Commit graph

9075 commits

Author SHA1 Message Date
Andre McCurdy
29433495d6 qtdemux: free seqh after calling qtdemux_parse_svq3_stsd_data()
The seqh buffer allocated in qtdemux_parse_svq3_stsd_data() needs to
be freed by the caller after use.

https://bugzilla.gnome.org/show_bug.cgi?id=777157

Signed-off-by: Andre McCurdy <armccurdy@gmail.com>
2017-01-12 11:10:50 +02:00
Edward Hervey
4a279f4499 isomp4: Don't spam debug log with knonw/padding atoms
Only output WARNING messages for atoms we don't know how to handle
instead of for padding/known atoms we don't need to do any processing
on

https://bugzilla.gnome.org/show_bug.cgi?id=777095
2017-01-10 16:03:00 +01:00
Tim-Philipp Müller
d7b2820b73 Fix indentation 2017-01-09 19:05:10 +00:00
Matthew Waters
bbe88b190b autodetect: bring the element state down after success
Otherwise some messages that are emitted by the element on NULL->READY
will not reach the application.

https://bugzilla.gnome.org/show_bug.cgi?id=764947
2017-01-10 01:20:18 +11:00
Jan Schmidt
12ad37fdb3 qtmux: Write tfdt atom into fragmented files.
The DASH spec requires that tfdt atoms be present, so
write one out. ISO/IEC 23009-1:2014 6.3.4.2

https://bugzilla.gnome.org/show_bug.cgi?id=708221
2017-01-08 01:23:52 +11:00
Jan Schmidt
1fc3d42f8a qtdemux: Don't reset output timestamps when no tfdt
If a fragmented stream doesn't have a tfdt, don't
reset the output timestamps at each fragment boundary
by erroneously using the default value of 0. Introduced
by commit 69fc48

https://bugzilla.gnome.org/show_bug.cgi?id=754230
2017-01-07 23:57:35 +11:00
Thibault Saunier
9d1942f286 meson: Install presets files 2017-01-05 09:49:21 -03:00
Garima Gaur
a2d02300f8 avidemux: fix some caps leaks
https://bugzilla.gnome.org//show_bug.cgi?id=776789
2017-01-03 11:32:20 +00:00
Vivia Nikolaidou
394be2c318 splitmuxsink: Return a bin with a "location" property as a sink
Splitmuxsink might be called with a custom bin as a sink. If it has a
"location" property, it can be used.
2017-01-03 01:34:02 +11:00
Jan Schmidt
335c9f28d6 splitmux: Rewrite buffer collection and scheduling
Majorly change the way that splitmuxsink collects
incoming data and sends it to the output, so that it
makes all decisions about when / where to split files
on the input side.

Use separate queues for each stream, so they can be
grown individually and kept as small as possible.

This removes raciness I observed where sometimes
some data would end up put in a different output file
over multiple runs with the same input.

Also fixes hangs with input queues getting full
and causing muxing to stall out.
2017-01-03 01:34:02 +11:00
Jan Schmidt
f7009eb5d7 splitmuxsink: Add format-location-full signal
Add a new signal for formatting the filename, which receives
a GstSample containing the first buffer from the reference
stream that will be muxed into that file.

Useful for creating filenames that are based on the
running time or other attributes of the buffer.

To make it work, opening of files and setting filenames is
now deferred until there is some data to write to it,
which also requires some changes to how async state changes
and gap events are handled.
2017-01-03 01:34:02 +11:00
Jan Schmidt
107902ec51 qtdemux: Always snap to the start of the keyframe
When performing a key-unit seek, always snap to the start ts
of the keyframe buffer we landed on so that the keyframe is
entirely within the resulting outgoing segment. That seems
the most sensible result, since the user requested snapping
to the keyframe position.
2017-01-03 01:34:02 +11:00
Jan Schmidt
f415730fdf qtdemux: Omit cslg_shift when snapping seeks
Segments times and seek requests are stored and handled
in raw 'PTS' time, without the cslg_shift - which only applies
to outgoing samples. Omit the cslg_shift portion when
extracting PTS to compare for internal seek snaps.

If the cslg_shift is included, then keyframe+snap-before seeks
generate a segment start/stop time that already includes the
cslg_shift, and it's then added a 2nd time, causing the
first buffer(s) to have timestamps that are out of segment.
2017-01-03 01:34:02 +11:00
Jan Schmidt
db0eddb10f qtmux: Remove bogus check in atom_stsc_add_new_entry()
Remove an old check from atom_stsc_add_new_entry() that
extends the last entry in the STSC if the samples per chunk
matches, as the new interleave merging logic requires that
the final entry by updateable. There's already code
below which simply merges the final entry into the previous
one when needed, so rely on that instead.

