As part of this also change the default bitrate value to 0. The default
value was 256000 previously. In reality, if the property was not set the
bitrate value would be scaled according to the resolution which is not
very intuitive behavior. It is better to use 0 for this purpose. Now
together with newly introduced property "bits-per-pixel" 0 means to
assign the bitrate according to resolution/framerate.
The default bitrates are now
- 1.2Mbps for VP8 720p@30fps
- 0.8Mbps for VP9 720p@30fps
and scaled accordingly for different resolutions/framerates.
Previously the default bitrate was also not scaled according to the
framerate but only took the resolution into account.
This also fixes the side effect of setting bitrate to 0. Previously
encoder would not produce any data at all.
Addition from Sebastian Dröge <sebastian@centricular.com> to assume
30fps if no framerate is given in the caps instead of not calculating
any bitrate at all.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/611>
For VP8 it's possible to signal width or height to be 0, but it does
not make sense to do so. For VP9 it's impossible. Hence, we most
likely have a corrupt stream. Trying to negotiate caps downstream with
either width or height as 0 will fail with something like
gst_video_decoder_negotiate_default: assertion 'GST_VIDEO_INFO_WIDTH (&state->info) != 0' failed
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/merge_requests/610>
We don't do any blending by ourselves since a while now.
Note that this is a regression in "supported" formats: previously
ARGB64 was supported, for example, but in practice it caused blending to
not take place at all.
Without a qmlglsink, we need to retrieve the window system display
ourselves rather than relying solely on qmlglsink to have priority on
the choice of display.
deleting a QOpenGLFrameBufferObject needs to occur on the same thread it
was created on in order to actually free the relevant resources
immediately. Otherwise, they will be queued for deletion and not freed
until the associated QOpenGLContext is destroyed.
By explictly including QtGui/qopengl.h we force the code path that
defines GLsync in the Qt-specific way. Without that, some platforms
failed to compile the qmlgl plugin, since neither Qt nor gstreamer
defined GLsync then, leading to e.g.:
```
make[4]: Entering directory '/.../gst-plugins-good-1.16.1/ext/qt'
CXX libgstqmlgl_la-qtitem.lo
In file included from gstqtgl.h:32,
from qtitem.h:27,
from qtitem.cc:28:
/.../usr/include/gstreamer-1.0/
gst/gl/gstglfuncs.h:93:17: error: expected identifier before ‘*’ token
ret (GSTGLAPI *name) args;
^
/.../usr/include/gstreamer-1.0/
gst/gl/glprototypes/sync.h:27:1: note: in expansion of macro
‘GST_GL_EXT_FUNCTION’
GST_GL_EXT_FUNCTION (GLsync, FenceSync,
^~~~~~~~~~~~~~~~~~~
```
Disable session sharing and cookie jar when cookies property is set.
The cookie jar actually replaces or removes any existing Cookie header
set on the message, so the cookies property was effectively being
ignored. There doesn't appear to be a way to inject the cookies into the
jar without having to specify matching domains etc., so it's not
possible to simulate the old behaviour of unconditionally sending the
cookies with all messages, besides simply disabling the cookie jar.
In Google webrtc, the setting VP8E_SET_STATIC_THRESHOLD is set to 1
(except when the content is known to be static very often in which
case it is set to 100, i.e. when sharing screen with Google Hangouts).
The cpu usage drops a lot when using 1 for above setting because it
allows the encoder to skip static/low content blocks. The current
0 default value uses too much cpu and confuses the user regarding
the cpu usage expectations. User expects vp8enc to use low cpu by
default.
Documentation of VP8E_SET_STATIC_THRESHOLD:
https://github.com/webmproject/libvpx/blob/master/vpx/vp8cx.h#L188
chromium/webrtc:
b484ec0082/modules/video_coding/codecs/vp8/libvpx_vp8_encoder.cc (822)Closes#58
If Mesa is built without X11 headers, building against Mesa EGL headers
requires a dependency on egl.pc, to define MESA_EGL_NO_X11_HEADERS.
This fixes a build error when compiling ext/qt/gstqtglutility.cc:
In file included from /usr/include/EGL/egl.h:39,
from /usr/include/gstreamer-1.0/gst/gl/egl/gstegl.h:44,
from ../gst-plugins-good-1.16.1/ext/qt/gstqtglutility.cc:43:
/usr/include/EGL/eglplatform.h:124:10: fatal error: X11/Xlib.h: No such file or directory
By passing `NULL` to `g_signal_new` instead of a marshaller, GLib will
actually internally optimize the signal (if the marshaller is available
in GLib itself) by also setting the valist marshaller. This makes the
signal emission a bit more performant than the regular marshalling,
which still needs to box into `GValue` and call libffi in case of a
generic marshaller.
Note that for custom marshallers, one would use
`g_signal_set_va_marshaller()` with the valist marshaller instead.
If the the height is not a multiple of the macro block size then the memory
of the last line is reused for all extra lines. This is no problem if the
last line is duplicated properly. However, if the extra lines are not
initialized properly during encoding, then the last visible line is
overwritten with undefined data.
Use a extra buffer to avoid this problem.
Used to print:
|Run-time dependency vpx found: YES 1.7.0
|Message: libvpx provides VP8 encoder interface (vpx_codec_vp8_cx_algo)
|Message: libvpx provides VP8 decoder interface (vpx_codec_vp8_dx_algo)
|Message: libvpx provides VP9 encoder interface (vpx_codec_vp9_cx_algo)
|Message: libvpx provides VP9 decoder interface (vpx_codec_vp9_dx_algo)
|Dependency vpx found: YES (cached)
|Dependency vpx found: NO found '1.7.0' but need: '>=1.8.0'
|Run-time dependency vpx found: NO (tried pkgconfig and cmake)
We can check the version of the found dep in a way that
doesn't produce this confusing output.
Port objects acquired with jack_get_ports() need to be freed with
jack_free(3), not stdlib free().
On Windows, Jack may be linked against different libc than GStreamer
libraries so free()ing port objects directly might cause crash because
of libc mismatch.
As of Qt >= 5.5, qmake do not link to opengl32 by default anymore. This commit adds opengl32.lib to the .pro
file so that the plugin can be build using QtCreator on Windows.
On other OSes, it's not possible to have qmake or the qt5 pkg-config
files and not have moc, and `moc` will not be in `PATH`, so this only
causes problems.
The FLAC specification states that the data is processed in blocks, regardless of the number of channels. Thus, The latency can be calculated using the blocksize and rate. For example a 1 second block sampled at 44.1KHz has a blocksize of 44100
It is possible that PulseAudio adds formats that are not yet supported
in pulsesink, and in those cases, we want to gracefully skip them rather
than cause an assert on a NULL caps.
This was originally added for fixing conflicting definitions between
Android and Qt, but times have changed and now this breaks the build
on iOS:
[...]/OpenGLES.framework/Headers/ES3/gl.h:1006:48: error: unknown type name 'gst_qt_GLsync'
GL_API void GL_APIENTRY glGetSynciv (GLsync sync, GLenum pname, GLsizei bufSize, GLsizei* length, GLint* values) OPENGLES_DEPRECATED(ios(7.0, 12.0), tvos(9.0, 12.0));
^
../ext/qt/gstqtgl.h:49:16: note: expanded from macro 'GLsync'
#define GLsync gst_qt_GLsync
^
6 errors generated.
Instead, we simply avoid defining GLsync ourselves if we're using Qt.
