The pool is stopped when all the buffers have been released. Deallocate
when stopping so we are sure that the buffers aren't still used by
another element.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
This is no longer needed since we implemented close() vfuncs as the
encoder/decoder base class already take care of calling close() (which
is calling shutdown()) in its own change_state implementation.
We also move the shut down of the component from PAUSED_TO_READY to READY_TO_NULL.
By doing so upstream will have already deactivated the pool from the
encoder and so won't be preventing the OMX state change as the buffers
will all be released.
https://bugzilla.gnome.org/show_bug.cgi?id=796918
Increase the number of output buffers by the number of buffers requested
downstream.
Prevent buffers starvation if downstream is going to use dynamic buffer
mode on its input.
https://bugzilla.gnome.org/show_bug.cgi?id=795746
Tell upstream about how many buffer we plan to use so they can adjust
their own number of buffers accordingly if needed.
Same logic as the existing gst_omx_video_enc_propose_allocation().
https://bugzilla.gnome.org/show_bug.cgi?id=795746
If for some reason something goes wrong and we stop the streaming loop
we may end up with other threads still waiting on the drain cond.
No more buffers will be produced by the component so they were waiting
forever.
Fix this by always signalling this cond when stopping the streaming
loop.
https://bugzilla.gnome.org/show_bug.cgi?id=796207
The OMX specs states that the nBufferCountActual of a port has to default
to its nBufferCountMin. If we don't change nBufferCountActual we purely rely
on this default. But in some cases, OMX may change nBufferCountMin before we
allocate buffers. Like for example when configuring the input ports with the
actual format, it may decrease the number of minimal buffers required.
This method checks this and update nBufferCountActual if needed so we'll use
less buffers than the worst case in such scenarios.
SetParameter() needs to be called when the port is either disabled or
the component in the Loaded state.
Don't do this for the decoder output as
gst_omx_video_dec_allocate_output_buffers() already check
nBufferCountMin when computing the number of output buffers.
On some platform, like rpi, the default nBufferCountActual is much
higher than nBufferCountMin so only enable this using a specific gst-omx
hack.
https://bugzilla.gnome.org/show_bug.cgi?id=791211
Setting the input format and the associated encoder/decoder settings
may also affect the nBufferCountMin of the input port.
Refresh the input port so we'll use up to date values in propose/decide
allocation.
https://bugzilla.gnome.org/show_bug.cgi?id=796445
- Report the error from OMX if any (OMX_EventError)
- If not report the failing to the application (GST_ELEMENT_ERROR)
- return GST_FLOW_ERROR rather than FALSE
- don't leak @frame
https://bugzilla.gnome.org/show_bug.cgi?id=795352
This hack tries to pass as much information as possible from caps to the
decoder before it receives any buffer. These information can be used by
the OMX decoder to, for example, pre-allocate its internal buffers
before starting to decode and so reduce its initial latency.
This mechanism is currently supported by the zynqultrascaleplus decoder.
https://bugzilla.gnome.org/show_bug.cgi?id=792040
If less than 1%.
The dynamic format change should not happen when the
resolution does not change and when only the framerate
changes but very slightly, i.e. from 50000/1677=29.81
to 89/3=29.66 so a "percentage change" of less than 1%
(i.e. 100*(29.81-29.66)/29.66 = 0.50 < 1 ). In that case
just ignore it to avoid unnecessary renegotiation.
https://bugzilla.gnome.org/show_bug.cgi?id=759043
Some live streams can set the framerate to 50000/1677 (=29.81).
GstVideoInfo.fps_n << 16 is wrong if the fps_n is 50000
(i.e. greater than 32767).
https://bugzilla.gnome.org/show_bug.cgi?id=759043
The usual pattern when setting OMX params is to first get the struct
param, override the values we want to set and then set the updated
param.
We were not doing this with OMX_IndexParamVideoPortFormat and so were
resetting some fields such as OMX_VIDEO_PARAM_PORTFORMATTYPE.xFramerate
https://bugzilla.gnome.org/show_bug.cgi?id=790979
Partially revert 1b7d0b8:
omxvideodec: handle IL 1.2 behavior for OMX_SetParameter
It turned out it was a problem in the decoder which was
not updating some local variables upon SetParameter.
https://bugzilla.gnome.org/show_bug.cgi?id=783976
For the history, the parallel disable port has been introduced by:
"00be69f omxvideodec: Disable output port when setting a new format"
and then replicated to videoenc, audiodec and audioenc.
This is only required to do 'parallel' if buffers are shared between ports.
