Commit graph

114042 commits

Author SHA1 Message Date
Tim-Philipp Müller
642730bd67 Release 1.20.4 2022-10-12 16:39:51 +01:00
Tim-Philipp Müller
7275d3d136 Update ChangeLogs for 1.20.4 2022-10-12 16:39:40 +01:00
Seungha Yang
191b78a35a mxfdemux: Always calculate BlockAlign of raw audio
Workaround for nBlockAlign and nBitsPerSample mismatch. Always
use the formula described in the specification for BlockAlign value

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3149>
2022-10-09 12:54:42 +01:00
Mathieu Duponchelle
bda25f31a7 splitmuxsrc: don't consider unlinked pads when deactivating part
If splitmuxsrc exposes multiple pads, but only one is linked, part pads
will never see an EOS event. This shouldn't prevent the part from being
eventually deactivated.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3148>
2022-10-08 11:08:41 +00:00
Jan Schmidt
1477dab01d xvimagesink: Don't leak XvShmImage
If allocating an XvShmImage generates an X error, but
still returns some allocated memory, make sure to free it
so it doesn't leak.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3147>
2022-10-08 10:30:04 +00:00
Jan Schmidt
2a683372bc decodebin3: Make sure event is writable before modifying
Make sure we're operating on a private copy of an event when
modifying it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3146>
2022-10-08 10:42:59 +01:00
Jan Schmidt
32e175026f urisourcebin: Make sure event is writable before modifying.
Make sure we're operating on a private copy of an event before
modifying it.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3146>
2022-10-08 10:42:59 +01:00
Jan Schmidt
6e61030ded decodebin3: Don't lose a ref on EOS event
Make sure not to give away the ref on the final EOS
event for which the probe handler is returning GST_PAD_PROBE_REMOVE
when pushing the event manually.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3146>
2022-10-08 10:42:59 +01:00
Seungha Yang
05c503ff4a nvdec: Fix for HEVC decoding when coded resolution is larger than display resolution
As documented in the SDK header, we should set coded width/height
values to the corresponding decoder configuration option,
instead of display resolution

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1438
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3143>
2022-10-07 22:18:28 +00:00
Guillaume Desmottes
b5fde8d856 aggregator: fix input buffering
We need to be able to buffer at least the aggregator latency +
upstream latency, which is the value used to compute the aggregator
deadline.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3142>
2022-10-07 21:40:24 +00:00
Stéphane Cerveau
317d2a814f ges: remove memory leak with description
free the capsdesc

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3140>
2022-10-07 20:43:39 +00:00
Stéphane Cerveau
aaa7a690fa nle: clear seek event properly
Use gst_clear_event instead of g_clear_object
avoiding a failing gobject unref

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3140>
2022-10-07 20:43:39 +00:00
Sangchul Lee
f8b248cb1a webrtcbin: Fix pointer dereference before null check
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3133>
2022-10-07 19:51:17 +00:00
Sebastian Dröge
3b6234829a rtspsrc: Retry SETUP with non-compliant URL resolution on "Bad Request" and "Not found"
Various RTSP servers/cameras assume base and control URL to be simply
appended instead of being resolved according to the relative URL
resolution algorithm as mandated by the RTSP specification.

To work around this, try using such a non-compliant control URL if the
server didn't like the URL used in the first SETUP request.

Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1447
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/-/issues/922

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3137>
2022-10-07 18:54:57 +00:00
Aleksandr Slobodeniuk
c9219a0cb6 decodebin3: fix mutex leaks
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3130>
2022-10-07 17:19:32 +00:00
Mathieu Duponchelle
397c4c3392 avauddec: address regression with WMA files ..
By outputting lead-in samples that FFmpeg now would like us to ignore,
and discarding trailing samples that it would now like us to output.

