The scenario where you have a gap in a steady flow of packets of
say 10 seconds (500 packets of with duration of 20ms), the jitterbuffer
will idle up until it receives the first buffer after the gap, but will
then go on to produce 499 lost-events, to "cover up" the gap.
Now this is obviously wrong, since the last possible time for the earliest
lost-events to be played out has obviously expired, but the fact that
the jitterbuffer has a "length", represented with its own latency combined
with the total latency downstream, allows for covering up at least some
of this gap.
So in the case of the "length" being 200ms, while having received packet
500, the jitterbuffer should still create a timeout for packet 491, which
will have its time expire at 10,02 seconds, specially since it might
actually arrive in time! But obviously, waiting for packet 100, that had
its time expire at 2 seconds, (remembering that the current time is 10)
is useless...
The patch will create one "big" lost-event for the first 490 packets,
and then go on to create single ones if they can reach their
playout deadline.
See https://bugzilla.gnome.org/show_bug.cgi?id=667838
Inform the source when caps changed. This was removed in the port to 1.0
leaving the source unaware of the clock-rate and unable to interpollate
rtp timestamps for SR packets.
When use-pipeline-clock is set, use the running-time of the
pipeline to calculate the NTP timestamps. This method would previously
only work when the base-time is set to 0 but with this change it can
also work with different offsets and we can also implement pause/resume
of the sender and receiver now.
Block the RTP pad and associated RTCP pads while they are being
announced. This it to prevent a race where one is announced and
before the callback has connected it, the other one gets a buffer.
We can't use the "padlock" of ssrcdemux because it causes deadlocks.
This prevents a deadlock where something would try to push an event
through the SSRC demux from the callback, causing the pads to be iterated
and the lock taken.
Add private replacements for deprecated functions such as
g_mutex_new(), g_mutex_free(), g_cond_new() etc., mostly
to avoid the deprecation warnings. We'll change these
over to the new API once we depend on glib >= 2.32.
... to at least having it trigger a/v synchronization, possibly without
using provided values which are still not considered sane
(as previously dropped).
... when operating in non slave mode, and reset if detected.
This should avoid some (large) bogus outgoing timestamp due to jumps
in rtp time, as result of PAUSE/PLAY or seek or ...
... at least if not syncing to NPT time:
* either sync using RTCP SR data (as currently)
* only perform the above once using initial RTCP SR packets
* discard RTCP and sync by equating provided stream's clock-base rtptime,
as provided by jitterbuffer (typically obtained from RTP-Info in RTSP).
We need to keep the lock held because we don't want a push before the "new-ssrc-pad"
handler has completed. But we may want to push an event from inside that handler, hence
the recursive mutex.
https://bugzilla.gnome.org/show_bug.cgi?id=650916
Using the current RTCP interval to timeout SSRC collision can lead to
collisions being timed out immediately if a BYE packet is sent because
it is sent immediately, so the interval is 0. This is not what we
want. So just set a static 10 times the default RTCP interval, it
should be enough
https://bugzilla.gnome.org/show_bug.cgi?id=648642
* use G_DEFINE_TYPE
* adjust to new GstBuffer and corresponding rtp and rtcp buffer interfaces
* misc caps and segment handling changes
FIXME: also relies on being able to pass caps along with a buffer,
which has no evident equivalent yet, so that either needs one,
or still needs quite some code path modification to drag along caps.
If the lock is not released before emitting a signal, it may cause a deadlock
if any other function in the element is called.
Also removed an unused timestamp parameter
https://bugzilla.gnome.org/show_bug.cgi?id=649617
GCC 4.6.x spits warnings about variables that are unused but set. Such
variables have been removed where trivial but with comments left behind
for informational purposes in some cases.
gst_rtp_session_chain_recv_rtcp () was changed in commit 490113d4
to always return GST_FLOW_OK instead of the return value of
rtp_session_process_rtcp (), so we'll keep it that way.
Remove the android/ top dir
Fixe the Makefile.am to be androgenized
To build gstreamer for android we are now using androgenizer which generates the needed Android.mk files.
Androgenizer can be found here: http://git.collabora.co.uk/?p=user/derek/androgenizer.git
1) We need to lock and get a strong ref to the parent, if still there.
2) If it has gone away, we need to handle that gracefully.
This is necessary in order to safely modify a running pipeline. Has been
observed when a streaming thread is doing a buffer_alloc() while an
application thread sends an event on a pad further downstream, and from
within a pad probe (holding STREAM_LOCK) carries out the pipeline plumbing
while the streaming thread has its buffer_alloc() in progress.
When using gstrtpbin with ignore-pt=true, the free_stream function tries to
call gst_element_set_locked_state and gst_element_set_state on a stream->demux
which is NULL.
fixes#642412
Functions that process the rtcp buffer could decide to keep a ref
on the buffer for further processing. So make the metadata writable
only after they are done.
Include all possible stats of a source in the stats structure because we might
be interested in what happened in the past.
Document the stats property and the fields.
When the jitterbuffer contains -1 timestamps, make sure we still calculate the
buffer fill level by skipping the -1 buffers.
Try to be more resilient to weird input timestamps.
since we are using the clock for sync, we need to also provide a clock for good
measure. The reason is that even if downstream elements provide a clock, we
don't want to have that clock selected because it might not be running yet.
Using _foreach_remove on the hashtable, while releasing the lock protecting
that table inside the callback is not a good idea. The hashtable might
then change (a source removed or added) while signals like on_timeout
are being sent.
This solution makes a copy of the table, performs the _foreach without
actually removing any sources, but marks them for removal on a second
iteration with the real list, but this time not letting go of the lock.
Fixes#630452
Holding internal locks while potentially calling out is a source
of deadlocks, and in this case the application might subscribe to the
pad-added signal.
