Original commit message from CVS:
* gst/mpegstream/gstmpegpacketize.c: (gst_mpeg_packetize_put),
(read_cache):
* gst/mpegstream/gstmpegpacketize.h:
g_malloc() can't fail, we don't need to handle this. Same for
gst_buffer_new_and_alloc().
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_chain):
klass->send_buffer() should have the same semantics as
gst_pad_push(), ie. ownership of the buffer is transfered,
so we never have to unref the buffer no matter what the flow
return value was.
Original commit message from CVS:
add test for amrnbenc, enable test infrastructure, and fix a leak
* common/check.mak:
allow for specifying more than one suppressions file in SUPPRESSIONS
* Makefile.am:
* tests/Makefile.am:
* tests/check/.cvsignore:
* tests/check/Makefile.am:
* tests/check/elements/.cvsignore:
* configure.ac:
add tests/check
* tests/check/gst-plugins-ugly.supp:
add suppressions for libs used by -ugly
* tests/check/elements/amrnbenc.c: (buffer_new), (buffer_unref),
(setup_amrnbenc), (cleanup_amrnbenc), (push_data),
(GST_START_TEST), (amrnbenc_suite), (main):
add a simple test for encoding amr
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_init):
fix pad template leaks
Original commit message from CVS:
* ext/mad/gstmad.c: (index_seek):
move GstIndexEntry *entry variable declaration before
the first instruction
* ext/mad/gstmad.c:
remove debug macros with variable number of parameter by using
GST_DEBUG for WIN32
* gst/dvdsub/gstdvdsubdec.c: (gst_dvd_sub_dec_parse_subpic):
use gst_guint64_to_gdouble for conversions
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_sync_stream_to_time):
replace __FUNCTION__ which is not supported by MSVC by the current function name
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_reset):
remove LL suffix by using G_GINT64_CONSTANT
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_parse_packhead),(gst_mpeg_parse_get_rate):
use gst_guint64_to_gdouble for conversions
* gst/mpegstream/gstmpegparse.h:
remove LL suffix by using G_GINT64_CONSTANT
* win32/vs6:
add project files for tagac3parse, asfdemux, dvdlpcmdec, dvdsub, iec958, lame,
mad, mpegaudioparse, mpegstream, realmedia, synaesthesia
Original commit message from CVS:
Patch by: Fabrizio Gennari <fabrizio dot ge at tiscali dot it>
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_sink_event),
(gst_asf_demux_push_buffer):
Send newsegment event only once per pad, fixes#336550.
Original commit message from CVS:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_handle_src_event):
Don't unref event unconditionally after giving away ownership
(gst_pad_push_event(), gst_pad_send_event() and
gst_pad_event_default() take ownership of the event
passed to them). Fixes warnings/crashes caused by
navigation events.
Original commit message from CVS:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_send_subbuffer):
Don't ref NULL caps (private streams have NULL caps) (#336387);
also, no need to set caps on the same buffer twice.
Original commit message from CVS:
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_process_event),
(gst_dvd_demux_handle_dvd_event), (gst_dvd_demux_get_audio_stream),
(gst_dvd_demux_get_subpicture_stream):
* gst/mpegstream/gstmpegdemux.c:
(gst_mpeg_demux_sync_stream_to_time):
Don't leak element and pad names in error messages, use
GST_DEBUG_PAD_NAME instead. Add some more debug code.
Original commit message from CVS:
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_init),
(gst_dvd_read_src_goto_title), (gst_dvd_read_src_read):
Name the structure in the custom event with the
language codes for the audio and subtitle streams
actually like dvddemux expects it to be named.
Set caps on source pad and outgoing buffers.
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_init), (gst_lame_set_property),
(gst_lame_get_property), (gst_lame_setup):
* ext/lame/gstlame.h:
Make xingheader property non-functional, it's broken anyway
after all (use xingmux instead).
Original commit message from CVS:
* ext/lame/gstlame.c: (gst_lame_sink_event):
On EOS, flush encoder and send remaining data. Fix
return value handling in sink event function.
Original commit message from CVS:
Patch by: Jürg Billeter <j at bitron dot ch>
* ext/dvdread/dvdreadsrc.c: (gst_dvd_read_src_set_property):
Fix wrong check for started flag when setting the 'device' property.
We want to allow it when the source is NOT started yet and ignore it
when the source is running.
Original commit message from CVS:
Patch by: Fabrizio Gennari <fabrizio dot ge at tiscali dot it>
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_setup_pad),
(gst_asf_demux_process_chunk):
* gst/asfdemux/gstasfdemux.h:
Subtract first timestamp from timestamps, so that
stream starts from 0; makes live streams that don't
start at 0 work again (fixes#317310, #336097).
Original commit message from CVS:
Patch by: Christian Kirbach
* configure.ac:
Remove CXX tag from AS_LIBTOOL_TAGS, just like we did for
-good. Fixes build on some systems (#331838).
Original commit message from CVS:
* gst/realmedia/rmdemux.c: (gst_rmdemux_add_stream),
(gst_rmdemux_parse_cont):
Extract more tags and also post codec name tag on the
bus so this shows up in totem and nautilus.
