This reverts commit d22ec49632.
Application code might expect that it only gets external sources on those
signals, and get confused by this. If anything we would need to add new
signals.
Without this it seems impossible for an application to easily get notified
about the internal ssrcs that are created, e.g. sender sources, and also
to know when they are active and produce RTCP packets.
https://bugzilla.gnome.org/show_bug.cgi?id=746747
We now take the maximum of 2*jitter and 0.5*packet_spacing for the extra
delay. If jitter is very low, this should prevent unnecessary retransmission
requests to some degree.
https://bugzilla.gnome.org/show_bug.cgi?id=748041
When we are in passthrough, the transform function doesn't run and if the
passthrough check is in this function it will never be deactivated. Fix this by
checking directly whenever a gain is changed.
Also set the passthrough to TRUE at init because the gains default to 0, so we
can passthrough until any gain property is changed.
https://bugzilla.gnome.org/show_bug.cgi?id=748068
Prevents an extra unref of GstBuffer when passing a non-icy stream through
icydemux with metadata-interval set to 0.
Reproducible with:
gst-launch-1.0 filesrc location=~/testsong.mp3 ! \
'application/x-icy,metadata-interval=(int)0' ! icydemux ! decodebin ! wavenc ! \
filesink location=~/testsong.wav
https://bugzilla.gnome.org/show_bug.cgi?id=748024
because _release_pad tries to release it from ctx->sinkpad, which is
multiqueue's sink pad, and currently fails because the probe is not
installed there
This also happens in the very beginning when we receive the first packet, a
warning would be very confusing here. In all places where we should warn about
this, we would've printed a warning already before.
Right above we consider lost_packet packets, each of them having duration,
as lost and triggered their timers immediately. Below we use expected_dts
to schedule retransmission or schedule lost timers for the packets that
come after expected_dts.
As we just triggered lost_packets packets as lost, there's no point in
scheduling new timers for them and we can just skip over all lost packets.
https://bugzilla.gnome.org/show_bug.cgi?id=739868
Resetting the jitterbuffer drops all packets and other things, and will cause
a discontinuity in the packets received by the depayloaders. They should now
also flush anything they had pending as the new data will start at a different
position.
https://bugzilla.gnome.org/show_bug.cgi?id=739868
When doing key uint seek, qtdemux calls gst_qtdemux_adjust_seek
to get proper offset. And then this offset is set to
segment.position and segment.time in gst_qtdemux_perform_seek but
segment.start is not updated.
After that, application sends segment query,
qtdemux sets start and stop to query using gst_segment_to_stream_time. Due
to the wrong value in segment.start, the stop position is smaller than
it should.
https://bugzilla.gnome.org/show_bug.cgi?id=746822
We always write the CTTS in qtmux. Ideally we only want to do that
for streams that need DTS, it should be present on the track information
rather than be decided based on each buffer
As qt uses durations, it doesn't matter, only the difference
between consecutive buffers is important. Also, collectpads
already replaces PTS/DTS with the running times for them.
Instead of checking various state variables around the muxer,
track the current muxing mode in a single 'mux_mode' enum.
Add some implementation notes about the different mux modes
gst_segment_do_seek() does that for us already, and doing it twice
will break non-flushing seeks in interesting ways. Leftover from 1.0
porting.
Also copy over segment offset and applied_rate, just in case.
When multifilesink is operating in any mode other than one file
per buffer, the last file created won't have a file message posted
as multifilesink doesn't handle the EOS event.
This patch fixes it by using the last position to post a file
message when EOS is received. This should ensure at least the
time related data and the filename are posted to the application
or other elements
https://bugzilla.gnome.org/show_bug.cgi?id=747000
When not in fast-start or fragmented mode, we need to be able
to rewrite the size of the mdat atom, or else the output just
won't be playable - the mdat placeholder with size == 0 will
cover the rest of the file, including any moov atom we write out.
https://bugzilla.gnome.org/show_bug.cgi?id=708808
New tags can be found on different parts of the file, so this patch
keeps the stream taglists around for the life cycle of the pad
and adds those new tags as found. Then a new tag is found, the
pad's is marked with a tags changed flag, making the element push
a new tag event on the next check. Before this, we were sending
only the newly found tags, as the element was losing its taglist
when pushing the event.