Fixes#630449
If the source has been inactive for some time, we assume that it has
simply changed its transport source address. Hence, there is no true
third-party collision - only a simulated one.
Fixes#630447
Add an ntp-sync property that will sync the received streams to the server
NTP time. This requires synchronized NTP times between the sender and receivers,
like with ntpd.
Based on patch from Thijs Vermeir.
Fixes#627796
When using RTP_JITTER_BUFFER_MODE_BUFFER, make sure that the ringbuffer doesn't
get stuck buffering forever when there isn't enough data left to fill the
buffer.
Set ->active to TRUE in _init so it can be set to FALSE after creating the
jitterbuffer and it won't be mistakenly reset to TRUE in the change_state
function.
This is needed to start the jitterbuffer as inactive when rtpbin is buffering.
This just replaces every "$ERROR_CFLAGS" usage with a usage of
"$WARNING_CFLAGS $ERROR_CFLAGS" to get the same functionality as
previously.
Actually using that separation will happen later.
Add a "favor-new" property that tells the session to favor new sources when
there is a SSRC conflict. This is useful for SIP calls and other such cases
where a remote loop is extremely unlikely.
Fixes#607615
Use the length of the payload for estimating the receiver bitrate so that it
matches the calculations done on the sender side. Together with the number of
packets one can scale the bitrate with the header overhead of the lower
transport.
Don't reuse the same variable we need for stats for the bitrate estimation
because we're updating it.
Refactor the bitrate estimation code so that both sender and receivers use the
same code path.
Remove some code where we pass ntpnstime around, we can do most things with the
running_time just fine.
Rename a variable in the ArrivalStats struct so that it's clear that this is the
current system time.
Don't calculate the NTP time based on the running_time of the pipeline but from
the systemclock. This allows us to generate more accurate NTP timestamps in case
the systemclock is synchronized with NTP or similar.
If we detect backward timestamps on the server, don't try to resync when we
don't have an input timestamp (such as when using RTSP over TCP) instead, do
nothing but assume the timestamp was ok, it will correct itself when time goes
forwards.
There is no need to set the latency in the jittebuffer in _init, we will set
that later when going to PAUSED.
Set the jitterbuffer active and not buffering when starting.
When deactivating jitterbuffers when the buffering starts, keep the current
percent of the jitterbuffer and also set the jitterbuffer in the buffering state
so that we know when it's filled again.
Add property to get the buffering percentage of the jitterbuffer.
When we are in buffer mode, adjust the buffering low/high thresholds based on
the total configured latency. If we don't and there is a huge queue or element
with a big latency downstream we might drain the complete queue immediately and
start buffering again.
Return the next timestamp in the jitterbuffer.
Use the min-timestamp of the jitterbuffers to calculate an offset so that the
next timestamp is pushed with a timestamp equal to running_time.
Start producing timestamps from 0 in the buffering case too.
Keep track of the time we spend pausing the jitterbuffers when they were
buffering and distribute this elapsed time to the jitterbuffers.
Also keep the latency in nanosecond precision.
Pass the current running time to the jitterbuffer when pausing or resuming so
that it calculate the right offsets.
Small cleanups and comments.
Set the default rtspsrc latency to 2 seconds.
Add signal to pause the jitterbuffer. This will be emitted from gstrtpbin when
one of the jitterbuffers is buffering.
Make rtpbin collect the buffering messages and post a new buffering message with
the min value.
Remove the stats callback from jitterbuffer but pass a percent integer to
functions that affect the buffering state of the jitterbuffer. This allows us
then to post buffering messages from outside of the jitterbuffer lock.
Add callback for buffering stats.
Configure the latency in the jitterbuffer instead of passing it with _insert.
Calculate buffering levels when pushing and popping
Post buffering messages.
Don't make copied in the getter and setter for SDES in the RTPSource. This
avoids a couple of copies of the SDES structure when generating RTCP
packets.
We ref the buffer before pushing it downstream in order to get the CSRCs of it
after pushing. This causes performance problems when downstream elements want to
change the metadata because the buffer needs to be subbuffered.
Instead, read and store the CSRCs of the buffer in an array before pushing it
and process the array after pushing the buffer. This allows us to remove the
ref/unref pair.
Fixes#603376
Release the jbuf lock before emiting the request-pt-map signal to avoid
deadlocks. We also need to catch the shutdown case when locking again.
Fixes#593354
Add a parameter 'ignore-pt' that disables creating a gstrtpptdemux module and
ghosts the pads of gstrtpjitterbuffer instead of the ones of gstrtpptdemux.
Fixes#594490
When we receive a reordered packet with the same timestamp as the previous one
(which can happen for fragmented packets) don't consider the packet as lost but
instead wait for the reordered packet to arrive.
Switch the warning-level, so that a reordering does not get a warning, only
an actual produced lost-packet.
Fixes#594251
When receiving a sync-packet, all sessions with the same cname will be compared
and synced together. In this process, there could still be references to a
session that has been shut down in the meanwhile.
This patch makes sure that these references are removed when shutting down a
session, so that the syncing can be done safely.
Fixes#594283
The priv->clock_rate variable could become -1 between when its checked to not
be -1 and when its used, causing an assertion. Fixed by taking the mutex
earlier in the chain() function.
Fixes#593955
This reintroduces the fix for bug #593391. It also applies it in
gst_rtp_session_sync_rtcp() which has very similar code to
gst_rtp_session_send_rtcp().
When we construct a timestamp that would result in a timestamp that is earlier
than when the packet was received, reset the skew calculation as this is
probably a sign that the sender restarted or paused.
Fixes#593354
After a BYE packet from a source, stop forwarding the SR packets for lip-sync
to rtpbin. Some senders don't update their SR packets correctly after sending a
BYE and then we break lip-sync. We prefer to let the jitterbuffers drain with
the current lip-sync instead.
