Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstmessage.c: (gst_message_new_async_start),
(gst_message_new_async_done), (gst_message_parse_info),
(gst_message_parse_async_start):
* gst/gstmessage.h:
Add ASYNC_START and ASYNC_DONE messages to prepare for latency
support.
Original commit message from CVS:
* tools/gst-inspect.c:
(print_plugin_automatic_install_info_codecs):
Now that we don't check for the 'Codec' keyword any longer in the
klass, we shouldn't spew a warning if the klass isn't a decoder or
encoder (since it might be a Source/Network, for example).
Original commit message from CVS:
* tools/gst-inspect.c:
(print_plugin_automatic_install_info_codecs):
Don't require decoder/demuxer/depayloader elements or
encoder/muxer/paylader elements to have 'Codec' as part of their
factory class string when introspecting a plugin's capabilities.
draft-klass.txt mentions that it might be removed in future, and
flump3dec doesn't have it as part of its class string, so chances
are others might also not have it.
Original commit message from CVS:
* gst/gstchildproxy.c: (gst_child_proxy_get_property),
(gst_child_proxy_set_property):
Invert precondition check to be alike the ones in the mimiced gobject
api.
Original commit message from CVS:
* docs/design/draft-tagreading.txt:
* docs/random/ensonic/audiobaseclasses.txt:
Do some Architect work.
* gst/gstobject.c: (gst_object_set_name):
Add a WARNING.
* gst/gstpad.c:
Add docs that point from gst_pad_get_range to gst_pad_pull_range
Original commit message from CVS:
* gst/gstsystemclock.c: (gst_system_clock_init),
(gst_system_clock_start_async), (gst_system_clock_id_wait_async):
Defer starting the async system clock thread until the first async
wait is scheduled. Fixes#414986.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_multi_queue_finalize),
(gst_single_queue_free):
Fix small leak (free GstSingleQueue structure too, not only contents).
Original commit message from CVS:
* gst/gstbin.c:(gst_bin_add):
Use GST_STR_NULL to prevent NULL pointer to be passed to GST_CAT_DEBUG.
* win32/common/libgstbase.def:
* win32/common/libgstreamer.def:
Add new exported functions.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_class_init),
(gst_identity_init), (gst_identity_check_perfect),
(gst_identity_check_imperfect_timestamp),
(gst_identity_check_imperfect_offset), (gst_identity_transform_ip),
(gst_identity_set_property), (gst_identity_get_property):
* plugins/elements/gstidentity.h:
Separate out check-imperfect-timestamp and check-imperfect-offset.
Put back check-perfect as it was to keep compatibility.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_dispose):
There's no need to warn if VOID_PENDING is not NONE here, as
long as the state is NULL it's ok, and that's checked immediately
above.
Original commit message from CVS:
2007-03-08 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Fix check for perfect stream to ignore buffers with -1
offsets/offset ends when checking data contiguity.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_activate):
* libs/gst/base/gstbasetransform.h:
Add support for dropping buffers with custom GstFlowReturn.
Set DISCONT flags on outgoing buffers based on QoS, incomming DISCONT
buffers or dropped buffers.
* docs/libs/gstreamer-libs-sections.txt:
docs for new custom return code.
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Use drop support in base class to implement drop-probability.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Only post bus message at max, once per buffer received.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Rename non-perfect to imperfect for Mike and for the sanctity of
the language.
Also make sure bus message gets emitted for data-incontiguities.
Original commit message from CVS:
2007-03-07 Zaheer Abbas Merali <zaheerabbas at merali dot org>
* plugins/elements/gstidentity.c: (gst_identity_check_perfect),
(gst_identity_start):
* plugins/elements/gstidentity.h:
Emit bus message if check-perfect is true and we encounter a
non-perfect stream between 2 consecutive buffers.
Fixes#415394.
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_transform_object_string),
(_gst_value_initialize):
Implement GstObject -> string transform so we print object names
when serializing GValues containing GstObjects.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_message_full),
(gst_element_set_locked_state), (gst_element_get_state_func),
(gst_element_change_state):
Handle INFO messages from the GST_ELEMENT_INFO macro as well.
Documentation updates.
Small code cleanups.
* gst/gstmessage.c: (gst_message_new_info),
(gst_message_parse_info):
* gst/gstmessage.h:
API: gst_message_new_info()
API: gst_message_parse_info()
Add INFO message create and parse code.
Original commit message from CVS:
* gst/gstbin.c: (bin_query_min_max_init), (bin_query_latency_fold),
(bin_query_latency_done):
Also report the live parameter of a latency query.
Original commit message from CVS:
* tests/check/generic/states.c: (GST_START_TEST), (states_suite):
Copy the current generic/states example from -base and adapt so
we can use the exact same code everywhere.
Check a STATES_IGNORE_ELEMENTS env var which can be used
to ignore certain element factories for this test, which is
what is being done in -base
* tests/check/Makefile.am:
Mention this environment variable.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstbus.c: (gst_bus_init), (gst_bus_dispose), (gst_bus_post),
(gst_bus_timed_pop), (gst_bus_pop):
* gst/gstbus.h:
API: gst_bus_timed_pop()
Implement gst_bus_timed_pop() to do a blocking timed wait for a
message to arrive on the bus.
* tests/check/gst/gstbus.c: (GST_START_TEST), (pop_thread),
(gst_bus_suite):
Two unit tests for new _timed_pop() function.
