Commit graph

17178 commits

Author SHA1 Message Date
Edward Hervey
770bb07f30 souphttpsrc: Fix seeking back to 0
This is a regression introduced by "03db374 - souphttpsrc: retry
request on early termination from the server"

The problem was that when seeking back to 0, we would not end up calling
add_range_header() which in addition to adding range headers *ALSO* sets
the read_position to the requested one.

This would result in a wide variety of later failures, like reading
again and again instead of stopping properly.
2017-11-08 16:34:01 +01:00
Seungha Yang
5dd39d8946 matroskademux: Add parsing Colour element
... and forward colorimetry to downstream. The Colour element describes
various color information (similar to 'colr' box in isobmff).
Note that, due to the comparatively limited syntax for color information
in vpx codecs, the color information in mkv/wemb container level
should be used for sophisticated color handling (e.g., HDR video).

https://bugzilla.gnome.org/show_bug.cgi?id=790023
2017-11-08 11:01:55 +02:00
Jan Alexander Steffens (heftig)
7e4bc6d418 v4l2deviceprovider: Ignore touch sensing devices
With GST_V4L2_USE_LIBV4L2=1, my laptop's touchpad shows up as a video
source device in gst-device-monitor, but attempting to stream from it
fails because the device doesn't actually support any video formats.

name  : Synaptics RMI4 Touch Sensor
class : Video/Source
caps  : video/x-raw, format=(string)I420, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1;
        video/x-raw, format=(string)YV12, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1;
        video/x-raw, format=(string)BGR, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1;
        video/x-raw, format=(string)RGB, framerate=(fraction)[ 0/1, 2147483647/1 ], width=(int)0, height=(int)0, interlace-mode=(string)progressive, pixel-aspect-ratio=(fraction)1/1;
properties:
        udev-probed = true
        device.bus_path = /sys/devices/rmi4-00/rmi4-00.fn54/video4linux/v4l-touch0
        sysfs.path = /sys/devices/rmi4-00/rmi4-00.fn54/video4linux/v4l-touch0
        device.subsystem = video4linux
        device.product.name = "Synaptics\ RMI4\ Touch\ Sensor"
        device.capabilities = :capture:
        device.api = v4l2
        device.path = /dev/v4l-touch0
        v4l2.device.driver = rmi4_f54
        v4l2.device.card = "Synaptics\ RMI4\ Touch\ Sensor"
        v4l2.device.bus_info = rmi4:rmi4-00.fn54
        v4l2.device.version = 265480 (0x00040d08)
        v4l2.device.capabilities = 2501902337 (0x95200001)
        v4l2.device.device_caps = 354418689 (0x15200001)
gst-launch-1.0 v4l2src device=/dev/v4l-touch0 ! ...

v4l2-ctl -d /dev/v4l-touch0 --list-formats reports:

ioctl: VIDIOC_ENUM_FMT
        Index       : 0
        Type        : Video Capture
        Pixel Format: 'TD16'
        Name        : 16-bit signed deltas

        Index       : 1
        Type        : Video Capture
        Pixel Format: 'TD08'
        Name        : 8-bit signed deltas

        Index       : 2
        Type        : Video Capture
        Pixel Format: 'TU16'
        Name        : 16-bit unsigned touch data

https://bugzilla.gnome.org/show_bug.cgi?id=789197
2017-11-06 19:34:22 -05:00
Youness Alaoui
593615de46 rtpg722pay: Add encoding-params to the src caps template
The G722 payload only accepts G722 audio with channels=1, so it must
specify the encoding-params=1 in its src caps, otherwise it causes issues
with farstream which thinks it supports 2 channels G722 and when
confronted with a remote that has G722/8000/2, it will negotiate it
and error out with a not-negotiated when the caps don't intersect
at runtime.

https://bugzilla.gnome.org/show_bug.cgi?id=789878
2017-11-03 17:20:31 -04:00
Nicolas Dufresne
57d7ae8496 v4l2allocator: Add support for data_offset
In MPLANE mode, the driver may set data_offset, which represent some
padding at the start of the buffer used internally. This portion of the
data need to be skipped, though it is included in bytesused.

