Commit graph

2658 commits

Author SHA1 Message Date
Tim-Philipp Müller
8249c6db0e controller: fix annotation to make g-ir-scanner happy
gstinterpolationcontrolsource.h:59: Warning: GstController: missing ":" at column 51:
 * @GST_INTERPOLATION_MODE_CUBIC_MONO: (Since 1.8) monotonic cubic interpolation, will not
gstinterpolationcontrolsource.h:59: Warning: GstController: unknown annotation: since
2015-11-20 19:45:39 +00:00
Thiago Santos
b93369c78a Revert "baseparse: do not overwrite header buffer timestamps"
This reverts commit 2c475a0355.

This causes issues with h264parse. It breaks timestamps as
there are headers in the middle of the stream and this patch
makes the timestamps for those differ from the ones that
are adjusted, creating a discontinuity and leading to sync
issues.
2015-11-19 00:57:17 -03:00
Thiago Santos
5feba38a4e Revert "baseparse: simplify code a bit"
This reverts commit 3984f7159a.
2015-11-19 00:57:08 -03:00
Sebastian Dröge
533d1c8eb7 ptp-helper: Disable multicast loopback
We're not really interested in our own packets and ignore them anyway.
2015-11-18 09:21:23 +02:00
Thiago Santos
3984f7159a baseparse: simplify code a bit
Avoid repeated checks for testing if a buffer is a header
2015-11-16 08:22:14 -03:00
Thiago Santos
42d45a0f40 collectpads: handle buffer with dts-only when mapping to running time
Otherwise the buffer was left with the original values and later would
be compared with other buffers that were converted to runninn time,
leading to bad interleaving of multiple streams.

https://bugzilla.gnome.org/show_bug.cgi?id=757961
2015-11-14 10:50:35 -03:00
Thiago Santos
971ac61c36 baseparse: do not overwrite header buffer timestamps
baseparse tries to preserve timestamps from upstream if
it is running on a time segment and write that to
output buffers. It assumes the first DTS is going to be
segment.start and sets that to the first buffers. In case
the buffer is a header buffer, it had no timestamps and
will have only the DTS set due to this mechanism.

This patch prevents this by skipping this behavior for
header buffers.

https://bugzilla.gnome.org/show_bug.cgi?id=757961
2015-11-14 10:50:35 -03:00
Ross Burton
09aa20746a helpers: fix install race
The install hook needs to be a install-data-hook not an install-exec-hook as the
helpers are installed into helperdir which is considered data (only path
variables with "exec" in are considered executables).

The explicit dependency on install-helpersPROGRAMS was an attempt at solving
this, but this causes occasional races where install-helpersPROGRAMS can run
twice in parallel (once via install-all, once via the hook's dependency).

https://bugzilla.gnome.org/show_bug.cgi?id=758029
2015-11-13 09:40:44 +01:00
Tim-Philipp Müller
220dbfc13c docs: remove dummy function declarations with G_INLINE_FUNCTION for gtk-doc
gtk-doc can handle static inline functions just fine these days,
there's no need for this stuff any more.
2015-11-09 17:59:16 +00:00
Stian Selnes
85b93fa347 netaddressmeta: gst_buffer_get_net_address_meta() as function
Implement gst_buffer_get_net_address_meta() as a function instead
of a macro in order to get gobject-introspection to work.

https://bugzilla.gnome.org/show_bug.cgi?id=702921
2015-10-27 12:59:24 +00:00
Edward Hervey
16458daddb collectpads: Use GST_BUFFER_DTS_OR_PTS
Simplifies code a bit
2015-10-27 08:33:41 +01:00
Guillaume Desmottes
66b6d355e4 basesink: rename argument of PREROLL_{COND,LOCK} macros
They take a GstBaseSink instance as argument at not a GstPad. Rename the
argument to 'obj' which is not miss leading and in line with
GST_BASE_SINK_PAD(obj).

https://bugzilla.gnome.org/show_bug.cgi?id=756954
2015-10-22 13:49:06 +01:00
Sebastian Dröge
1efb451154 Use new GST_ENABLE_EXTRA_CHECKS #define
https://bugzilla.gnome.org/show_bug.cgi?id=756870
2015-10-21 14:31:56 +03:00
Edward Hervey
55f6582159 baseparse: Update internal position even if not linked
Our current position has nothing to do with being linked or not.

