Original commit message from CVS:
Patch by: Tommi Myöhänen <ext-tommi dot myohanen at nokia dot com>
* ext/alsa/gstalsasink.c: (set_hwparams), (gst_alsasink_delay):
Add some more debug info.
Make sure we never return a negative delay. Fixes#516246.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_delay):
Revert patch that makes the sink hold the object lock when
calling snd_pcm_delay(), since it breaks playback for me.
Original commit message from CVS:
* ext/alsa/gstalsa.h: (GST_CHECK_ALSA_VERSION):
* ext/alsa/gstalsasink.c: (set_swparams):
* ext/alsa/gstalsasrc.c: (set_swparams), (gst_alsasrc_open):
Don't use snd_pcm_sw_params_set_xfer_align() if we're compiling
against libasound >= 1.0.16, since it's been deprecated in
0.10.16, and alignment is always 1 then, apparently. (#512899)
Original commit message from CVS:
2008-02-11 Julien Moutte <julien@fluendo.com>
Patch by: Alan Peevers <peeves@pacbell.net>
* ext/alsa/gstalsasink.c: (gst_alsasink_delay): Take appropriate
lock when calling alsa methods.
Original commit message from CVS:
Patch by: Bastien Nocera <hadess at hadess net>
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_get_volume),
(check_if_volumes_are_the_same), (gst_alsa_mixer_set_volume):
Use snd_mixer_selem_set_{playback|capture}_volume_all() if
the volume is the same for all channels. This works around
some problem in alsa that leaves us with inconsistent state
for some reason (#486840).
Original commit message from CVS:
Patch by: Jerone Young <jerone at gmail com>
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_find_master_mixer):
If there's no mixer track by the name of 'Master' or 'Front',
check if there's one called 'PCM' before trying the generic
fallback logic (fixes#506928, where we pick 'Mic' as master
track for the AD1984 card in a Thinkpad T61/X61 laptop).
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_open):
* ext/alsa/gstalsasrc.c: (gst_alsasrc_open):
'Could not open resource for writing' is not an acceptable
error message when we can't open the audio device (see #492334),
even less so when we're trying to open it to record something.
Original commit message from CVS:
* ext/alsa/gstalsa.c:
* ext/alsa/gstalsadeviceprobe.c:
* ext/alsa/gstalsamixer.c:
* ext/alsa/gstalsasink.c:
* ext/alsa/gstalsasrc.c:
Change alsa alloca's to malloc to fix warnings on gcc-4.2.
Original commit message from CVS:
* ext/alsa/Makefile.am:
There is no GST_PLUGINS_BASE_LIBS defined.
* ext/alsa/gstalsa.c:
* ext/alsa/gstalsasink.c: (gst_alsasink_delay):
* ext/alsa/gstalsasrc.c: (gst_alsasrc_delay):
Add support for ALSA 24-bit formats.
snd_pcm_delay can return an error code, especially
during XRUNS. In that case, the best we can do is assume
delay = 0.
* gst/audioconvert/Makefile.am:
Add flags from -base before any more-remote dependencies.
Original commit message from CVS:
* ext/alsa/gstalsamixer.c (source, n_poll_fds, poll_fds,
gst_alsa_mixer_check, gst_alsa_mixer_dispatch,
gst_alsa_mixer_finalize, gst_alsa_mixer_handle_source_callback,
gst_alsa_mixer_handle_callback, gst_alsa_mixer_elem_handle_callback,
gst_alsa_mixer_ensure_track_list, gst_alsa_mixer_update_option,
gst_alsa_mixer_update_track):
Apply some of the cleanup Tim suggested in #152864 afterwards.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_open):
Extra log line.
* ext/pango/gstclockoverlay.c: (gst_clock_overlay_init):
* ext/pango/gsttimeoverlay.c: (gst_time_overlay_init):
Use pango_font_description_set_family_static instead of
pango_font_description_set_family to save a string copy (it was
leaking due to the strdup anyway)
* gst/tcp/gsttcpclientsink.c: (gst_tcp_client_sink_finalize):
* gst/tcp/gsttcpclientsrc.c: (gst_tcp_client_src_finalize):
* gst/tcp/gsttcpserversink.c: (gst_tcp_server_sink_finalize):
* gst/tcp/gsttcpserversrc.c: (gst_tcp_server_src_finalize):
Chain up in finalize.
Original commit message from CVS:
* gst-libs/gst/interfaces/mixertrack.c:
(gst_mixer_track_class_init), (gst_mixer_track_get_property),
(gst_mixer_track_set_property):
API: add "untranslated-label" property which should be set by
implementations at construct time (#414645).
* ext/alsa/gstalsamixeroptions.c: (gst_alsa_mixer_options_new):
* ext/alsa/gstalsamixertrack.c: (gst_alsa_mixer_track_new):
Set "untranslated-label" when constructing mixer track objects.
* tests/check/elements/alsa.c: (GST_START_TEST), (alsa_suite):
Unit test to check the above.
Original commit message from CVS:
Patch by: Loïc Minier <lool+gnome at via ecp fr>
* configure.ac:
* ext/alsa/Makefile.am:
* gst/audiotestsrc/Makefile.am:
Fix compilation with LDFLAGS='-Wl,-z,defs' (#410963).
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_reset):
Ignore errors in reset, these are not fatal. They also grab the element
lock which is already taking when this function is called. Fixes
#405451.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_find_device_name):
Try to get devic-name from device string first, and from handle only
as fallback (seems to yield better results and is more robust
against buggy probing code on the application side).
Original commit message from CVS:
Based on patch by: Julien Puydt <julien.puydt at laposte net>
* ext/alsa/gstalsa.c: (gst_alsa_find_device_name_no_handle),
(gst_alsa_find_device_name):
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsasink.c: (gst_alsasink_get_property):
* ext/alsa/gstalsasrc.c: (gst_alsasrc_get_property):
Improve device-name detection a bit, especially in the case where
the device is not actually open (#405020, #405024). Move common code
into gstalsa.c instead of duplicating it.
