Commit graph

15914 commits

Author SHA1 Message Date
Sebastian Dröge
707c69cb72 Revert "qtdemux: expose streams with first moof for fragmented format"
This reverts commit d8bb6687ea.

https://bugzilla.gnome.org/show_bug.cgi?id=764733
2016-04-21 12:53:33 +03:00
Alex Ashley
0c4cc14533 qtdemux: support seeking of CENC encrypted streams
When playing a stream that has been protected by DASH CENC, playback
will fail if a seek is performed. Qtdemux produces the error "stream
is protected using cenc, but no cenc protection system information
has been found" and playback stops.

The problem is that gst_qtdemux_reset() gets called as part of the
FLUSH during a seek. This function frees the protection_system_ids
array. When gst_qtdemux_configure_protected_caps() is called after the
seek has completed, the protection_system_ids array is empty and
qtdemux is unable to create the correct output caps for the protected
stream.

This commit changes it to only free the protection_system_ids on
hard resets.

https://bugzilla.gnome.org/show_bug.cgi?id=761787
2016-04-20 12:19:51 -03:00
Tim-Philipp Müller
76506190e9 udpsrc: add "retrieve-sender-address" property
This allows disabling of sender address retrieval, which might
be useful in certain scenarios, like when the socket is connected,
or the sender address is not of interest (e.g. when receiving an
MPEG-TS stream). Disabling sender address retrieval in those
cases can have minor performance advantages.

https://bugzilla.gnome.org/show_bug.cgi?id=563323
2016-04-18 14:33:10 +01:00
Dimitrios Katsaros
df9eed0ab5 v4l2: Change warning handling to break infinite message loop
v4l2src can cause an "infinite message loop" when a base control exposed as a
property is not provided by the device. In these cases, if in the warning message
handling for the bus, the GST_DEBUG_BIN_TO_DOT_FILE* category of functions are used,
the src lookup causes a new warning to be posted on the bus, causing a loop.

This patch changes the warning for these controls so they are not posted on the bus.

https://bugzilla.gnome.org/show_bug.cgi?id=758703
2016-04-16 16:36:25 -04:00
Xavier Claessens
7886e8d8a0 spitmuxsink: Avoid creating small file at EOS
When EOS is reached, the current file get closed and the last
GOP in the mq was written in a new file.

https://bugzilla.gnome.org/show_bug.cgi?id=765072
2016-04-16 22:14:37 +10:00
Sebastian Dröge
2dee0e385f scaletempo: S16 uses S32 temporary buffers, float/double their own type
Make sure to allocate not only a S16 buffer for S16 but a twice as big one to
hold S32.

https://bugzilla.gnome.org/show_bug.cgi?id=765116
2016-04-15 20:06:42 +03:00
Jan Schmidt
46a3c9ac8b Revert "pulsesink: uncork if needed upon commit"
This reverts commit 0dd46accf6.

With some audiosinks, starting the ringbuffer on the first commit
causes audio glitches at startup by starting to output segments
from the ringbuffer before it has been filled / fully prerolled. This
doesn't usually happen with pulsesink because we map the pulseaudio
ringbuffer directly, but we should keep things consistent with
other sinks with regards to startup latency, plus it gives more
headway to avoid glitching, should the initial 2nd segment take
more than 10ms to generate.

https://bugzilla.gnome.org/show_bug.cgi?id=657076
2016-04-16 02:21:14 +10:00
Aleix Conchillo Flaqué
c36930535d rtspsrc: add srtp rollover counters from mikey crypto sessions
The server can send multiple crypto sessions, one for each SSRC with its
own rollover counter. We parse this information and pass it to the SRTP
decoder via the "request-key" signal.

https://bugzilla.gnome.org/show_bug.cgi?id=730540
2016-04-15 18:12:06 +02:00
Jan Schmidt
a660ac7e88 rtpjitterbuffer: Fix debug output when resyncing
Don't output the pointer value of the time() function as a timestamp
by using the correct variable.

Fixes build on Raspberry Pi 3.
2016-04-15 14:35:07 +00:00
Sebastian Dröge
bc2d4c4c31 souphttpclientsink: If no proxy is set by properties, use the default libsoup proxy resolver
That is, use whatever system settings there might exist. This is the same
behaviour we use in the HTTP source.
2016-04-15 11:36:36 +03:00
Julien Isorce
eab6b1326c Automatic update of common submodule
From 6f2d209 to ac2f647
2016-04-14 10:01:28 +01:00
Damian Ziobro
ae4484c2ba splitmuxsink: Add max_files_number property
https://bugzilla.gnome.org/show_bug.cgi?id=744612
2016-04-14 04:18:11 +10:00
Reynaldo H. Verdejo Pinochet
6b209acf28 videomixer: drop reference to videomixer 2
Fix a small grammar mistake on "overlayed" while at it.
2016-04-13 10:57:03 -07:00
Sebastian Dröge
4103f3d7f3 ximage: Initialize all fields in the meta explicitly
The meta is not allocated with all fields initialized to zeroes.