Global tags are already being read in matroskaparse, but they are not
currently being sent.
This patch makes global tags get sent incrementally whenever new ones
are found.
https://bugzilla.gnome.org/show_bug.cgi?id=746242
When planes property is set to 0, the pipeline executes in
an infinite loop and never exits. Since planes must never
be 0, set the minimum value in the property description
to 1.
https://bugzilla.gnome.org/show_bug.cgi?id=743906
It is expected that buffers are time-stamped with running time. Set
a segment accordingly. In this case we pick 0,-1 as this is what udpsrc
would do. Depayloaders will update the segment to reflect the playback
position.
https://bugzilla.gnome.org/show_bug.cgi?id=635701
The segment start/stop in the query is meant to represent the seekable
portion of the stream. It does not match the segment start/stop. Instead
export 0 to duration.
Previously we were setting new caps with the same content for every H264 or
AAC codec_data we found in the stream, spamming everything and causing
renegotiations.
Instead delay creating the caps until we read the codec_data from the stream,
or fail if we get normal data before the codec_data.
AAC raw caps and H264 avc caps always need codec_data, setting caps on the pad
without them is going to make negotiation fail most of the time. Even if we
later set new caps with the codec_data, that's usually going to be too late.
https://bugzilla.gnome.org/show_bug.cgi?id=746682
Make sure that the sync_src pad has caps before the segment event.
Otherwise we might get a segment event before caps from the receive
RTCP pad, and then later when receiving RTCP packets will set caps.
This will results in a sticky event misordering warning
This fixes warnings in the rtpaux unit test but also in the
rtpaux and rtx examples in tests/examples/rtp
https://bugzilla.gnome.org/show_bug.cgi?id=746445
Before we only started it when either:
- there is no send RTP stream
or
- we received an RTP packet for sending
This could mean that if the send RTP pads are connected but never receive any
RTP data, and the same session is also used for receiving RTP/RTCP, we would
never start the RTCP thread and would never send RTCP for the receiving part
of the session.
This can be reproduced with a pipeline like:
gst-launch-1.0 rtpbin name=rtpbin \
udpsrc port=5000 ! "application/x-rtp, media=video, clock-rate=90000, encoding-name=H264" ! rtpbin.recv_rtp_sink_0 \
udpsrc port=5001 ! rtpbin.recv_rtcp_sink_0 \
rtpbin.send_rtcp_src_0 ! fakesink name=rtcp_fakesink silent=false async=false sync=false \
rtpbin.recv_rtp_src_0_2553225531_96 ! decodebin ! xvimagesink \
fakesrc ! valve drop=true ! rtpbin.send_rtp_sink_0 \
rtpbin.send_rtp_src_0 ! fakesink name=rtp_fakesink silent=false async=false sync=false -v
Before this change the rtcp_fakesink would never send RTCP for the receiving
part of the session (i.e. no receiver reports!), after the change it does.
And before and after this change it would send RTCP for the receiving part of
the session if the sender part was omitted (the last two lines).
* Fix critical when new tags are found after segment event has already
been sent.
* Send global tags before stream tags.
* Split sending of tags out of gst_matroska_demux_send_event() into its
own function.
https://bugzilla.gnome.org/show_bug.cgi?id=745973
Previously we advanced the in_data pointer by bps for every channel, and then
later again for block_size*bps. This caused us to be one sample further than
expected if an input buffer covered two analysis frames. And in the end lead
to completely bogus values reported by level.
https://bugzilla.gnome.org/show_bug.cgi?id=746065
These are outside the expected range of sequence numbers and should be
clipped, especially for RTSP they might belong to packets from before a seek
or a previous stream in general.