This patch removes frame size sanity check as the method used will no
longer work. This check was simply there to help detect broken kernel
drivers. It would be re-implement by estimating the plane size, which is
not totally trivial and may be too much work for a simple debug check.

https://bugzilla.gnome.org/show_bug.cgi?id=733501
2017-11-03 15:47:11 -04:00
Sebastian Dröge
af3ce874a0 rtspsrc: Add "accept-certificate" signal for manually checking a TLS certificate for validity
https://bugzilla.gnome.org/show_bug.cgi?id=785024
2017-11-01 13:42:45 +02:00
Sangkyu Park
257f7c9063 rtspsrc: Print RTSP/SDP messages to gstreamer log instead of stdout
- 'debug' property is deprecated
- All RTSP messages are printed to gstreamer log with 'log' level.

https://bugzilla.gnome.org/show_bug.cgi?id=788917
2017-11-01 11:35:44 +02:00
Justin Kim
2a5aafe425 rtpsesson: downgrade message level to debug when detected XR
When XR packet is detected, warning message leads to misunderstandings.
Until RFC3611 is implemented in gst-plugins-base, the level needs to
be downgraded to avoid confusion.

https://bugzilla.gnome.org/show_bug.cgi?id=789746
2017-11-01 10:57:00 +02:00
Ashish Kumar
1aed3948a8 gst-plugins-good: atoms_recovery: Handled buffer mapping failure
https://bugzilla.gnome.org/show_bug.cgi?id=789413
2017-10-24 22:04:27 -07:00
Thiago Santos
923b83a48c atomsrecovery: read from mdat only what is on headers
It is possible that the mdat has more data than what was stored in the
headers file. If we put that to the output the file will have bogus data
at the end and some players will complain.

https://bugzilla.gnome.org/show_bug.cgi?id=784258
2017-10-24 21:33:25 -07:00
Thiago Santos
69605b6c61 isomp4: atomsrecovery: handle common and large atom headers
Do not assume all files are large files. Check and use the short or
extended atom size field only if needed.

https://bugzilla.gnome.org/show_bug.cgi?id=784258
2017-10-24 21:33:25 -07:00
Andreas Frisch
39785d9cc3 pngdec: fix build with libpng versions between 1.2 and 1.5.1 (revised)
https://bugzilla.gnome.org/show_bug.cgi?id=765927
2017-10-20 11:47:57 +02:00
Andreas Frisch
5615ec59c4 pngdec: fix build with libpng versions between 1.2 and 1.5.1
https://bugzilla.gnome.org/show_bug.cgi?id=765927
2017-10-20 09:31:31 +02:00
Andreas Frisch
9fd988170a pngdec: Extract icc profiles and send them downstreams for colormanagement elements
https://bugzilla.gnome.org/show_bug.cgi?id=765927
2017-10-19 16:49:10 +02:00
Thibault Saunier
6d72ae13fe rtsp: Add missing Since marker 2017-10-16 14:21:56 +02:00
Mathieu Duponchelle
c7a172517d gstgdkpixbufdec: stop pretending to decode gifs.
If you can't decode an animated gif, you can't decode a gif,
so stop squatting GST_RANK_SECONDARY for that format, libav
does a better job.

https://bugzilla.gnome.org/show_bug.cgi?id=784683
2017-10-12 22:02:04 +02:00
Philippe Renon
09af01a088 directsoundsink: simplify how DirecSoundBuffer is cleared
we always want to clear the whole buffer so no need to
start from offset even if the offset is always zero.

https://bugzilla.gnome.org/show_bug.cgi?id=788847
2017-10-12 10:32:34 +03:00
Philippe Renon
24561309f9 directsoundsink: fix comment
https://bugzilla.gnome.org/show_bug.cgi?id=788847
2017-10-12 10:32:34 +03:00
Philippe Renon
73993149ec directsoundsink: don't call set_volume with private scaled volume
use get_volume() instead to get unscaled volume

https://bugzilla.gnome.org/show_bug.cgi?id=788847
2017-10-12 10:32:34 +03:00
Philippe Renon
d519d14ad9 directsoundsink: remove duplicate volume initialization
https://bugzilla.gnome.org/show_bug.cgi?id=788847
2017-10-12 10:32:34 +03:00
Sebastian Dröge
728a1629cf qtdemux: Fix compiler warning
qtdemux.c: In function ‘gst_qtdemux_configure_stream’:
qtdemux.c:7764:34: error: suggest parentheses around ‘&&’ within ‘||’ [-Werror=parentheses]
     if ((stream->n_samples == 1) && (stream->first_duration == 0)
         ~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2017-10-10 18:04:50 +03:00
Nael Ouedraogo
5874bafa4f qtdemux: fix assert when moof containing one sample
Avoid computing frame rate when a stream contain moof with only one
sample, to avoid an assert. The moof is considered as still picture.