Connect to the pad-removed signal of the ptdemux elements so that we remove the
ghostpads for them. Fixes cleanup when going to NULL as well as when releasing
the sinkpads.
Fixes#561752
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
Free the session when all the request pads are released.
Don't mess with the session list in free_session as it is called from a foreach
on that list.
Set the state of the upstream element to NULL first.
See #561752
We usually only get SR packets in our chain function but if an invalid packet
contains the SR packet after the RR packet, we must not fail but simply ignore
the malformed packet.
Fixes#581375
Since neither rtpmanager nor any of the payloaders properly implement
pad allocation, there is no way for the rtpmanager to inform downstream elements
of the new SSRC if there is an SSRC collision. So the warning is emitted all the
time and it is confusing.
Fixes#580144
No short-desc as we have them in the element details.
Also keep things (Makefile.am and sections.txt) sorted.
Reword ambigous returns. No text after since please.
When the number of participants is less than 50, the RFC allows for sending the
BYE packet immediatly instead of using the regular BYE timeout.
Fixes#567828.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_setcaps_send_rtp), (create_send_rtp_sink):
* gst/rtpmanager/rtpsession.c: (rtp_session_set_internal_ssrc):
When an SSRC is found on the caps of the sender RTP, use this as the
internal SSRC. Fixes#565910.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_getcaps_send_rtp):
* gst/rtpmanager/rtpsession.c: (check_collision),
(rtp_session_schedule_bye_locked), (rtp_session_schedule_bye):
* gst/rtpmanager/rtpsession.h:
Rename a method to better reflect what it really does.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_getcaps_send_rtp):
Use method to get the internal SSRC.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_set_property), (rtp_session_get_property):
Add property to congiure the internal SSRC of the session.
Fixes#565910.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_set_internal_ssrc):
Only change the SSRC of the session and reset the internal source when
the SSRC actually changed. See #565910.
Original commit message from CVS:
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (get_clock_rate):
* gst/rtpmanager/rtpsource.h:
When no payload was specified on the caps but there was a clock-rate,
assume the clock-rate corresponds to the first payload type found in the
RTP packets. Fixes#565509.
Original commit message from CVS:
Patch by: Arnout Vandecappelle <arnout at mind dot be>
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of the last outgoing timestamp and of the last sender-side
time. Timestamps can only go forward if they do at the sender
side, can only go back if they do at the sender side, and remain the
same if they remain the same at the sender side. Fixes#565319.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (obtain_source),
(rtp_session_create_source), (rtp_session_process_rtp),
(rtp_session_process_sr), (rtp_session_process_rr),
(rtp_session_process_sdes), (rtp_session_process_bye):
Make obtain_source return an aditional ref so that we don't lose our ref
to it when a session cleanup occurs when we are emiting a signal.
Emit the on_new_ssrc signal for the CSRC, not the SSRC.
Fixes#562319.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_reset_sync),
(gst_rtp_bin_clear_pt_map):
Reset the sync parameters when clearing the payload type map too.
Fixes#562312.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (get_client),
(gst_rtp_bin_reset_sync), (gst_rtp_bin_associate),
(gst_rtp_bin_handle_sync), (create_stream),
(gst_rtp_bin_class_init), (new_ssrc_pad_found):
* gst/rtpmanager/gstrtpbin.h:
Remove a lot of per stream state that is not needed and pass new info in
the method call.
Add signal to reset sync parameters.
Avoid parsing the caps to get a clock_base, we get this from the sync
signal now.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_set_property),
(rtp_session_get_property):
Add property to configure the RTCP MTU.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(copy_source), (rtp_session_create_sources),
(rtp_session_get_property):
Add G_PARAM_STATIC_STRINGS.
Add property to return a GValueArray of all known RTPSources in the
session.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_create_sdes), (rtp_source_set_property),
(rtp_source_get_property):
Remove properties to set the various SDES items, an application is never
supposed to change the RTPSource data.
Change the SDES getter properties to one SDES property that returns all
SDES items in a GstStructure.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_release_pad):
Release the right pads on rtpbin. Fixes#561752.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (get_current_times),
(rtcp_thread), (gst_rtp_session_chain_recv_rtp):
Pass the running time to the session when processing RTP packets.
Improve the time function to provide more info.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (update_arrival_stats),
(rtp_session_process_rtp), (rtp_session_process_sdes),
(rtp_session_process_rtcp), (session_start_rtcp),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Mark the internal source with a flag.
Use running_time instead of the more useless timestamp.
Validate a source when a valid SDES has been received.
Pass the current system time when processing SR packets.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_init), (rtp_source_create_stats),
(rtp_source_get_property), (rtp_source_send_rtp),
(rtp_source_process_rb), (rtp_source_get_new_rb),
(rtp_source_get_last_rb):
* gst/rtpmanager/rtpsource.h:
Add property to get source stats.
Mark params as STATIC_STRINGS.
Calculate the bitrate at the sender SSRC.
Avoid negative values in the round trip time calculations.
* gst/rtpmanager/rtpstats.h:
Update some docs and change some variable name to more closely reflect
what it contains.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain_rtcp):
Initialize return value to fix compiler warning about uninitialized
variable.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_handle_sync), (create_stream), (free_stream),
(new_ssrc_pad_found):
Remove internal sync pad, use signals instead to get lip-sync
notifications.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_base_init),
(gst_rtp_jitter_buffer_class_init),
(gst_rtp_jitter_buffer_internal_links), (create_rtcp_sink),
(remove_rtcp_sink), (gst_rtp_jitter_buffer_request_new_pad),
(gst_rtp_jitter_buffer_release_pad),
(gst_rtp_jitter_buffer_sink_rtcp_event),
(gst_rtp_jitter_buffer_chain_rtcp),
(gst_rtp_jitter_buffer_get_property):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Make it possible to send SR packets to the jitterbuffer.
Check if the SR timestamps are valid by comparing them to the RTP
timestamps.
