Commit graph

30 commits

Author SHA1 Message Date
Hou Qi
fe21b750f9 v4l2videodec: treat MPEG 1 format as MPEG 2
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4770>
2023-06-06 15:41:47 +00:00
Nicolas Dufresne
0c9ab49579 v4l2: videodec: Fix stalls on empty buffer
Drivers may signal end of sequence using an empty buffer and LAST buffer
set, or just an empty buffer on certain legacy implementation. When this
occured, we'd send GST_V4L2_FLOW_LAST_BUFFER were the code expected
GST_FLOW_EOS. Stop abusing GST_FLOW_EOS and port all the code to the new
GST_V4L2_FLOW_LAST_BUFFER.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4669>
2023-05-19 23:06:06 +00:00
Nicolas Dufresne
51fa6a2656 v4l2: pool: Flush events on capture queue
Unfortunately streamoff does not flush the events, and this can cause all
sort of issues. Flush events on capture queue. We also return
GST_V4L2_FLOW_RESOLUTION_CHANGE in case a resolution change was seen.
This allow skipping streamon(capture) on flush, which could lead to a
configuration miss-match, or failure if the buffers aren't of the right
size.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4437>
2023-05-01 15:08:10 -04:00
Nicolas Dufresne
00492234bd v4l2: videodec: Detect flushes while setting up the capture
As we missed the fact we were flushing, we could create and activate
that buffer pool, and wait on it, causing a hang. We detect that we
are flushing by checking the related pad state.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4437>
2023-05-01 13:45:39 -04:00
Nicolas Dufresne
c6be3d7505 v4l2: videodec: Don't forcibly drain on resolution changes
Let the driver detects the change and reconfigure the capture side
transparently from there. This avoid reallocation of the output buffers,
and eliminates the need to stop and restart the capture task. This is
only happening if the driver have support for this, otherwise the old
behaviour is maintained.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4437>
2023-05-01 13:44:53 -04:00
Nicolas Dufresne
f58d5dfd30 v4l2: videodec: Remove the spurious srccaps probe
We don't need to probe the srccaps in set_format() anymore, this
handled already in the capture thread while setting up the capture
queue.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4437>
2023-05-01 13:44:41 -04:00
Nicolas Dufresne
4a53beeb1f v4l2: videodec: Improve few logs
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4437>
2023-05-01 13:44:37 -04:00
Nicolas Dufresne
fca61fad4d v4l2: videodec: Only warn of incomplete drain on success
We may have hit an error, or just flushing in order to stop the thread,
in which case, not having drain everything is expected and not a
driver bug.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4437>
2023-05-01 13:44:19 -04:00
Nicolas Dufresne
66849fbdd1 v4l2: videodec: Wait for source change event
Stop doing capture buffer allocation based on guesses
and wait for the source change event when available.
Unlike stateless decoder, the stateful decoder is not aware of
the coded resolution, and this may lead to the wrong result
even when using TRY_FMT.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4437>
2023-05-01 13:43:16 -04:00
Nicolas Dufresne
52b916bdf5 v4l2: videodec: Move the capture setup into the processing loop
In previous implementation that job was split between handle_frame and
the processing loop and it wasn't clear if this mechanism was race
free. The capture setup would also be tried for every buffer, which was
not necessary.

This also simplify the handling of SRC_CH event, dropping the unneeded
atomic boolean.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4437>
2023-05-01 13:42:35 -04:00
Nicolas Dufresne
1ca7f6949e v4l2: videodec: Ensure object is inactive on failure
Sprinkle stop() calls in error case to guaranty that the capture object
is inactive on failure. Not doing so could allow some code to be called
in unexpected (and possibly undefined) conditions.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4437>
2023-05-01 13:42:02 -04:00
Nicolas Dufresne
e890e6e8d8 v4l2: Fix use after free of fmtdesc
The decoder needs to force another enumeration of the format. For
this it was clearing the v4l2object insternal list, leaving a fmtdesc
pointer pointing to freed memory. This patch clears the fmtdesc pointer
that has just been free. It also makes sure the probe function does not
use the cached formats list. The probe function will restore the current
fmtdesc pointer based on the currently configured pixelformat.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4317>
2023-04-13 15:32:14 +00:00
Nicolas Dufresne
3a17200638 v4l2: videodec: Prefer acquired caps over anything downstream
As we don't have anything smart in the fixation process, we may endup with
a format that has a lower bitdepth, even if downstream can handle higher
depth. it is notably the case when negotiating with deinterlace, which places
is non-passthrough caps before its passthrough one. This makes the generic
fixation prefer the formats natively supported by deinterlace element over
the HW 10bit format. As some HW can downscale 10bit to 8bit, this can break
10bit decoding.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4317>
2023-04-13 15:32:13 +00:00
Nicolas Dufresne
89854fd2f3 v4l2: videodec: Remove leading space in comment
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4317>
2023-04-13 15:32:13 +00:00
Pawel Stawicki
94ba019397 v4l2: Fix SIGSEGV on 'change state' during 'format change'
Ensure all access to v4l2object->pool imply taking a lock and a hard ref on the pool

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3481>
2022-12-01 12:47:54 +00:00
F. Duncanh
d77fe9495a v4l2videodec: Fixes three H.264/HEVC ITU conformance tests
Postpone the cleanup of any consecutive sequence of lost frames
which starts at frame 0, until frame 100 is dequeued from driver.

