It breaks all the calculations. While it can make sense during
initialization, there's very little API that can be called with such
timecodes without ending up with wrong results.
The old API would only assert or return an invalid timecode, the new API
returns a boolean or NULL. We can't change the existing API
unfortunately but can at least deprecate it.
audioconvert's passthrough status can no longer be determined
strictly from input / output caps equality, as a mix-matrix can
now be specified.
We now call gst_base_transform_set_passthrough dynamically, based
on the return from the new gst_audio_converter_is_passthrough()
API, which takes the mix matrix into account.
The presence of `key-mgmt` attribute will set the mikey appropriately.
We therefore don't need to check the return value (which will
be overwritten afterwards).
CEA608_IN_CEA708_RAW is the same format as CEA708_RAW. It's only
difference is that it must contain only CEA608 and a format like this
does not exist in practice. In practice every element that handles raw
cc_data triplets must check each triplet for their actual content and
handle them accordingly.
For CC-only streams a parser could signal the existence of CEA608 and/or
CEA708 inside the caps but for metas this can only potentially be
signalled via the ALLOCATION query for negotiation purposes.
A separate format for this is not very useful and instead it should be a
format qualifier.
CEA608_S334_1A is the format defined by SMPTE S334-1 Annex A and which
is used for transferring CEA608 over SDI instead of CEA708 CDP packets.
According to RFC3611, the extended report blocks in XR packet can
have variable length. To visit each block, the iterator should look
into block header. Once XR type is extracted, users can parse the
detailed information by given functions.
Loss/Duplicate RLE
The Loss RLE and the Duplicate RLE have same format so
they can share parsers. For unit test, randomly generated
pseudo packet is used.
Packet Receipt Times
The packet receipt times report block has a list of receipt
times which are in [begin_seq, end_seq).
Receiver Reference Time paser for XR packet
The receiver reference time has ntptime which is 64 bit type.
DLRR
The DLRR report block consists of sub-blocks which has ssrc, last RR,
and delay since last RR. The number of sub-blocks should be calculated
from block length.
Statistics Summary
The Statistics Summary report block provides fixed length
information.
VoIP Metrics
VoIP Metrics consists of several metrics even though they are in
a report block. Data retrieving functions are added per metrics.
https://bugzilla.gnome.org/show_bug.cgi?id=789822
Non-direct dmabuf uploads, just as direct dmabuf uploads, create EGL
images and thus GL textures of the same width as the imported image.
The input dmabuf line stride is not relevant to the resulting texture
in both cases.
This fixes the case where non-direct uploads of input dmabufs with line
stride larger than the width will for example cause glcolorconvert to
sample only the left part (width * bytes per pixel / stride) of the
image, causing a horizontally stretched and cropped output image.
Pull in video frame fields into local variables. Without this the
compiler must assume that they could've changed on every use and read
them from memory again.
This reduces the inner loop from 6 memory reads per pixels to 4, and the
number of writes stays at 3.
gst_rtsp_connection_send() adds the Authorization header to the request.
If this function is being called multiple times with the same request
it will add one more Authorization header every time.
To fix to this issue do not append a new Authorization header on
top of an existing ones. Remove any existing Authorization headers first
and then add the new one.
Fixes gst-plugins-good#425
If multiple DRM connectors are connected, currently the first one is
picked. Improve this by adding an environment variable that allows for
choosing a connector by name. The connector name has been made so they
are compatible with modetest/modeprint DRM utilities.
Related to #490
* List all connectors, modes, and encoders, even after picking one
* Add missing DRM_MODE_CONNECTOR_DPI string for logging and improve
existing strings
* Make sure the names matches modetest/modeprint from DRM utilities
Related to #490
If we use the main loop it might happen that the caller (e.g. our unit
test) already shut down the loop once the result was received and in
that case the pipeline would never ever be shut down (and our unit test
would hang).
This adds a few missing gst_object_unref calls for the opengl context in
gstglwindow_gbm_egl.c, as well as the missing close call for the
drm node fd in gst_gl_display_gbm_finalize.
While this creates a circular reference between the pipeline and the
context, this ensures that the context stays alive for as long as any
callbacks could be called on it. The circular reference is broken once
the conversion is finished (or error, or timeout), which will then cause
everything to be freed.
Previously it was possible that a callback could be called on the
context right after it was freed already.
Also use only a single context structure, the second structure does not
simplify anything and duplicates storage.
This patch adds API in the audio decoder base class for setting the arbitrary
caps on the source pad. Previously only caps converted from audio info were
possible. This is particularly useful when subclass wants to set caps features
for audio decoder producing metadata.
The Y210 format was added in the middle of the formats enum and list,
introducing an ABI break.
This issue was detected thanks to the gstreamer-rs test harness.
We assume here the same data format for the user data as for the
DID/SDID: 10 bits with parity in the upper 2 bits. In theory some
standards could define this differently and even have full 10 bits of
user data but there does not seem to be a single such standard after
all these years.
Currently in Python it would become a signed 64 bit value but should
actually be an unsigned 32 bit value with all bits set.