https://bugzilla.gnome.org/show_bug.cgi?id=764902
2016-04-13 09:57:16 +03:00
Paolo Pettinato
40fbffc208 rtpmux: Forward sticky events on buffer lists too, not only on buffers
https://bugzilla.gnome.org/show_bug.cgi?id=764933
2016-04-12 15:22:14 +03:00
Sebastian Dröge
1f21747cc5 deinterlace: Drain the field history if the caps are changing
Otherwise we will use fields from the old caps with everything set up for the
new caps, causing crashes and worse.

Also don't do anything if the same caps are set twice.
2016-04-12 15:01:28 +03:00
Sebastian Dröge
0c84b1b104 deinterlace: Instead of confusing crashes later, just error out immediately if mapping a video frame fails
This probably still crashes but at least we get some hint about what goes
wrong instead of random behaviour later.
2016-04-12 15:00:31 +03:00
Luis de Bethencourt
1bb9d9c682 qtdemux: check stream is available in PIFF parser
qtdemux->streams is an array, it will never evaluate to true when comparing
to NULL. Instead we want to check the number of streams to make sure the
stream is available.

https://bugzilla.gnome.org/show_bug.cgi?id=753614
CID 1358389
2016-04-12 11:39:48 +01:00
Luis de Bethencourt
574bf8e02f Revert "qtdemux: redundant check in PIFF parser"
This reverts commit 41e10524f3.
2016-04-12 11:37:36 +01:00
Luis de Bethencourt
41e10524f3 qtdemux: redundant check in PIFF parser
qtdemux->streams is an array of size GST_QTDEMUX_MAX_STREAMS, it will never
evaluate to true when comparing to NULL.

https://bugzilla.gnome.org/show_bug.cgi?id=753614
CID 1358389
2016-04-12 11:08:37 +01:00
Wim Taymans
c9c051d53d v4l2: avoid leaking GValues
unset the GValue if we don't use it any more to avoid leaks.
2016-04-12 11:56:08 +02:00
Sebastian Dröge
4a0de53cc1 rtpjitterbuffer: Fix rtp_jitter_buffer_get_ts_diff() fill level calculation
The head of the queue is the oldest packet (as in lowest seqnum), the tail is
the newest packet. To calculate the fill level, we should calculate tail-head
while considering wraparounds. Not the other way around.

Other code is already doing this in the correct order.

https://bugzilla.gnome.org/show_bug.cgi?id=764889
2016-04-12 10:17:57 +03:00
Sebastian Dröge
95dc198563 rtpmanager: It's GST_LIBS, not GST_LIBS_LIBS 2016-04-11 10:44:56 +03:00
Seungha Yang
faa664b8ea qtdemux: Fix parsing segment duration of empty edit list box
For empty edit list, segment-duration in edit list box should not be
used for segment event.

https://bugzilla.gnome.org/show_bug.cgi?id=764870
2016-04-11 10:28:07 +03:00
Nicola Murino
cbdbfc8902 matroskamux: make timecodescale configurable
In some use cases the default timecodescale will produce blocks with the same timestamp

https://bugzilla.gnome.org/show_bug.cgi?id=764769
2016-04-11 10:17:25 +03:00
Edward Hervey
5fa1c2ba59 jiterbuffer: Move assertion to the right location
We shouldn't have "late" lost timers at that point
2016-04-07 13:01:52 +02:00
Edward Hervey
b82da62922 jitterbuffer: Speed up lost timeout handling
When downstream blocks, "lost" timers are created to notify the
outgoing thread that packets are lost.

The problem is that for high packet-rate streams, we might end up with
a big list of lost timeouts (had a use-case with ~1000...).

The problem isn't so much the amount of lost timeouts to handle, but
rather the way they were handled. All timers would first be iterated,
then the one selected would be handled ... to re-iterate the list again.

All of this is being done while the jbuf lock is taken, which in some use-cases
would return in holding that lock for 10s... blocking any buffers from
being accepted in input... which would then arrive late ... which would
create plenty of lost timers ... which would cause the same issue.