Signal the SR packet and the timing information to listeners.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_rtcp_chain), (gst_rtp_ssrc_demux_src_query):
Remove some unused code.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of the last seen RTP timestamp so that we can filter out
invalid SR packets.
Original commit message from CVS:
* gst/rtpmanager/rtpsource.c: (get_clock_rate):
Fix GST_DEBUG call to only have as many arguments as required
by the format string. Fixes a compiler warning.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (create_stream), (new_ssrc_pad_found):
Do not try to keep track of the clock-rate ourselves but simply get the
value from the jitterbuffer.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_get_sync):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add some debug info.
Pass the clock-rate to the jitterbuffer.
Also pass the clock-rate along with the rtp timestamp when getting the
sync parameters.
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_chain):
Fix some debug.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Keep track of clock-rate changes and return the clock-rate together with
the rtp timestamps used for sync.
Don't try to construct timestamps when we have no base_time.
* gst/rtpmanager/rtpsource.c: (get_clock_rate):
Request a new clock-rate when the payload type changes.
Reset the jitter calculation when the clock-rate changes.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps),
(gst_rtp_jitter_buffer_flush_stop), (gst_rtp_jitter_buffer_chain):
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew):
Small cleanups and some more debug info.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain):
Also configure the next expected output seqnum when we get a seqnum-base
on the caps.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps),
(gst_rtp_jitter_buffer_flush_start),
(gst_rtp_jitter_buffer_flush_stop), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Fix problem with using the output seqnum counter to check for input
seqnum discontinuities.
Improve gap detection and recovery, reset and flush the jitterbuffer on
seqnum restart. Fixes#556520.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_insert):
Fix wrong G_LIKELY.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_event_send_rtcp_src), (create_send_rtcp_src):
Install event handler on the rtcp_src pad, make LATENCY event return
TRUE.
Original commit message from CVS:
Patch by: Håvard Graff <havard dot graff at tandberg dot com>
* gst/rtpmanager/gstrtpbin-marshal.list:
Add marshaller for new action signal.
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_get_internal_session),
(gst_rtp_bin_class_init):
* gst/rtpmanager/gstrtpbin.h:
Add action signal to retrieve the internal RTPSession object.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_get_property), (gst_rtp_session_release_pad):
Add property to access the internal RTPSession object.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(check_collision):
* gst/rtpmanager/rtpsession.h:
Add action signal to retrieve an RTPSource object by SSRC.
See #555396.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps):
Only update the seqnum-base when it was not already configured for the
streams.
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (on_new_ssrc), (on_ssrc_collision),
(on_ssrc_validated), (on_ssrc_active), (on_ssrc_sdes),
(on_bye_ssrc), (on_bye_timeout), (on_timeout), (on_sender_timeout):
Ref the rtpsource object before we release the session lock when we emit
the signals.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session),
(gst_rtp_bin_associate), (gst_rtp_bin_sync_chain):
Do not try to adjust the offset of streams for which we have not yet
seen an SR packet. Avoids large ts-offsets in some cases.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (on_sender_timeout),
(create_session), (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (gst_rtp_bin_class_init),
(gst_rtp_bin_request_new_pad):
* gst/rtpmanager/gstrtpbin.h:
Add signal to notify listeners when a sender becomes a receiver.
Tweak lip-sync code, don't store our own copy of the ts-offset of the
jitterbuffer, don't adjust sync if the change is less than 4msec.
Get the RTP timestamp <-> GStreamer timestamp relation directly from
the jitterbuffer instead of our inaccurate version from the source.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_get_sync):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add G_LIKELY macros, use global defines for max packet reorder and
dropouts.
Reset the jitterbuffer clock skew detection when packets seqnums are
changed unexpectedly.
* gst/rtpmanager/gstrtpsession.c: (on_sender_timeout),
(gst_rtp_session_class_init), (gst_rtp_session_init):
* gst/rtpmanager/gstrtpsession.h:
Add sender timeout signal.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_insert),
(rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Add some G_LIKELY macros.
Keep track of the extended RTP timestamp so that we can report the RTP
timestamp <-> GStreamer timestamp relation for lip-sync.
Remove server timestamp gap detection code, the server can sometimes
make a huge gap in timestamps (talk spurts,...) see #549774.
Detect timetamp weirdness instead by observing the sender/receiver
timestamp relation and resync if it changes more than 1 second.
Add method to report about the current rtp <-> gst timestamp relation
which is needed for lip-sync.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(on_sender_timeout), (check_collision), (rtp_session_process_sr),
(session_cleanup):
* gst/rtpmanager/rtpsession.h:
Add sender timeout signal.
Remove inaccurate rtp <-> gst timestamp relation code, the
jitterbuffer can now do an accurate reporting about this.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (calculate_jitter),
(rtp_source_process_rtp):
* gst/rtpmanager/rtpsource.h:
Remove inaccurate rtp <-> gst timestamp relation code.
* gst/rtpmanager/rtpstats.h:
Define global max-reorder and max-dropout constants for use in various
subsystems.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_send_rtcp),
(gst_rtp_session_event_send_rtp_sink):
Send EOS when the session object instructs us to.
* gst/rtpmanager/rtpsession.c: (rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Make it possible for the session manager to instruct us to send EOS. We
currently will EOS when the session is a sender and when the sender part
goes EOS. This is not entirely correct behaviour because the session
could still participate as a receiver.
Fixes#549409.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (new_ssrc_pad_found):
Reset rtp timestamp interpollation when we detect a gap when the
clock_base changed.
Don't try to adjust the ts-offset when it's too big (> 3seconds)
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_set_ssrc):
* gst/rtpmanager/gstrtpsession.h:
Add method to set session SSRC.
* gst/rtpmanager/rtpsession.c: (check_collision),
(rtp_session_set_internal_ssrc), (rtp_session_get_internal_ssrc),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Added debugging for the collision checks.