Original commit message from CVS:
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_find_master_mixer),
(gst_alsa_mixer_ensure_track_list):
Try harder to guess which mixer track is the master mixer
track (instead of just taking the first one that has a pvolume).
Fixes#342228.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (xrun_recovery), (gst_alsasink_write):
* ext/alsa/gstalsasrc.c: (xrun_recovery), (gst_alsasrc_read):
Use DEBUG_OBJECT more.
Original commit message from CVS:
Patch by: Viktor Peters <viktor dot peters at gmail dot com>
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_ensure_track_list),
(gst_alsa_mixer_update), (gst_alsa_mixer_get_volume),
(gst_alsa_mixer_set_volume), (gst_alsa_mixer_set_mute),
(gst_alsa_mixer_set_record):
* ext/alsa/gstalsamixertrack.c:
(gst_alsa_mixer_track_update_alsa_capabilities),
(alsa_track_has_cap), (gst_alsa_mixer_track_new),
(gst_alsa_mixer_track_update):
* ext/alsa/gstalsamixertrack.h:
Improve and fix mixer track handling, in particular better handling
of alsa's pvolume/pswitch/cvolume/cswitch capabilities; create separate
track objects for tracks that have both capture and playback volume
(and label them differently as well so they're not mistakenly
assumed to be duplicates); classify mixer tracks that only affect
the audible volume of something (rather than the capture volume)
as playback tracks. Redefine/fix meaning of RECORD and MUTE flags
for capture tracks to correspond to alsa-pswitch alsa-cswitch
(following the meaning documented in the mixer interface header
file); add support for alsa's exclusive cswitch groups; update/sync
state/flags better if mixer settings are changed by another
application. Fixes#336075.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_set_property),
(gst_alsasink_open):
* ext/alsa/gstalsasrc.c: (gst_alsasrc_set_property),
(gst_alsasrc_open):
Avoid setting and using a NULL device name.
Print more info when we fail to open a device.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_detect_rates),
(gst_alsa_detect_channels), (gst_alsa_probe_supported_formats):
Small code cleanup.
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_open),
(gst_alsa_mixer_new):
Remove hack that always set the device to hw:0*.
Properly find the card name for whatever device was configured.
Do some better debugging.
Fixes#350784.
* ext/alsa/gstalsamixerelement.c:
(gst_alsa_mixer_element_set_property),
(gst_alsa_mixer_element_change_state):
Cleanups.
Handle setting of a NULL device name better.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (caps_add_channel_configuration),
(gst_alsa_detect_channels):
* ext/alsa/gstalsasink.c:
Add support for cards that (only) do more than 8 channels,
like the Delta 44 (#345188).
* gst-libs/gst/audio/multichannel.c:
(gst_audio_check_channel_positions):
* gst-libs/gst/audio/multichannel.h:
API: add GST_AUDIO_CHANNEL_POSITION_NONE, which stands for an
unspecified channel position and cannot be combined with any
of the other audio channel positions; adjust position layout
checks accordingly (#345188).
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (set_hwparams), (gst_alsasink_prepare):
Don't try to calculate silence samples, base class does this much
better now.
* gst-libs/gst/audio/gstringbuffer.c: (build_linear_format),
(gst_ring_buffer_debug_spec_caps), (gst_ring_buffer_parse_caps),
(gst_ring_buffer_acquire):
Calculate silence samples correctly.
* gst-libs/gst/audio/gstringbuffer.h:
Add _CAST macro.
Original commit message from CVS:
* ext/alsa/gstalsamixerelement.c:
(gst_alsa_mixer_element_change_state):
Make state change fail if the specified device can't be opened
for some reason.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (caps_add_channel_configuration):
Fix typo, so that alsasink also advertises 8 channels
if that's supported (tags: can, worms, open, alsa, ph34r).
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (set_hwparams), (gst_alsasink_prepare):
* gst-libs/gst/audio/gstringbuffer.c: (build_linear_format),
(gst_ring_buffer_debug_spec_caps), (gst_ring_buffer_parse_caps):
Revert last two changes that broke the freeze.
Original commit message from CVS:
Patch by: Michael Sheldon <webmaster at mikeasoft com>
* ext/alsa/gstalsasrc.c:
Add 32 bps to template caps and increase channels range
from [1,2] to [1,MAX]. See #346326.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (set_hwparams):
If we fail to set the buffer_time and period_time alsa
parameters, post a warning and leave alsa select a
default instead of failing. Fixes#342085
Original commit message from CVS:
* ext/alsa/gstalsadeviceprobe.c: (gst_alsa_get_device_list),
(gst_alsa_device_property_probe_probe_property),
(gst_alsa_device_property_probe_needs_probe),
(gst_alsa_device_property_probe_get_values),
(gst_alsa_type_add_device_property_probe_interface):
* ext/alsa/gstalsadeviceprobe.h:
* ext/alsa/gstalsamixerelement.c:
(gst_alsa_mixer_element_init_interfaces):
* ext/alsa/gstalsamixerelement.h:
Clean up and simplify alsa device probing. Make it actually work
for multiple classes. Don't cache results any longer.
* ext/alsa/gstalsasink.c: (gst_alsasink_init_interfaces),
(gst_alsasink_init):
* ext/alsa/gstalsasrc.c: (gst_alsasrc_dispose),
(gst_alsasrc_interface_supported), (gst_implements_interface_init),
(gst_alsasrc_init_interfaces), (gst_alsasrc_set_property):
Make alsasink and alsasrc implement the GstPropertyProbe interface
for device probing (#342181).
