Commit graph

18335 commits

Author SHA1 Message Date
Luis de Bethencourt
632854eba3 opencv: remove always-true check
filter->cvImage has just been used/dereferenced, there would be an error
there if the pointer was NULL. No need to check since it will always be true.
2015-03-05 15:34:32 +00:00
Sebastian Dröge
254337365a decklinkaudiosrc: Calculate the duration more accurately from the capture time and numbers of samples
This should prevent any accumulating rounding errors with the duration.
2015-03-04 16:13:30 +01:00
Sebastian Dröge
912e58c64c decklinkaudiosrc: Fix the timestamp and offset calculations even more 2015-03-04 16:07:10 +01:00
Sebastian Dröge
1f9d37c924 decklinkaudiosrc: Don't subtract the duration from the capture time
We already have the real capture time, not the time when we received
the end of the packet.
2015-03-04 16:04:18 +01:00
Sebastian Dröge
44c913413c Revert "audiomixer: Latency is twice the output buffer duration, not only once"
This reverts commit d387cf67df.

The analysis was wrong: The first 20ms of latency are introduced by the source
already and put into the latency query, making it only necessary to cover the
additional 20ms of audiomixer inside audiomixer.
2015-03-04 13:16:03 +01:00
Vincent Penquerc'h
b9c521c0ec opusdec: fix latency query in FEC case
The max latency parameter is "the maximum time an element
synchronizing to the clock is allowed to wait for receiving all
data for the current running time" (docs/design/part-latency.txt).

https://bugzilla.gnome.org/show_bug.cgi?id=744338
2015-03-04 11:04:29 +00:00
Thiago Santos
14f6fcdbd8 h264parse: reset the parser information when caps changes
This prevents it from going into passthrough after receiving 2
byte-stream caps (different ones) as it would keep the have_pps and
have_sps set to true and would just go into passthrough without
updating its caps.

This patch makes it reset its stream information to restart properly
when new caps are received.

https://bugzilla.gnome.org/show_bug.cgi?id=745409
2015-03-04 08:00:52 -03:00
Thiago Santos
87f8d7890c hlsdemux: set timestamp on discont buffers
Make sure discont buffers have its timestamp set to allow downstream
to resync if needed
2015-03-04 08:00:48 -03:00
Oleksij Rempel
e8a3973b8f camerabin2: check negotiated caps avoid reseting of the pipe
To avoid useless renegotiation of the pipe we can check for
negotiated caps on src_filter and compare it with requested
filter. If the caps intersect, avoid restart.

Signed-off-by: Oleksij Rempel <bug-track@fisher-privat.net>

https://bugzilla.gnome.org/show_bug.cgi?id=672610
2015-03-04 07:56:51 -03:00
Ilya Averyanov
2eac423273 mpegtsmux: Remove duplicate code
The muxer is already allocated in reset(), which is called soon afterwards.

https://bugzilla.gnome.org/show_bug.cgi?id=745506
2015-03-04 11:07:41 +01:00
Song Bing
cdb06c6c99 dvbsuboverlay: Set query ALLOCATION need_pool to FALSE
Set query ALLOCATION need_pool to FALSE as it only need query if can
support video overlay composition meta.

https://bugzilla.gnome.org/show_bug.cgi?id=745495
2015-03-04 11:05:45 +01:00
Matthew Waters
0593480381 applemedia/avsamplesink: utilise a pull based approach of displaying video frames
Using requestMediaDataWhenReadyOnQueue the layer will execute a block
when it would like more frames. Using this we can provide the current
frame and avoid needlessly filling the layer's buffer queue causing
older frames to be displayed when under resource pressure.
2015-03-04 14:48:03 +11:00
Nicolas Dufresne
eff94f929d gloverlay: Fix upside down and miss-aligned JPEG
LibJPEG uses macroblock of 8x8 sample. In this element we use RGB and
Y444, two 24bit formats that are stored in 32bit pixels. This mean we
have 32x32 bytes macroblocks. For this reason, we need to allocate
our buffer slightly larger. We also need to pass the line pointer in
the right order, otherwise the image endup upside-down.

https://bugzilla.gnome.org/show_bug.cgi?id=745109
2015-03-03 15:26:13 -05:00
Sebastian Dröge
d387cf67df audiomixer: Latency is twice the output buffer duration, not only once
Let's assume a source that outputs outputs 20ms buffers, and audiomixer having
a 20ms output buffer duration. However timestamps don't align perfectly, the
source buffers are offsetted by 5ms.

