Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstelement.h:
Fix up documentation to link to the correct GstGError section.
Add GST_ELEMENT_INFO macro since someone else added a Info message.
Original commit message from CVS:
* gst/gstelement.h:
Clarify _NO_PREROLL a bit more.
* gst/gstevent.c:
Fix docs.
* gst/gstpad.c: (gst_pad_link_check_hierarchy),
(gst_pad_get_caps_unlocked), (gst_pad_save_thyself),
(handle_pad_block), (gst_pad_push_event), (gst_pad_send_event):
Patch by: Yves Lefebvre <ivanohe at abacom dot com> Fix possible deadlock
due to wrong locking order. Fixes#361769.
Remove some redundant/misplaced checks in pad_block.
* libs/gst/base/gstbasesink.c: (gst_base_sink_get_position):
For negative rates, count backwards from the duration.
Original commit message from CVS:
* gst/gstelement.h:
gcc versions prior to gcc 3.3 apparently complain about a NULL printf
format string, so don't use G_GNUC_PRINTF for those versions.
Original commit message from CVS:
* configure.ac:
* docs/gst/gstreamer-sections.txt:
* gst/gstconfig.h.in:
* gst/gstelement.h:
* gst/gstinfo.h:
Add GST_USING_PRINTF_EXTENSION to gstconfig.h so that we know
whether we can use G_GNUC_PRINTF in other header files and at
least check the printf format/arguments of debug messages and
GST_ELEMENT_ERROR messages when the printf extension is not
being used.
Replace more tabs with spaces in gstinfo.h and remove two spurious
function declarations in GST_DISABLE_DEBUG part with macros.
Original commit message from CVS:
2005-11-29 Andy Wingo <wingo@pobox.com>
* gst/gstevent.h (struct _GstEvent): Only one pointer of padding.
* gst/gststructure.h (struct _GstStructure): Only one pointer of
padding.
* gst/gstquery.h (struct _GstQuery): Only one pointer of padding.
* gst/gstpluginfeature.h: Remove a comment in PluginFeature.
* gst/gstplugin.h (struct _GstPluginClass): Add some padding.
* gst/gstobject.h: (struct _GstObject): Only one pointer of
padding; reduces object size by about 30%. We don't expect
anything else to go into gstobject.
* gst/gstminiobject.h (struct _GstMiniObject)
(struct _GstMiniObjectClass): Only one pointer of padding; the
payload is only a pointer and two ints anyway. For the class there
are only two methods as well.
* gst/gstelement.h (struct _GstElementClass): Removed
the state_changed signal callback, it is not used.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_wait), (gst_base_sink_do_sync),
(gst_base_sink_handle_event):
* gst/base/gstbasesink.h:
No need to store the clock, the parent element class already
has it.
* gst/gstbin.c: (gst_bin_set_clock_func), (gst_bin_add_func):
Updates for clock_set returning a gboolean
* gst/gstclock.c: (gst_clock_entry_new), (gst_clock_id_wait),
(gst_clock_id_wait_async), (gst_clock_class_init),
(gst_clock_init), (gst_clock_finalize),
(gst_clock_get_internal_time), (gst_clock_get_time),
(gst_clock_slave_callback), (gst_clock_set_master),
(gst_clock_get_master), (do_linear_regression),
(gst_clock_add_observation), (gst_clock_set_property),
(gst_clock_get_property):
* gst/gstclock.h:
Implement master/slave. When setting a clock as a slave, a
periodic timeout is scheduled to sample master and slave times.
Then the slave clock is recalibrated to match offset and rate
of the master clock.
Update logging a bit.
Add flag so that a clock can state that is cannot be slaved to
another clock.
* gst/gstelement.c: (gst_element_set_clock):
* gst/gstelement.h:
The set_clock returns a gboolean for when an element cannot
deal with the selected clock in the pipeline.
* gst/gstpipeline.c: (gst_pipeline_change_state),
(gst_pipeline_set_clock):
* gst/gstpipeline.h:
Handle the case where the selected clock cannot be set on
the pipeline.
* gst/net/gstnetclientclock.c: (gst_net_client_clock_class_init),
(gst_net_client_clock_init), (gst_net_client_clock_finalize),
(gst_net_client_clock_set_property),
(gst_net_client_clock_get_property),
(gst_net_client_clock_observe_times):
* gst/net/gstnetclientclock.h:
Use regression code in GstClock parent, remove duplicated
functionality.
Original commit message from CVS:
2005-11-21 Andy Wingo <wingo@pobox.com>
* *.h:
* *.c: Ran scripts/update-macros. Oh yes.
* gst/gstobject.h (GST_OBJECT_GET_LOCK, GST_OBJECT_LOCK)
(GST_OBJECT_TRYLOCK, GST_OBJECT_UNLOCK): Renamed from
GST_GET_LOCK, etc.
* scripts/update-macros: New script. Run it on your files to
change GST_LOCK to GST_OBJECT_LOCK, and the same for UNLOCK as
well.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/gstelement.c:
* gst/gstelement.h:
Fix docs, move some STATE macros to private.