Original commit message from CVS:
* gst/gstpipeline.c: (gst_pipeline_change_state),
(gst_pipeline_provide_clock_func), (gst_pipeline_set_delay):
Don't ref a NULL clock in _provide_clock_func().
Don't allow an INVALID delay.
Don't try to calculate base_time with an invalid start_time.
Also distribute and notify a NULL clock when it was selected.
* tools/gst-launch.c: (event_loop):
Don't crash when a NULL clock was selected in the pipeline.
Original commit message from CVS:
* docs/design/Makefile.am:
* docs/design/draft-missing-plugins.txt:
* docs/random/draft-missing-plugins.txt:
Some small updates: update plugin system identifier prefix
('gstreamer.net' to 'gstreamer'), mention our new install
API in libgstbaseutils rather than libgimme-codec, add
reference to the online docs.
Original commit message from CVS:
* win32/common/config.h:
Pretty sure Bill never made a powerpc version. Powerpc hackers,
use moap cl ci to only check in what is mentioned in the ChangeLog.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstelement.h:
Fix up documentation to link to the correct GstGError section.
Add GST_ELEMENT_INFO macro since someone else added a Info message.
Original commit message from CVS:
* tools/gst-launch.c: (event_loop):
Make sure that we actually show the important message part of a
warning message.
No need to check if the gerror is not NULL to free; first of all
g_free accepts NULL; and second the default error handler would
segfault if gerror was NULL.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
* gst/gstghostpad.c: (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full):
Make the ghostpad a parent of the internal pad again for better backward
compatibility. Don't write code that relies on this however.
* gst/gstpad.c: (gst_pad_activate_pull), (gst_pad_activate_push),
(gst_pad_link_check_hierarchy):
Require that parents should be GstElements in the hierarchy check.
Original commit message from CVS:
* docs/design/part-gstghostpad.txt:
* gst/gstghostpad.c: (gst_ghost_pad_class_init),
(gst_ghost_pad_internal_do_activate_push),
(gst_ghost_pad_internal_do_activate_pull),
(gst_ghost_pad_do_activate_push), (gst_ghost_pad_do_activate_pull),
(gst_ghost_pad_do_link), (gst_ghost_pad_dispose),
(gst_ghost_pad_new_full), (gst_ghost_pad_set_target):
Do not set the internal pad as a parent anymore so we can avoid
hierarchy linking errors when the ghostpad has no parent yet. This also
fixes failed activation because of unlinked internal pads, which in
turn fixes the impossible case where you have to activate a pad before
you can add it to a running element.
Also fix the docs.
* gst/gstpad.c: (pre_activate), (post_activate),
(gst_pad_set_active), (gst_pad_activate_pull),
(gst_pad_activate_push), (gst_pad_check_pull_range):
Add some more debug info.
Mark activation mode in pre_activate so that we don't try to activate in
endless loops. Fixes#385084.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_check_get_range):
Implement a checkgetrange function instead of relying on the default
core behaviour that assumes we can operate in pull mode if we have a
getrange function. First step at fixing #385084.
Original commit message from CVS:
* gst/gstchildproxy.h:
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasetransform.h:
More docs coverage and some ChangeLog surgery (add missing names)
Original commit message from CVS:
* gst/gstpad.c: (gst_pad_get_internal_links_default),
(gst_pad_dispatcher):
Improve debugging of default pad dispatcher and query functions.
Original commit message from CVS:
* docs/design/part-seeking.txt:
Some small update.
* gst/gstsegment.c: (gst_segment_set_seek):
Revert old bogus change that should make seeking work again.
Original commit message from CVS:
* docs/random/ensonic/dynlink.txt:
* docs/random/ensonic/interfaces.txt:
* docs/random/ensonic/receipies.txt:
Possible dynamic reconnection api, plus some type fixes the other two
docs.
Original commit message from CVS:
* plugins/elements/gstfilesink.c: (gst_file_sink_uri_set_uri):
* plugins/elements/gstfilesrc.c: (gst_file_src_uri_set_uri):
Also check for an absolute path following file:// in the filesrc
element. Remove redundant check and call g_path_is_absolute() on the
unescaped location.
Original commit message from CVS:
* docs/design/draft-klass.txt:
Add existing category analysis.
* gst/gstcaps.c:
Fix doc example, framerate is a fraction.
Original commit message from CVS:
* docs/design/draft-latency.txt:
Small update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_latency), (gst_base_sink_query_latency),
(gst_base_sink_wait_clock), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_queue_object_unlocked),
(gst_base_sink_chain_unlocked), (gst_base_sink_send_event),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
API: gst_base_sink_query_latency() to let subclasses query the upstream
latency.
API: gst_base_sink_get_latency() to let subclasses query the configured
latency in the sink.
Implement query and set latency.
Update some docs.
As spotted by Will Newton <will dot newton at gmail dot com>: Make sure we
don't continue preroll when we are flushing. Fixes#405284.
* tests/check/pipelines/stress.c: (change_state_timeout),
(quit_timeout), (GST_START_TEST), (stress_suite):
Test for #405284.
Original commit message from CVS:
* gst/gstbin.h:(gst_bin_get_by_interface),
(gst_bin_iterate_all_by_interface):
Replace interface parameter name by iface as interface is
a reserved keyword in Visual Studio for C++ projects so it removes
a build error for application developpers using VS.