For our ASCII art picture, each letter is 5ms, each pipe is the start of a
20ms buffer. So what happens is the following:

0   20  40  60
OOOOOOOOOOOOOOOO
|   |   |   |

  5   25  45  65
  IIIIIIIIIIIIIIII
  |   |   |   |

This means that the second output buffer (20 to 40ms) only gets its last 5ms
at time 45ms (the timestamp of the next buffer is the time when the buffer
arrives). But if we only have a latency of 20ms, we would wait until 40ms
to generate the output buffer and miss the last 5ms of the input buffer.
2015-03-03 20:06:48 +01:00
Xavier Claessens
128c2a141a gltransformation: normalize translations
https://bugzilla.gnome.org/show_bug.cgi?id=744763

* Lubosz: use maxfloat for transformation range
2015-03-03 14:05:21 -05:00
Xavier Claessens
80f97eaee7 gltransformation: Fix doc typo
https://bugzilla.gnome.org/show_bug.cgi?id=744763
2015-03-03 14:05:21 -05:00
Nicolas Dufresne
34402920d2 glfilter: Get rid of uploader if caps have changed
We need to update the uploader format if that caps have changed.

https://bugzilla.gnome.org/show_bug.cgi?id=745549
2015-03-03 14:05:21 -05:00
Luis de Bethencourt
dc79b8d761 waylandsink: g_mkstemp is safer than mkstep 2015-03-03 16:53:32 +00:00
Luis de Bethencourt
bed7a679b5 Revert "waylandsink: mkstemp requires setting permission mask"
This reverts commit 1890e7355a.

Better to use g_mkstemp that takes care of the mask without affecting the
entire process.
2015-03-03 16:51:49 +00:00
Edward Hervey
4220fe41be gl: Fix context leaks
Introduced by a12ca13750
2015-03-03 17:36:06 +01:00
Luis de Bethencourt
e3418a963a asfmux: remove unnecessary conditional
The two branches of the if conditional are identical, which means in all cases
the same gst_asf_put_guid() will be executed. Do it directly.

CID #1226448
2015-03-03 16:23:43 +00:00
Luis de Bethencourt
1890e7355a waylandsink: mkstemp requires setting permission mask
Using mkstemp without setting the permission mask is potentially harmful.
POSIX specification of mkstemp() does not say anything about file modes, so we
need to make sure its file mode creation mask is set appropriately before
calling it.
2015-03-03 15:51:55 +00:00
Sebastian Dröge
4521524de3 decklink: Reset the clock calibration when unsetting the master clock
Otherwise the old calibration will stick around for the next time we use it,
potentially giving us completely wrong times.
2015-03-02 16:45:45 +01:00
Sebastian Dröge
8e362aab14 decklink{audio,video}src: Add some more debug output 2015-03-02 13:57:24 +01:00
DanielD10
034ed48023 decklink: Incorrect frame rate for interlaced modes
https://bugzilla.gnome.org/show_bug.cgi?id=744386
2015-03-02 11:59:31 +01:00
Julien Isorce
74c294892d gl/cocoa: register only one custom nsapp loop
Otherwise the pipeline stalls when running
more than one glimagesink with gst-launch.

Also only register the custom nsapp loop
when setting up the nsapp from gstgl.
2015-03-02 07:49:26 +00:00
Julien Isorce
4801db552d gl/cocoa: instead of class_init use g_once to setup nsapp 2015-03-02 07:44:52 +00:00
Julien Isorce
8a0a71ff03 gl/cocoa: check for deprecated constants prior to OSX 10.10 2015-03-02 07:44:25 +00:00
Nicolas Dufresne
283aca3b51 glbufferpool: Fix offset for odd height
We also need to recalculate the offset, since otherwise the frame
mapping will be forward two lines in the U and V planes (I420) due
to gst_video_info_align() round up the Y plane to a even number of
lines.

https://bugzilla.gnome.org/show_bug.cgi?id=745054
2015-03-01 09:43:32 -05:00
Nicolas Dufresne
56d4ff8773 gl-test: Port unit tests to new API 2015-03-01 00:08:42 -05:00
Nicolas Dufresne
04377cfc5e glmemory: Support offset when downloading
Make sure we support offset and video alignment when downloading too.
This is currently not used (plane_start is always 0), but it makes
the code correct if we want to use that later.
2015-02-28 15:01:59 -05:00
Nicolas Dufresne
8c0fcef818 glmemory: Provide correct size on upload
Provide the right size to GL when uploading. Using maxsize is wrong
since we offset the data point with the memory offset and video
alignement offset.

https://bugzilla.gnome.org/show_bug.cgi?id=744246
2015-02-28 14:32:40 -05:00
Nicolas Dufresne
e9bec9ec0e glmemory: Provide correct size on download
Provide the right size to GL when downloading. This fixes downloading
from GLMemory that where created for libav.

