* Fix critical when new tags are found after segment event has already
been sent.
* Send global tags before stream tags.
* Split sending of tags out of gst_matroska_demux_send_event() into its
own function.
https://bugzilla.gnome.org/show_bug.cgi?id=745973
Previously we advanced the in_data pointer by bps for every channel, and then
later again for block_size*bps. This caused us to be one sample further than
expected if an input buffer covered two analysis frames. And in the end lead
to completely bogus values reported by level.
https://bugzilla.gnome.org/show_bug.cgi?id=746065
These are outside the expected range of sequence numbers and should be
clipped, especially for RTSP they might belong to packets from before a seek
or a previous stream in general.
We need to set up the transport in any case, not just if we have a container
stream or a non-interleaved stream. Only if we have an interleaved stream and
are retrying, we should not set up the stream again.
https://bugzilla.gnome.org/show_bug.cgi?id=745599
Otherwise we will get not-negotiated later from rtpbin, and will never be able
to send RTCP packets back to the server. Note that error flow returns from the
RTCP pads are ignored, that's why it didn't fail more visible before.
This reverts commit 1591adf4cd.
https://bugzilla.gnome.org/show_bug.cgi?id=745586#c1:
It's the beginning of an implementation of RFC 2762, which is needed for
large multicast groups. The implementation is not yet complete but why
not leave what is there and implement RFC 2762 instead?
rtpsession declares an array of maps to store srrcs but only the
the key 0 is being used. This patch replaces the array of maps
for just one map and remove useless parameters in rtpsession
https://bugzilla.gnome.org/show_bug.cgi?id=745586
In gst_avi_demux_handle_src_query, there is not needed code.
We already check about stream is vbr or not at the upper line.
o, we don't need to check this condition becase stream is not
vbr 100% in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=745276
Unlike many other seek flags, the KEY_UNIT seek
flag is not copied over into the GstSegment,
since it's only relevant for the seek itself,
so we need to pass it explicitly to the seek
handler here.
https://bugzilla.gnome.org/show_bug.cgi?id=745339
We need different symbol names, because these symbols are also present
in the fragmented plugin ... which will cause conflicts when doing
static linking
The number of FFTs is calculated with the following formula:
guint nfft = 2 * bands - 2;
nfft is passed to gst_fft_f32_new() as the len argument and is of type
unsigned integer. This method required that len is at leas 1, then
maximum G_MAXINT, as other values would be negative. If we extrapolate
from the formula above it means we need "bands" to be between 2 and
((guint)G_MAXINT + 2) / 2).
https://bugzilla.gnome.org/show_bug.cgi?id=744213
Using the sparse streams can make the push-based seeking return
too far in the stream. It also can lead to issues as the
sparse streams will be ignored when restarting playback and,
if the sparse stream is the one that has the earliest sample,
it will confuse qtdemux's offsets as one stream will have
an earlier offset than the demuxer's one which might lead to
early EOS.
https://bugzilla.gnome.org/show_bug.cgi?id=742661
Parse the 'sidx' atom and update the total duration according to the
parser result. The isoff parser code is imported from
gst-plugins-bad's dashdemux and a gst_isoff_sidx_parser_add_data()
function was factored out of the gst_isoff_sidx_parser_add_buffer()
function.
https://bugzilla.gnome.org/show_bug.cgi?id=743578
According to RFC 4585 section 3.5.3 step 1 we are not allowed to send
an early RTCP packet for the very first one. It must be a regular one.
Also make sure to not use last_rtcp_send_time in any calculations until
we actually sent an RTCP packet already. In specific this means that we
must not use it for forward reconsideration of the current RTCP send time.
Instead we don't do any forward reconsideration for the first RTCP packet.
Assignment is done to variable segment.stop when the intention was to assign to
local variable stop. Instead of overwriting it, the value is now clamped and
segment.stop is set to it soon after.
CID #1265773
Handle the case where a short file reaches EOS while we're still
waiting for no-more-pads, and make sure we continue to the internal
READY state for real playback to work properly later.
Implement 2 new elements - splitmuxsink and splitmuxsrc.
splitmuxsink is a bin which wraps a muxer and takes 1 video stream,
plus audio/subtitle streams, and starts a new file
whenever necessary to avoid overrunning a threshold of either bytes
or time. New files are started at a keyframe, and corresponding audio
and subtitle streams are split at packet boundaries to match
video GOP timestamps.
splitmuxsrc is a corresponding source element which handles
the splitmux:// URL and plays back all component files,
reconstructing the original elementary streams as it goes.
We detect a container correctly now so we need to revert the weird
check there was before.
Use gst_rtspsrc_stream_push_event() to push the caps event on the
right pad.
See https://bugzilla.gnome.org/show_bug.cgi?id=739391
Keep global and stream tags separately and parse the udta node
that can be found under the trak atom. The udta will contain
stream specific tags and will be pushed as such
https://bugzilla.gnome.org/show_bug.cgi?id=692473
Tags received via events, when marked as stream tags, will
be stored on that stream's trak atom instead of being stored
in the main tags atom. This allows the resulting file to have
global and stream tags stored.
https://bugzilla.gnome.org/show_bug.cgi?id=692473
Refactor the functions that were bound to the 'moov' atom to
directly pass the desired 'udta' that should receive the tags.