In order to avoid that situation, handle the lost timers immediately when
iterating the list of pending timers. This modifies the complexity from
a quadratic to a linear complexity.

https://bugzilla.gnome.org/show_bug.cgi?id=762988
2016-04-07 10:14:24 +02:00
Edward Hervey
d656fe8d54 jitterbuffer: Don't create lost events if we don't need them
When "do-lost" is set to FALSE we don't use/send the lost events.
In that case, don't create them to start with :)

https://bugzilla.gnome.org/show_bug.cgi?id=762988
2016-04-07 10:13:56 +02:00
Edward Hervey
cf866a8469 jitterbuffer: Add tracing of lock usage
Helps with debugging lock usage

https://bugzilla.gnome.org/show_bug.cgi?id=762988
2016-04-07 10:06:18 +02:00
Nirbheek Chauhan
a5369c6be3 v4l2: Don't leak v4l2 objects and props on probe errors 2016-04-04 20:31:43 +01:00
Tim-Philipp Müller
03e2655f70 tests: add unit test for jpeg depayloader packet loss handling
Make sure it always outputs something that looks like a valid
JPEG frame, ie. starts with an SOI marker and ends with an EOI
marker.
2016-04-04 17:42:03 +01:00
Nirbheek Chauhan
e20a687737 rtpjpegdepay: Don't send invalid frames downstream after packet loss or a DISCONT
After clearing the adapter due to a DISCONT, as might happen when some packet(s)
have been lost, the depayloader was pushing data into the adapter (which had no
header due to the clear), creating a headerless frame out of it, and sending it
downstream. The downstream decoder would then usually ignore it; unless there
were lots of DISCONTs from the jitterbuffer in which case the decoder would reach
its max_errors limit and throw an element error. Now we just discard that data.

It is probaby not worth trying to salvage this data because non-progressive
jpeg does not degrade gracefully and makes the video unwatchable even with
low packet loss such as 3-5%.
2016-04-04 17:40:11 +01:00
Sebastian Dröge
df247f091c rtpjitterbuffer: Add RFC7273 media clock handling
https://bugzilla.gnome.org/show_bug.cgi?id=762259
2016-04-03 11:24:34 +03:00
Philippe Normand
fd7964e746 qtdemux: PIFF box detection and parsing support
The PIFF data is stored in a custom UUID box which is parsed and the
crypto_info of the element is updated accordingly. This allows
downstream decryptors to process and decrypt the protected content.

https://bugzilla.gnome.org/show_bug.cgi?id=753614
2016-04-02 18:01:10 +01:00
Luis de Bethencourt
4b7e377d25 rtpvorbisdepay: remove dead code
payload_buffer hasn't been assigned a value before the jumps to
switch_failed or packet_short. So the value must be NULL. No need
to unmap and unref.

CID #1316476
2016-04-01 12:15:58 +01:00
Luis de Bethencourt
6a16be75bf rtph263pay: fix leak
Free memory of current macroblock once it isn't needed so it isn't leaked
by the call of the gst_rtp_h263_pay_B_mbfinder function.
if (!(mac = gst_rtp_h263_pay_B_mbfinder (context, gob, mac, mb))) {

CID 1212156
2016-03-31 15:25:17 +01:00
Jan Schmidt
41d2b6f19e splitmux: Handle a hang draining out at EOS
Make sure that all data is drained out when the reference pad
goes EOS. Fixes a problem where data that arrives on other
pads after the reference pad finishes can stall forever and
never pass EOS.

https://bugzilla.gnome.org/show_bug.cgi?id=763711
2016-04-01 00:48:05 +11:00
Xavier Claessens
fb835c100a splitmuxsink: Fix occasional deadlock when ending file with subtitle
Deadlock occurs when splitting files if one stream received no buffer during
the first GOP of the next file. That can happen in that scenario for example:
 1) The first GOP of video is collected, it has a duration of 10s.
    max_in_running_time is set to 10s.
 2) Other streams catchup and we receive the first subtitle buffer at ts=0 and
    has a duration of 1min.
 3) We receive the 2nd subtitle buffer with a ts=1min. in_running_time is set to
    1min. That buffer is blocked in handle_mq_input() because
    max_in_running_time is still 10s.
 4) Since all in_running_time are now > 10s, max_out_running_time is now set to
    10s. That first GOP gets recorded into the file. The muxer pop buffers out
    of the mq, when it tries to pop a 2nd subtitle buffer it blocks because the
    GstDataQueue is empty.
 5) A 2nd GOP of video is collected and has a duration of 10s as well.
    max_in_running_time is now 20s. Since subtitle's in_running_time is already
    1min, that GOP is already complete.
 6) But let's say we overran the max file size, we thus set state to
    SPLITMUX_STATE_ENDING_FILE now. As soon as a buffer with ts > 10s (end of
    previous GOP) arrives in handle_mq_output(), EOS event is sent downstream
    instead. But since the subtitle queue is empty, that's never going to
    happen. Pipeline is now deadlocked.