Original commit message from CVS:
* check/Makefile.am:
* check/pipelines/stress.c: (GST_START_TEST),
(simple_launch_lines_suite), (main):
Small state change torture test.
* docs/design/part-states.txt:
* gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_handle_object), (gst_base_sink_event), (do_playing),
(gst_base_sink_change_state):
Never take state lock from streaming thread, clean up ugly
hacks. Unfortunatly core does not yet support nice ways to
async commit state.
* gst/gstbin.c: (gst_bin_remove_func), (gst_bin_recalc_state),
(bin_bus_handler):
Start state recalc if a STATE_DIRTY message is posted, but only
on the toplevel bin.
* gst/gstelement.c: (gst_element_sync_state_with_parent),
(gst_element_get_state_func), (gst_element_abort_state),
(gst_element_commit_state), (gst_element_lost_state),
(gst_element_set_state_func), (gst_element_change_state):
* gst/gstelement.h:
State variables are now protected with the LOCK, the state
lock is only used to serialize _set_state().
Original commit message from CVS:
* gst/gstbin.h:
* gst/gstelement.c: (gst_element_class_init),
(gst_element_set_state), (gst_element_set_state_func):
* gst/gstelement.h:
Pending ABI changes.
GThreadPool in GstBinClass to monitor async state changes.
state_cookie in GstElement to detect concurrent gst/set state.
set_state is now virtual too in case a very complicated element
has to be constructed.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* docs/libs/gstreamer-libs-sections.txt:
* gst/gstelement.h:
add new api entries
hide internal macro
Original commit message from CVS:
2005-10-10 Andy Wingo <wingo@pobox.com>
* gst/gstelement.c (gst_element_init, gst_element_finalize):
Allocate and free the mutex properly.
* gst/gstelement.h (GST_STATE_UNLOCK_FULL, GST_STATE_LOCK_FULL):
New macros.
(GstElement): The state_lock is now recursive. Rebuild your
plugins, suckers. Old macros adapted.
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
* gst/base/gstbasesrc.h:
* gst/gstelement.h:
* gst/gstevent.h:
* gst/gstobject.h:
* gst/gstpad.h:
* gst/gstpipeline.c:
* gst/gstpipeline.h:
* gst/gstutils.h:
* gst/gstxml.h:
added two new functions to the docs
documents all undocumented GstXXXFlags
completed some incomplete docs
Original commit message from CVS:
* docs/design/part-TODO.txt:
Update TODO.
* gst/gstbin.c: (add_to_queue), (clear_queue), (reset_outdegree),
(update_outdegree), (find_element), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free),
(gst_bin_iterate_sorted), (gst_bin_element_set_state),
(gst_bin_change_state):
* gst/gstelement.h:
Remove element variable, we keep element info in the iterator now.
Original commit message from CVS:
* check/gst/gstbin.c: (GST_START_TEST):
Enable check that works now.
* gst/gstbin.c: (add_to_queue), (clear_queue), (reset_outdegree),
(update_outdegree), (find_element), (gst_bin_sort_iterator_next),
(gst_bin_sort_iterator_resync), (gst_bin_sort_iterator_free),
(gst_bin_iterate_sorted), (gst_bin_element_set_state),
(gst_bin_change_state):
* gst/gstbin.h:
Redid the state change algorithm using a topological sort algo.
Handles all cases correctly.
Exposed iterator for state change order.
* gst/gstelement.h:
Temp storage for state changes. Need to get rid of this soon.
Original commit message from CVS:
* gst/gstbin.c: (gst_bin_add_func):
Some more debug info.
* gst/gstelement.c: (gst_element_send_event):
Simplify send_event
* gst/gstelement.h:
Don't know how flags got broken.
* gst/gstquery.h:
Added new query.
Original commit message from CVS:
2005-09-02 Andy Wingo <wingo@pobox.com>
* gst/gstelement.h: Add magical pixie dust to make glib-mkenums
consider this enum an enum and not a flags.
Original commit message from CVS:
2005-09-02 Andy Wingo <wingo@pobox.com>
* gst/gstelement.h (GstState): Renamed from GstElementState,
changed to be a normal enum instead of flags.
(GstStateChangeReturn): Renamed from GstElementStateReturn, names
munged to be GST_STATE_CHANGE_*.
(GST_STATE_CHANGE): Renamed from GST_STATE_TRANSITION, updated to
work with the new state representation.
(GstStateChange): New enumeration of possible state transitions.
Replaces GST_STATE_FOO_TO_BAR with GST_STATE_CHANGE_FOO_TO_BAR.
(GstElementClass::change_state): Pass the GstStateChange along as
an argument. Helps language bindings, so they don't have to use
tricky lock-needing macros like GST_STATE_CHANGE ().
* scripts/update-states (file): New script. Run it on a file to
update it for state naming and API changes. Updates files in
place.
* All files updated for the new API.
Original commit message from CVS:
* docs/pwg/advanced-types.xml:
Well done to Michael for catching my deliberate introduction
of this spelling mistake.
* gst/gstbin.c: (gst_bin_remove_func), (bin_bus_handler):
* gst/gstelement.h:
Add GST_ELEMENT_UNPARENTING to prevent races so that we can
unlink pads before removing the element from the bin.
