Commit graph

10212 commits

Author SHA1 Message Date
David Svensson Fors
682ae32f6f matroskademux: configurable timestamp gap handling
matroskademux performs segment tricks to skip gaps in streams,
notably at start for non 0 based files.  There may however be
cases when full presentation (including intermediate gaps) is
desired, so a property allows to configure as of which gap
to act (or not at all).

API: GstMatroskaDemux::max-gap-time

Fixes #659009.
2011-09-14 14:49:36 +02:00
Thiago Santos
c78048bc25 tests: flvmux: Fix flvmux's tests after fix for request pads handling
Now that flvmux doesn't release its request pads on PAUSED->READY the
test doesn't need to re-request them for every reuse test start.
2011-09-12 09:21:47 -03:00
Thiago Santos
261d11a6d7 qtmux: Fix ctts generation for streams that don't start at 0 timestamps
Subtract the first timestamp of a stream from all input buffers to
get 0-based timestamps for creating a sane ctts table. Without this
patch the ctts could have larger values than needed, causing the
playback to have a delay at startup.

As the first timestamp is only found after a few buffers are queued
(due to possible reordered buffers), once we find the first timestamp
we subtract it from all buffers on the queue, from that point on,
all buffers have their timestamps subtract when they are collected.

https://bugzilla.gnome.org/show_bug.cgi?id=658659
2011-09-12 07:37:10 -03:00
Alessandro Decina
aea09188dc flvmux: don't release request pads going PAUSED->READY
Don't release request pads but just reset them. This makes pipelines using
flvmux reusable.
2011-09-12 10:00:59 +02:00
Vincent Penquerc'h
d17d13219c ac3parse: use bsid 9 and 10 to control sample rate
See http://matroska.org/technical/specs/codecid/index.html

The spec is silent about this though...

https://bugzilla.gnome.org/show_bug.cgi?id=658546
2011-09-09 13:59:31 +02:00
Mark Nauwelaerts
95b5ece2c9 rtspsrc: ensure some initial state variable setup
... which might otherwise be skipped if the PLAY command is issued before
the OPEN command had a chance to actually be acted upon.

Fixes #657376.
2011-09-09 10:53:08 +02:00
Mark Nauwelaerts
ef1ad78eee matroskademux: tweak gap handling
... so as to avoid buffers before and after gap to have identical running time.
2011-09-08 15:10:43 +02:00
Guillaume Desmottes
06c65418d7 v4l2: use GST_RESOURCE_ERROR_BUSY if v4l2_ioctl fails with EBUSY
https://bugzilla.gnome.org/show_bug.cgi?id=658543
2011-09-08 15:04:42 +02:00
Thiago Santos
ed3adece77 qtmux: remove one G_UNLIKELY for user property
Using G_UNLIKELY on user properties isn't nice, specially when
that is the default option.
2011-09-07 11:46:07 -03:00
Andoni Morales Alastruey
782fc78d57 matroskamux: handle GstForceKeyUnit event
... by starting a new cluster after forwarding event.

Fixes #644154.
2011-09-07 14:51:56 +02:00
Sebastian Dröge
8f1f6d1a57 cmml: Use complete cmml caps in the unit test 2011-09-07 14:30:27 +02:00
Sebastian Dröge
0fd1397921 qtmux: Use complete MPEG caps in the unit test 2011-09-07 14:30:27 +02:00
Stefan Sauer
69869f0839 docs: cleanup makefiles
Remove commented out parts that we don't need. Remove "the wingo addition" - no
so useful after all. Narrow down file-globs for plugin docs.
2011-09-07 14:19:43 +02:00
Konstantin Miller
24d002e04d souphttpsrc: Don't handle HTTP response 407 as error if proxy authentication data is available
Fixes bug #657422.
2011-09-07 13:28:45 +02:00
Sebastian Dröge
c29069fd11 ac3parse: Add Converter to the classification because it can convert between different alignments
This allows decodebin2 to let it negotiate properly.
2011-09-07 12:11:39 +02:00
Sebastian Dröge
786d35f53f audioparsers: Improve src template caps
Remove the parsed/framed fields and add all fields to the template
caps that always exist.
2011-09-07 12:10:48 +02:00
Mark Nauwelaerts
625e7a6143 aacparse: parse codec_data to determine number of samples per frame
Fixes #656734.
2011-09-07 11:20:03 +02:00
Stefan Sauer
2d2e816aee Automatic update of common submodule
From a39eb83 to 11f0cd5
2011-09-06 21:24:46 +02:00
Stefan Sauer
8191c6af1c Automatic update of common submodule
From 605cd9a to a39eb83
2011-09-06 15:40:32 +02:00
Mark Nauwelaerts
aa0ae490d0 matroskamux: make default duration check less sensitive
Frame duration might vary for 1 usecond, in this case matroskamux
decides to create BLOCKGROUP instead of SIMPLEBLOCK.