This allows the tags to be written to 'udta' at the 'moov' or
the 'trak' level, creating tags that are for the container or
for a stream only.
https://bugzilla.gnome.org/show_bug.cgi?id=692473
Snap to the end of the file when seeking past the end in reverse mode,
and also fix GST_SEEK_TYPE_END and GST_SEEK_TYPE_NONE handling
for the stop position by always seeking on a segment in stream time
This will be emitted whenever an RTCP packet is received. Different to
on-feedback-rtcp, this signal gets every complete RTCP packet and not
just the individual feedback packets.
For fragmented streams with extra data at the end of the mdat
qtdemux was not dropping those bytes and would try to use
that extra data as the beginning of a new atom, causing the
stream to fail.
https://bugzilla.gnome.org/show_bug.cgi?id=743407
It had no effect since quite some time and also is not needed in general,
especially not to switch between immediate feedback mode and early feedback
mode. The latest understanding of the RFC is that from the endpoint point of
view, both modes are exactly the same. RTCP is only allowed to use the
bandwidth as given by the RFC constraints, as such it is only ever possible
to schedule a RTCP packet early but it's against the RFC to schedule more RTCP
packets.
The difference between immediate feedback mode and early feedback mode is that
the former guarantees that an RTCP packet can be sent for every event
"immediately", which means that the bandwidth calculations from the RFC have
resulted in an RTCP scheduling interval that is small enough. Early feedback
mode on the other hand means that we can schedule some packets early to make
that happen, but it's not guaranteed at all that it's possible to schedule
an RTCP packet per event (i.e. they need to be accumulated or dropped).
This indicates with a boolean return value if scheduling a new RTCP packet
within the requested delay was possible. Otherwise it behaves exactly like
send-rtcp. The only reason for adding a new signal is ABI compatibility.
No matter if gst_matroska_read_common_parse_index_cuetrack () returns that the
flow is OK or not, the check there will be a break from the switch. Removing the
check since the outcome is the same.
CID #1265762
Bringing back the check removed in the previous commit but have that check be a
g_assert. Changing the function to static void since return can never be False,
because audio format will never be unkown.
func_index is set by the sum of three ternary operators which add, 0:4, 0:2,
and 1:0. Minimum value would be 0+0+0=0, and maximum would be 4+2+1=7.
The conditional checking if func_index is >= 0 and < 8 will always be true.
Removing it.
CID 1226442
We (currently?) can't really handle gaps between RTP packets if they're not
properly timestamped. The current code would go into calculations with
GST_CLOCK_TIME_NONE and then cause assertions everywhere. It's probably
better to error out cleanly instead.
We set to PLAYING after we have configured the caps, otherwise we
might end up calling request_key (with SRTP) while caps are still
being configured, ending in a crash.
https://bugzilla.gnome.org/show_bug.cgi?id=740505
Actually copy the codec data instead of copying nothing
and then bombing out because there's no data.
Fixes: gst-launch-1.0 audiotestsrc ! avenc_alac ! qtmux ! fakesink
https://bugzilla.gnome.org/show_bug.cgi?id=741783
Apparently linphone sends an invalid RTP packet as very
first packet. We want to ignore that instead of erroring
out (same for any other invalid packets really).
https://bugzilla.gnome.org/show_bug.cgi?id=741398
Instead of constantly querying upstream, just cache the last duration,
and in the unlikelyness we might have gone over query again before
deciding we are EOS.
Cut 15% cpu off matroskademux streaming thread (srsly...)
This is meant to be so (https://wiki.xiph.org/MatroskaOpus - while
it is marked as a draft, this part was confirmed to be correct on
IRC), and allows one to determine whether a demuxed stream is
multistream or not, and thus set the multistream caps field
accordingly. In turn, this means downstream does not have to guess.
https://bugzilla.gnome.org/show_bug.cgi?id=740744
It's like rendering a buffer list, just with one buffer.
Has the added advantage that if there are multiple clients
we can send the buffer to all the clients in one go.
We unlock and re-lock the client lock while emitting the
removed signal, which causes inconsistencies in the client
list vs. the client counts. Instead, remove the client from
the list already before emitting the signal and put it into
a temporary list of clients to be removed. That way things
look consistent to the streaming thread, but signal callbacks
can still do things like get stats from removed clients.