Avoids having stray segment updates fired every 2s
2015-10-12 17:30:38 +02:00
Sebastian Dröge
29d11c4566 gst-ptp-helper: #include <sys/socket.h> to fix net/if.h include on OSX 10.6
In file included from gst-ptp-helper.c:40:0:
   /usr/include/net/if.h:265:19: error: field 'ifru_addr' has incomplete type
      struct sockaddr ifru_addr;

https://bugzilla.gnome.org/show_bug.cgi?id=756136
2015-10-07 11:30:14 +01:00
Vineeth TM
215cfcf993 gstreamer: Fix memory leaks when context parse fails
When g_option_context_parse fails, context and error variables are not getting free'd
which results in memory leaks. Free'ing the same.

And replacing g_error_free with g_clear_error, which checks if the error being passed
is not NULL and sets the variable to NULL on free'ing.

https://bugzilla.gnome.org/show_bug.cgi?id=753851
2015-10-02 17:31:11 +03:00
Jan Alexander Steffens (heftig)
d3e9f55302 timedvaluecontrolsource: Use g_sequence_lookup where possible
When looking for exact matches in the sequence, this results
in much simpler code than when using g_sequence_search.

https://bugzilla.gnome.org/show_bug.cgi?id=755498
2015-10-02 17:30:38 +03:00
Stefan Sauer
9a30399e4f interpolationcontrolsource: fix write over the array size
The '++' got incidentially added during the refactoring in
2fe3939ce7.
2015-10-01 22:12:50 +02:00
Stefan Sauer
8487133114 controlpoint: change the padding to be of arch-independent size
The default padding I introduced in d4f81fb4e6 is
actually only 4 pointers and on 32bit platforms already smaller than the union.
Replace it with a fixed 64byte padding. Don't add the normal padding for now.

Fixes #755822
2015-09-30 17:31:58 +02:00
Tim-Philipp Müller
5d3c58902f check: fix 'format string is not a string literal' warning with clang
Broke this when I removed the G_GNUC_PRINTF in a previous
commit to fix indentation, since it was not really needed.
Turns out unlike gcc clang warns though if a non-literal
format string is passed then. Fix indentation differently.

http://clang.llvm.org/docs/AttributeReference.html#format-gnu-format
2015-09-28 20:10:31 +01:00
Stefan Sauer
653f9148bd directcontrolbinding: fix formatting 2015-09-28 16:23:41 +02:00
Stefan Sauer
05dbad27c5 index: mark two structs that don't have abi padding 2015-09-28 16:23:41 +02:00
Stefan Sauer
d4f81fb4e6 controller: add the missing abi padding
While this technically is an abi break, we decided to do this:
1) the struct is documented to be internal
2) the struct is alloced and freed inside the library
3) there are no public methods that receive or return instances
4) the only code known to use this struct are classes containd here
2015-09-28 16:23:41 +02:00
Stefan Sauer
56f12705ca interpolationcontrolsource: add cubic_mono interpolation
This new mode won't overshoot the min/max y values set by the control-points.
Fixes #754678
API: GST_INTERPOLATION_MODE_CUBIC_MONO
2015-09-27 12:46:01 +02:00
Stefan Sauer
2fe3939ce7 interpolationcontrolsource: refactor code
Extract common code that looks up the control-points around the timestamp. Add
some comments for future investigation.
2015-09-27 11:45:29 +02:00
Tim-Philipp Müller
cc217289a7 harness: minor doc fixes 2015-09-26 11:03:24 +01:00
Vivia Nikolaidou
44ba1565d9 segment: Replaced gst_segment_to_position with gst_segment_position_from_running_time
gst_segment_to_position might cause confusion, especially with the addition of
gst_segment_position_from_stream_time . Deprecated gst_segment_to_position
now, and replaced it with gst_segment_position_from_running_time.