* plugins/elements/gstfilesrc.c:(gst_file_src_uri_set_uri):
Fix a bug on Windows in uri format check. Now the prefix checked
is file:// and next we check if the path after file:// is absolute.
* win32/common/libgstbase.def:
* win32/common/libgstdataprotocol.def:
* win32/common/libgstgstreamer.def:
Add new exported functions.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c
(simple_launch_lines_suite, test_tee): Disable tee test until I
have time to fix it :-(
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/Makefile.am (noinst_HEADERS):
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_ppc32.h: Add ABI checks for PPC32.
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_ppc32.h: Add ABI checks for PPC32.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* tests/check/pipelines/simple-launch-lines.c (test_tee): Add
tests for push and pull tee behavior.
* plugins/elements/gsttee.h:
* plugins/elements/gsttee.c: Describe has-sink-loop better, and
mark as deprecated as well as unimplemented. It was a crack idea.
Add support for tee operating in pull mode, off by default.
Original commit message from CVS:
2007-02-09 Andy Wingo <wingo@pobox.com>
* gst/gstregistryxml.c (load_feature, load_plugin): Drop some
normal-case logs down to LOG, raise errors to WARNING.
(gst_registry_xml_read_cache): Don't log before calling a function
that logs.
* gst/gstregistry.c (gst_registry_finalize): Less debug on program
exit (registry finalize).
(gst_registry_add_plugin, gst_registry_add_feature): No need for a
DEBUG log when we emit signals that people don't even have the
chance to connect to.
(gst_registry_scan_path_level): Less logging in the normal case.
Original commit message from CVS:
Patch by: Michal Benes <michal dot benes at itonis dot tv>
* plugins/elements/gstfilesrc.c: (gst_file_src_create_read):
Correctly generate EOS for non-seekable files. We don't have a total
length for them and would get an unexpected end of file if we only
special-cased for regular files. (Fixes: #404569)
Original commit message from CVS:
* tests/check/elements/filesrc.c: (GST_START_TEST),
(filesrc_suite):
Add unit test for the GstURIHandler interface in filesrc. This also
tests the newly added file://localhost/foo/bar support.
Original commit message from CVS:
* gst/gstelementfactory.h:
The klass string is not a hierarchy. Add reference to the design doc
for more information and common types.
Original commit message from CVS:
* docs/design/draft-latency.txt:
Slight redesign to allow for dynamic latency adjustments.
* docs/design/part-negotiation.txt:
Fix some typos.
Original commit message from CVS:
reviewed by: Wim Taymans <wim@fluendo.com>
* plugins/elements/gstfilesink.c: (gst_file_sink_uri_set_uri):
* plugins/elements/gstfilesrc.c: (gst_file_src_uri_set_uri):
Allow file://localhost/foo/bar URLs and correctly fail for every other
hostname that one sets. This was gnomevfssrc is linked for those if
installed as it can handle it (#403172)
Original commit message from CVS:
reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
Don't put the previously added destroy notify in the GstCollectData
struct as all it's padding is already used and we don't want to break
ABI. Instead put in the pad's GObject data for now. This should be
cleaned up for 0.11 (#402393).
Original commit message from CVS:
reviewed by: Wim Taymans <wim@fluendo.com>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad),
(gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
API: Add function to specify a destroy notification for custom
GstCollectData when adding new pads in GstCollectPads (#402393).
Original commit message from CVS:
* plugins/elements/gsttypefindelement.c:
(gst_type_find_element_chain_do_typefinding),
(gst_type_find_element_change_state):
Don't leak found caps in chain function (no idea why that never
showed up as a leak anywhere).
Original commit message from CVS:
* docs/gst/gstreamer.types.in:
* gst/gstregistry.c: (gst_registry_class_init):
Document registry signals and make gtk-doc pick them up (#401381).
Original commit message from CVS:
* docs/pwg/building-testapp.xml:
Add some audioconverts and audioresample to the pipeline, and some
more comments and error handling.
Original commit message from CVS:
Patch by: Jindrich Makovicka <jindrich.makovick at itonis dot tv>
* plugins/elements/gstfilesrc.c: (gst_file_src_start):
If not using mmap'ed files try to seek to the end instead of the
start to determine whether we can seek at all. This fixes the case
of 2GB+ files over NFS, where seeks in the first 2GB can succeed but
seeks for everything afterwards fail. Fixes#400656
Original commit message from CVS:
* gst/gstcaps.c: (_gst_caps_free), (gst_static_caps_get):
Add some refcount debugging.
Make gst_static_caps_get threadsafe, which is needed when autoplugging
in multiple streaming threads.
Original commit message from CVS:
Patch by: David Schleef <ds at schleef dot org>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstadapter.c: (gst_adapter_copy):
* libs/gst/base/gstadapter.h:
API: gst_adapter_copy() that can reduce the amount of memcpy when
getting data from the adapter. Fixes#388201.
Original commit message from CVS:
* gst/gstregistrybinary.c: (gst_registry_binary_read_cache):
In print statements, "%x" is for guint. Fixes build on macosx.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c:
(gst_multi_queue_loop):
Small fix.
(single_queue_overrun_cb), (single_queue_underrun_cb),
(single_queue_check_full), (gst_single_queue_new):
Implement single queue growth system.
This uses the extra-size properties, and will grow single queues by
that much if one goes full whereas there are others empty. This is
called extra-mode in the code.