See https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1474

Fixes: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/issues/1348
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3125>
2022-10-07 16:31:09 +00:00
Sangchul Lee
d6e8dc9077 webrtc/nice: Make sure to return NULL when validating turn server fails
It affects 'add-turn-server' signal action and 'turn-server' property
of webrtcbin.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3124>
2022-10-07 15:19:50 +00:00
Nirbheek Chauhan
4a4b87372c ci: Fix documentation build on CI for 1.20 branch
Due to some interaction between the latest meson version and the
subproject cache on the image, the build fails:

  File "/usr/local/lib/python3.7/site-packages/mesonbuild/mesonmain.py", line 153, in run
    return options.run_func(options)
  File "/usr/local/lib/python3.7/site-packages/mesonbuild/msubprojects.py", line 679, in run
    results = loop.run_until_complete(asyncio.gather(*tasks))
  File "/usr/lib64/python3.7/asyncio/base_events.py", line 587, in run_until_complete
    return future.result()
  File "/usr/lib64/python3.7/concurrent/futures/thread.py", line 57, in run
    result = self.fn(*self.args, **self.kwargs)
  File "/usr/local/lib/python3.7/site-packages/mesonbuild/msubprojects.py", line 126, in run
    result = self.run_method()
  File "/usr/local/lib/python3.7/site-packages/mesonbuild/msubprojects.py", line 411, in update
    self.wrap.update_hash_cache(self.wrap_resolver.dirname)
  File "/usr/local/lib/python3.7/site-packages/mesonbuild/wrap/wrap.py", line 228, in update_hash_cache
    with open(self.get_hashfile(subproject_directory), 'w', encoding='utf-8') as file:
FileNotFoundError: [Errno 2] No such file or directory: './subprojects/pango-1.48.11/.meson-subproject-wrap-hash.txt'

https://gitlab.freedesktop.org/tpm/gstreamer/-/jobs/29467932

The error is in a different wrap each time. Restricting the meson
version to an older one fixes it, which is fine for a stable branch.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3139>
2022-10-07 19:47:19 +05:30
Jan Schmidt
4332635d9e playsink: Hold a reference to the soft volume element
Always hold a reference to the soft volume element
provided by the playsinkaudioconvert bin helper, the
same as when volume is provided by a sink element,
or the soft volume element gets unreffed too soon.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3113>
2022-10-03 22:53:44 +01:00
Edward Hervey
4ab71ca3f1 queue2: Hold the lock when modifying sinkresult
As it's done elsewhere. Avoids a potential race of the field being modified in
the meantime.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3111>
2022-10-03 17:19:53 +01:00
Tim-Philipp Müller
67245861a2 avauddec: fix unnecessary reconfiguration if the audio layout isn't specified
It would constantly want to renegotiate (and spam the debug log) even
though the channel layout hasn't actually changed. We use the same
fallback in gst_ffmpegauddec_negotiate() already.

This happens with WMA files for example.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3105>
2022-10-01 11:39:00 +01:00
Tim-Philipp Müller
6b316052dc pbutils: descriptions: fix gst_pb_utils_get_caps_description_flags()
And add a little unit test.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3098>
2022-09-30 12:51:46 +01:00
James Cowgill
a08c972414 xmptag: Call gst_tag_register_musicbrainz_tags during init
We need to call this to register the MusixBrainz tags before we use
them in an XMP schema.

Fixes this critical when attempting to run jpegparse on a JPEG
containing MusicBrainz XMP tags:

  GStreamer-CRITICAL **: 20:41:07.885: gst_tag_get_type: assertion 'info != NULL' failed

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3095>
2022-09-30 01:45:34 +01:00
Philipp Zabel
1c8244a19d buffer: drop parent meta in deep copy/foreach_metadata
The purpose of a deep buffer copy is to be able to release the source
buffer and all its dependencies. Attaching the parent buffer meta to
the newly created deep copy needlessly keeps holding a reference to the
parent buffer.

The issue this solves is the fact you need to allocate more
buffers, as you have free buffers being held for no reason. In the good
cases it will use more memory, in the bad case it will stall your
pipeline (since codecs often need a minimum number of buffers to
actually work).