Patch by: Martin Szulecki <gnomebugzilla at sukimashita com>
Original commit message from CVS:
* ext/alsa/Makefile.am:
* ext/alsa/gstalsa.c: (gst_alsa_detect_rates),
(gst_alsa_detect_formats), (get_channel_free_structure),
(caps_add_channel_configuration), (gst_alsa_detect_channels),
(gst_alsa_probe_supported_formats):
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsasink.c: (gst_alsasink_getcaps):
Refactor and improve caps probing code: probe signedness
when we probe the supported formats/widths; set endianness
to the one we actually probed for (ie. cpu endianness).
* ext/alsa/gstalsasrc.c: (gst_alsasrc_init), (gst_alsasrc_getcaps),
(gst_alsasrc_close):
* ext/alsa/gstalsasrc.h:
Implement caps probing for alsasrc.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_finalise),
(gst_alsasink_init):
* ext/alsa/gstalsasink.h:
Don't leak allocated snd_output_t structure if there's
more than one alsasink instance at a time (#341873).
Also fix GObject macros in header file.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_getcaps),
(alsasink_parse_spec):
query witdh capabilities from alsa, fixes#338919
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (set_hwparams), (alsasink_parse_spec):
More debug to trace why my USB headset is not working with gst
Original commit message from CVS:
* gst/playback/gststreamselector.c:
(gst_stream_selector_set_property),
(gst_stream_selector_bufferalloc):
Preserve the existing buggy streamselector behaviour by performing
a fallback buffer allocation when downstream isn't linked yet.
This should really be fixed in playbin by blocking pads until it's
linked them.
Also, use gst_pad_alloc_buffer instead of
gst_pad_alloc_buffer_and_set.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_finalise):
Chain up to the parent finalize method.
Add 32-bit sample size to the template caps.
* gst-libs/gst/riff/riff-media.c: (gst_riff_create_video_caps),
(gst_riff_create_video_template_caps):
Add the fourcc that the VMWare codec uses.
* gst/playback/gststreamselector.c:
(gst_stream_selector_set_property),
(gst_stream_selector_bufferalloc),
(gst_stream_selector_request_new_pad):
For the active pad, forward buffer-alloc requests, otherwise
return GST_FLOW_NOT_LINKED. This also prevents xvimagesink
having to memcpy every frame when used by playbin.
* gst/tcp/gstmultifdsink.c:
(gst_multi_fd_sink_handle_client_write):
Get negotiated caps from the sink pad, rather than the sink
pad's peer.
Original commit message from CVS:
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_get_volume):
Fix issues with mixer keeping state when muting/unmuting
and when changing the volume whilst muted (see #331763
and #331765).
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_open),
(gst_alsasink_reset):
Also release lock when we get an error in _reset();
fix an error message.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_class_init),
(gst_alsasink_init), (get_channel_free_structure),
(caps_add_channel_configuration), (gst_alsasink_getcaps),
(gst_alsasink_close):
* ext/alsa/gstalsasink.h:
Add support for more than 2 channels (#326720).
Original commit message from CVS:
2006-02-09 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/audio/gstringbuffer.c
(gst_ring_buffer_samples_done): Cast to guint64, fixes an integer
overflow after 13.5 hours of recording. Kapow!
* ext/alsa/gstalsasrc.c (gst_alsasrc_delay): Clamp the delay to
the buffer size -- we don't care about underrun/overrun reporting
right now, just need to return a useful value.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_finalise),
(gst_alsasink_class_init), (gst_alsasink_init),
(gst_alsasink_write), (gst_alsasink_reset):
* ext/alsa/gstalsasink.h:
Add lock to protect alsa calls.
Implement reset to flush samples ASAP, does not work
with dmix though.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_init), (set_hwparams),
(set_swparams), (gst_alsasink_prepare), (gst_alsasink_unprepare),
(gst_alsasink_close), (gst_alsasink_write), (gst_alsasink_reset):
* ext/alsa/gstalsasrc.c: (gst_alsasrc_init), (set_hwparams),
(set_swparams), (gst_alsasrc_open), (gst_alsasrc_prepare),
(gst_alsasrc_unprepare), (gst_alsasrc_read):
Update all error messages. All of them should either use
the default translated message, or actually provide a
translatable string.
Make the string for channel count problems meaningful.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_finalise),
(gst_alsasink_class_init):
Free the device name string.
* ext/ogg/gstoggmux.c: (gst_ogg_mux_class_init),
(gst_ogg_mux_request_new_pad), (gst_ogg_mux_release_pad),
(gst_ogg_mux_handle_src_event), (gst_ogg_mux_clear_collectpads):
Don't remove a pad from the collectpads structure until it
is released - it's a request pad, and may receive data again
if the element gets moved back to PLAYING state.
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_get_xv_support):
Ensure we turn on double buffering on the Xv port, and
set the colour key to something dark and mysterious that
isn't black.
Original commit message from CVS:
* ext/alsa/gstalsaplugin.c: (plugin_init):
* ext/cdparanoia/gstcdparanoiasrc.c:
(gst_cd_paranoia_src_base_init), (plugin_init):
* ext/gnomevfs/gstgnomevfs.c: (plugin_init):
* ext/ogg/gstoggdemux.c: (gst_ogg_demux_plugin_init):
- a library should not call setlocale. see Libraries node in
gettext manual
- make sure all plugins that use translation do bindtextdomain
to point to the localedir
* gst/playback/gstplaybin.c: (gen_vis_element), (add_sink),
(setup_sinks), (plugin_init):
all this, and check for NULL when creating sinks
Original commit message from CVS:
* ext/alsa/Makefile.am:
* ext/alsa/gstalsadeviceprobe.c:
* ext/alsa/gstalsadeviceprobe.h:
Helper functions to add device probing via the GstPropertyProbe
interface to a class.
* ext/alsa/gstalsamixer.h:
Comment out GST_ALSA_MIXER, it returns a struct that's not
used.
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_open):
Add some debug info.