Add method to change the internal SSRC of the session.
* gst/rtpmanager/rtpsource.c: (rtp_source_process_rtp):
Reset the clock base when we detect large jumps in the seqnums.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c:
Print the pad-name in debug log.
* sys/dshowsrcwrapper/gstdshowaudiosrc.c:
* sys/dshowsrcwrapper/gstdshowvideosrc.c:
Use "-" instead of "_" in property names. Can we call them just
"device" like everywhere else?
Original commit message from CVS:
Based on patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Make the buffer metadata writable before inserting it in the
jitterbuffer because the jitterbuffer will modify the timestamps.
* gst/rtpmanager/rtpjitterbuffer.c:
Update method comment about requiring writable metadata on buffers.
* gst/rtpmanager/rtpsession.c: (rtp_session_process_sr),
(rtp_session_process_rtcp):
Make the RTCP buffer metadata writable because we want to modify the
metadata.
Fixes#546312.
Original commit message from CVS:
Patch by: Håvard Graff <havard dot graff at tandberg dot com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Fix debug by logging the right seqnum.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/gstrtpbin.c: (get_pt_map):
Release lock before emitting the request-pt-map signal.
Fixes#543480.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_send_rtp), (gst_rtp_session_send_rtcp),
(gst_rtp_session_sync_rtcp), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_chain_recv_rtcp), (gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsession.c: (source_push_rtp),
(rtp_session_send_rtp):
* gst/rtpmanager/rtpsource.c: (push_packet), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_send_rtp):
Changed some GST_DEBUG() to GST_LOG() to reduce the spam when a
pipeline is running normally.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_init),
(gst_rtp_session_finalize), (rtcp_thread),
(gst_rtp_session_chain_recv_rtp), (gst_rtp_session_chain_recv_rtcp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsession.c: (check_collision),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_rtcp), (rtp_session_send_rtp),
(rtp_session_send_bye_locked), (rtp_session_send_bye),
(rtp_session_next_timeout), (session_report_blocks), (session_cleanup),
(is_rtcp_time), (rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Do not mix the use of g_get_current_time() with gst_clock_get_time().
Original commit message from CVS:
* ext/dc1394/gstdc1394.c:
* ext/ivorbis/vorbisdec.c:
* ext/jack/gstjackaudiosink.c:
* ext/metadata/gstmetadatademux.c:
* ext/mythtv/gstmythtvsrc.c:
* ext/theora/theoradec.c:
* gst-libs/gst/app/gstappsink.c:
* gst/bayer/gstbayer2rgb.c:
* gst/deinterlace/gstdeinterlace.c:
* gst/rawparse/gstaudioparse.c:
* gst/rawparse/gstvideoparse.c:
* gst/rtpmanager/gstrtpbin.c:
* gst/rtpmanager/gstrtpclient.c:
* gst/rtpmanager/gstrtpjitterbuffer.c:
* gst/rtpmanager/gstrtpptdemux.c:
* gst/rtpmanager/gstrtpsession.c:
* gst/rtpmanager/gstrtpssrcdemux.c:
* gst/selector/gstinputselector.c:
* gst/selector/gstoutputselector.c:
* gst/videosignal/gstvideoanalyse.c:
* gst/videosignal/gstvideodetect.c:
* gst/videosignal/gstvideomark.c:
* sys/oss4/oss4-mixer.c:
* sys/oss4/oss4-sink.c:
* sys/oss4/oss4-source.c:
Do not use short_description in section docs for elements. We extract
them from element details and there will be warnings if they differ.
Also fixing up the ChangeLog order.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_init),
(gst_rtp_bin_finalize), (gst_rtp_bin_change_state):
Fix deadlock when shutting down, use a new lock instead to properly
shutdown.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c:
(gst_rtp_bin_propagate_property_to_jitterbuffer),
(gst_rtp_bin_change_state), (new_payload_found),
(new_ssrc_pad_found):
Break out of callbacks when we are shutting down.
Make sure no state changes can happen when we reconfigure.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
When checking the seqnum, reset the jitterbuffer if the gap is too big,
we need to do this so that we can better handle a restarted source.
Fix some comments.
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew),
(rtp_jitter_buffer_insert):
Tweak the skew resync diff.
Use our working seqnum compare function in -base.
Rework the jitterbuffer insert code to make it clearer and more
performant by only retrieving the seqnum of the input buffer once and by
adding some G_LIKELY compiler hints.
Improve debugging for duplicate packets.
* gst/rtpmanager/rtpsource.c: (rtp_source_process_rtp):
Fix a comment, we don't do skew correction here..
Original commit message from CVS:
Patch by: Håvard Graff <havard dot graff at tandberg dot com>
* gst/rtpmanager/gstrtpbin.c:
(gst_rtp_bin_propagate_property_to_jitterbuffer),
(gst_rtp_bin_set_property):
Propagate the do-lost and latency properties to the jitterbuffers when
they are changed on rtpbin.
Original commit message from CVS:
* docs/Makefile.am:
Don't attempt to build plugin docs when they're disabled.
* gst/bayer/Makefile.am:
Add libgstvideo to the link.
* gst/rtpmanager/Makefile.am:
Fix link order, and move LIBS things to _LIBS
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Simply drop bad RTP packets with a warning instead of just posting an
error and stopping. This is a perfectly recoverable event and we don't
force people to use an rtpbin to filter out bad packets first.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Avoid waiting for a negative (huge) duration when the last packet has a
lower timestamp than the current packet.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_query_send_rtcp_src):
Make sure to unref the rtpsession returned by gst_pad_get_parent() to
prevent a memory leak.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Initialise with GST_CLOCK_TIME_NONE to avoid compiler warning.