This allows fluster tests JVT/CVWP2_TOSHIBA_E, JVC/CVWP3_TOSHIBA_E
and HEVC/POC_A_Bossen_3 that sends out-of-order frames to successfully
complete  (e.g., test of Amphion vpu driver).

Fixes #1569

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3398>
2022-11-16 10:00:03 +00:00
Elliot Chen
e76e98d109 v4l2videodec: add cap negotiation fail check in the capture configuration change
The capture configuration change may cause negotiation fail.
Need to check it to avoid enter the endless loop.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2960>
2022-09-17 21:21:22 +00:00
fduncanh
735723c230 v4l2videodec: replace multiple decoder bug warnings with single one
Achieve this by dropping frames after a drain if the driver failed to so.
This works around RaspberryPi driver issue [1].

[1] https://github.com/raspberrypi/linux/issues/5059#issuecomment-

Fixes #1103

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2518>
2022-07-02 23:56:00 +00:00
fduncanh
dfeb8198e4 v4l2videodec: replace multiple decoder bug warnings by a single warning
(warning due to incorrectly dropped frames at initial caps adjustment)

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2517>
2022-06-29 19:50:15 +00:00
Nicolas Dufresne
7c40fcb66e v4l2videodec: Fix activation of internal pool
If the driver does not support VIDIOC_CREATE_BUFS ioctl, the pool
configuration may get changed, which requires a validation. This would
fail to activate a pool in a case it shouldn't normally fail unless we
are out of memory.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2456>
2022-06-28 16:19:53 +00:00
Nicolas Dufresne
6d6ebbbb36 v4l2videodec: Fix missing handling of resolution-change
The pool process function may poll and get the resolution-change event
whenever it is not possible to share our buffers. This typically happen
when downstream does not support GstVideoMeta.

Not handling this would cause the decoder thread to exit silently and the
pipeline to stall.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2457>
2022-05-24 18:02:12 +00:00
Nicolas Dufresne
4e441417b8 v4l2videodec: Downgrade to info resolution-change trace
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2457>
2022-05-24 18:02:12 +00:00
Xavier Claessens
b99ecc78ca Replace gst-i18n-*.h with gi18n-lib.h
GLib guarantees libintl is always present, using proxy-libintl as
last resort. There is no need to mock gettex API any more.

This fix static build on Windows because G_INTL_STATIC_COMPILATION must
be defined before including libintl.h, and glib does it for us as part
as including glib.h.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2028>
2022-04-19 18:01:06 +00:00
Hou Qi
8dcb8a28af v4l2videodec: copy colorimetry values to output_state caps
This is to avoid transcoding negotiation fail between v4l2h265dec
and v4l2h264enc caused by colorimetry mismatch.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2192>
2022-04-18 13:17:55 +00:00
Hou Qi
b962126b06 v4l2videodec: set frame duration according to framerate
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1953>
2022-03-16 14:15:04 +00:00
Hou Qi
738dbf1cb7 v4l2videodec: safely retrun from video_dec_loop with stream unlock
This is to avoid decoder hang when doing trick play between
different resolutions.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1960>
2022-03-16 02:13:00 +00:00
Ming Qian
24eb35f113 v4l2videodec : enable resolution change
The dynamic resolution changes when
the sequence starts when the decoder detects a coded frame with one or
more of the following parameters different from those previously
established (and reflected by corresponding queries):
1.coded resolution (OUTPUT width and height),
2.visible resolution (selection rectangles),
3.the minimum number of buffers needed for decoding,
4.bit-depth of the bitstream has been changed.

Although gstreamer parser has parsed the stream resolution.
but there are some case that we need to handle resolution change event.
1. bit-depth is different from the negotiated format.
2. the capture buffer count can meet the demand
3. there are some hardware limitations that the decoded resolution may
be larger than the display size. For example, the stream size is
1920x1080, but some vpu may decode it to 1920x1088.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1381>
2022-03-01 00:00:50 +00:00
Ming Qian
fe56af607b v4l2videodec : refactor the setup process of capture
v4l2videodec do some refactoring so that it can support
dynamic resolution change event.

1.wrap the setup process of capture as a function,
as decoder need setup the capture again when
dynamic resolution change event is received.

2.move the function "remove_padding"

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1381>
2022-03-01 00:00:50 +00:00
Nicolas Dufresne
01857d7941 v4l2videdec: Fix race condition between drain and state changes
This is due to an unsafe usage of the pad task. We didn't ensure proper
ownership of the task. That race involved the task being released too early,
and was detected, luckily, by the glib mutex implementationt that
reported the mutex being disposed while being locked.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/1478>
2022-01-21 16:36:50 +00:00
Thibault Saunier
5ff769d731 Move files from gst-plugins-good into the "subprojects/gst-plugins-good/" subdir 2021-09-24 16:13:50 -03:00
Renamed from sys/v4l2/gstv4l2videodec.c (Browse further)