Fixes asserts like:

ERROR:atoms.c:2940:atom_stsc_update_entry: assertion failed:
(atom_array_index (&stsc->entries, len - 1).first_chunk == first_chunk)
2017-01-03 01:34:02 +11:00
Seungha Yang
65c5d6d080 qtdemux: Fix key_time in gst_qtdemux_adjust_seek()
time in segment should be PTS based (not DTS).

https://bugzilla.gnome.org/show_bug.cgi?id=765498
2017-01-03 01:34:02 +11:00
Jan Schmidt
389dd4e3d0 splitmuxsrc: Pass seek flags when activating.
Pass all seek flags when activating a part
based on a seek, so that SNAP flags are preserved.
2017-01-03 01:34:02 +11:00
Jan Schmidt
6a16f8ef2e splitmux: Fix a small race in the splitmuxsrc
Make sure the state of the parser is set to
collecting streams before chaining up to the
parent change_state() method, to close a
small window that can cause playback to
never commence.
2017-01-03 01:34:02 +11:00
Tim-Philipp Müller
eb5ee5b7a3 multifilesink: refactor max_files handling a bit
Use GQueue instead of a GSList so we don't have to traverse
the whole list to append something every time. And it also
keeps track of the number of items in it for us.

Add a function to add filenames to the list of old files and
use it in more places, so that memory doesn't build up in
other modes either if no max_files limit is specified.

https://bugzilla.gnome.org/show_bug.cgi?id=766991
2016-12-31 09:58:40 +00:00
Ursula Maplehurst
a10c1cc060 multifilesink: don't leak memory when no max-files limit is set
Technically we weren't leaking the memory, just storing it internally
and never using it until the element is freed. But we'd still use more
and more memory over time, so this is not good over longer periods
of time. Only keep track of files if there's actually a limit set,
so that we will prune the list from time to time.

https://bugzilla.gnome.org/show_bug.cgi?id=766991
2016-12-31 09:58:28 +00:00
Mark Nauwelaerts
e6a251e9c0 matroskademux: adjust segment stop for KEY_UNIT negative rate seeking 2016-12-29 12:48:56 +01:00
Mark Nauwelaerts
867ce71922 qtdemux: implement pull mode SNAP flag seeking 2016-12-29 12:48:56 +01:00
Mark Nauwelaerts
494f4beb40 avidemux: tweak KEY_UNIT SNAP seek handling
Previously, seeking to position y where y is (strictly) within a keyframe
would seek to that keyframe both with SNAP_BEFORE and SNAP_AFTER,
where the latter is now adjusted to really snap to the next keyframe.
2016-12-29 12:48:50 +01:00
Mark Nauwelaerts
3362dceb25 avidemux: correctly perform pull mode KEY_UNIT seeking
Rather amazingly (and equally unnoticed), keyunit seeking resulted in segments
where start != time (which is bogus for simple avi timeline).  So, properly
adjust the segment (start) rather than fiddling with segment time (only).
2016-12-28 13:59:30 +01:00
Mark Nauwelaerts
002cfd00b7 avidemux: restore considering of pull mode KEY_UNIT seeking
... by using the original seek event's flags rather than the corresponding
segment flags, which do not have such counterpart flags (and
do no longer have them covertly sneaking in nowadays).
2016-12-28 13:59:07 +01:00
Nicola Murino
c950672809 matroskamux: only drop actual streamheader buffers with xiph codecs
With Xiph codecs the stream header buffers are both in the caps and are
usually also at the beginning of each input stream, but it's perfectly
possible that the input stream does not have the stream header buffers
inline in the data. Matroskamux would drop the first N buffers assuming
they're stream headers, but this meant it would drop actual payload data
when the stream didn't contain the stream headers inline. Fix this by
only dropping leading buffers if they're flagged as stream headers. This
fixes issues with streams that are being tapped into after streaming
has started.

https://bugzilla.gnome.org/show_bug.cgi?id=749098
2016-12-21 17:02:57 +00:00
Nicola Murino
38265ee1a5 matroskamux: mark all packets of audio-only streams as keyframes
This helps with streaming audio-only streams via multifdsink,
tcpserversink and such.

https://bugzilla.gnome.org/show_bug.cgi?id=754696
2016-12-20 23:35:00 +00:00
Nicola Murino
92626d4085 matroskamux: add G722 audio support
https://bugzilla.gnome.org/show_bug.cgi?id=746574
2016-12-20 12:49:04 +02:00
Wonchul Lee
c7e23476c4 updsrc: Add to join multiple multicast interfaces
https://bugzilla.gnome.org/show_bug.cgi?id=776030
2016-12-19 10:50:14 +02:00
Tim-Philipp Müller
8ad0baccc2 rtpklvdepay: add the SPARSE flag to the outgoing stream-start event 2016-12-18 12:00:38 +00:00
Reynaldo H. Verdejo Pinochet
264be35e3c rtpmanager: place content before Since-version API marker
Avoids confusing the parser
2016-12-14 14:38:38 -08:00
Sebastian Dröge
76c007dd25 qtdemux: Check if we have enough data available when parsing edit lists
Also consume the data entry by entry to get complicated indexing out of
the code.

https://bugzilla.gnome.org/show_bug.cgi?id=776107
2016-12-14 21:48:24 +02:00
Sebastian Dröge
35748dc8f2 qtdemux: Check that the XiTh size is big enough
https://bugzilla.gnome.org/show_bug.cgi?id=775794
2016-12-14 10:17:41 +02:00
Heekyoung Seo
f7c033f4ec qtdemux: Check node length of video sample description
Add check for node length of video sample description and its fields and
for the XiTh atom.