To fix this situation we have to:
 - Send a dummy event through the queue to wakeup output thread.
 - Update out_running_time to at least max_out_running_time so it sends EOS.
 - Respect time order, so we set out_running_tim=max_in_running_time because
   that's bigger than previous buffer and smaller than next.

https://bugzilla.gnome.org/show_bug.cgi?id=763711
2016-04-01 00:48:05 +11:00
Stian Selnes
4c0e509328 rtpsession: Add new signal 'on-app-rtcp'
Similar to the 'on-feedback-rtcp' signal, but emitted for RTCP APP
packets.

https://bugzilla.gnome.org/show_bug.cgi?id=762217
2016-03-30 15:42:01 +03:00
Minjae Kim
eb13a1d607 rtpmanager: Set to initial value for 'ntpns' in get_current_times()
Initialize "ntpns" variable to -1 as the OE compiler for some reason doesn't
realize that the variable is set in all code paths.

https://bugzilla.gnome.org/show_bug.cgi?id=764119
2016-03-29 10:21:07 +03:00
Sebastian Dröge
3549aa7924 rtpjpegpay: Allow different quantization tables for components 2 and 3
RFC 2435 mentions in section 4.1 that U/V use table number 1, but this seems
just like an example. Some encoders are not following that and there seems to
be no reason to reject their streams.

https://bugzilla.gnome.org/show_bug.cgi?id=761345
2016-03-25 12:52:56 +02:00
Nicolas Dufresne
284d723a9a vpxdec: Use threads on multi-core systems
This is a redo of commit b848c1b6ff. The
code was lost when the elements where ported to use a baseclass.

https://bugzilla.gnome.org/show_bug.cgi?id=764169
2016-03-24 19:30:44 -04:00
Thiago Santos
d738fa0787 splitmuxsink: only try to create internal sink if it doesn't exist
This allows splitmuxsink to be reused after being put to NULL.

Test included

https://bugzilla.gnome.org/show_bug.cgi?id=762893
2016-03-24 20:10:25 -03:00
Aurélien Zanelli
c163250f0d v4l2object: probe all colorspace supported by device
A device can support more than one colorspace for a given image
dimension and pixel format. So we have to probe all the supported
colorspace and not only rely on the default one. Otherwise we could end
up with negotiation failure if the caps colorimetry field don't match
the v4l2 device default one even if the v4l2 could support such
colorimetry.

This patch enable probing if colorspace for both capture and output
device. It really makes sense for output device since the colorspace
shall be set by the application and a little less for capture device
which, at the moment, shall provide the colorspace; ie: the v4l2
specification seems to not take into account the fact that a capture
device could do colorspace conversion.

As a side effet, probing takes some times and so sligthly delay v4l2
initialization. Note that this patch only probe colorspace and not all
colorspace, matrix, transfer and range combination to avoid taking too
much time, especially with low-speed devices as full probing do 1782
ioctl.

https://bugzilla.gnome.org/show_bug.cgi?id=755937
2016-03-24 14:05:45 -04:00
Edward Hervey
c4f06420b3 check: Fix indentation 2016-03-24 16:22:31 +01:00
Edward Hervey
f0a27084f9 tests: Remove unused variables 2016-03-24 16:22:28 +01:00
Sebastian Dröge
239cf06d81 deinterleave: Return the current caps on the srcpads on caps queries
It's not like we could accept any other caps here. The caps are decided by the
upstream caps event.

Also keep the filter order intact when filtering the results against the
filter caps.

https://bugzilla.gnome.org/show_bug.cgi?id=763326
2016-03-24 14:47:40 +02:00
Jimmy Ohn
206e24855a qtdemux: Fix qtdemux memory leak in src_convert function
If we don't find the index of the sample correctly in src_convert function,
we have to unref about the qtdemux before returning value.
So, I have modify it about instead pass qtdemux as a parameter into
src_convert function.

https://bugzilla.gnome.org/show_bug.cgi?id=763973
2016-03-24 14:36:26 +02:00
Jimmy Ohn
c633f2aab7 qtdemux: Add check condition for fail case in get_duration function
Currently, get_duration function always return the TRUE even though
it can't be set duration correctly. So, we need to add the else condition
about the fail case. Also, we already set the GST_CLOCK_TIME_NONE
in this function. So I have modify it which is related code in some
function.

https://bugzilla.gnome.org/show_bug.cgi?id=763968
2016-03-24 14:35:47 +02:00
Jimmy Ohn
0ef9e6d139 qtdemux: Modify data type of duration in handle_src_query function
Data type of duration need to modify from guint64 to GstClockTime
for consistency in handle_src_query function.

https://bugzilla.gnome.org/show_bug.cgi?id=763965
2016-03-24 14:34:55 +02:00