Original commit message from CVS:
* gst/rtpmanager/rtpsource.c: (rtp_source_finalize):
Make sure to unref the caps used by RTPSource to prevent a memory leak.
Original commit message from CVS:
Patch by: Olivier Crete <tester at tester dot ca>
* gst/rtpmanager/rtpsession.c: (source_clock_rate),
(rtp_session_process_bye), (rtp_session_send_bye_locked):
Unlock the session lock when calling one of our callbacks.
Fixes#532011.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_stream), (gst_rtp_bin_init),
(gst_rtp_bin_set_property), (gst_rtp_bin_get_property):
* gst/rtpmanager/gstrtpbin.h:
Expose new jitterbuffer property in rtpbin too.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init), (gst_rtp_jitter_buffer_init),
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Disable sending out rtp packet lost events by default and make a
property to enabe it. We will likely enable it by default when the base
depayloaders have a default handler for them so that we don't send these
events all through the pipeline for now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_init), (gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_src_event), (gst_rtp_jitter_buffer_chain),
(gst_rtp_jitter_buffer_loop):
Remove private version of a function that is in -base now.
Add src event handler.
Rework the jitterbuffer pushing loop so that it can quickly react to
lost packets and instruct the depayloader of them. This can then be used
to implement error concealment data.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_query_send_rtcp_src), (create_recv_rtcp_sink),
(create_send_rtcp_src):
Set up some internal links functions for the RTCP and sync pads because
the defaults are really not correct.
Implement a query handler for the RTCP src pad, mostly to correctly
report about the latency.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain):
* gst/rtpmanager/rtpsession.c: (update_arrival_stats),
(rtp_session_process_sr), (rtp_session_on_timeout):
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter):
* gst/rtpmanager/rtpsource.h:
* gst/rtpmanager/rtpstats.h:
Also keep track of the first buffer timestamp together with the first
RTP timestamp as they both are needed to construct the timing of
outgoing packets in the jitterbuffer and are therefore also needed to
manage lip-sync. This fixes lip-sync if the first RTP packets arrive
with a wildly different gap.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (free_session):
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_finalize):
Avoid leaking pads in the RTP manager.
Original commit message from CVS:
Based on patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_init),
(rtcp_thread), (start_rtcp_thread), (stop_rtcp_thread),
(join_rtcp_thread), (gst_rtp_session_change_state):
Avoid a deadlock when joining the RTCP thread in PAUSED because it might
be blocked downstream. Also avoid spawning multiple rtcp threads.
Fixes#520894.
Original commit message from CVS:
Patch by: Stefan Kost <ensonic@users.sf.net>
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew):
Don't try to reset the clock skew when we have no timestamps.
Fixes#519005.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate):
Ignore streams that did not receive an SR packet when doing
synchronisation. Fixes#516160.
Original commit message from CVS:
Patch by: Thijs Vermeir <thijsvermeir at gmail dot com>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain):
Try to get the new clock-rate from the buffer caps when we receive a new
payload type instead of always firing the signal. Fixes#512774.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_associate),
(create_stream), (payload_type_change), (new_ssrc_pad_found):
Also handle lip-sync when the clock-rate is not provided with caps but
with a signal.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain):
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew),
(rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Remove the fixed clock-rate from the jitterbuffer and extend it so that
a clock-rate can be provided with each buffer instead. Fixes#511686.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_init), (gst_rtp_jitter_buffer_change_state),
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Remove old unused variable.
Track pt on input buffers and get the clock-rate when it changes.
Ignore packets with unknown clock-rate. See #511686.
Original commit message from CVS:
Patch by: Olivier Crete <tester@tester.ca>
* gst/rtpmanager/rtpsource.c: Fix unref of buffer using the
wrong function. Fixes#511920
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
If we find the caps in the cache, use it to parse the clock-rate instead
of returning an error. Fixes a TODO as found by Youness Alaoui.
Original commit message from CVS:
Patch by: Youness Alaoui <youness dot alaoui at collabora dot co dot uk>
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_clock_rate):
* gst/rtpmanager/rtpsession.c: (rtp_session_set_callbacks),
(rtp_session_set_process_rtp_callback),
(rtp_session_set_send_rtp_callback),
(rtp_session_set_send_rtcp_callback),
(rtp_session_set_sync_rtcp_callback),
(rtp_session_set_clock_rate_callback),
(rtp_session_set_reconsider_callback), (source_push_rtp),
(source_clock_rate), (rtp_session_process_bye),
(rtp_session_process_rtcp), (rtp_session_send_bye),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Make it possible to use different user_data for each of the callbacks.
Fixes#508587.
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (create_send_rtp_sink):
Don't set fixed caps, we can basically do everything the upsteam peer
pad can renegotiate to. Fixes#507940.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Don't unref the popped buffer when we don't have ownership.
Fixes#507020.
Original commit message from CVS:
* gst/rtpmanager/gstrtpptdemux.c: (gst_rtp_pt_demux_finalize),
(gst_rtp_pt_demux_setup), (gst_rtp_pt_demux_release),
(gst_rtp_pt_demux_change_state):
* gst/rtpmanager/gstrtpssrcdemux.c: (gst_rtp_ssrc_demux_reset),
(gst_rtp_ssrc_demux_dispose), (gst_rtp_ssrc_demux_src_query),
(gst_rtp_ssrc_demux_change_state):
Clean up the dynamic pads when going to READY.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_class_init),
(gst_rtp_bin_handle_message):
* gst/rtpmanager/gstrtpsession.c: (source_get_sdes_structure),
(on_ssrc_sdes):
Post a message when the SDES infor changes for a source.