We need to set up the transport in any case, not just if we have a container
stream or a non-interleaved stream. Only if we have an interleaved stream and
are retrying, we should not set up the stream again.
https://bugzilla.gnome.org/show_bug.cgi?id=745599
Otherwise we will get not-negotiated later from rtpbin, and will never be able
to send RTCP packets back to the server. Note that error flow returns from the
RTCP pads are ignored, that's why it didn't fail more visible before.
This reverts commit 1591adf4cd.
https://bugzilla.gnome.org/show_bug.cgi?id=745586#c1:
It's the beginning of an implementation of RFC 2762, which is needed for
large multicast groups. The implementation is not yet complete but why
not leave what is there and implement RFC 2762 instead?
rtpsession declares an array of maps to store srrcs but only the
the key 0 is being used. This patch replaces the array of maps
for just one map and remove useless parameters in rtpsession
https://bugzilla.gnome.org/show_bug.cgi?id=745586
In gst_avi_demux_handle_src_query, there is not needed code.
We already check about stream is vbr or not at the upper line.
o, we don't need to check this condition becase stream is not
vbr 100% in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=745276
Unlike many other seek flags, the KEY_UNIT seek
flag is not copied over into the GstSegment,
since it's only relevant for the seek itself,
so we need to pass it explicitly to the seek
handler here.
https://bugzilla.gnome.org/show_bug.cgi?id=745339
We need different symbol names, because these symbols are also present
in the fragmented plugin ... which will cause conflicts when doing
static linking
The number of FFTs is calculated with the following formula:
guint nfft = 2 * bands - 2;
nfft is passed to gst_fft_f32_new() as the len argument and is of type
unsigned integer. This method required that len is at leas 1, then
maximum G_MAXINT, as other values would be negative. If we extrapolate
from the formula above it means we need "bands" to be between 2 and
((guint)G_MAXINT + 2) / 2).
https://bugzilla.gnome.org/show_bug.cgi?id=744213
Using the sparse streams can make the push-based seeking return
too far in the stream. It also can lead to issues as the
sparse streams will be ignored when restarting playback and,
if the sparse stream is the one that has the earliest sample,
it will confuse qtdemux's offsets as one stream will have
an earlier offset than the demuxer's one which might lead to
early EOS.
https://bugzilla.gnome.org/show_bug.cgi?id=742661
Parse the 'sidx' atom and update the total duration according to the
parser result. The isoff parser code is imported from
gst-plugins-bad's dashdemux and a gst_isoff_sidx_parser_add_data()
function was factored out of the gst_isoff_sidx_parser_add_buffer()
function.
https://bugzilla.gnome.org/show_bug.cgi?id=743578
According to RFC 4585 section 3.5.3 step 1 we are not allowed to send
an early RTCP packet for the very first one. It must be a regular one.
Also make sure to not use last_rtcp_send_time in any calculations until
we actually sent an RTCP packet already. In specific this means that we
must not use it for forward reconsideration of the current RTCP send time.
Instead we don't do any forward reconsideration for the first RTCP packet.
Assignment is done to variable segment.stop when the intention was to assign to
local variable stop. Instead of overwriting it, the value is now clamped and
segment.stop is set to it soon after.
CID #1265773
Handle the case where a short file reaches EOS while we're still
waiting for no-more-pads, and make sure we continue to the internal
READY state for real playback to work properly later.
Implement 2 new elements - splitmuxsink and splitmuxsrc.
splitmuxsink is a bin which wraps a muxer and takes 1 video stream,
plus audio/subtitle streams, and starts a new file
whenever necessary to avoid overrunning a threshold of either bytes
or time. New files are started at a keyframe, and corresponding audio
and subtitle streams are split at packet boundaries to match
video GOP timestamps.
splitmuxsrc is a corresponding source element which handles
the splitmux:// URL and plays back all component files,
reconstructing the original elementary streams as it goes.
We detect a container correctly now so we need to revert the weird
check there was before.
Use gst_rtspsrc_stream_push_event() to push the caps event on the
right pad.