Original commit message from CVS:
* gst/realmedia/rmdemux.c: (gst_rmdemux_add_stream),
(gst_rmdemux_fill_audio_packet), (gst_rmdemux_parse_packet):
Extra data usually goes into the caps as 'codec_data', not
as first buffer into the stream.
Need to byte swap AC3 content in realmedia files for some
reason (fixes#331588).
Original commit message from CVS:
* gst/realmedia/rmdemux.c: (gst_rmdemux_init),
(gst_rmdemux_validate_offset), (gst_rmdemux_loop),
(gst_rmdemux_parse_mdpr), (gst_rmdemux_parse_packet):
When operating in pull mode, post an error message on the
bus when all source pads are unlinked or some other fatal
error occured (#323023). Regrade some recurring debug messages
to LOG level. Convert c++-style comments into C-style ones.
Original commit message from CVS:
Patch by: Michal Benes <michal dot benes at xeris dot cz>
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_init),
(gst_mpeg_demux_parse_packet), (gst_mpeg_demux_parse_pes),
(gst_mpeg_demux_send_subbuffer), (gst_mpeg_demux_reset):
* gst/mpegstream/gstmpegdemux.h:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_parse_packhead):
Timestamps in mpeg stream are 32-bit numbers. Therefore, with a
clock_freq of 90kHz this timestamp overflows every ~13 hours. This
situation really happens when grabbing DVB streams. Current
mpegdemuxer can not handle this situation correctly and it
restarts counting gstreamer timestamps from zero.
Fixes#326598.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_sink_event),
(gst_a52dec_chain_raw), (gst_a52dec_change_state):
* ext/a52dec/gsta52dec.h:
Fix#334550: failure to play raw AC3 files due to segment problems.
Original commit message from CVS:
* ext/mad/gstmad.c: (gst_mad_convert_sink), (gst_mad_update_info),
(gst_mad_sink_event), (gst_mad_change_state):
Include AUDIO_CODEC tag with tags posted if input is not
framed (#334258). Use _scale() util functions in more places.
Original commit message from CVS:
2006-03-12 Christophe Fergeau <teuf@gnome.org>
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* ext/lame/gstlame.c: (gst_lame_class_init): mark the xing-header
property as BROKEN (see
http://bugzilla.gnome.org/show_bug.cgi?id=330317#c19 for an
explanation why it's broken).
Original commit message from CVS:
2006-03-11 Christophe Fergeau <teuf@gnome.org>
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* configure.ac:
* gst/xingheader/Makefile.am:
* gst/xingheader/gstxingmux.c:
* gst/xingheader/gstxingmux.h: added new element to add Xing headers
to MP3 files (this allows decoder to figure out the length of VBR
files)
Original commit message from CVS:
* ext/mad/gstid3tag.c: (tag_list_to_id3_tag_foreach):
Add support for writing the GST_TAG_ALBUM_VOLUME_NUMBER
tag (#333683, patch by: Alex Lancaster).
Original commit message from CVS:
* ext/amrnb/amrnbdec.c: (gst_amrnbdec_init),
(gst_amrnbdec_setcaps), (gst_amrnbdec_chain),
(gst_amrnbdec_state_change):
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_init),
(gst_amrnbenc_setcaps), (gst_amrnbenc_chain),
(gst_amrnbenc_state_change):
* ext/amrnb/amrnbenc.h:
* ext/amrnb/amrnbparse.c: (gst_amrnbparse_init),
(gst_amrnbparse_query):
Further fancyfication.
Use _take to get writable data from the adapter.
Precalc packet duration.
Handle disconts.
Forward _push to upstream.
Post error messages when something goes wrong.
Remove old code in amrnbparse.
Don't ignore query results from upstream.
Original commit message from CVS:
* ext/amrnb/amrnbenc.c: (gst_amrnbenc_chain):
The AMR encoder writes into the audio buffers it processes, so
use gst_buffer_make_writable() on buffers we might (they go through
an adapter, so there can be copying going on later anyway) be
encoding.
Original commit message from CVS:
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_pad_added),
(gst_mpeg_parse_handle_src_query):
Declare variables at the beginning of a block and make
gcc-2.9x happy (fixes#328957; patch by: Jens Granseuer).
Original commit message from CVS:
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_handle_data):
Read packet size, sequence and padsize in right order again
(fixes#332796; patch by: Fabrizio Gennari).
Original commit message from CVS:
* configure.ac:
Make the id3tag and mad checks check for both a header and the
appropriate library if the pkg-config is missing. (Closes#331842)
Split the id3tag and mad checks into 2 pieces. Sometime soon I might
do the same for the plugins themselves.
Original commit message from CVS:
Reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* ext/mpeg2dec/gstmpeg2dec.c: (gst_mpeg2dec_init),
(gst_mpeg2dec_reset), (gst_mpeg2dec_chain):
* ext/mpeg2dec/gstmpeg2dec.h:
Don't treat STATE_INVALID as fatal error; throw an error
only after five consecutive decoding errors. Makes decoding
mpeg streams more robust and fixes playback of joined clips
(#300682).