Add prototype for a render_list() function that can use a
sendmmsg-style g_socket_send_messages() function once it lands
in GLib. We can use this infrastructure to send multiple buffers
made up by multiple memories to multiple clients in one go, which
drastically reduces the number of syscalls made when sending
high-bitrate video streams.
https://bugzilla.gnome.org/show_bug.cgi?id=732152
Use the refcount for memory management and keep track
of the number of duplicate clients in a separate
variable. This will be useful later, and means we
don't have to hold the OBJECT_LOCK all the time.
https://bugzilla.gnome.org/show_bug.cgi?id=732866
Since "basetransform: Fix caps equality check" commit a7f357,
set_info() will not be called anymore if crop didn't change
the caps. This is fixed by setting "need_update" boolean when
cropping properties has been changed, and then applying these
if they where not applied before rendering the next frame. This
patch also fixed the locking, dropping un-needed custom lock,
and no holding needless lock while doing the operation as we
already hold the streaming lock.
https://bugzilla.gnome.org/show_bug.cgi?id=740787
In some cases the currently set GstVideoInfo is not interlaced, but
upstream caps are interlaced and the info is passed in the filter,
we should take that info into account and make sure that we do not
consider that case as a "pass through" case.
https://bugzilla.gnome.org/show_bug.cgi?id=741407
A race condition in the state change function may cause buffers
to be unreffed while they are still used by the streaming thread
in gst_rtp_h264_pay_send_sps_pps() resulting in a crash. Chain
up to the parent class first in the state change function to
make sure streaming has stopped and only then free those buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=741381
When dealing with fragmented files, we will get more accurate duration
information via the mfra and moof atoms.
In order for playback to not stop at the initial duration (from the
moov atom), we need to check and update the various duration variables
when we find more information.
Fixes playback of fragmented files in pull mode
Adds a new set of properties to make pushfilesrc output a TIME SEGMENT
(instead of the filesrc BYTE SEGMENT).
When time-segment is set to True the following will happen:
* Seeks are refused (data starts from the beginning of the file)
* The BYTE segment will be replaced by a TIME segment with the values
specified in the various properties
* The first outgoing buffer will have a timestamp set on it (by default
it has a value of GST_CLOCK_TIME_NONE)
When seeking or finding the previous keyframe, do
comparisons against targets and segments using composition time
to correctly decide which sample times match.
We used to setup an iterator with 1 GValue set with a NULL object
pointer which is not the normal way to do that. Instead we should make
sure that the first call to gst_iterator_next returns GST_ITERATOR_DONE.
Currently during header parsing, we scan through the entire file
and skip every moof+mdat chunk for fragmented mp4s, which makes
start-up incredibly slow. Instead, just stop at the first moof
chunk when have a moov, and start exposing the streams, so we
can go and start handling the moofs for real.
When an caps-event is received, we must immediately change the crop
to videocrop correctly changed caps-event dimension, otherwise the
videocrop will first use the previous value of the crop that when
resizing video to a smaller resolution may cause an error.
https://bugzilla.gnome.org/show_bug.cgi?id=740671
Empty segments in an edit list have a media_start time of -1,
as they don't actually play any media. Allow for that when
aligning to the reference stream in reverse play.
Put a 0-byte at the end of the event string. Does not break ABI because
old depayloaders will skip the 0 byte (which is included in the length).
Expect a 0-byte at the end of the event string or a ; for old
payloaders.
See https://bugzilla.gnome.org/show_bug.cgi?id=737591
Both Firefox and Chrome uses VP8 as the encoding in their SDP.
Adding this now defacto standard name removes the need for special
case in SDP parsing code.
https://bugzilla.gnome.org/show_bug.cgi?id=737810
Add fixed payload type for mp2t to template caps as well, so
our output caps match the advertised default pt. Fixes a
regression from 1.2.
There's still something wrong with caps negotiation though,
rtpmp2tpay payload=96 ! fakesink will not output caps with
payload=96.
Fixes crash in audiotestsrc because of an unsupported format
getting negotiated on big-endian systems with
audiotestsrc ! interleave ! audioconvert ! wavenc
When the RTT and jitter are very low (such as on a local network), the
calculated retransmission timeout is very small. Set some sensible lower
boundary to the timeout by adding a new property. We use the packet
spacing as a lower boundary by default.
In early retransmission we are allowed to schedule 1 regular RTCP packet
at an earlier time. When we do that, we need to set allow_early to FALSE
and ignore/drop (or merge) all future requests for early transmission.
We now first check if we can schedule an early RTCP and if we can,
actually prepare the data for the next RTCP interval.
After we send the next regular RTCP after the early RTCP, we set
allow_early to TRUE again to allow more early requests.
Remove the condition for the immediate feedback for now.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=738319
Add a need-resync state, this is when we need to try to lock on to a
time/RTPtime pair.
Always check the RTP timestamps and if they go backwards, mark ourselves
as need-resync.
Only resync when need-resync is TRUE and we have a valid time. Otherwise
we keep the old values. This avoids locking on to an invalid time and
causing us to timestamp everything with -1.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=730417
rtpmux behaves like a funnel in that it forwards whatever upstream is
sending buffers. So setting proxy caps doesn't make sense as the
upstream don't have to have compatible caps, thus resulting in an empty
caps set as a result of a caps query. Instead set fixed caps just
as funnel does.
https://bugzilla.gnome.org/show_bug.cgi?id=738722
