored it will be outputted (the sound will sound a bit
garbled... but that's how it sounds on MacOSX :)
Reverse-engineered by comparing:
* A rtp hinted file provided by DarwinStreamingServer
* The output procued by DSS for that same file
Also used various streaming sources available on the internet to fine-tune
the code.
The header/codec_data extraction methods are from FFMpeg (LGPL).
Use some of the SDP attributes when they are present to specify the output
dimension and framerate. This allows us to receive jpeg frames larger than
2040 width/height.
Fixes#564437
sizeof("foo") includes the string's NUL-terminator in the size returned,
but we're writing strings here with an explicit size at the beginning
and no NUL-terminator. In most cases using sizeof("foo") as length in
memcpy is not harmful, but it is where the string goes right at the
end of our buffer to write, since we don't allocate space for that
NUL terminator.
These filters use information from previous frames to
generate the current frame and a caps change will make
the effect start from the beginning again.