* ext/alsa/gstalsamixerelement.c:
(gst_alsa_mixer_element_interface_supported),
(gst_implements_interface_init),
(gst_alsa_mixer_element_init_interfaces),
(gst_alsa_mixer_element_class_init),
(gst_alsa_mixer_element_finalize), (gst_alsa_mixer_element_init),
(gst_alsa_mixer_element_set_property),
(gst_alsa_mixer_element_get_property),
(gst_alsa_mixer_element_change_state):
* ext/alsa/gstalsamixerelement.h:
Add 'device' and 'device-name' properties. Add GstPropertyProbe
for device handling (gnome-volume-control will need that).
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_open):
check for ALSA errors properly, instead of relying on ALSA's
error strings to serve to the user.
Original commit message from CVS:
* ext/alsa/gstalsasink.c:
Also allow unsigned int.
* gst-libs/gst/audio/gstbaseaudiosrc.c:
(gst_base_audio_src_create), (gst_base_audio_src_change_state):
Small cleanup
Original commit message from CVS:
2005-08-22 Andy Wingo <wingo@pobox.com>
* ext/alsa/gstalsasink.c (gst_alsasink_get_property):
* ext/alsa/gstalsasrc.c (gst_alsasrc_get_property): Add a
device-name property.
Original commit message from CVS:
2005-08-22 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/audio/gstaudiosrc.h:
* gst-libs/gst/audio/gstaudiosrc.c: Implement open_device and
close_device in the ring buffer, like gstaudiosink.
* ext/alsa/gstalsamixer.h:
* ext/alsa/gstalsamixer.c: Not a GObject any more. Include a nifty
macro to implement the interface without much code. Cleanups.
* ext/alsa/gstalsasrc.h:
* ext/alsa/gstalsasrc.c: Be a mixer. Open device and mixer in
READY.
* ext/alsa/Makefile.am: Add new files.
* ext/alsa/gstalsamixerelement.c:
* ext/alsa/gstalsamixerelement.c: Split element code out from
mixer code so that alsasrc can be a mixer too.
Original commit message from CVS:
2005-08-19 Andy Wingo <wingo@pobox.com>
* ext/alsa/gstalsamixertrack.h:
* ext/alsa/gstalsamixertrack.c:
* ext/alsa/gstalsamixeroptions.h:
* ext/alsa/gstalsamixeroptions.c:
* ext/alsa/gstalsamixer.h:
* ext/alsa/gstalsamixer.c: Port to 0.9.
* ext/alsa/Makefile.am: Build mixer, mixeroptions, mixertracks.
Remove gstalsa.c and alsaclock. No more cruft here.
Original commit message from CVS:
2005-08-08 Andy Wingo <wingo@pobox.com>
* gst-libs/gst/audio/gstbaseaudiosink.c
(gst_base_audio_sink_change_state): Open the device in NULL->READY
like good elements should. Close on READY->NULL too.
* gst-libs/gst/audio/gstaudiosink.c
(gst_audioringbuffer_open_device,
(gst_audioringbuffer_close_device, gst_audioringbuffer_acquire)
(gst_audioringbuffer_release): Updates for new ring buffer API,
hook into the new audio sink api.
* gst-libs/gst/audio/gstaudiosink.h (GstAudioSinkClass.open)
(GstAudioSinkClass.close): Just open and close the device -- no
resource allocation or configuration.
(GstAudioSinkClass.prepare, GstAudioSinkClass.unprepare): New
vmethods, handle device setup and resource allocation.
* ext/alsa/gstalsasink.c (gst_alsasink_open, gst_alsasink_close)
(gst_alsasink_prepare, gst_alsasink_unprepare): Update for new
base class API.
* gst-libs/gst/audio/gstringbuffer.h
(GstRingBufferClass.open_device, GstRingBufferClass.close_device):
New vmethods.
* gst-libs/gst/audio/gstringbuffer.c (gst_ring_buffer_open_device)
(gst_ring_buffer_close_device, gst_ring_buffer_device_is_open):
New API functions. The device should be opened before acquiring
and closed after releasing.
Original commit message from CVS:
* common/gtk-doc-plugins.mak:
* docs/plugins/Makefile.am:
* docs/plugins/gst-plugins-base-plugins-docs.sgml:
* docs/plugins/gst-plugins-base-plugins-sections.txt:
renamed to actual element names, so much nicer to look at
* docs/plugins/tmpl/gstmultifdsink.sgml:
remove
* docs/plugins/tmpl/multifdsink.sgml:
* docs/plugins/tmpl/tcpserversink.sgml:
add
* ext/alsa/gstalsa.c:
* ext/cdparanoia/gstcdparanoia.c: (cdparanoia_get_property):
* ext/ogg/gstoggmux.c:
* gst/audioconvert/gstaudioconvert.c: (gst_audio_convert_chain):
* gst/playback/gstdecodebin.c:
* gst/tcp/gstmultifdsink.c: (gst_multifdsink_class_init):
* gst/tcp/gsttcpserversink.c:
various fixes and documentation additions
Original commit message from CVS:
2005-07-29 Andy Wingo <wingo@pobox.com>
* ext/alsa/gstalsaplugin.c (plugin_init): We are primary audio
sinks.
* ext/alsa/gstalsasink.c (alsasink_sink_factory): Advertise our
support of both endiannesses.
Original commit message from CVS:
make GST_PLUGIN_LDFLAGS only be flags; GST_LIBS should be
added manually to each Makefile.am so we are sure it goes
*last* and doesn't add -L flags before linking in libs of our
own, like, say, internal .la libs, that then accidentally pick
up the installed copy.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (set_hwparams), (gst_alsasink_open):
Get actual segment size and buffer size after opening
the device.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsasink_open):
Open non-blocking, set to blocking mode afterwards to avoid
lockups when audio device is busy.
Original commit message from CVS:
* ext/a52dec/gsta52dec.c: (gst_a52dec_push),
(gst_a52dec_handle_event), (gst_a52dec_chain):
Add some debug output. Check that a discont has a valid
time associated.