Fixes #283

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3090>
2022-09-29 11:57:53 +01:00
Mart Raudsepp
b19116b786 tsdemux: Don't trigger a program change when falling back to ignore-pcr behaviour
Since commit a79a756b79 we could change to ignore-pcr automatically at 500ms
into a live stream when no PCR is seen by then. However the stream counting in
program change detection was wrongly considering ignore-pcr programs to have a
separate PCR PID, even though we are actually ignoring the PCR PID completely,
resulting in an erroneous program switch getting triggered from the different
stream count. This in turn would send an EOS and switch out the pads for what
actually is still the same program, while we intended to simply apply a
workaround for broken encoders.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3089>
2022-09-28 12:27:19 +01:00
Edward Hervey
66064568de decodebin3: Fix memory issues with active selection list
This had a couple of issues:
* The backing strings (from GstStream) could disappear
* The actual list wasn't properly reset/freed when decodebin3 was re-used

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3087>
2022-09-27 18:05:32 +00:00
Tim-Philipp Müller
d5577bbe5c qtdemux: guard against timestamp calculation overflow in gap event loop
Could possibly cause an endless loop.

Fixes #1400.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3085>
2022-09-27 15:04:06 +01:00
Sebastian Dröge
c2c20d2437 gsturi: When setting the same string again do nothing
Otherwise code like gst_uri_set_host(uri, gst_uri_get_host(uri)) would
first free the string, then create a copy of the freed string and then
assigned that.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3081>
2022-09-27 09:37:20 +01:00
Paweł Stawicki
0589e3ca80 queue2: Fix deadlock when deactivate is called in pull mode
check is flush was called before waiting on condition

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3058>
2022-09-20 17:22:05 +01:00
Andrew Pritchard
b91c2c1c65 Fix GstAmcSurfaceTexture segfault
Check that `self` and `self->callback` are defined. `self` can be set to
`NULL` in `remove_listener`, and `self->callback` can be set to `NULL`
inside `gst_amc_surface_texture_jni_set_on_frame_available_callback`.
This can cause a segfault since the Java object can outlive the C
object, and call the callback after `remove_listener` is called.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/3056>
2022-09-20 15:37:47 +01:00
Matthew Waters
2a4f96861e subparse: fix crash when parsing invalid timestamps in mpl2
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=49245

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2999>
2022-09-07 15:41:13 +01:00
Bruce Liang
ebf3aa046e gst-rtsp-server: Fix pushing backlog to client
Check back pressure of a stream transport before popping buffer from its backlog.

If the stream transport is not experiencing back pressure, the buffer can be popped from backlog and pushed to client.

Fixes:#1298

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2998>
2022-09-07 11:57:49 +00:00
Sebastian Dröge
1c3636f184 rtpjitterbuffer: Add test for crash caused by removing timers twice
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2996>
2022-09-07 11:26:41 +00:00
Sebastian Dröge
773b7f61f2 rtpjitterbuffer: Make it more explicit that update_rtx_timers() takes ownership of the passed in timer
It is not valid anymore afterwards and must not be used, otherwise an
already freed pointer might be used.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2996>
2022-09-07 11:26:41 +00:00
Sebastian Dröge
646766629f rtpjitterbuffer: Don't shadow variable
While this didn't cause any problems in this context it is simply
confusing.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2996>
2022-09-07 11:26:41 +00:00
Sebastian Dröge
94122ba11b rtpjitterbuffer: Change RTX timer availability checks to assertions
It's impossible to end up in the corresponding code without a timer for
RTX packets because otherwise it would be an unsolicited RTX packet and
we would've already returned early.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2996>
2022-09-07 11:26:41 +00:00
Sebastian Dröge
dc408d56c5 rtpjitterbuffer: Only unschedule timers for late packets if they're not RTX packets and only once
Timers for RTX packets are dealt with later in update_rtx_timers(), and
timers for non-RTX packets would potentially also be unscheduled a
second time from there so avoid that.