When a single queue's levels go back below the initial max-size
limits, it is no longer in extra-mode. This is to ensure we don't
consume too much memory.
Fixes#399875
Original commit message from CVS:
* gst/gst.c: (gst_init_get_option_group):
Make warning about late g_thread_init() calls a bit more explicit,
so that it's more obvious to application developers what they need
to do if a user files a bug against their application.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c:
(gst_multi_queue_src_activate_push), (gst_single_queue_new):
Remove previous hack of unsetting the flushing flag for the source pad
instead of activating it. Instead, fix the source pad activate function
so that it no longer depends on having a parent set or not.
Original commit message from CVS:
Patch by: Carlos Sanmartin Dominguez <csanmartin@igalia.com>
* docs/manual/basics-bus.xml:
Fix example code, gst_element_unref() doesn't exist any longer.
Original commit message from CVS:
* docs/faq/gst-uninstalled:
Add gst-plugins-base/gst/utils/ to LD_LIBRARY_PATH so that plugins
depending on libgstbaseutils can work in uninstalled environment.
Original commit message from CVS:
* gst/gsttaglist.h:
* gst/gsttagsetter.c:
Add more docs regarding tag merge-modes and when to send tags. Fix 'since'
statement for new tag.
Original commit message from CVS:
* plugins/elements/gstmultiqueue.c: (gst_single_queue_new):
When dynamically creating single queues, activate sinkpad before adding
it.
We should be doing the same thing for the source pad, but we can't
since it would call a method which needs the parent to be set in order
to work propertly. Instead of activating the source pad, we just unset
the flushing flag, which is the minimal requirement for adding a pad
to an element in a state greater than READY.
Original commit message from CVS:
* tests/check/gst/gstabi.c:
* tests/check/gst/struct_hppa.h:
* tests/check/libs/libsabi.c:
* tests/check/libs/struct_hppa.h:
Add ABI structs for HPPA (see #393796).
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_abi_list):
Actually write ABI structs to the file specified in the GST_ABI
environment variable, as the message we print claims we would.
Original commit message from CVS:
* gst/gsttaglist.c: (_gst_tag_initialize):
Change tag type from STRING to DOUBLE. Apply ChangeLog surgery for my
previous two entries.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gsttaglist.c: (_gst_tag_initialize):
* gst/gsttaglist.h:
add tag support for beat-per-minute
Original commit message from CVS:
2007-01-13 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_get_range, gst_pad_pull_range): Allow
getrange() to return buffers with other caps, while we fix
demuxers and typefind, or otherwise change part-negotiation.txt.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (gst_base_transform_activate):
Factor start/stop into this private function instead of partially
in activate functions and partially in the change_state function.
Fixes setup before the element has changed from READY->PAUSED, as
is the case in pull-mode pipelines.
(gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull): Refactor to use
gst_base_transform_activate().
(gst_base_transform_change_state): Removed, not needed any more.
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Truncate before fixating.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Don't set_caps() if the result of fixating is ANY, as it's not
supported, and not necessary in the case of a link with no
template caps on either side. Fixes tests/check/libs/basesrc in
some pull-mode tests.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (_GstBaseTransformPrivate):
(gst_base_transform_init, gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull):
Track the activation mode.
(gst_base_transform_setcaps): In pull mode, when activating the
src pad, after activating the sink pad, activate the sink pad's
peer, as discussed in part-negotiation.txt.
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasesrc.c (gst_base_src_fixate): Add fixate
vmethod, as in basesink.
* libs/gst/base/gstbasesink.h: Reformat docs, add fixate vmethod.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_setcaps): In pull
mode, first proxy the setcaps to the peer pad.
(gst_base_sink_pad_fixate): Add a fixate function that calls the
new fixate vmethod.
(gst_base_sink_default_activate_pull): Rename from
gst_base_sink_activate_pull.
(gst_base_sink_negotiate_pull): New function, performs negotiation
in pull mode before calling ::activate_pull().
(gst_base_sink_pad_activate_pull): Actually call the activate_pull
vmethod instead of the default implementation. I have no idea how
this worked before. Negotiate before calling activate_pull.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_activate_pull): Refuse to activate unlinked
sink pads in pull mode. In addition to being correct, fixes
filesrc ! decodebin ! identity ! fakesink.
(gst_pad_get_range, gst_pad_pull_range): Don't call
gst_pad_set_caps() if the caps changes; instead error out with
GST_FLOW_NOT_NEGOTIATED, as discussed in part-negotiation.txt.
Original commit message from CVS:
* libs/gst/check/gstbufferstraw.h:
* libs/gst/check/gstcheck.h:
Add G_BEGIN_DECLS and G_END_DECLS. Move GST_CHECK_MAIN where it
belongs.
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* gst/gsttagsetter.c: (gst_tag_setter_merge_tags):
gst_tag_list_merge() returns a new list, so it's not the best idea
to ingore its return value. Effectively meant that tags could only
be merged on a GstTagSetter once using _merge_tags(). Fixes#395554.
Also add function guard to require a non-NULL taglist as input (has
always been so due to gst_tag_list_copy(), just making it explicit).
Original commit message from CVS:
* docs/random/draft-missing-plugins.txt:
Some additions: mention new API that is supposed to be used at the
various stages; short blob about new gst-inspect introspection
option; mention potential future problem with plugins that have
a dynamic list of elements (such as ladspa, pitfdll, libvisual).