Original commit message from CVS:
make GST_ELEMENT_ERROR not do GST_ERROR_OBJECT - these errors should
be handled by the application and not always printed as well
Original commit message from CVS:
Removed plugable schedulers.
Removed Scheduler/Manager from elements.
Removed gsttypes.h, rearranged includes.
Removed dependency pad<->element, element<>pipeline, and
various others, fix includes.
implement gst_pad_get_parent() with gst_object_get_parent()
Make GstTask sefcontained.
Fix _get_state() on GstBin, it did not return ASYNC with a 0
timeout.
Fix endless loop in iterator_fold_with_resync.
Original commit message from CVS:
* gst/base/gstbasesink.c: (gst_base_sink_handle_object),
(gst_base_sink_event), (gst_base_sink_get_times),
(gst_base_sink_do_sync), (gst_base_sink_change_state):
* gst/base/gstbasesink.h:
Store and use discont values when syncing buffers as described
in design docs.
* gst/base/gstbasesrc.c: (gst_base_src_send_discont),
(gst_base_src_do_seek), (gst_base_src_loop), (gst_base_src_start),
(gst_base_src_activate_push):
Push discont event when starting.
* gst/elements/gstidentity.c: (gst_identity_transform):
Small cleanups.
* gst/gstbin.c: (gst_bin_change_state):
Small cleanups in base_time distribution.
* gst/gstelement.c: (gst_element_set_base_time),
(gst_element_get_base_time), (gst_element_change_state):
* gst/gstelement.h:
Added methods for the base_time of the element.
Some MT fixes.
* gst/gstpipeline.c: (gst_pipeline_send_event),
(gst_pipeline_change_state), (gst_pipeline_set_new_stream_time),
(gst_pipeline_get_last_stream_time):
* gst/gstpipeline.h:
MT fixes.
Handle seeking as described in design doc, remove stream_time
hack.
Cleanups clock and stream_time selection code. Added accessors
for the stream_time.
Original commit message from CVS:
2005-06-27 Andy Wingo <wingo@pobox.com>
* gst/base/gsttypefindhelper.c (gst_type_find_helper): Unref any
remaining buffer.
* gst/gsttrace.c (gst_alloc_trace_list_sorted): New helper,
returns a sorted copy of the trace list.
(gst_alloc_trace_print_live): New API, only prints traces with
live objects. Sort the list.
(gst_alloc_trace_print_all): Sort the list.
(gst_alloc_trace_print): Align columns.
* gst/elements/gstttypefindelement.c:
* gst/elements/gsttee.c:
* gst/base/gstbasesrc.c:
* gst/base/gstbasesink.c:
* gst/base/gstbasetransform.c:
* gst/gstqueue.c: Adapt for pad activation changes.
* gst/gstpipeline.c (gst_pipeline_init): Unref after parenting
sched.
(gst_pipeline_dispose): Drop ref on sched.
* gst/gstpad.c (gst_pad_init): Set the default activate func.
(gst_pad_activate_default): Push mode by default.
(pre_activate_switch, post_activate_switch): New stubs, things to
do before and after switching activation modes on pads.
(gst_pad_set_active): Take a boolean and not a mode, dispatch to
the pad's activate function to choose which mode to activate.
Shortcut on deactivation and call the right function directly.
(gst_pad_activate_pull): New API, (de)activates a pad in pull
mode.
(gst_pad_activate_push): New API, same for push mode.
(gst_pad_set_activate_function)
(gst_pad_set_activatepull_function)
(gst_pad_set_activatepush_function): Setters for new API.
* gst/gstminiobject.c (gst_mini_object_new, gst_mini_object_free):
Trace all miniobjects.
(gst_mini_object_make_writable): Unref the arg if we copy, like
gst_caps_make_writable.
* gst/gstmessage.c (_gst_message_initialize): No trace init.
* gst/gstghostpad.c (gst_proxy_pad_do_activate)
(gst_proxy_pad_do_activatepull, gst_proxy_pad_do_activatepush):
Adapt for new pad API.
* gst/gstevent.c (_gst_event_initialize): Don't initialize trace.
* gst/gstelement.h:
* gst/gstelement.c (gst_element_iterate_src_pads)
(gst_element_iterate_sink_pads): New API functions.
* gst/gstelement.c (iterator_fold_with_resync): New utility,
should fold into gstiterator.c in some form.
(gst_element_pads_activate): Simplified via use of fold and
delegation of decisions to gstpad->activate.
* gst/gstbus.c (gst_bus_source_finalize): Set the bus to NULL,
help in debugging.
* gst/gstbuffer.c (_gst_buffer_initialize): Ref the buffer type
class once in init, like gstmessage. Didn't run into this issue
but it seems correct. Don't initialize a trace, gstminiobject does
that.
* check/pipelines/simple_launch_lines.c (test_stop_from_app): New
test, runs fakesrc ! fakesink, stopping on ::handoff via a message
to the bus.
(assert_live_count): New util function, uses alloc traces to check
cleanup.
* check/gst/gstghostpad.c (test_ghost_pads): More refcount checks.
To be modified when unlink drops the internal pad.