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event),
(gst_alsa_sink_loop):
Ignore TAG events. A little extra debug for broken timestamps.
* ext/dvdnav/dvdnavsrc.c: (dvdnavsrc_init), (dvdnavsrc_loop),
(dvdnavsrc_change_state):
Ensure we send a discont to engage the link before we send any
other events.
* ext/dvdread/dvdreadsrc.c: (dvdreadsrc_init),
(dvdreadsrc_finalize), (_close), (_open), (_seek_title),
(_seek_chapter), (seek_sector), (dvdreadsrc_get),
(dvdreadsrc_uri_get_uri), (dvdreadsrc_uri_set_uri):
Handle URI of the form dvd://title[,chapter[,angle]]. Currently only
dvd://title works in totem because typefinding sends a seek that ends
up going back to chapter 1 regardless.
* ext/mpeg2dec/gstmpeg2dec.c:
* ext/mpeg2dec/gstmpeg2dec.h:
Output correct timestamps and handle disconts.
* ext/ogg/gstoggdemux.c: (get_relative):
Small guard against a null dereference.
* ext/pango/gsttextoverlay.c: (gst_textoverlay_finalize),
(gst_textoverlay_set_property):
Free memory when done. Don't call gst_event_filler_get_duration on
EOS events. Use GST_LOG and GST_WARNING instead of g_message and
g_warning.
* ext/smoothwave/gstsmoothwave.c: (gst_smoothwave_init),
(draw_line), (gst_smoothwave_dispose), (gst_sw_sinklink),
(gst_sw_srclink), (gst_smoothwave_chain):
Draw solid lines, prettier colours.
* gst/mpeg2sub/gstmpeg2subt.c: (gst_mpeg2subt_init):
Add a default palette that'll work for some movies.
* gst/mpegstream/gstdvddemux.c: (gst_dvd_demux_init),
(gst_dvd_demux_handle_dvd_event), (gst_dvd_demux_send_discont),
(gst_dvd_demux_send_subbuffer), (gst_dvd_demux_reset):
* gst/mpegstream/gstdvddemux.h:
* gst/mpegstream/gstmpegdemux.c: (gst_mpeg_demux_send_discont),
(gst_mpeg_demux_parse_syshead), (gst_mpeg_demux_parse_pes):
* gst/mpegstream/gstmpegparse.c: (gst_mpeg_parse_init),
(gst_mpeg_parse_handle_discont), (gst_mpeg_parse_parse_packhead):
* gst/mpegstream/gstmpegparse.h:
Use PTM/NAV events when for timestamp adjustment when connected to
dvdnavsrc. Don't use many discont events where one suffices.
* gst/playback/gstplaybasebin.c: (group_destroy),
(gen_preroll_element), (gst_play_base_bin_add_element):
* gst/playback/gstplaybasebin.h:
Make sure we remove subtitles from the same bin we put them in.
* gst/subparse/gstsubparse.c: (convert_encoding), (parse_subrip),
(gst_subparse_buffer_format_autodetect),
(gst_subparse_change_state):
Fix some memleaks and invalid accesses.
* gst/typefind/gsttypefindfunctions.c: (ogganx_type_find),
(oggskel_type_find), (cmml_type_find), (plugin_init):
Some typefind functions for Annodex v3.0 files
* gst/wavparse/gstwavparse.h:
GstRiffReadClass is the correct parent class.
Original commit message from CVS:
* ext/alsa/gstalsaclock.c: (gst_alsa_clock_wait):
Sanity check, don't wait endlessly since the clock might not
actually run at this point (which is a deadlock). Fixes#164069.
Original commit message from CVS:
* TODO:
delete this file, it is by far outdated
* ext/alsa/gstalsa.1: remove
* ext/alsa/gstalsa.c: (add_rates), (add_channels), (gst_alsa_caps),
(gst_alsa_check_sample_rates), (gst_alsa_rates_probe),
(gst_alsa_get_caps):
Add HW probing for supported sample rates. Fixes#161704
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_class_init), (gst_alsa_get_caps):
* ext/alsa/gstalsa.h:
Add HW probing for period_count/size and buffer_size MIX/MAX
Adjust default/user defined value if out of bounds
Should fix bug #162024
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_change_state):
Reset variables on READY.
* gst/matroska/matroska-mux.c: (gst_matroska_mux_request_new_pad),
(gst_matroska_mux_loop):
Require data before writing header.
Original commit message from CVS:
* configure.ac:
Fix indentation, fix v4l2 plugin detection.
* ext/Makefile.am:
Fix libmms location (Maciej, use diff -u!).
* ext/alsa/gstalsa.c: (gst_alsa_init):
Initialize caps cache to NULL.
* gst/playback/gstplaybin.c: (gst_play_bin_change_state):
Only change state on audiosink if it exists.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsa_sink_loop):
Fix for integer overflow. Makes #156001 not crash. Probably masks
the real bug.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_get_caps), (gst_alsa_close_audio):
* ext/alsa/gstalsa.h:
refactor big chunks of the core caps negotiation code to make it
a lot faster, because people claim it's really slow
(actually, just cache the getcaps when the device is opened)
Original commit message from CVS:
2004-11-28 Martin Soto <martinsoto@users.sourceforge.net>
* ext/alsa/gstalsasink.c (gst_alsa_sink_loop):
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsa.c (gst_alsa_set_clock):
Make alsasink actually honor gst_element_set_clock and use that
clock instead of ist internal one.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_get_caps):
Don't omit the last (which incase of dmix is the only :) )
channel count. Don't set channels if <= 2.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_pcm_wait):
add debugging
* ext/alsa/gstalsasink.c: (gst_alsa_sink_loop):
do a wait when we enter the loop func with no data available to
write instead of getting into an 100% CPU loop by just returning and
being called again by the scheduler
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsa_sink_loop):
Fix for negotiation order problem. This would show when the
ALSA loopfuction was called before any other function. ALSA
wouldn't do anything because we're not negotiated yet, leading
to an infinite loop. Showed in e.g. Rhythmbox. Fixes#158006.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_change_state):
Only set hardware parameters *after* negotiation. Before
negotiation, it will set ANY and that seems to cause crashes
(see e.g. #151288, #153227).
