Since the commit 94bb76b6b9, splitmuxsink
will split fragments based on queued time and the threshold of that.
So don't need to store the next timecode for split decision.
Not only the requested keyframe time, the queued size should be
a criterion for the split decision of timecode based mode
(same as max-size-time based split case).
This is a concept that only applies when a buffer arrives in the chain
function, and it has already been scheduled as part of a "multi"-lost
timer.
However, "multi"-lost timers are now a thing of the past, making this
whole concept superflous, and this buffer is now simply counted as "late",
having already been pushed out (albeit as a lost-event).
There is a problem with the code today, where a single timer will
be scheduled for a series of lost packets, and then if the first packet
in that series arrives, it will cause a rescheduling of that timer, going
from a "multi"-timer to a single-timer, causing a lot of the packets
in that timer to be unaccounted for, and creating a situation in where
the jitterbuffer will never again push out another packet.
This patch solves the problem by instead of scheduling those lost packets
as another timer, it instead asks to have that lost-event pushed straight
out.
This very much goes with the intent of the code here: These packets are
so desperately late that no cure exists, and we might as well get the
lost-event out of the way and get on with it.
This change has some interesting knock-on effect being presented in
later commits. It completely removes the concept of "already-lost", so
that is why that test has been disabled in this commit, to be
removed later.
This should result in no worse accuracy than the base parse element, and may
result in better accuracy. In particular, the number of bytes processed at any
given point, as accumulated by baseparse, can be only accurate to
(1 / # of frames) bytes per second, and if we try to seek immediately after
pausing the pipeline to a large offset, this small inaccuracy can propagate to
something noticeable.
The use case that prompted this patch is a 45-minute MPEG-1 layer 3 file, which
has a constant bit rate but no seek tables. Trying to seek the pipeline
immediately after pauisng it, without the ACCURATE flag, to a location 41
minutes in, yields a location that is, even with <https://gitlab.freedesktop.org/gstreamer/gstreamer/merge_requests/374>,
still audibly incorrect. This patch yields a much closer position, no longer
audibly incorrect, and likely within a frame of the most correct position.
By the time sink_event is called, the pad's current caps have
already been updated. To address this, implement sink_event_pre_queue,
and check if the pad can be renegotiated there.
Fixes#707
- Refactored the planar transform method to support all video formats
that are stored planar, independent of the used subsampling
- Added support for Y444
gst_buffer_map () results in memcopying when a GstBuffer contains
more than one GstMemory and when AVC (length-prefixed) alignment is used.
This has quite an impact on performance on systems with limited amount of
resources. With this patch the whole GstBuffer will not be mapped at once,
instead each individual GstMemory will be iterated and mapped separately.
When calling gst_rtp_jitter_buffer_reset you pass in a seqnum.
This is considered the starting-point for a new stream.
However, the old behavior would unref this buffer, basically lying to
the thread that is pushing out buffers saying that it can expect
this buffer, when it would never arrive. The resulting effect being no
more buffer pushed out of the jitterbuffer, and it would buffer
incoming data indefinitely.
By instead inserting the buffer in the gap_packets queue, the _reset()
function will take responsibility for using that as the first buffer
of the new stream.
Fixes#703
In order to concatenate fragments, splitmuxsrc offsets
the start of each fragment PTS to 0 to align it with the
previous file. This means that DTS can go negative for
the first fragment, with really bad results.
Add a fixed offset to outgoing timestamp ranges to
avoid that.
In this mode each field is carried using its own buffer.
Allow deinterlace to negotiate caps with the Interlaced feature and
adjust the algorithm fetching lines.
Fix#620
Output frames used to have their interlace mode set to the same one as
the input. This breaks their field and comp heights when deinterlacing
an alternate stream.
Each FLAC metadata block starts with a flag denoting whether it is the
last metadata block. The existing flacparse code moves any existing
VORBISCOMMENT block to immediately follow the STREAMINFO block without
changing any block's last-metadata-block flag. If no VORBISCOMMENT block
exists, it created one with the last-metadata-block flag set to true.
This results in gstflacdec sometimes giving bad headers to libflac when
trying to play perfectly valid FLAC files depending on the file's
metadata ordering. Depending on the contents of the other metadata
blocks, current versions of libflac may or may not return
FLAC__STREAM_DECODER_ERROR_STATUS_BAD_HEADER when given this broken
metadata. This is most noticeable with files that have a large cover art
image attached where VORBISCOMMENT is the very last metadata block with
no PADDING afterwards.
This patch changes that behavior so that:
1. For FLAC files that already have a VORBISCOMMENT block, the metadata
order is preserved.
2. For FLAC files that do not have a VORBISCOMMENT block, the generated
dummy VORBISCOMMENT is placed immediately after STREAMINFO and
inherits the last-metadata-block flag from STREAMINFO.
https://gitlab.freedesktop.org/gstreamer/gst-plugins-good/issues/484
Sometimes the headers contain useless, wrong or zero values for e.g. the
sample size with these formats. There's only a single valid value for
them so let's set these instead.