* gst/rtpmanager/rtpsession.c:
* gst/rtpmanager/rtpsource.c:
Update some comments.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session):
* gst/rtpmanager/rtpjitterbuffer.c:
Update comment.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_set_property), (gst_rtp_session_get_property):
Define some GObject properties to set SDES and other configuration.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(rtp_session_init), (rtp_session_finalize),
(rtp_session_set_property), (rtp_session_get_property),
(on_ssrc_sdes), (rtp_session_set_bandwidth),
(rtp_session_get_bandwidth), (rtp_session_set_rtcp_fraction),
(rtp_session_get_rtcp_fraction), (rtp_session_set_sdes_string),
(rtp_session_get_sdes_string), (obtain_source),
(rtp_session_get_internal_source), (rtp_session_process_sdes),
(rtp_session_send_rtp), (rtp_session_next_timeout), (session_sdes),
(is_rtcp_time):
* gst/rtpmanager/rtpsession.h:
Add signal when new SDES infor has been found for a source.
Create properties for SDES and other info.
Simplify the SDES API.
Add method for getting the internal source object of the session.
* gst/rtpmanager/rtpsource.c: (rtp_source_class_init),
(rtp_source_finalize), (rtp_source_set_property),
(rtp_source_get_property), (rtp_source_set_callbacks),
(rtp_source_get_ssrc), (rtp_source_set_as_csrc),
(rtp_source_is_as_csrc), (rtp_source_is_active),
(rtp_source_is_validated), (rtp_source_is_sender),
(rtp_source_received_bye), (rtp_source_get_bye_reason),
(rtp_source_set_sdes), (rtp_source_set_sdes_string),
(rtp_source_get_sdes), (rtp_source_get_sdes_string),
(rtp_source_get_new_sr), (rtp_source_get_new_rb):
* gst/rtpmanager/rtpsource.h:
Add GObject properties for various things.
Don't leak the bye reason.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_query):
jitterbuffer can buffer an unlimited amount of time and thus has no
max_latency requirements.
Original commit message from CVS:
Patch by: Ole André Vadla Ravnås <ole.andre.ravnas@tandberg.com>
* gst/rtpmanager/gstrtpsession.c:
Fix bad function signatures (#492798).
Original commit message from CVS:
* gst/rtpmanager/rtpsession.c: (rtp_session_next_timeout),
When reconsidering RTCP timeouts, set the next timeout against the last
report time instead of the current clock time so that we don't end up
reconsidering forever.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
Only peek at the tail element instead of popping it off, which allows
us to greatly simplify things when the tail element changes.
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_event_recv_rtp_sink):
* gst/rtpmanager/gstrtpssrcdemux.c:
(gst_rtp_ssrc_demux_sink_event):
Forward FLUSH events instead of leaking them.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Remove the tail-changed callback in favour of a simple boolean when we
insert a buffer in the queue.
Add method to peek the tail of the buffer.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_flush_start),
(gst_rtp_jitter_buffer_flush_stop),
(gst_rtp_jitter_buffer_change_state), (apply_offset),
(gst_rtp_jitter_buffer_loop):
Remove some old unused variables.
Don't add the latency to the skew corrected timestamp, latency is only
used to sync against the clock.
Improve debugging.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(rtp_jitter_buffer_reset_skew), (calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Handle case where server timestamp goes backwards or wildly jumps by
temporarily pausing the skew correction.
Improve debugging.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (free_client):
Fix crasher in dispose.
* gst/rtpmanager/rtpjitterbuffer.c: (calculate_skew):
Handle cases where input buffers have no timestamps so that no clock
skew can be calculated, in this case interpollate timestamps based on
rtp timestamp and assume a 0 clock skew.
Original commit message from CVS:
* gst/rtpmanager/gstrtpjitterbuffer.c: (apply_latency),
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_query):
Remove jitter correction code, it's now in the lower level object.
Use new -core method for doing a peer query.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(calculate_skew), (rtp_jitter_buffer_insert):
* gst/rtpmanager/rtpjitterbuffer.h:
Move jitter correction to the lowlevel jitterbuffer.
Increase the max window size.
When filling the window, already start estimating the skew using a
parabolic weighting factor so that we have a much better startup
behaviour that gets more accurate with the more samples we have.
Increase the default weighting factor for the steady state to get
smoother timestamps.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_dispose),
(gst_rtp_bin_finalize):
Fix cleanup crasher.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(calculate_skew):
* gst/rtpmanager/rtpjitterbuffer.h:
Dynamically adjust the skew calculation window so that we calculate it
over a period of around 2 seconds.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (new_ssrc_pad_found):
Link to the right pads regardless of which one was created first in the
ssrc demuxer.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop):
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_process_rtp),
(gst_rtp_session_chain_recv_rtp), (gst_rtp_session_chain_send_rtp):
* gst/rtpmanager/rtpsource.c: (calculate_jitter):
Improve debugging.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_finalize),
(gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_rtcp_sink_event), (gst_rtp_ssrc_demux_chain),
(gst_rtp_ssrc_demux_rtcp_chain),
(gst_rtp_ssrc_demux_internal_links):
* gst/rtpmanager/gstrtpssrcdemux.h:
Fix race in creating the RTP and RTCP pads when a new SSRC is detected.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_set_property),
(gst_rtp_bin_get_property):
Use lock to protect variable.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_chain),
(convert_rtptime_to_gsttime), (gst_rtp_jitter_buffer_loop):
Reconstruct GST timestamp from RTP timestamps based on measured clock
skew and sync offset.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_init),
(rtp_jitter_buffer_set_tail_changed),
(rtp_jitter_buffer_set_clock_rate),
(rtp_jitter_buffer_get_clock_rate), (calculate_skew),
(rtp_jitter_buffer_insert), (rtp_jitter_buffer_peek):
* gst/rtpmanager/rtpjitterbuffer.h:
Measure clock skew.
Add callback to be notfied when a new packet was inserted at the tail.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter), (rtp_source_send_rtp):
* gst/rtpmanager/rtpsource.h:
Remove clock skew detection, it's move to the jitterbuffer now.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (create_session):
Also set NTP base time on new sessions.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop), (gst_rtp_jitter_buffer_query),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Use the right lock to protect our variables.