Also added unit tests.
2015-09-26 00:00:08 +02:00
Vineeth TM
dc0ae9203a ptpclock: Fix error leak during failures
https://bugzilla.gnome.org/show_bug.cgi?id=755607
2015-09-25 10:14:45 +02:00
Havard Graff
64a152439c harness: don't crash when adding a sink-harness without h->sinkpad
https://bugzilla.gnome.org/show_bug.cgi?id=755511
2015-09-24 11:07:24 +01:00
Sebastian Dröge
73263271bb basetransform: Print buffer PTS when submitting an input buffer 2015-09-23 20:31:48 +02:00
Vineeth TM
fcdfcbd618 downloadbuffer, benchmarks: fix error leaks in failure code paths
https://bugzilla.gnome.org/show_bug.cgi?id=755019
2015-09-15 18:21:58 +01:00
Vineeth TM
f409dd48e0 check: Fix indentation
https://bugzilla.gnome.org/show_bug.cgi?id=755019
2015-09-15 18:21:27 +01:00
Stian Selnes
ff9a78196c harness: Fix race for gst_harness_element_ref
In order for gst_harness_new_full to be MT-safe the increase and
decrease of HARNESS_REF must be MT-safe. This allows for creating
multiple harnesses from different threads wrapping the same element.

https://bugzilla.gnome.org/show_bug.cgi?id=754661
2015-09-07 11:31:33 +01:00
Stian Selnes
615e5b01c6 harness: Allow-none for custom stress init func
It should be allowed to not have a function to initialize the user data
since it's often not necessary; it may already be initialized.

https://bugzilla.gnome.org/show_bug.cgi?id=754661
2015-09-07 11:30:37 +01:00
Havard Graff
b2ce23074e harness: misc bugfixes
1. Get a list of pad templates from the element class, not the
factory. This allows us to interact with test-elements that does
not have a factory.

2. Use the pad_template_caps in caps-queries when caps is not set
explicitly on the pad. Not doing so is simply wrong, and prohibits
interactions with special templates used for testing.

https://bugzilla.gnome.org/show_bug.cgi?id=754193
2015-08-31 12:03:09 +01:00
Nicolas Dufresne
2534e39e55 basetransform: Reconfigure before propose_allocation
There exist cases where a reconfigure event was propagated from
downstream, but caps didn't change. In this case, we would
reconfigure only when the next buffer arrives. The problem is that
due to the allocation query being cached, the return query parameters
endup outdated.

In this patch we refactor the reconfigurating code into a function, and
along with reconfiguring when a new buffer comes in, we also reconfigure
when a query allocation arrives.

https://bugzilla.gnome.org/show_bug.cgi?id=753850
2015-08-21 15:14:34 -07:00
Tim-Philipp Müller
a887d81bfa baseparse: avoid tag list spam if upstream provides bitrate tags already
Explicitly keep track again whether upstream tags or parser tags
already contain bitrate information, and only force a tag update
for a bitrate if we are actually going to add the bitrate to the
taglist later. This fixes constant re-sending of the same taglist,
because upstream provided a bitrate already and we didn't add it,
so we didn't save the 'posted' bitrate, which would then in turn
again trigger the 'bitrate has changed too much, update tags'
code path. Fixes tag spam with m4a files for example.

https://bugzilla.gnome.org/show_bug.cgi?id=679768
2015-08-18 15:51:53 +01:00
Tim-Philipp Müller
4ec358773a baseparse: fix tag handling
In 0.10 there were no sticky events, and all tag events
sent would just be merged with the previously-received
tags. In 1.x we have sticky events, and the tags in the
tag event(s) should at all times carry the complete tags,
so we can't just push some tags and then just push tags
with just bitrates to update the bitrates, etc.