Convert duration to timecodescale which is (typically) less precise, and
then also allow the difference of 1/-1 to arrange for less sensitive check.

Based on patch by Alexey Fisher <bug-track@fisher-privat.net>

Fixes #653080.
2011-09-06 15:09:13 +02:00
Mark Nauwelaerts
06f8e356a6 rtpmp4gdepay: improve bogus interleaved index compensating
Patch by <gudake@gmail.com>

Fixes #654585.
2011-09-06 13:20:23 +02:00
Sebastian Dröge
7b592ff126 souphttpsrc: Allow positive, non-1.0 segment rates
Only negative rates are not supported. Fixes bug #658305.
2011-09-06 10:34:35 +02:00
Mark Nauwelaerts
077a306054 tests: parsers: provide more real data when testing draining of garbage 2011-09-05 15:51:53 +02:00
Mark Nauwelaerts
b9a54a38b0 amrparse: fix and streamline valid frame checking
... to handle various combinations of sync or not, and sufficient data
or not as might be expected.

Fixes #650714.
2011-09-05 15:51:48 +02:00
Mark Nauwelaerts
4b8ead4340 qtdemux: fragmented support; avoid adjustment for keyframe seek
... since all index data may not yet be available at that time.
2011-09-05 14:56:18 +02:00
Mark Nauwelaerts
08d25a69d5 qtdemux: fragmented support; mark all audio track samples as keyframe 2011-09-05 14:56:18 +02:00
Brian Li
a3e9b676c0 qtdemux: fragmented support; properly init return variable value
Fixes #655918.
2011-09-05 14:56:08 +02:00
Mark Nauwelaerts
2603c2079d rtspsrc: add gtk-doc for new short-header property 2011-09-05 13:32:17 +02:00
Marc Leeman
ce276d903c rtspsrc: allow sending short RTSP requests to a server
Some encoders (Arecont) do not like the long OPTIONS sent at startup as sent by
GStreamer, but do accept the short header as sent by Live555.

This patch makes the extending the request optional by adding a property
(short-header).

Fixes #655805.

API: GstRTSPSrc:short-header
2011-09-05 13:26:06 +02:00
Olivier Crête
d4778dbe43 rtph263ppay: Set H263-2000 if thats what the other side wants
The static caps states this element supports H263-2000, but setcaps never
sets it, so it was lie.

See https://bugzilla.gnome.org/show_bug.cgi?id=577784
2011-09-05 12:58:55 +02:00
Olivier Crête
b2e8362767 rtpsession: Initialise the last_keyframe_request variable 2011-09-02 19:24:46 -04:00
Peter Korsgaard
d73410c4af multiudpsink: make add/remove/clear/get-stats action signals
http://bugzilla.gnome.org/show_bug.cgi?id=657830

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2011-09-01 22:54:27 +01:00
Mark Nauwelaerts
e15d29ffe4 qtdemux: push mode; perform some extra checks prior to upstream seeking 2011-08-30 14:24:04 +02:00
Mark Nauwelaerts
9de9d7e4d4 qtdemux: push mode; fix buffered streaming
That is, in case where no seek is peformed to moov, but preceding
limited mdat is buffered.
2011-08-30 14:23:49 +02:00
Mark Nauwelaerts
5ea19b0696 qtdemux: avoid overflow wraparound in timestamp when adding durations
Do some type juggling to avoid overflow, while still allowing for 'negative'
durations (which would need a wraparound effect).
2011-08-29 15:16:16 +02:00
Vincent Penquerc'h
3968dc7688 v4l2src: make this work more than once in a row
We used to skip frame rate setup if the camera was already setup
with the requested frame rate. This breaks some cameras though,
causing them to not output data (several models of Thinkpad cameras
have this problem at least).
So, don't skip.