See https://bugzilla.gnome.org/show_bug.cgi?id=739391
Keep global and stream tags separately and parse the udta node
that can be found under the trak atom. The udta will contain
stream specific tags and will be pushed as such
https://bugzilla.gnome.org/show_bug.cgi?id=692473
Tags received via events, when marked as stream tags, will
be stored on that stream's trak atom instead of being stored
in the main tags atom. This allows the resulting file to have
global and stream tags stored.
https://bugzilla.gnome.org/show_bug.cgi?id=692473
Refactor the functions that were bound to the 'moov' atom to
directly pass the desired 'udta' that should receive the tags.
This allows the tags to be written to 'udta' at the 'moov' or
the 'trak' level, creating tags that are for the container or
for a stream only.
https://bugzilla.gnome.org/show_bug.cgi?id=692473
Snap to the end of the file when seeking past the end in reverse mode,
and also fix GST_SEEK_TYPE_END and GST_SEEK_TYPE_NONE handling
for the stop position by always seeking on a segment in stream time
This will be emitted whenever an RTCP packet is received. Different to
on-feedback-rtcp, this signal gets every complete RTCP packet and not
just the individual feedback packets.
For fragmented streams with extra data at the end of the mdat
qtdemux was not dropping those bytes and would try to use
that extra data as the beginning of a new atom, causing the
stream to fail.
https://bugzilla.gnome.org/show_bug.cgi?id=743407
It had no effect since quite some time and also is not needed in general,
especially not to switch between immediate feedback mode and early feedback
mode. The latest understanding of the RFC is that from the endpoint point of
view, both modes are exactly the same. RTCP is only allowed to use the
bandwidth as given by the RFC constraints, as such it is only ever possible
to schedule a RTCP packet early but it's against the RFC to schedule more RTCP
packets.
The difference between immediate feedback mode and early feedback mode is that
the former guarantees that an RTCP packet can be sent for every event
"immediately", which means that the bandwidth calculations from the RFC have
resulted in an RTCP scheduling interval that is small enough. Early feedback
mode on the other hand means that we can schedule some packets early to make
that happen, but it's not guaranteed at all that it's possible to schedule
an RTCP packet per event (i.e. they need to be accumulated or dropped).
This indicates with a boolean return value if scheduling a new RTCP packet
within the requested delay was possible. Otherwise it behaves exactly like
send-rtcp. The only reason for adding a new signal is ABI compatibility.
No matter if gst_matroska_read_common_parse_index_cuetrack () returns that the
flow is OK or not, the check there will be a break from the switch. Removing the
check since the outcome is the same.
CID #1265762
Bringing back the check removed in the previous commit but have that check be a
g_assert. Changing the function to static void since return can never be False,
because audio format will never be unkown.
func_index is set by the sum of three ternary operators which add, 0:4, 0:2,
and 1:0. Minimum value would be 0+0+0=0, and maximum would be 4+2+1=7.
The conditional checking if func_index is >= 0 and < 8 will always be true.
Removing it.
CID 1226442
We (currently?) can't really handle gaps between RTP packets if they're not
properly timestamped. The current code would go into calculations with
GST_CLOCK_TIME_NONE and then cause assertions everywhere. It's probably
better to error out cleanly instead.
We set to PLAYING after we have configured the caps, otherwise we
might end up calling request_key (with SRTP) while caps are still
being configured, ending in a crash.
https://bugzilla.gnome.org/show_bug.cgi?id=740505
Actually copy the codec data instead of copying nothing
and then bombing out because there's no data.
Fixes: gst-launch-1.0 audiotestsrc ! avenc_alac ! qtmux ! fakesink
https://bugzilla.gnome.org/show_bug.cgi?id=741783
Apparently linphone sends an invalid RTP packet as very
first packet. We want to ignore that instead of erroring
out (same for any other invalid packets really).
https://bugzilla.gnome.org/show_bug.cgi?id=741398
Instead of constantly querying upstream, just cache the last duration,
and in the unlikelyness we might have gone over query again before
deciding we are EOS.
Cut 15% cpu off matroskademux streaming thread (srsly...)