Original commit message from CVS:
* tools/gst-inspect.c:
(print_plugin_automatic_install_info_codecs),
(print_plugin_automatic_install_info_protocols),
(print_plugin_automatic_install_info), (main):
Add --print-plugin-auto-install-info option to gst-inspect, so we can
introspect plugin files and get machine-parsable output that corresponds
to the last bit of the missing-plugin installer string (small gotcha:
doesn't take into account ranks).
Original commit message from CVS:
2007-01-10 Andy Wingo <wingo@pobox.com>
* docs/design/part-negotiation.txt: Update with, um, one way that
pull-mode negotiation might work?
* gst/gstpad.h:
* gst/gstpad.c (gst_pad_get_allowed_caps): Remove the restriction
that the pad must be a src pad; makes sense to call it the other
way in pull mode, and the logic is symmetric anyway.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
unref data at the end when we are done with the pad.
Original commit message from CVS:
* gst/gstregistry.c: (gst_registry_scan_path_level):
Plugin extension on HP-UX is .sl, add that to the list of approved
plugin extensions (see #393796).
* tests/check/gst/gstpad.c: (GST_START_TEST):
ulong => gulong. Fixes compilation with HP-UX compiler.
* tests/check/pipelines/parse-launch.c: (GST_START_TEST):
Fix compilation if valgrind headers are not available.
Original commit message from CVS:
* win32/common/libgstreamer.def:
Add new exported function.
* win32/vs6/libgstbase.dsp:
Add gstdataqueue.c to the build.
* win32/vs6/libgstcoreelements.dsp:
Add gstmultiqueue.c to the build.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.h: New GstBaseSinkClass vmethod,
activate_pull(), providing for a way to specialize the process of
spawning a thread to pull on the sink pad. There is a default
implementation.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_activate_pull)
(gst_base_sink_pad_activate_push, gst_base_sink_pad_activate)
(gst_base_sink_init): Renamed pad activation functions (inserting
"_pad" in their names). Refactor to use the new activate_pull
vmethod, as appropriate.
(gst_base_sink_class_init, gst_base_sink_activate_pull): Set the
default activate_pull function to start a task pulling from the
sink pad, as before.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* gst/gstpad.c (gst_pad_get_range, gst_pad_pull_range): Set caps
on the pads if necessary, as in push()/chain(). Update docs.
Shouldn't affect existing pull() usage as it is currently only
being used on buffers without caps.
Original commit message from CVS:
* gst/gst.c: (gst_init_get_option_group), (gst_init_check),
(init_pre):
Call g_thread_init() first thing in gst_init() / gst_check_init().
When initialisation is done via gst_init_get_option_group() and
GOption parsing, issue a warning if the GLib thread system has not
been initialised yet by the time gst_init_get_option_group() is
called, as it's quite likely other GLib functions such as
g_option_context_new() have been called already then, and
g_thread_init() must be called before any other GLib function. The
application in question must be fixed in that case, since memory
corruption might happen otherwise.
We issue the warning because even if the GLib folks decide to work
around the problem on their end in future, this is still an issue
with all GLib versions >= 2.10.0, so we should warn until we depend
on a GLib version we know to be safe.
Update documentation as well.
Closes bug #391278.
Original commit message from CVS:
* tools/gst-inspect.c: (main):
* tools/gst-launch.c: (main):
* tools/gst-typefind.c: (main):
* tools/gst-xmlinspect.c: (main):
Call g_thread_init() really really early, before any other GLib
function (see #342564 and recent discussion on gtk-devel-list).
Original commit message from CVS:
Patch by: Vincent Torri <vtorri at univ-evry dot fr>
* gst/gst_private.h:
* gst/gstconfig.h.in:
* gst/gstinfo.h:
On win32, all the __declspec stuff for symbol exporting is
apparently only needed with MSVC, but doesn't work with MingW.
Fixes compilation with MingW and #391909.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_activate_push):
Change some GST_ERROR_OBJECT that aren't really errors to
GST_WARNING_OBJECT in order to reduce terminal spam.
Original commit message from CVS:
* tests/check/Makefile.am:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST), (queue_suite):
enable queue test again, add tests for the leaky behaviour
Original commit message from CVS:
* configure.ac:
* tests/examples/Makefile.am:
Compile adapter test/example only if the required headers are
available (fixes#391915).
Original commit message from CVS:
* gst/gstplugin.c:
Restore the previous signal handler for SIGSEGV instead of
setting to default, since we may have stolen it away from
someone. (i.e., Mono)
Original commit message from CVS:
* gst/gstregistryxml.c: (gst_registry_save_escaped):
Make sure we don't pass non-UTF-8 strings to g_markup_escape(),
since that can lead to random memory corruptions and crashes
(may or may not be related to #383244, #386711, and #386711).
Original commit message from CVS:
* docs/design/part-states.txt:
two tiny additional comments
* gst/gststructure.c:
doc fixing
* tests/check/Makefile.am:
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST):
disable test for now, unless it gets fixed
Original commit message from CVS:
* tests/check/elements/.cvsignore:
ignore more
* tests/check/elements/queue.c: (queue_overrun), (queue_underrun),
(GST_START_TEST):
try to narrow test failure
Original commit message from CVS:
* plugins/elements/gstfakesrc.c:
Use g_random_int_range(), since it produces better random
numbers in a range than almost-correct floating point code.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek):
Fine tune the cases where the segment start/stop values are really
updated.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
Add tests for the return values of gst_segment_set_seek().