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsa_sink_get_time):
This seems to be antique leftover. It needs to pass error
checking.
* ext/sdl/sdlvideosink.c: (gst_sdlvideosink_init),
(gst_sdlvideosink_deinitsdl), (gst_sdlvideosink_initsdl),
(gst_sdlvideosink_destroy), (gst_sdlvideosink_create),
(gst_sdlvideosink_sinkconnect), (gst_sdlvideosink_chain):
Fix GstXOverlay implementation (#151059).
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_get_caps_internal):
buffer-frames property was missing
* ext/arts/gst_arts.c:
rate missing from sinkcaps
* ext/audiofile/gstafparse.c:
* ext/audiofile/gstafsink.c:
* ext/audiofile/gstafsrc.c:
* ext/swfdec/gstswfdec.c:
int audio doesn't know buffer-frames
* ext/cdparanoia/gstcdparanoia.c:
int audio doesn't know chunksize either
* ext/nas/nassink.c:
it's endianness, not endianess
* gst-libs/gst/audio/audio.h:
make float standard pad template caps really describe float
* gst/law/mulaw.c: (linear_factory):
signed only, please
* gst/mpegstream/gstdvddemux.c:
widths of 20 are not valid
Original commit message from CVS:
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_update),
(gst_alsa_mixer_get_volume), (gst_alsa_mixer_set_volume),
(gst_alsa_mixer_set_mute), (gst_alsa_mixer_set_record),
(gst_alsa_mixer_set_option), (gst_alsa_mixer_get_option):
Update mixer (to sync with other sessions) if we try to obtain
a new value. This makes alsamixer work accross applications.
* ext/alsa/gstalsasink.c: (gst_alsa_sink_get_time):
Only call sync functions if we're running, else alsalib asserts.
* ext/ogg/gstoggdemux.c: (gst_ogg_demux_src_query):
Sometimes fails to compile. Possibly a gcc bug.
* gst/playback/gstplaybin.c: (gen_video_element),
(gen_audio_element):
Add a reference to an application-provided object, because we lose
this same reference if we add it to the bin. If we don't do this,
we can only use this object once and thus crash if we go from
ready to playing, back to ready and back to playing again.
Also add an audioscale element because several cheap soundcards -
like mine - don't support all samplerates.
* sys/ximage/ximagesink.c: (gst_ximagesink_xcontext_get),
(gst_ximagesink_xcontext_clear), (gst_ximagesink_change_state):
Fix wrong order or PAR calls. Makes automatically obtained PAR
from the X server atually being used.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_open_audio),
(gst_alsa_sw_params_dump), (gst_alsa_hw_params_dump),
(gst_alsa_close_audio):
disable some of the debugging code for now. Writing debugging to a
buffer is broken in current alsalib releases.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_xrun_recovery):
only restart audio when we indeed have an xrun to fix repeated
xruns. Fix suggested by Giuliano Pochini.
Original commit message from CVS:
* ext/alsa/gstalsaplugin.c: (gst_alsa_error_wrapper): Disable
call to gst_debug_log() if debugging is disabled (bug #145118)
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_xrun_recovery):
use our own functions for restarting the alsa device.
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event):
I should apply patches myself - use MIN for the third argument, not
the second, this fixes seeking
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_start), (gst_alsa_xrun_recovery):
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsasrc.c: (gst_alsa_src_init),
(gst_alsa_src_update_avail), (gst_alsa_src_loop):
Use alsa trigger_tstamp to get the timestamp of the first
sample in the buffer for more precise sync. Some cleanups.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_change_state), (gst_alsa_start),
(gst_alsa_xrun_recovery):
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event),
(gst_alsa_sink_loop), (gst_alsa_sink_get_time):
* ext/alsa/gstalsasrc.c: (gst_alsa_src_init),
(gst_alsa_src_get_time), (gst_alsa_src_update_avail),
(gst_alsa_src_loop):
Add clock to alsasrc. Take new capture timestamp when
restarting after an overrun. Split up some functions between
alsasrc ans alsasink.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_get_time), (gst_alsa_clock_update),
(gst_alsa_change_state), (gst_alsa_update_avail),
(gst_alsa_xrun_recovery):
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsasrc.c: (gst_alsa_src_loop):
Cleanups, take queued samples into account when reporting
the time.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_init), (gst_alsa_dispose),
(gst_alsa_get_time), (gst_alsa_xrun_recovery):
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsaclock.c: (gst_alsa_clock_get_type):
* ext/alsa/gstalsasrc.c: (gst_alsa_src_init), (gst_alsa_src_loop),
(gst_alsa_src_change_state):
* ext/alsa/gstalsasrc.h:
Make the xrun code timestamp and offset the buffers correctly.
moved the clock to the base class, use alsa methods to get time.
Do correct timestamping on outgoing buffers.
Original commit message from CVS:
2004-06-14 Benjamin Otte <otte@gnome.org>
* ext/alsa/gstalsa.c: Use snd_pcm_hw_params_set_rate _near instead of
snd_pcm_hw_params_set_rate since the latter fails for no good
reason on some setups.<
Original commit message from CVS:
* ext/alsa/gstalsa.c: (add_channels):
handle min <= max correctly
* ext/alsa/gstalsa.c: (gst_alsa_fixate_to_mimetype),
(gst_alsa_fixate_field_nearest_int), (gst_alsa_fixate):
add fixation functions so we fixate correctly. No preferring of alaw
anymore because it's the first structure.