This is meant to be so (https://wiki.xiph.org/MatroskaOpus - while
it is marked as a draft, this part was confirmed to be correct on
IRC), and allows one to determine whether a demuxed stream is
multistream or not, and thus set the multistream caps field
accordingly. In turn, this means downstream does not have to guess.
https://bugzilla.gnome.org/show_bug.cgi?id=740744
It's like rendering a buffer list, just with one buffer.
Has the added advantage that if there are multiple clients
we can send the buffer to all the clients in one go.
We unlock and re-lock the client lock while emitting the
removed signal, which causes inconsistencies in the client
list vs. the client counts. Instead, remove the client from
the list already before emitting the signal and put it into
a temporary list of clients to be removed. That way things
look consistent to the streaming thread, but signal callbacks
can still do things like get stats from removed clients.
Add prototype for a render_list() function that can use a
sendmmsg-style g_socket_send_messages() function once it lands
in GLib. We can use this infrastructure to send multiple buffers
made up by multiple memories to multiple clients in one go, which
drastically reduces the number of syscalls made when sending
high-bitrate video streams.
https://bugzilla.gnome.org/show_bug.cgi?id=732152
Use the refcount for memory management and keep track
of the number of duplicate clients in a separate
variable. This will be useful later, and means we
don't have to hold the OBJECT_LOCK all the time.
https://bugzilla.gnome.org/show_bug.cgi?id=732866
Since "basetransform: Fix caps equality check" commit a7f357,
set_info() will not be called anymore if crop didn't change
the caps. This is fixed by setting "need_update" boolean when
cropping properties has been changed, and then applying these
if they where not applied before rendering the next frame. This
patch also fixed the locking, dropping un-needed custom lock,
and no holding needless lock while doing the operation as we
already hold the streaming lock.
https://bugzilla.gnome.org/show_bug.cgi?id=740787
In some cases the currently set GstVideoInfo is not interlaced, but
upstream caps are interlaced and the info is passed in the filter,
we should take that info into account and make sure that we do not
consider that case as a "pass through" case.
https://bugzilla.gnome.org/show_bug.cgi?id=741407
A race condition in the state change function may cause buffers
to be unreffed while they are still used by the streaming thread
in gst_rtp_h264_pay_send_sps_pps() resulting in a crash. Chain
up to the parent class first in the state change function to
make sure streaming has stopped and only then free those buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=741381
When dealing with fragmented files, we will get more accurate duration
information via the mfra and moof atoms.
In order for playback to not stop at the initial duration (from the
moov atom), we need to check and update the various duration variables
when we find more information.
Fixes playback of fragmented files in pull mode
Adds a new set of properties to make pushfilesrc output a TIME SEGMENT
(instead of the filesrc BYTE SEGMENT).
When time-segment is set to True the following will happen:
* Seeks are refused (data starts from the beginning of the file)
* The BYTE segment will be replaced by a TIME segment with the values
specified in the various properties
* The first outgoing buffer will have a timestamp set on it (by default
it has a value of GST_CLOCK_TIME_NONE)
When seeking or finding the previous keyframe, do
comparisons against targets and segments using composition time
to correctly decide which sample times match.
We used to setup an iterator with 1 GValue set with a NULL object
pointer which is not the normal way to do that. Instead we should make
sure that the first call to gst_iterator_next returns GST_ITERATOR_DONE.
Currently during header parsing, we scan through the entire file
and skip every moof+mdat chunk for fragmented mp4s, which makes
start-up incredibly slow. Instead, just stop at the first moof
chunk when have a moov, and start exposing the streams, so we
can go and start handling the moofs for real.
When an caps-event is received, we must immediately change the crop
to videocrop correctly changed caps-event dimension, otherwise the
videocrop will first use the previous value of the crop that when
resizing video to a smaller resolution may cause an error.
https://bugzilla.gnome.org/show_bug.cgi?id=740671
Empty segments in an edit list have a media_start time of -1,
as they don't actually play any media. Allow for that when
aligning to the reference stream in reverse play.