Original commit message from CVS:
* gst/gst.c:
Docs typo fix.
* plugins/elements/gstqueue.c: (gst_queue_class_init),
(gst_queue_init):
Fix incorrect documentation and flesh it out a bit more.
Set default values for the max properties on the GParamSpec as well,
so it shows up correctly in gst-inspect.
Original commit message from CVS:
* plugins/elements/gstidentity.c: (gst_identity_check_perfect):
Print additional debug info when the stream isn't perfectly
timestamped; don't try to use invalid durations.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstcollectpads.c: (ref_data), (unref_data),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_stop), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Add refcounting to the collectpads data so we can track when it's safe
to free the data. Fixes#383382.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad):
Automatically activate/deactivate pads when they are added to a
started/stoped collectpads.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_add_pad):
* gst/gstghostpad.c: (gst_ghost_pad_new_full):
* gst/gstpad.c: (gst_pad_init):
Set pads to FLUSHING when they are created. Check, warn and fix when a
demuxer adds an inactive pad to itself when running. Fixes#339326.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_class_init),
(gst_element_default_send_event), (gst_element_send_event),
(gst_element_default_query), (gst_element_query):
Expose default element send_event and query handling as vmethods that
subclasses can chain up to.
Original commit message from CVS:
* gst/gst.c: (init_pre), (init_post):
init_pre() and init_post() might be called via our GOptionGroup or
from gst_init(), and we should skip both of them if we've already
been initialised, otherwise we will init some things twice or add
two default log functions.
Original commit message from CVS:
* docs/manual/basics-bus.xml:
No, gst_main_loop does not exist. Its g_main_loop.
Discovered by somebody who abused the copy-paste technique of coding :)
Original commit message from CVS:
* gst/gstghostpad.c:
Log ghostpad debug stuff to the GST_PADS category as well rather
than just to the default category.
Original commit message from CVS:
* configure.ac:
* gst/gst.c: (init_pre):
Add some basic system details such as OS and architecture
to the debug output if possible, courtesy of uname().
Original commit message from CVS:
* tests/check/gst/gstbin.c: (GST_START_TEST):
It is acceptable to have a refcount of 2 or 3 at this point in the
test, because the pipeline might be just posting its state_change
message. The next line then waits for that message to appear using
bus_poll, so that should be fine too.
Original commit message from CVS:
* gst/gst.c: (ensure_current_registry_forking):
Ignore EINTR when reading from the child registry pipe.
Explicitly ignore the return value from close, since it makes no
difference.
* gst/gstminiobject.c: (gst_mini_object_ref),
(gst_mini_object_unref):
When debugging refcounts, check GST_IS_MINI_OBJECT and warn.
* gst/gstregistry.c: (_priv_gst_registry_remove_cache_plugins):
When removing cached plugins, remove their features too, so they're
not visible after they've disappeared.
* gst/gstutils.c: (prepare_link_maybe_ghosting):
In the unlikely case that we are linking pads with no parents, don't
crash trying to get the non-existent parent bin.
* gst/parse/grammar.y:
Output debug in the PIPELINE category
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* gst/gstclock.c: (gst_clock_new_periodic_id):
Reject invalid clock times for interval of periodic ids.
Fixes ##383506.
Original commit message from CVS:
* gst/gstelementfactory.c: (gst_element_factory_create):
* gst/gstpluginfeature.c: (gst_plugin_feature_load):
* gst/gsttypefindfactory.c: (gst_type_find_factory_call_function):
* tools/gst-inspect.c: (print_element_info):
Fix refcounting of gst_plugin_feature_load to match the docs.
Fixes: #380129
Original commit message from CVS:
Patch by: René Stadler <mail at renestadler dot de>
* gst/gstclock.c: (gst_clock_id_wait):
Make period ids add the interval to the origial requested time instead
of the possibly updated time which can be wrong when there are multiple
waiters for the same id. Fixes#382592.
* gst/gstsystemclock.c: (gst_system_clock_async_thread),
(gst_system_clock_id_wait_jitter_unlocked),
(gst_system_clock_id_wait_jitter):
Fix restart in the async notify thread when an async entry is added to
the front of the list. Fixes#381492.
* tests/check/gst/gstsystemclock.c: (store_callback),
(notify_callback), (GST_START_TEST), (gst_systemclock_suite):
Added test for multiple async waits.
Added test for async wait order.
Original commit message from CVS:
=== release 0.10.11 ===
2006-12-06 Jan Schmidt <thaytan@mad.scientist.com>
* configure.ac:
releasing 0.10.11, "Love never runs on time"
Original commit message from CVS:
* gst/gstvalue.c: (gst_value_compare_fraction):
If someone is foolish enough to compare 2 fractions with denominator =
0, return UNORDERED rather than aborting.
Original commit message from CVS:
* docs/libs/Makefile.am:
* docs/libs/gstreamer-libs.types:
add types of base classes to enable gobject specific stuff in the docs
* docs/random/ensonic/embedded.txt:
more ideas about isolating platform specific things
Original commit message from CVS:
Patch by: Sebastian Droege <slomo at ubuntu dot com>
* libs/gst/check/gstcheck.h:
Fix compilation and running against 0.9.4. Fixes#377332.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek),
(gst_segment_set_newsegment_full), (gst_segment_to_stream_time),
(gst_segment_to_running_time):
Fix boundary checking in to_running_time() and to_stream_time().