https://bugzilla.gnome.org/show_bug.cgi?id=744246
2015-02-28 14:32:40 -05:00
Nicolas Dufresne
4db0ef5789 glmemory: Use fallback for partial copy
When the memory is partial copy, the texture size and videoinfo no
longer make sense. As we cannot guess what the application wants, we
safely copy into a sysmem memory.

https://bugzilla.gnome.org/show_bug.cgi?id=744246
2015-02-28 14:32:40 -05:00
Nicolas Dufresne
b8f168cd65 glmemory: Add GstAllocationParams and alignment support
This implements support for GstAllocationParams and memory alignments.
The parameters where simply ignored which could lead to crash on
certain platform when used with libav and no luck.

https://bugzilla.gnome.org/show_bug.cgi?id=744246
2015-02-28 14:32:39 -05:00
Matthew Waters
03b5288f64 glupload: perform egl upload on the gl thread
Fixes EGLImage usage on raspberry pi

https://bugzilla.gnome.org/show_bug.cgi?id=743914
2015-02-28 18:29:52 +11:00
Sebastian Dröge
72b440cc89 decklinkvideosrc: Fix scaling with rate of internal/external clock 2015-02-27 11:08:14 +02:00
Arun Raghavan
2e5d6c3a3e aggregator: Use standard upstream latency querying logic
The same functionality is duplicated in the default latency querying
now.
2015-02-27 01:05:51 +05:30
Arun Raghavan
5f8f18df9b liveadder: Use default upstream latency querying logic
We can rely on the standard upstream latency querying logic and then add
our own latency.
2015-02-27 01:05:51 +05:30
Víctor Manuel Jáquez Leal
75e875b022 glupload: Set freed method implementation to NULL
When trying to render buffers with meta:GLTextureUpload the glimagesink crashes
with a segmentation fault.

This patch workarounds this crash setting to NULL the method implementation
after free.

https://bugzilla.gnome.org/show_bug.cgi?id=745206
2015-02-26 14:39:32 +02:00
Roman Nowicki
29098129be d3dvideosink: release existing D3D swap chain on init
https://bugzilla.gnome.org/show_bug.cgi?id=745159
2015-02-25 16:19:57 +02:00
Nicolas Dufresne
c20c6cfb92 opengl: Clean Makefile.am
+ Split headers from source
+ Remove uneeded AM_CFLAGS, AM_LDFLAGS
+ Always set OBJCFLAGS

Due to the presence of a .m and regardless of the conditional values,
automake will promote the link command to OBJC using OBJCFLAGS. Only
the basic flags (like warnings and optimization) are going to make a
difference though.

This cleanup builds up the makefile with less specific files first
toward more specific file. FLAGS are built with the basic that unused
flags will have empty variable.
2015-02-24 19:01:45 -05:00
Xavier Claessens
e25f4f1a60 glimagesink: cosmetic cleanup
https://bugzilla.gnome.org/show_bug.cgi?id=745105
2015-02-24 15:22:34 -05:00
Tim-Philipp Müller
004e910006 opengl: don't add --tag=CC twice to LIBTOOLFLAGS 2015-02-24 19:52:59 +00:00
Nicolas Dufresne
0feaeb38f9 opengl: Add --tag=CC to LIBTOOLCLFAGS
This is required for static build.
2015-02-24 14:35:37 -05:00
Luis de Bethencourt
b383ae0fbd jpegparse: interlaced doesn't mean progressive scan
Removing interlaced variable since it is meant to mean progressive scan
and that isn't used.
2015-02-24 18:50:28 +00:00
Luis de Bethencourt
e45db8ca1e Revert "tests: check jpegparse for progressive marker"
This reverts commit 1c77d12ce8.

"interlaced" in the caps don't mean the same thing as the SOF2 marker in the
JPEG format. This test passes because of broken behaviour.
2015-02-24 18:38:31 +00:00
Luis de Bethencourt
1c77d12ce8 tests: check jpegparse for progressive marker 2015-02-24 17:42:15 +00:00
Edward Hervey
a12ca13750 glwindow: Deactivate window before changing handle
When setting a new window handle, we need to ensure all implementations
will detect the change.

For that we deactivate the context before setting the window handle, then
reactivate the context

https://bugzilla.gnome.org/show_bug.cgi?id=745090
2015-02-24 17:42:13 +01:00
Edward Hervey
7075b25288 gl/egl: Detect window handle changes
When (re)activating the context, the backing window handle might have changed.
If that happened, destroy the previous surface and create a new one

https://bugzilla.gnome.org/show_bug.cgi?id=745090
2015-02-24 17:42:13 +01:00