Also don't shadow the timer variable from the outer scope but instead
make use of it directly.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2996>
2022-09-07 11:26:40 +00:00
Sebastian Dröge
2b9009f504 rtsp-server: stream: Don't loop forever if binding to the multicast address fails
The address/port is pre-defined by the caller of the function, so
retrying is only going to loop forever.

Ideally the multicast address should be checked after allocating but
this doesn't happen currently, so it's better to error out cleanly then
to loop forever trying the same address.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2997>
2022-09-07 11:55:29 +01:00
Raul Tambre
8bb230b72a rtpjitterbuffer: remove lost timer for out of order packets
When receiving old packets remove the running lost timer if present.
This fixes incorrect reporting of a lost packet even if it arrived in time.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2995>
2022-09-07 11:17:54 +01:00
Martin Dørum
674bb309d8 gstpluginloader: Don't hang on short reads/writes
If read_one or write_one was called but the stream closed before it could
read/write a whole packet, read_one/write_one would hang indefinitely,
consuming 100% CPU. This commit fixes that by treating a short read/write
as an error.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2994>
2022-09-07 10:15:51 +01:00
Xavier Claessens
1ba67eab9e gst_init: Initialize static plugins just before dynamic plugins
All plugins needs to be initialized after `gst_initialized = TRUE;`
otherwise they could complain that gst_init() has not been called.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2991>
2022-09-07 09:38:20 +01:00
Sebastian Dröge
186d8bd789 rtpvp8depay: If configured to wait for keyframes after packet loss, also do that if incomplete frames are detected
This can happen if the data inside the packets is incomplete without the
seqnums being discontinuous because of ULPFEC being used.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2988>
2022-09-07 00:52:32 +00:00
4414271a02 audiovisualizer: fix buffer mapping to not increase refcount
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2987>
2022-09-07 01:02:54 +01:00
Olivier Crête
fa10a28016 value: Use g_critical() when trying to serialize things that can't be
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2986>
2022-09-06 23:05:21 +01:00
Olivier Crête
1d32310089 gstvalue: Don't loop forever when serializing invalid flag
The serialization code would loop forever if an invalid flag was sent into it.

With unit test for this corner case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2986>
2022-09-06 23:05:20 +01:00
Piotr Brzeziński
8a81e5b9ff avfvideosrc: Fix wrong default framerate value
Current default G_MAXINT is not a correct value under any circumstances.
This creates an issue with screen capture, during which we currently do
not get any framerate info causing G_MAXINT to show up, where elements
downstream can possibly misbehave - for example, `vtenc` causes
a kernel panic.
Replace with 30/1 to avoid such scenarios.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2946>
2022-09-06 19:49:27 +00:00
Jianhui Dai
24bf32cf54 v4l2allocator: Fix invalid imported dmabuf fd
Fix a typo that set userptr to dmabuf fd. It leads to failure of
dmabuf-import io-mode.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2940>
2022-09-06 18:40:01 +00:00
Tim-Philipp Müller
3fb943472e subprojects: remove pcre.wrap
Remove pcre.wrap since it is pulled in automatically by glib and not
used by gstreamer.

Hopefully this fixes the msvc ci on the 1.20 branch which failed with
"gregex.c.obj : error LNK2001: unresolved external symbol pcre_free"
on pcre-8.45.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2985>
2022-09-06 18:22:11 +01:00
zhiyuan.liu
ede7bf44cf isoff: Fix earliest pts field parse issue
earliest pts will be covered by first_offset field on version 0 case.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2934>
2022-08-24 11:03:45 +02:00
Philippe Normand
d2110dfe1d openh264: Register debug categories earlier
Otherwise the GST_ERROR message logged in case of ABI mismatch would be done on
an uninitialized category.

Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/2924>
2022-08-22 22:28:19 +02:00