https://bugzilla.gnome.org/show_bug.cgi?id=638300
2011-08-26 10:33:10 +02:00
Vincent Penquerc'h
f3fc3e1f69 aacparse: only require two frames in a row when we do not have sync
This avoids a single bit error dropping two frames unnecessarily.
The two consecutive frames check is still required when we don't
have sync.

https://bugzilla.gnome.org/show_bug.cgi?id=657080
2011-08-24 08:26:31 +02:00
Arun Raghavan
bd604175c5 pulsesink: Trivial indentation fix 2011-08-23 22:48:34 +05:30
Monty Montgomery
799c8e3d04 flacdec: Correct sample number rounding resulting in timestamp jitter
flacdec converts the src timestamp to a sample number, uses that internally, then reconverts the sample number to a timestamp for the output buffer.  Unfortunately, sample numbers can't be represented in an integer number of nanoseconds, and the conversion process was truncating rather than rounding, resulting in sample numbers and output timestamps that were often off by a full sample.

This corrects the time->sample convesion
2011-08-23 10:09:41 +02:00
David Schleef
88557c4792 breakmydata: element is not passthrough 2011-08-21 15:15:14 -07:00
David Schleef
2a83da13fc multifilesrc: quiet debugging 2011-08-21 15:15:14 -07:00
David Schleef
0446787e65 deinterlace: change field handling through methods
This likely breaks stuff.  The good: all of the methods now create
field images aligned with input frames, without timestamp mangling.
The bad: this touches a lot of code, much of which is hairy and in
need of cleanup.  However, at this point we can reasonably create a
PSNR-based test.
2011-08-21 15:15:14 -07:00
Alessandro Decina
ad996feb28 multifilesink: reset ->streamheaders to NULL on _stop
Fixes invalid memory access reusing multifilesink
2011-08-21 14:41:59 +02:00
David Henningsson
e70020b456 pulsesink: Allow writes in bigger chunks
There's no use in splitting the incoming data down to the segsize
limit - by writing as much as possible in one chunk, we increase
performance and avoid PulseAudio unnecessary rewinds.

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
2011-08-19 09:48:27 +02:00
Vincent Penquerc'h
e032d26674 matroskademux: ensure no-more-pads is always emitted
In particular, do so even if failing to read while prerolling,
such as when reading from a partial file (eg, while it is being
downloaded).

This fixes a wedge in playbin2.

https://bugzilla.gnome.org/show_bug.cgi?id=651965
2011-08-18 11:30:07 +02:00
Vincent Penquerc'h
3e0134f51f flacdec: avoid timestamp/offset tracking going out of sync
The libFLAC API is callback based, and we must only call it to
output data when we know we have enough input data. For this
reason, a single processing step is done when receiving a buffer.
However, if there were metadata buffers still pending, a step
intended for the first audio frame might end up writing that
leftover metadata. Since a single step is done per buffer, this
will cause every buffer to be written one step late.

This would add some latency (a bufferfull's worth), possibly
lose a buffer when seeking or the like, and also cause timestamp
and offset to be applied to the wrong buffer, as updates to
the "current" segment last_stop (from incoming buffer timestamp)
will be applied to an output buffer originating from the previous
incoming buffer.

This fixes the issue by ensuring that, upon receiving the first
audio frame, processing is done till all metadata is processed,
so the next "single step" done will be for the audio frame. After
this, we should keep to 1 input buffer -> 1 output buffer and so
avoid getting out of sync.

https://bugzilla.gnome.org/show_bug.cgi?id=650960
2011-08-17 13:40:59 +01:00
Vincent Penquerc'h
e09eb95a5f flacdec: bail on reserved value
Now that we look at the right bits, we can test against the reserved
value as we do for other fields.

https://bugzilla.gnome.org/show_bug.cgi?id=650960
2011-08-17 00:02:38 +01:00
Vincent Penquerc'h
64beef4610 flacdec: fix bit twiddling
Right shifting a 8 bit value by 8 bits is twice too much
to get the high 4 bits.

https://bugzilla.gnome.org/show_bug.cgi?id=650960
2011-08-17 00:01:37 +01:00
Vincent Penquerc'h
1549aaba27 flacdec: warn if we see a variable block size where unsupported
https://bugzilla.gnome.org/show_bug.cgi?id=650960
2011-08-17 00:01:07 +01:00
Vincent Penquerc'h
f8a9f5bc1c spectrum: avoid crashing by resetting the correct number of channels
https://bugzilla.gnome.org/show_bug.cgi?id=656606
2011-08-16 22:44:07 +01:00