* ext/alsa/gstalsa.h:
* ext/alsa/gstalsa.c: (gst_alsa_sw_params_dump),
(gst_alsa_hw_params_dump):
add functions to ease debugging in alsalib
* ext/alsa/gstalsa.c: (gst_alsa_probe_hw_params),
(gst_alsa_set_hw_params), (gst_alsa_set_sw_params),
(gst_alsa_start_audio):
only specify hw params if we really setup a format (fixes#134007 -
or at least works around it)
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_samples_to_timestamp):
cast to GstClockTime to get higher granularity
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event):
use gst_element_set_time_delay to get the exact time
* ext/mad/gstmad.c: (gst_mad_chain):
use the negotiated rate instead of the current frame's rate which
might be wrong because of bit errors. This avoids emitting totally
bogus timestamps and screwing sync.
(fixes#143454)
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_probe_hw_params),
(gst_alsa_set_hw_params), (gst_alsa_set_sw_params),
(gst_alsa_start_audio):
- don't call set_periods_integer anymore, it breaks the
configuration randomly
- call snd_pcm_hw_params_set_access directly instead of using masks
- don't fail if the sw_params can't be set, just use the default
params and hope it works. Alsalib has weird issues when you touch
sw_params and does no proper error reporting about what failed.
* ext/alsa/gstalsa.c: (gst_alsa_open_audio),
(gst_alsa_close_audio):
make our alsa debugging go via gst debugging and not conditionally
defined
* ext/alsa/gstalsa.h:
add ALSA_DEBUG_FLUSH macro
* ext/alsa/gstalsaplugin.c: (gst_alsa_error_wrapper),
(plugin_init):
wrap alsa errors to be printed via the gst debugging system and not
spammed to stderr
Original commit message from CVS:
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_build_list):
Select first track as master track. Not sure how else to handle
that...
* ext/ogg/gstoggmux.c: (gst_ogg_mux_next_buffer):
Discard discont events. Should fix#142962.
Original commit message from CVS:
second batch :
remove ',' at end of enums as they could confuse older gcc, foreign compilers (forte) and gtk-doc
(in gst-plugins/ext/ this time)
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsa_sink_loop):
use correct variable when determining amount of data to skip so we
don't skip into the void and segfault
Original commit message from CVS:
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_open),
(gst_alsa_mixer_close), (gst_alsa_mixer_supported),
(gst_alsa_mixer_build_list), (gst_alsa_mixer_free_list),
(gst_alsa_mixer_change_state), (gst_alsa_mixer_list_tracks),
(gst_alsa_mixer_get_volume), (gst_alsa_mixer_set_volume),
(gst_alsa_mixer_set_mute), (gst_alsa_mixer_set_record):
Fix for cases where we fail to attach to a mixer.
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsa_sink_loop):
compute correct expected timestamps after seek (broken since
last commit)
* ext/gdk_pixbuf/pixbufscale.c: (pixbufscale_init):
rename element and debugging category to gdkpixbufscale
Original commit message from CVS:
* ext/alsa/gstalsasink.c: (gst_alsa_sink_loop):
add error checking to snd_pcm_delay and remove duplicate call to
snd_pcm_delay that caused issues (see inline code comments)
* ext/alsa/gstalsasink.c: (gst_alsa_sink_get_time):
make more readable and fix return value when snd_pcm_delay fails
Original commit message from CVS:
* ext/alsa/gstalsasrc.c: (gst_alsa_src_loop):
don't use a fixed buffer size when writing variable length data to
it. Fixes memory corruption and makes alsasrc work
Original commit message from CVS:
* ext/alsa/gstalsa.c: (device_list),
(gst_alsa_class_probe_devices):
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_open):
Fix alsa oddness in mixer after the combination of using mixer
in source/sink elements and using hw:x,y instead of just hw:x.
Original commit message from CVS:
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_build_list):
* ext/alsa/gstalsasink.c: (gst_alsa_sink_get_type),
(gst_alsa_sink_class_init):
* ext/alsa/gstalsasink.h:
* ext/alsa/gstalsasrc.c: (gst_alsa_src_get_type),
(gst_alsa_src_class_init):
* ext/alsa/gstalsasrc.h:
Make alsasink/src a subclass of alsamixer so that mixer stuff
shows up in gst-rec. Needs some finetuning.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_class_probe_devices):
Don't probe for playback device if we're a source element. Fixes
#139658.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_change_state),
(gst_alsa_close_audio):
handle case better where a soundcard can't pause
* ext/ogg/gstoggdemux.c:
don't crash when we get events but don't have pads yet
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_fixate): Don't fixate fields that
aren't in the caps.
* gst/sine/gstsinesrc.c: change rate caps to [1,MAX]
* gst/videocrop/gstvideocrop.c: (plugin_init): Change rank to NONE.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_get_property),
(gst_alsa_open_audio), (gst_alsa_close_audio):
* ext/alsa/gstalsa.c:
Don't open the device if we're a mixer (= padless).
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_class_init),
(gst_alsa_mixer_init), (gst_alsa_mixer_open),
(gst_alsa_mixer_close), (gst_alsa_mixer_change_state):
Open mixer during state change rather than during object
initialization. Also, get a device name. Currently in a somewhat
hackish fashion, but I didn't really find something better.
Original commit message from CVS:
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_free_list):
* ext/alsa/gstalsamixertrack.c: (gst_alsa_mixer_track_class_init),
(gst_alsa_mixer_track_new):
* ext/alsa/gstalsamixertrack.h:
Fix ancient leftovers... MixerTrack is a GObject.
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_class_probe_devices):
* sys/oss/gstosselement.c: (gst_osselement_class_probe_devices):
Don't block during probing...