We do not have a way to know the format modifiers to use with string
functions provided by the system. G_GUINT64_FORMAT and other string
modifiers only work for glib string formatting functions. We cannot
use them for string functions provided by the stdlib. See:
https://developer.gnome.org/glib/stable/glib-Basic-Types.html#glib-Basic-Types.description
```
../gst/rtpmanager/gstrtpjitterbuffer.c: In function 'gst_jitter_buffer_sink_parse_caps':
../gst/rtpmanager/gstrtpjitterbuffer.c:1523:32: error: unknown conversion type character 'l' in format [-Werror=format=]
|| sscanf (mediaclk, "direct=%" G_GUINT64_FORMAT, &clock_offset) != 1)
^~~~~~~~~~
In file included from /home/nirbheek/cerbero/build/dist/windows_x86/include/glib-2.0/glib/gtypes.h:32,
from /home/nirbheek/cerbero/build/dist/windows_x86/include/glib-2.0/glib/galloca.h:32,
from /home/nirbheek/cerbero/build/dist/windows_x86/include/glib-2.0/glib.h:30,
from /home/nirbheek/cerbero/build/dist/windows_x86/include/gstreamer-1.0/gst/gst.h:27,
from /home/nirbheek/cerbero/build/dist/windows_x86/include/gstreamer-1.0/gst/rtp/gstrtpbuffer.h:27,
from ../gst/rtpmanager/gstrtpjitterbuffer.c:108:
/home/nirbheek/cerbero/build/dist/windows_x86/lib/glib-2.0/include/glibconfig.h:69:28: note: format string is defined here
#define G_GUINT64_FORMAT "llu"
^
../gst/rtpmanager/gstrtpjitterbuffer.c:1523:32: error: too many arguments for format [-Werror=format-extra-args]
|| sscanf (mediaclk, "direct=%" G_GUINT64_FORMAT, &clock_offset) != 1)
^~~~~~~~~~
```
See also: https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/379
Previously we saved the buffer_timestamp straight into
mux->cluster_time. Since the cluster time saved into the file does not
have as high precision as GstClockTime depending on the timecodescale
the rounding of relative_timestamp was invalid as mux->cluster_time
which it was calculated relative to was not equal to the cluster time
written to the matroska file.
Example of "mkvinfo -v" of how it looks before and after this change in
an scenario where previously timestamps got out of order because of this
issue.
Notice the timestamp of the SimpleBlock right before and right after the
Cluster now being in order. The consequence of this however is that the
cluster timestamp is not necessarily the same as the timestamp of the
first buffer in the cluster however (in case it's rounded up).
Before
| + SimpleBlock (track number 1, 1 frame(s), timecode 126.922s = 00:02:06.922)
| + Frame with size 432
| + SimpleBlock (track number 2, 1 frame(s), timecode 126.933s = 00:02:06.933)
| + Frame with size 329
| + SimpleBlock (track number 2, 1 frame(s), timecode 126.955s = 00:02:06.955)
| + Frame with size 333
|+ Cluster
| + Cluster timecode: 126.954s
| + Cluster previous size: 97344
| + SimpleBlock (key, track number 1, 1 frame(s), timecode 126.954s = 00:02:06.954)
| + Frame with size 61239
| + SimpleBlock (track number 2, 1 frame(s), timecode 126.975s = 00:02:06.975)
| + Frame with size 338
After
| + SimpleBlock (track number 1, 1 frame(s), timecode 135.456s = 00:02:15.456)
| + Frame with size 2260
| + SimpleBlock (track number 2, 1 frame(s), timecode 135.468s = 00:02:15.468)
| + Frame with size 332
| + SimpleBlock (track number 2, 1 frame(s), timecode 135.490s = 00:02:15.490)
| + Frame with size 335
|+ Cluster
| + Cluster timecode: 135.489s
| + Cluster previous size: 158758
| + SimpleBlock (key, track number 1, 1 frame(s), timecode 135.490s = 00:02:15.490)
| + Frame with size 88070
| + SimpleBlock (track number 2, 1 frame(s), timecode 135.511s = 00:02:15.511)
| + Frame with size 336
Comparing gst_rtspsrc_loop_interleaved and gst_rtspsrc_loop_udp, and investigating on timeout issues, it sounds like a piece of code has been originally copied from udp to the interleaved one. The timeout variable is never used inside the interleaved one. No side effect has been seen in the removed function calls.
The debug message removed is pointless as the timeout used is "src->tcp_timeout" that is fixed.
The presence of the two timeout drove my team in investigating if the reference to the tcp_timeout was correct (it is). Hence we removed the misleading reference to the local timeout variable.
The VP Codec Configuration Box (vpcC) contains vp9 profile and
colorimetry information. Especially the profile information might
be useful for downstream to select capable decoder element.
For live streams, if we keep the stream for a long time, the timestamp
will be larger than max_uint32. In that case, timestamp should be handled
as a rollover timestamp rather than a backward timestamp.