This is the same problem as with GST_MESSAGE_TYPE_ANY.
See https://bugzilla.gnome.org/show_bug.cgi?id=732633
Rather then letting gst_gl_memory_setup_buffer guess the GL format used
for an eglimage after importing a dmabuf be explicit about it. This
fixes issues where dmabuf import may have used another format then
gst_gl_format_from_video_info would guess on the basis of the available
GL extensions.
In particular on etnaviv the gst_gl_format_from_video_info would
assuming a luminance + alpha GL format is used for YUY2, but the dmabuf
import will always use RG88. Which causes images to end up somewhat pink when
displayed on the screen.
When importing an egl image from dmabuf gst_gl_format_from_video_info
was used to work what the result GL format will be. Unfortunately that
will only work if the conventional format and the choosen DRM fourcc for
the format match up.
On etnaviv platforms there is no support for GL_EXT_texture_rg, so the
GL format chosen for YUY2 ends up being GST_GL_LUMINANCE_ALPHA. However
DRM does not do luminance + alpha as it's a legacy GL thing, so the
dmabuf import ends up using DRM_FORMAT_GR88.
To fix this, tie the DRM_FORMAT and the GL format together so they
always match up.
There is new code that ensures that we renegotiate after an
uploader transition if the negotiated caps have changed.
The problem is that the raw uploader will not really try and
fixate the input caps, but instead of return a subset with the
only the supported target texture.
This had two effect, raw uploads was always done renegotiated
once and the raw upload unit test was now failing as it didn't
expect a renegotiation.
As it's a valid check, simply relax the gst_caps_is_equal() check
and use a gst_caps_is_subset() instead.
https://bugzilla.gnome.org/show_bug.cgi?id=783521
The direct dmabuf upload does color conversion, so when it transforms
the caps, it replaces the format with all formats found through the
format query. When this uploader can't be used, it makes the upstream
source pick a unsupported format.
To fix this, we only append the caps with a list of format. So the
source will only pick one of these formats if the downstream preferred
format is not supported. A negotiation failure after this would be
normal.
This fixes pipelines without a glcolorconvert element.
https://bugzilla.gnome.org/show_bug.cgi?id=783521
The idea is that some GPUs (like the Vivante series) can actually
perform the YUV->RGB conversion internally, so no custom conversion
shaders are needed. To make use of this feature, we need an additional
uploader that can import DMABUF FDs and also directly pass the pixel
format, relying on the GPU to do the conversion.
Based on patches from Nicolas Dufresne <nicolas.dufresne@collabora.com> and
Carlos Rafael Giani <dv@pseudoterminal.org>.
https://bugzilla.gnome.org/show_bug.cgi?id=783521
If a upload method is selected then use it exclusively in transform_caps().
Also, reconfigure if the current caps don't match the current upload
method.
https://bugzilla.gnome.org/show_bug.cgi?id=783521
This should not be necessary, but currently not all plugins that provide
dmabuf memory announce this with caps features, e.g. v4l2.
The static caps already contain the system memory. It didn't break before
because other upload methods provide the necessary transformation.
https://bugzilla.gnome.org/show_bug.cgi?id=783521
Reconfigure will trigger a set_caps which clears the upload method.
Remember the method in this case and start with it.
Wrap around once to try all methods if necessary.
https://bugzilla.gnome.org/show_bug.cgi?id=783521
The colorspace conversion happens during the upload so the necessary hints
must be provided to ensure that the conversion works correctly.
At least the Mesa Intel driver will create a texture without error but
produces an incorrect result. Use eglQueryDmaBufModifiersEXT() to check if
non-external upload is supported for the given format.
Based on a patch from Carlos Rafael Giani <dv@pseudoterminal.org>.
https://bugzilla.gnome.org/show_bug.cgi?id=783521
gst_gl_memory_setup_buffer() was not properly using the number
of pointers to wrapped. This also fixes the validation, as we
only support 1 wrapper per view, or num_planes * views wrapper.
https://bugzilla.gnome.org/show_bug.cgi?id=783521
rtsp_connection_send takes care of adding those already,
and some reverse proxies such as nginx will reject the request
altogether if the Authorization header is present twice,
even with the same value.
https://bugzilla.gnome.org/show_bug.cgi?id=797272
Add a source-info property that will read/write meta to the buffers
about RTP source information. The GstRTPSourceMeta can be used to
transport information about the origin of a buffer, e.g. the sources
that is included in a mixed audio buffer.
A new function gst_rtp_base_payload_allocate_output_buffer() is added
for payloaders to use to allocate the output RTP buffer with the correct
number of CSRCs according to the meta and fill it.
RTPSourceMeta does not make sense on RTP buffers since the information
is in the RTP header. So the payloader will strip the meta from the
output buffer.
https://bugzilla.gnome.org/show_bug.cgi?id=761947
Using the correct blend modes for each case or converting to
premultipled in the very unlikely case that separate blend modes are
unavailable on ancient opengl hardware.
It was checking for GST_IS_CAPS only and that would fail if the new
restriction caps was NULL and its documentation says it accepts NULL as
valid input.