But for decoders and encoders the input and output buffer are of different
nature by definition (bitstream vs images). So they cannot be shared.
Also starting from IL 1.2.0 it is written in the spec that the parallel
disable is not allowed and will return an error. Except when buffers are
shared.
Again here we know in advance that they are not shared so let's always
do a sequential disable.
Tested on Desktop, rpi and zynqultrascaleplus.
https://bugzilla.gnome.org/show_bug.cgi?id=786348
The OMX specification doesn't provide any API to expose the latency
introduced by encoders and decoders. We implemented this as a custom
extension as declaring the latency is needed for live pipelines like
video conferencing.
https://bugzilla.gnome.org/show_bug.cgi?id=785125
Allocating OMX components buffers in set_format() is too early.
Doing it when receiving the first buffers will allow the element to use
the information from the allocation query and/or the first incoming
buffer to pick to best allocation mode.
Tested on raspberry pi with dynamic resolution changes on decoder and
encoder input.
https://bugzilla.gnome.org/show_bug.cgi?id=785967
No semantic change, just factor out the code enabling and disabling the
component to their own functions.
Makes the code easier to read as the set_format() method was already
pretty big. Will also allow us to easily change the enabling logic.
https://bugzilla.gnome.org/show_bug.cgi?id=785967
Will be easier to maintain and to make enhancements.
Tested with Tizonia on Desktop.
Also tested with Bellagio to make sure it does not crash when
calling OMX_UseEGLImage and indeed it returns NotImplemented.
Then gst-omx fallback to OMX_UseBuffer if it can and so on.
Also tested on rpi to make sure there is no regression.
https://bugzilla.gnome.org/show_bug.cgi?id=784365
On segment seek, unlike EOS, we drain, but we cannot expect a flush
later to reset the decoder state. As a side effect, the decoder would
remain in EOS state and ignore any new incoming buffers.
To fix this, we call _flush() inside the _drain() function, and
_finish() becomes what _drain() was before. This way, for _finish() (the
eos case) we only drain, for _drain() triggered by segment seek or new
caps, we also reset the decoder state so it's ready to accept buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=785237
The zynqultrascaleplus OMX implementation has a custom extension
allowing decoders to output dmabuf and so avoid buffers copy between OMX
and GStreamer.
Make use of this extension when built on the zynqultrascaleplus. The
buffer pool code should be re-usable for other platforms as well.
https://bugzilla.gnome.org/show_bug.cgi?id=784847
It triggers SettingsChanged on the other port and it is up to
the client to decide if it should lead to a port reconfiguration.
Settings are propagated to the other port for fields they have
in common. But this event is only triggered on the other port
if it actually change a setting.
https://bugzilla.gnome.org/show_bug.cgi?id=783976
Can happen if gst_buffer_pool_acquire_buffer succeeds but
gst_buffer_n_memory (buffer) is not exactly 1.
In theory this should not happen because the decoder requests
EGLImage(RGBA) but better to fix any leak on corner cases.
https://bugzilla.gnome.org/show_bug.cgi?id=784365
For example this allows the omx decoder to directly fill the
pixmaps coming from the video sink.
It only avoids a buffer copy when the decoder uses a pool provided
by a downstream element. So let's restrict this usage to situations
where the decoder decides to use a downstream buffer pool.
Tested with Tizonia/OMX.Aratelia.video_decoder.vp8
and with Bellagio/OMX.mesa.video_decoder.avc.
If it fails to setup buffers with OMX_UseBuffer the decoders
fallbacks to usual OMX_AllocateBuffer.
Also it allows to test on desktop the GstOMXBufferPool->other_pool
management which was previously only used in the OMX_UseEGLImage
case, i.e. on Rpi.
https://bugzilla.gnome.org/show_bug.cgi?id=784069
gst_omx_video_dec_open will only update GstOMXVideoDec->port->port_def.
Note that the component is reopen only if the flag
GST_OMX_HACK_NO_COMPONENT_RECONFIGURE is set.
https://bugzilla.gnome.org/show_bug.cgi?id=782418
Ensure that enough buffers are allocated by adding up component's own
minimal plus the number of buffers requested by downstream.
This should prevent buffers starvation problem if downstream elements
are holding some of the buffers they required.
Also simplify the check on the maximum on buffers. What we actually care
about is to make sure the pool can hold the minimum of required buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=784479
GST_VIDEO_FRAME_PLANE_STRIDE() should be used to get the actual buffer stride,
as reported in the buffers's GstVideoMeta, when copying data to that buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=768173