Fixes#377183.
* tests/check/gst/gstsegment.c: (GST_START_TEST):
stream and running time can now be calculated for the complete
clipped segment.
Original commit message from CVS:
* docs/random/ensonic/embedded.txt:
* docs/random/ensonic/profiling.txt:
* docs/random/ensonic/receipies.txt:
more thinking
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* gst/gstpad.c:
Fix documentation for gst_pad_dispatcher. Fixes#374475.
Original commit message from CVS:
Patch by: Jonathan Matthew <jonathan at kaolin dot wh9 dot net>
* libs/gst/base/gstbasesrc.c: (gst_base_src_update_length):
Store new length in segment duration so we don't keep on calling the
potentially expensize get_size() call. Fixes#370865.
Original commit message from CVS:
Patch by: Sergey Scobich <sergery.scobich at gmail com>
* win32/common/libgstreamer.def:
Add two missing symbols (#366492).
Original commit message from CVS:
* libs/gst/base/gstadapter.c: (gst_adapter_flush),
(gst_adapter_take_buffer):
Fix format string to use all its arguments.
Remove useless >= check on a guint
Original commit message from CVS:
* tests/examples/adapter/Makefile.am:
* tests/examples/adapter/adapter_test.c: (run_test_take),
(run_test_take_buffer), (run_tests), (main):
Add new files from the previous commit
Original commit message from CVS:
* Makefile.am:
* configure.ac:
* libs/gst/base/gstadapter.c: (gst_adapter_clear),
(gst_adapter_push), (gst_adapter_peek_into), (gst_adapter_peek),
(gst_adapter_flush), (gst_adapter_take), (gst_adapter_take_buffer):
* libs/gst/base/gstadapter.h:
* tests/check/libs/adapter.c: (create_and_fill_adapter),
(GST_START_TEST), (gst_adapter_suite):
* tests/examples/Makefile.am:
Do some optimisation work in GstAdapter to avoid copies in more cases.
It could still do slightly better by merging buffers when
gst_buffer_is_span_fast is true, but is already faster.
Also, avoid traversing a single-linked list to append each incoming
buffer inside the adapter.
Add simple test app that times the adapter behaviour in different
situations, and extend the unit test to check that bytes enter and
exit the adapter in their original order.
Original commit message from CVS:
* docs/random/draft-missing-plugins.txt:
Update: use element message instead of adding a new message
type to the core; don't provide GStreamer API to initiate the
plugin download, just provide API to compose the strings needed
and let an external libgimmestuff handle the rest.
Original commit message from CVS:
* tools/gst-inspect.c: (print_element_properties_info):
Print a string instead of 'unknown type' for GValueArray properties
Original commit message from CVS:
* tests/examples/typefind/typefind.c: (type_found), (main):
Make typefind element example work again (#371894); add a
license header.
Original commit message from CVS:
* docs/random/draft-missing-plugins.txt:
Commit initial draft about how to deal with missing plugins,
needs work (API too).
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* plugins/elements/gstfdsrc.c: (gst_fd_src_create):
Another printf fix (#371493).
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
add new API and fix the build
* gst/gstbin.c: (gst_bin_recalc_state):
* gst/gstelement.c: (gst_element_message_full),
(gst_element_get_state_func), (gst_element_set_state_func):
use new API and improve logging
* gst/gstutils.c: (gst_element_state_change_return_get_name):
* gst/gstutils.h:
API: add function to get StateChangereturn names to improve logs
Original commit message from CVS:
Patch by: Mark Nauwelaerts <manauw at skynet dot be>
* gst/gstpad.c: (gst_pad_init), (pre_activate),
(gst_pad_set_blocked_async), (gst_pad_acceptcaps_default),
(gst_pad_accept_caps), (handle_pad_block), (gst_pad_push_event):
Some small cleanups. Improve debugging.
* gst/gstpad.h:
Signal all waiting threads with a broadcast instead of just one.
Fixes#369942.
Original commit message from CVS:
* plugins/elements/gstfdsrc.c: (gst_fd_src_update_fd),
(gst_fd_src_create):
Add some debugging.
Only update fd when it's different from the old.
Original commit message from CVS:
Based on patch by: Jan David Mol <j.j.d.mol at tudelft nl>
* plugins/elements/gstfilesink.c: (gst_file_sink_class_init):
* plugins/elements/gstfilesrc.c: (gst_file_src_class_init),
(gst_file_src_map_small_region), (gst_file_src_create_mmap):
Printf fixes for gsize parameters on PPC/OSX (#369366). Also,
don't cast to long long for portability reasons, but use
GLib's types instead.
Original commit message from CVS:
* plugins/elements/gstfdsrc.c: (gst_fd_src_update_fd):
Get the arguments to lseek() the right way around.
Fixes 367677.
Original commit message from CVS:
Patch by: gorshkov <gorshkov at oghma dot on dot ca>
* gst/gstinfo.h:
_declspec should be __declspec (two underscores, not one). Fixes 366572.
Original commit message from CVS:
* win32/common/gstconfig.h:
Add GST_SEGMENT_FORMAT and GST_USING_PRINTF_EXTENSION to the
hand-made win32 gstconfig.h. Fixes#366321.