The same is already done for one sample given in the moov.

https://bugzilla.gnome.org/show_bug.cgi?id=782217
2017-10-10 18:03:42 +03:00
Thibault Saunier
fb952e3470 rtspsrc: Avoid potentially dereferencing NULL pointer
CID 1418986
2017-10-09 14:39:14 +02:00
Tim-Philipp Müller
6cb51bd8cf rtpjitterbuffer: fix debug message on pt mismatch 2017-10-08 00:07:43 +01:00
Nicolas Dufresne
33e595b41c v4l2videoenc: Fix driver capability dectection
Use the right set of caps when checking if caps intersect. That makes
the check only select the supported devices.
2017-10-07 17:33:41 -04:00
Nicolas Dufresne
cebb5baaa6 v4l2videoenc/dec: Don't leak template caps 2017-10-07 17:33:41 -04:00
Nicolas Dufresne
9ad90f3bf2 v4l2videodec: Protect against null pool in _stop
This may happen if the negotiation fails, as we will have never
created the pools.
2017-10-07 17:33:41 -04:00
Tim-Philipp Müller
d5f72418c8 rtpbin, rtspsrc: fix compiler warnings about 64-bit integer signednes
"warning: this decimal constant is unsigned only in ISO C90" with
gcc 4.8.4 (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.3)
2017-10-07 15:55:24 +01:00
Tim-Philipp Müller
97285753fc v4l2: fix build without libv4l
https://bugzilla.gnome.org/show_bug.cgi?id=779466
2017-10-07 15:39:47 +01:00
Sebastian Dröge
263494f9c7 rtpsbcdepay: Fix potential NULL pointer dereference
CID 1418864
2017-10-07 14:06:38 +03:00
Sebastian Dröge
7d80fa4bbf audioecho: Micro-optimize
Gives 1.28x speedup in surround-delay=false mode
2017-10-07 03:03:46 +03:00
Sebastian Dröge
ad062e1879 audioecho: Don't do linear interpolation between samples
Linear interpolation adds quite some noise, and it's unlikely that
anybody will ever need sub-sample accurate delays. Proper resampling
before that will lead to better results.
2017-10-07 03:03:46 +03:00
Enrico Jorns
e9c00c083b v4l2object: auto-detect dmabuf export for V4L2_IO_AUTO on capture side
Issue an invalid VIDIOC_EXPBUF ioctl to the driver to check if the
driver supports dmabuf export. If the driver does not implement the
IOCTL, the error is ENOTTY. Any other error codes mean that the driver
implements VIDIOC_EXPBUF.

https://bugzilla.gnome.org/show_bug.cgi?id=779466
2017-10-05 21:20:19 -04:00
Nicolas Dufresne
986f3e15b2 flvdemux: Only set pixel-aspect-ratio if specified
If it's not specified, we should let the decoder figure it out.
Apparently the code was already in place, all was to make the code
conditional.

https://bugzilla.gnome.org/show_bug.cgi?id=787795
2017-10-05 21:20:19 -04:00
Nicolas Dufresne
307018da89 flvdemux: Don't pull passed the EOS
When a truncated FLV is provided and processed in pull mode, we
may endup trying to pull passed EOS, causing a rather confusing
warning as the pull offset is an integer overflow.

https://bugzilla.gnome.org/show_bug.cgi?id=787795
2017-10-05 21:20:19 -04:00
Nicolas Dufresne
cfc1638ca5 flvdemux: Ignore invalid H.264 codec data
This code basically skip over codec_data with empty payload. In
this case, the codec_data variable is the size of the header for
the CODEC part of Video Tag. The remaining is supposed to be the
H.264 codec data, hence should not be empty.

https://bugzilla.gnome.org/show_bug.cgi?id=787795
2017-10-05 21:20:19 -04:00
Nicolas Dufresne
18dbd49fb8 flvdemux: Avoid integer overflow on invalid CTS
If the CTS is negative an would lead to a negtive PTS, clip
the CTS so the PTS will be 0.

https://bugzilla.gnome.org/show_bug.cgi?id=787795
2017-10-05 21:20:19 -04:00
Thibault Saunier
9759283612 docs: Update for git changes 2017-10-05 14:37:54 -03:00
Thibault Saunier
125e835045 rtspsrc: Fix build 2017-10-05 14:37:54 -03:00
Thibault Saunier
ffcd173c09 rtspsrc: Handle TCP as lower transport with RTSP 2.0
Meaning that the interleave fields have to be updated as
if streams setup was working when using pipelined setup
request. Otherwise there is a mismatch between the server
channel count and our own.