Fix some comment.
* gst/rtpmanager/gstrtpsession.c:
(gst_rtp_session_getcaps_send_rtp),
(gst_rtp_session_chain_send_rtp), (create_send_rtp_sink):
Implement getcaps on the sender sinkpad so that payloaders can negotiate
the right SSRC.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (calc_ntp_ns_base),
(gst_rtp_bin_change_state), (new_payload_found), (create_send_rtp):
Calculate and configure the NTP base time so that we can generate better
NTP times in SR packets.
Set caps on new ghostpad.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_loop):
Clean debug statement.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_init), (gst_rtp_session_set_property),
(gst_rtp_session_get_property), (get_current_ntp_ns_time),
(rtcp_thread), (gst_rtp_session_event_recv_rtp_sink),
(gst_rtp_session_internal_links), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_recv_rtp_sink),
(create_send_rtp_sink):
* gst/rtpmanager/gstrtpsession.h:
Add ntp-ns-base property to convert running_time to NTP time.
Handle NEWSEGMENT events on send and recv RTP pads so that we can
calculate the running time and thus NTP time of the packets.
Simplify getting the current NTP time using the pipeline clock.
Implement internal links functions.
Use the buffer timestamp to calculate the NTP time instead of the clock.
* gst/rtpmanager/gstrtpssrcdemux.c: (create_demux_pad_for_ssrc),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_chain), (gst_rtp_ssrc_demux_rtcp_chain),
(gst_rtp_ssrc_demux_internal_links),
(gst_rtp_ssrc_demux_src_query):
* gst/rtpmanager/gstrtpssrcdemux.h:
Implement internal links function.
Calculate the diff between different streams, this might be used later
to get the inter stream latency.
* gst/rtpmanager/rtpsession.c: (rtp_session_send_rtp):
Simple cleanup.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(calculate_jitter), (rtp_source_send_rtp), (rtp_source_get_new_sr):
Make the clock skew window a little bigger.
Apply the clock skew to all buffers, not just one with a new timestamp.
Calculate and debug sender clock drift.
Use extended last timestamp to interpollate for SR reports.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin-marshal.list:
* gst/rtpmanager/gstrtpbin.c: (gst_rtp_bin_get_client),
(gst_rtp_bin_associate), (gst_rtp_bin_sync_chain), (create_stream),
(gst_rtp_bin_init), (caps_changed), (new_ssrc_pad_found),
(create_recv_rtp), (create_recv_rtcp), (create_send_rtp):
* gst/rtpmanager/gstrtpbin.h:
Updated example pipelines in docs.
Handle sync_rtcp buffers from the SSRC demuxer to perform lip-sync.
Set the default latency correctly.
Add some more points where we can get caps.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_class_init),
(gst_jitter_buffer_sink_parse_caps), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_query),
(gst_rtp_jitter_buffer_set_property),
(gst_rtp_jitter_buffer_get_property):
Add ts-offset property to control timestamping.
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_class_init),
(gst_rtp_session_init), (gst_rtp_session_set_property),
(gst_rtp_session_get_property), (get_current_ntp_ns_time),
(rtcp_thread), (stop_rtcp_thread), (gst_rtp_session_change_state),
(gst_rtp_session_send_rtcp), (gst_rtp_session_sync_rtcp),
(gst_rtp_session_cache_caps), (gst_rtp_session_clock_rate),
(gst_rtp_session_sink_setcaps), (gst_rtp_session_chain_recv_rtp),
(gst_rtp_session_event_send_rtp_sink),
(gst_rtp_session_chain_send_rtp), (create_recv_rtp_sink),
(create_recv_rtcp_sink), (create_send_rtp_sink),
(create_send_rtcp_src):
Various cleanups.
Feed rtpsession manager with NTP time based on pipeline clock when
handling RTP packets and RTCP timeouts.
Perform all RTCP with the system clock.
Set caps on RTCP outgoing buffers.
* gst/rtpmanager/gstrtpssrcdemux.c: (find_demux_pad_for_ssrc),
(create_demux_pad_for_ssrc), (gst_rtp_ssrc_demux_base_init),
(gst_rtp_ssrc_demux_init), (gst_rtp_ssrc_demux_sink_event),
(gst_rtp_ssrc_demux_rtcp_sink_event), (gst_rtp_ssrc_demux_chain),
(gst_rtp_ssrc_demux_rtcp_chain):
* gst/rtpmanager/gstrtpssrcdemux.h:
Also demux RTCP messages.
* gst/rtpmanager/rtpsession.c: (rtp_session_set_callbacks),
(update_arrival_stats), (rtp_session_process_rtp),
(rtp_session_process_rb), (rtp_session_process_sr),
(rtp_session_process_rr), (rtp_session_process_rtcp),
(rtp_session_send_rtp), (rtp_session_send_bye),
(session_start_rtcp), (session_report_blocks), (session_cleanup),
(rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Remove the get_time callback, the GStreamer part will feed us with
enough timing information.
Split sync timing and RTCP timing information.
Factor out common RB handling for SR and RR.
Send out SR RTCP packets for lip-sync.
Move SR and RR packet info generation to the source.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (get_clock_rate), (calculate_jitter),
(rtp_source_process_rtp), (rtp_source_send_rtp),
(rtp_source_process_sr), (rtp_source_process_rb),
(rtp_source_get_new_sr), (rtp_source_get_new_rb),
(rtp_source_get_last_sr):
* gst/rtpmanager/rtpsource.h:
* gst/rtpmanager/rtpstats.h:
Use caps on incomming buffers to get timing information when they are
there.
Calculate clock scew of the receiver compared to the sender and adjust
the rtp timestamps.
Calculate the round trip in sources.
Do SR and RR calculations in the source.