Original commit message from CVS:
* gst/gstghostpad.c: (gst_proxy_pad_do_acceptcaps),
(gst_ghost_pad_new_full):
Make acceptcaps return TRUE when we don't have a target, just like
setcaps does.
Original commit message from CVS:
* gst/gststructure.c: (gst_structure_id_set_value):
If someone tries to set a non-UTF8 string field on a structure,
don't just print a warning, but also ignore the request and do
not change/add that field to the structure.
* tests/check/gst/gsttag.c: (GST_START_TEST), (gst_tag_suite):
Test for the above.
Original commit message from CVS:
* gst/gstinfo.c:
* gst/gstinfo.h:
Change name parameter of _gst_debug_register_funcptr to const
to reflect the constness of its use in the function as well
as to quiet a gcc warning.
Original commit message from CVS:
* gst/gstevent.h:
Add small comment.
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc):
Debug segment values *after* updating them as this is more
interesting.
Original commit message from CVS:
* docs/design/part-events.txt:
Update some docs.
* docs/design/part-block.txt:
* gst/gstpad.c: (gst_pad_is_blocking), (handle_pad_block),
(gst_pad_push_event):
Revert BLOCKING patch, it tries to be smart without really having a
clear idea what or how. So, now we discard all FLUSHING events again on
a blocking pad. Should fix gnonlin again.
Original commit message from CVS:
* docs/random/ensonic/distributed.txt:
add some ideas about doing distributed processing
* docs/random/ensonic/profiling.txt:
get_rusage look promising
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_last_stop),
(gst_segment_set_seek), (gst_segment_set_newsegment_full):
_set_last_stop() must be with a value != -1
A _TYPE_SET to -1 means seek to 0.
Calc last_stop correctly for negative rates.
Make sure we work with positive durations when updating a segment.
Original commit message from CVS:
* gst/gstbuffer.h:
Add an explicit cast to GstBuffer** to keep old code that added an
explicit cast to GstMiniObject** for gst_mini_object_replace()
compiling without warning.
Original commit message from CVS:
Patch by: Peter Kjellerstedt <pkj at axis com>
* gst/gstobject.h:
Don't define xmlNodePtr to gpointer if the core was built with
--disable-loadsave and --disable-registry, this will break
applications that want to use libxml2 but are buildling against a
core that doesn't use libxml2. Use an intermediary type GstXmlNodePtr
instead so we don't have to mess with the libxml2 namespace
(#361675).
Original commit message from CVS:
* docs/design/part-live-source.txt:
describe howto handle latency
* docs/random/ensonic/profiling.txt:
more ideas
* tools/gst-plot-timeline.py:
fix log parsing for solaris, remove unused function
Original commit message from CVS:
Patch by: Marcus Granado <mrc dot gran at gmail com>
* win32/vs8/grammar.vcproj:
Error out with a warning if glib-genmarshal.exe is not in path,
instead of creating bogus gstmarshal.[ch] files. Fixes#361720.
Original commit message from CVS:
* gst/gstsegment.c: (gst_segment_set_seek):
When seeking to stop -1, set last_stop (current position) to the
duration of the segment.
Original commit message from CVS:
* gst/gstelement.h:
Clarify _NO_PREROLL a bit more.
* gst/gstevent.c:
Fix docs.
* gst/gstpad.c: (gst_pad_link_check_hierarchy),
(gst_pad_get_caps_unlocked), (gst_pad_save_thyself),
(handle_pad_block), (gst_pad_push_event), (gst_pad_send_event):
Patch by: Yves Lefebvre <ivanohe at abacom dot com> Fix possible deadlock
due to wrong locking order. Fixes#361769.
Remove some redundant/misplaced checks in pad_block.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
For negative rates, count backwards from the duration.
Original commit message from CVS:
* gst/gsterror.c: (_gst_library_errors_init):
Fix error message for GST_LIBRARY_ERROR_SETTINGS (feel free to come
up with something better).
Original commit message from CVS:
* win32/vs6/libgstreamer.dsp:
* win32/vs7/libgstreamer.vcproj:
* win32/vs8/libgstreamer.vcproj:
Don't reference glib-compat.c which is currently not used and not
disted; add gstquark.c which was recently added. Fixes#361730.
Original commit message from CVS:
* win32/common/libgstbase.def:
* win32/common/libgstcontroller.def:
* win32/common/libgstreamer.def:
Add gst_caps_merge() and a bunch of other recently-added functions.
Fixes#361732.
Original commit message from CVS:
* docs/plugins/gstreamer-plugins.args:
* docs/plugins/inspect/plugin-coreelements.xml:
* docs/plugins/inspect/plugin-coreindexers.xml:
Update element args.
* gst/gstsystemclock.c:
Small comment update.
* plugins/elements/gsttee.c: (gst_tee_class_init), (gst_tee_init),
(gst_tee_request_new_pad), (gst_tee_release_pad),
(gst_tee_buffer_alloc), (gst_tee_sink_activate_push),
(gst_tee_sink_activate_pull):
* plugins/elements/gsttee.h:
Some tee loving:
Add default property defines.
Implement release pad function.
Give properties better blubs etc.
Activate pads before adding them to a running tee.
Do simple buffer_alloc on the first requested pad.
Post error when activation fails.