This also makes RTSP 2.0 over HTTP working.

https://bugzilla.gnome.org/show_bug.cgi?id=781446
2017-10-05 12:05:40 -03:00
Thibault Saunier
8121752887 rtsp: Start implementing support for RTSP 2.0
- Handle version negotation:

  Added a `default-version` property so that the user can configure
  what to use in case the server does not support version negotation
  (which actually exist)

- Handle pipelined requests, which allow avoiding full round trip to
  setup the RTP streams (request are sent in a raw, and response are
  handled as they arrive).

- Handle the new Media-Properties header

- Handle the new Seek-Style header

- Handle the new Accept-Ranges header

Handling of IPV6 should already be OK.

We are still missing (at least) the following features (which do not
seem really mandatory as they require a "persistent connection between
server and client"):

  - Server to Client TEARDOWN command (Not so usefull fmpov)
  - PLAY_NOTIFY (not needed for our server yet)
  - Support for the new REDIRECT features

and probably some more protocol changes might not be handled yet.

https://bugzilla.gnome.org/show_bug.cgi?id=781446
2017-10-05 12:05:40 -03:00
Thibault Saunier
5faad79049 rtspsrc: Use a macro to debug RTSP messages
Simplifying the code a little.

https://bugzilla.gnome.org/show_bug.cgi?id=781446
2017-10-05 12:05:39 -03:00
Reynaldo H. Verdejo Pinochet
0ddb65dec7 Use proper GtkDoc notation for NULL/FALSE/TRUE 2017-10-03 16:30:10 -07:00
Sebastian Dröge
26cf8c1dc9 rtspsrc: Ignore medias marked as sendonly
We're never going to receive anything from them, so don't create pads
for them. These medias are destinations where *we* could send something.
2017-10-01 16:09:13 +02:00
Sebastian Dröge
58f0eabd61 sbcdepay: Add property to ignore input timestamps
This then just counts samples and calculates the output timestamps based
on that and the very first observed timestamp. The timestamps on the
buffers are continued to be used to detect discontinuities that are too
big and reset the counter at that point.

When receiving data via Bluetooth, many devices put completely wrong
values into the RTP timestamp field. For example iOS seems to put a
timestamp in milliseconds in there, instead of something based on the
current sample offset (RTP clock-rate == sample rate).

https://bugzilla.gnome.org/show_bug.cgi?id=787297
2017-09-28 14:15:12 +03:00
Ponnam Srinivas
c0622addf6 rtph265depay: Fix Memory leak in error case
https://bugzilla.gnome.org/show_bug.cgi?id=787937
2017-09-26 11:09:53 +03:00
Deepak Srivastava
49ed67c4f2 deinterlace: Fixed memory leak in error code path
https://bugzilla.gnome.org/show_bug.cgi?id=788041
2017-09-22 17:25:50 +03:00
Ponnam Srinivas
c53bee067d pngenc: fix memory leak in error code path
Don't leak row_pointers if frame can't be mapped.

https://bugzilla.gnome.org/show_bug.cgi?id=787885
2017-09-20 09:00:10 +01:00
Nicolas Dufresne
fb26575b73 v4l2videodec: Don't leak codec name 2017-09-19 17:55:58 -04:00
Nicolas Dufresne
1f902e2f6e v4l2bufferpool: Don't stop streaming when pool is flushing
The purpose of being able to flush the buffer pool is only to
unlock any blocked operation. Doing streamoff/streamon had the
side effect of turning off and on the camera. As we do a flush_start
/ flush_stop sequence when shutting down, that would cause a really
quick sequence of streamoff/streamon/streamoff/close which was
causing some cameras to stop working.

https://bugzilla.gnome.org/show_bug.cgi?id=783945
2017-09-19 17:33:35 -04:00