Also unify the code a bit.

https://bugzilla.gnome.org/show_bug.cgi?id=775794
2016-12-14 10:17:41 +02:00
Heekyoung Seo
a5bfaf8a79 qtdemux: Enable xvid/mp2 codec support
Add support for xvid video and mp2 audio, add m2v1 fourcc.

https://bugzilla.gnome.org/show_bug.cgi?id=775794
2016-12-14 10:17:23 +02:00
Sebastian Dröge
63938ef730 gst: Don't declare variables inside the for loop header
This is a C99 feature.
2016-12-13 22:32:46 +02:00
Sebastian Dröge
fe2ae2c0f7 scaletempo: Ensure to reinit buffers whenever they were not allocated yet
That is, whenever we go through start/stop we have to ensure that on the
next opportunity the buffers are reallocated again. Otherwise the
buffers might be NULL because the element was reused with the same
configuration as before (i.e. set_caps() wouldn't have reinited the
buffers).

https://bugzilla.gnome.org/show_bug.cgi?id=775898
2016-12-11 13:27:27 +02:00
Sebastian Dröge
524e43e118 flxdec: Only send SEGMENT events after CAPS
I.e., don't just forward the event but delay it if we don't have caps on
the srcpad yet.
2016-12-09 17:55:39 +02:00
Sebastian Dröge
a08e72547d flxdec: Unref and unmap buffers in all code paths as needed
https://bugzilla.gnome.org/show_bug.cgi?id=775888
2016-12-09 17:49:40 +02:00
Garima Gaur
c3cdae4d6e monoscope: Unref allocation query after finished with it
https://bugzilla.gnome.org/show_bug.cgi?id=775752
2016-12-07 14:20:34 +02:00
Sebastian Dröge
96aaf889af flxdec: Allocate 0-initialized memory for the decoded frame
Otherwise we might leak arbitrary information from the uninitialized
memory if not every pixel is written.

https://scarybeastsecurity.blogspot.gr/2016/12/1days-0days-pocs-more-gstreamer-flic.html
2016-12-06 07:48:47 +02:00
Matt Staples
bc2adef550 rtspsrc: Fix session cleanup when handling redirect on PLAY
Redirect on PLAY wasn't doing the necessary session cleanup. Fixed by
removing code from gst_rtspsrc_send that changed the state varable upon
encountering a redirect. Better to let the redirect handlers in
gst_rtspsrc_retrieve_sdp and gst_rtspsrc_play do their own
state-dependent cleanup.

https://bugzilla.gnome.org/show_bug.cgi?id=775543
2016-12-05 18:23:31 +02:00
Aleix Conchillo Flaque
bc9f06f37b rtspsrc: always send teardown request
Allow CMD_CLOSE to cancel all commands not only CMD_PAUSE
and ignore CMD_WAIT while closing.

https://bugzilla.gnome.org/show_bug.cgi?id=748360
2016-12-05 11:32:43 +02:00
Edward Hervey
e5158ca496 jitterbuffer: Don't leak duplicate items
When providing items with a seqnum, there is a (very small) probability
that an element with the same seqnum already exists. Don't forget
to free that item if it wasn't inserted.

And avoid returning undefined values when dealing with duplicate items
2016-12-02 09:01:57 +01:00
Edward Hervey
50bb6630f5 qtdemux: Sanitize unknown codec caps
We might have non-printable characters in the unknown fourcc, replace
them with '_', in the same way we do it for unknown tags.
2016-12-02 08:52:06 +01:00
Sebastian Dröge
9a4b1e9cdc avidemux: Free vprp chunk also if it existed but we made no use of it
https://bugzilla.gnome.org/show_bug.cgi?id=775479
2016-12-01 20:04:28 +02:00
Sebastian Dröge
7d6cf17498 matroskademux: Fix memory leak when parsing attachments
gst_tag_image_data_to_image_sample() does not take ownership of the
passed memory, so don't set it to NULL to allow us to free it later.

https://bugzilla.gnome.org/show_bug.cgi?id=775472
2016-12-01 17:38:33 +02:00
Sebastian Dröge
d3bc50bc8f matroskademux: Unify zlib/bzip2 decompress loops with the ones from qtdemux
Especially, simplify the code a bit.
2016-12-01 14:56:18 +02:00
Sebastian Dröge
6939399e96 qtdemux: Increase inflate buffer in bigger steps
1024 bytes is quite small, let's do 4096 bytes (or one page).
Also remove redundant if, we're always in that case when getting here.
2016-12-01 14:44:26 +02:00
Sebastian Dröge
b79655d3c9 qtdemux: Ensure that size of the pasp atom is as much as we need
https://bugzilla.gnome.org/show_bug.cgi?id=775455
2016-12-01 14:30:49 +02:00
Sebastian Dröge
d46cc8df6c qtdemux: Free compressed moov node and it's corresponding decompressed data
https://bugzilla.gnome.org/show_bug.cgi?id=775455
2016-12-01 14:30:10 +02:00