Instead we need to keep track of the upstream stream tags
received, of the tags set by the video decoder subclass,
and send an updated tag event with the combined tags
including our own bitrate tags (if applicable) whenever
the upstream tags, the subclass tags or any of our bitrates
change.

https://bugzilla.gnome.org/show_bug.cgi?id=679768
2015-08-16 14:32:24 +01:00
Tim-Philipp Müller
41b85d91eb baseparse: add API for subclass to set tags
This is needed so that we can do proper tag handling
all around, and combine the upstream tags with the
tags set by the subclass and any extra tags the
base class may want to add.

API: gst_base_parse_merge_tags()

https://bugzilla.gnome.org/show_bug.cgi?id=679768
2015-08-16 14:32:23 +01:00
Tim-Philipp Müller
d60c249f51 baseparse: save upstream stream tags
We'll need those later.

https://bugzilla.gnome.org/show_bug.cgi?id=679768
2015-08-16 12:29:10 +01:00
Tim-Philipp Müller
bc1fb2d8b0 baseparse: minor code simplification
Use gst_pad_peer_query_duration() and remove a few
unnecessary levels of indentation. Rest of code might
looks a bit questionable, but leave it as is for now.
2015-08-15 18:41:31 +01:00
Thiago Santos
e0cc0e0888 basetransform: rework accept-caps
According to the design docs:
The ACCEPT_CAPS query is not required to work recursively, it can simply
return TRUE if a subsequent CAPS event with those caps would return
success.

So make it a shallow check instead of recursivelly check downstream.

https://bugzilla.gnome.org/show_bug.cgi?id=748635
2015-08-13 14:07:35 -03:00
Thiago Santos
42acf05b22 basetransform: remove some dead code
Doesn't seem like it is going to get back to life anytime soon

Also removes a {} block that was likely used to keep the dead
code around.
2015-08-13 12:45:35 -03:00
Thiago Santos
7ec54c2217 basetransform: respect accept-caps intersect flag
GstPad has a flag for suggesting if the accept-caps
query should use intersect instead of the default
subset caps operation to verify if the caps would be
acceptable.

basetransform currently always uses the subset check and
this patch makes it honor the flag for using intersect
if it is set.

https://bugzilla.gnome.org/show_bug.cgi?id=748635
2015-08-13 06:01:36 -03:00
Vineeth TM
039ac81ee3 basetransform: remove unreachable return statement
https://bugzilla.gnome.org/show_bug.cgi?id=753538
2015-08-12 10:34:59 +01:00
Havard Graff
28100e0b6a harness: add _set_forwarding function
To be able to disable the slightly "magic" forwarding of the
necessary events between the harnesses.

Also introduce a new test-suite for GstHarness, that documents the
feature, and should hopefully expand into documenting most of the
features the harness possesses.

https://bugzilla.gnome.org/show_bug.cgi?id=752746
2015-08-09 16:02:37 +01:00
Nicolas Dufresne
e24e902d2f basesink: Only drop buffer if their PTS is out of segment
As of now, even for stream completly inside segment, there is no
guarantied that the DTS will be inside the segment. Specifically
for H.264 with B-Frames, the first few frames often have DTS that
are before the segment.

Instead of using the sync timestamp to clip out of segment buffer,
take the duration from the start/stop provided by the sub-class, and
check if the pts and pts_end is out of segment.

https://bugzilla.gnome.org/show_bug.cgi?id=752791
2015-08-05 15:51:27 -04:00
Luis de Bethencourt
60de1f26c7 harness: don't run code inside g_assert
Even though asserts can't be disabled in GstHarness, Coverity still
complains about running code inside them. Moving the code to outside the
g_asserts().

CID #1311326, #1311327, #1311328
2015-08-05 14:05:27 +01:00
Nicolas Dufresne
d47b567f2f doc/gsthardness: Fix typo in GstAllocationParams
It's not GstAllocatorParams but GstAllocationParams.
2015-07-28 15:50:40 -04:00
Nicolas Dufresne
67e53e4adc doc/gstharness: Remove unknown parameter
sink_elenment_name is not a parameter of gst_harness_add_sink_harness()
function, but still it show up in documentation.
2015-07-28 15:46:09 -04:00