Original commit message from CVS:
* ext/alsa/gstalsa.c: (gst_alsa_get_type), (gst_alsa_class_init),
(gst_alsa_get_property), (gst_alsa_probe_get_properties),
(gst_alsa_class_probe_devices), (gst_alsa_class_list_devices),
(gst_alsa_probe_probe_property), (gst_alsa_probe_needs_probe),
(gst_alsa_probe_get_values), (gst_alsa_probe_interface_init),
(gst_alsa_open_audio), (gst_alsa_close_audio):
* ext/alsa/gstalsa.h:
Add propertyprobe interface implementation, add some device-name
property, all this so that it looks good in gnome-volume-control.
Original commit message from CVS:
2004-02-14 Benjamin Otte <in7y118@public.uni-hamburg.de>
* ext/alsa/gstalsa.c: (gst_alsa_pcm_wait),
(gst_alsa_xrun_recovery):
* ext/alsa/gstalsa.h:
try xrun recovery when wait failed. Make xrun recovery function
return TRUE/FALSE to indicate success. (might fix#134354)
Original commit message from CVS:
* ext/alsa/Makefile.am: Fix linking against libgstinterfaces.
(bug #133886) Noticed by bugs@leroutier.net (Stephane LOEUILLET)
Original commit message from CVS:
2004-02-05 Benjamin Otte <in7y118@public.uni-hamburg.de>
* ext/alsa/gstalsa.c: (gst_alsa_change_state):
be sure to stop the clock when going to paused
* sys/oss/gstosssink.c: (gst_osssink_change_state):
reset number of transmitted when going to ready.
fixes#132935
2004-02-05 Charles Schmidt <cschmidt2@emich.edu>
reviewed by Benjamin Otte
* ext/mad/gstid3tag.c: (gst_mad_id3_to_tag_list):
extract track count (fixes#133410)
Original commit message from CVS:
2004-01-31 Benjamin Otte <in7y118@public.uni-hamburg.de>
* ext/alsa/gstalsa.c: (gst_alsa_change_state), (gst_alsa_start),
(gst_alsa_drain_audio), (gst_alsa_stop_audio):
really start/stop clock only on PLAYING <=> PAUSED
* ext/alsa/gstalsasink.c: (gst_alsa_sink_loop):
remove \n from debugging lines
* ext/ogg/gstoggdemux.c: (gst_ogg_demux_chain):
make it work when seeking does not
* ext/vorbis/vorbisdec.c: (vorbis_dec_event):
reset on DISCONT
Original commit message from CVS:
2004-01-31 Benjamin Otte <in7y118@public.uni-hamburg.de>
* ext/alsa/gstalsa.c: (gst_alsa_change_state), (gst_alsa_start):
start clock on PAUSED=>PLAYING, not later
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event):
extract correct time for different discont formats
(gst_alsa_sink_get_time):
don't segfault when no format is negotiated yet, just return 0
* ext/ogg/gstoggdemux.c: (gst_ogg_demux_src_event),
(gst_ogg_demux_handle_event), (gst_ogg_demux_push),
(gst_ogg_pad_push):
handle flush and discont events correctly
* ext/vorbis/vorbisdec.c: (vorbis_dec_event), (vorbis_dec_chain):
handle discont events correctly
Original commit message from CVS:
2004-01-28 Benjamin Otte <in7y118@public.uni-hamburg.de>
* ext/alsa/gstalsa.c: (gst_alsa_query_func):
use gst_element_get_time to get correct time
Original commit message from CVS:
2004-01-15 Julien MOUTTE <julien@moutte.net>
* ext/alsa/gstalsamixer.c: (gst_alsa_mixer_interface_init): Setting
mixer interface type to HARDWARE.
* gst-libs/gst/mixer/mixer.c: (gst_mixer_class_init): Adding a default
type to SOFTWARE.
* gst-libs/gst/mixer/mixer.h: Adding mixer interface type and macro.
* gst-libs/gst/mixer/mixertrack.h: Adding mixertrack flag SOFTWARE.
* gst/volume/gstvolume.c: (gst_volume_interface_supported),
(gst_volume_interface_init), (gst_volume_list_tracks),
(gst_volume_set_volume), (gst_volume_get_volume),
(gst_volume_set_mute), (gst_volume_mixer_init),
(gst_volume_dispose), (gst_volume_get_type), (volume_class_init),
(volume_init): Implementing mixer interface.
* gst/volume/gstvolume.h: Adding tracklist for mixer interface.
* sys/oss/gstosselement.c: (gst_osselement_get_type),
(gst_osselement_change_state): Removing some trailing commas in
structures.
* sys/oss/gstossmixer.c: (gst_ossmixer_interface_init): Setting mixer
interface type to HARDWARE.
* sys/v4l/gstv4lcolorbalance.c:
(gst_v4l_color_balance_interface_init): Setting colorbalance interface
type to HARDWARE.
* sys/v4l2/gstv4l2colorbalance.c:
(gst_v4l2_color_balance_interface_init): Setting colorbalance
interface type to HARDWARE.
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_chain): use exactly the
same code than ximagesink for event handling.
Original commit message from CVS:
2004-01-15 Benjamin Otte <in7y118@public.uni-hamburg.de>
* ext/alsa/gstalsasink.c: (gst_alsa_sink_check_event):
Don't update the time of the clock
(gst_alsa_sink_loop):
sync to the clock given to alsasink, not the own clock
* sys/oss/gstosssink.c: (gst_osssink_chain):
sync to the clock
(gst_osssink_change_state):
activate the clock
* sys/ximage/ximagesink.c: (gst_ximagesink_chain):
* sys/xvimage/xvimagesink.c: (gst_xvimagesink_chain):
remove bogus code that made DISCONT events unhandled
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_video_caps):
explicitly case to double in _set_simple. (fixes 2nd warning in bug
#131502)
* gst/asfdemux/gstasfdemux.c: (gst_asf_demux_read_object_header),
(gst_asf_demux_handle_sink_event), (gst_asf_demux_audio_caps),
(gst_asf_demux_add_audio_stream), (gst_asf_demux_video_caps):
convert g_warning because of wrong asf data to GST_WARNINGs (fixes
2nd warning in bug #131502)
