Original commit message from CVS:
* sys/winks/gstksclock.c (gst_ks_clock_worker_thread_func,
gst_ks_clock_start):
Synchronize KS clock as a single-shot operation for now, there's not
much point in doing it periodically until we're actually using the
KS timestamps for anything else than just discarding old frames.
* sys/winks/gstksvideosrc.c (gst_ks_video_src_open_device):
Provide the GstClock when opening the device if we already have one.
Original commit message from CVS:
* sys/winks/gstksvideodevice.c (GST_DEBUG_IS_ENABLED, last_timestamp,
gst_ks_video_device_prepare_buffers, gst_ks_video_device_create_pin,
gst_ks_video_device_set_state, gst_ks_video_device_request_frame,
gst_ks_video_device_read_frame):
Guard against capturing old frames by keeping track of the last
timestamp and also zero-fill the buffers before each capture.
Only assign a master clock if the pin hasn't already got one.
Actually free buffers on the way down to avoid a huge memory leak,
as this was previously done when changing state to ACQUIRE downwards
and we now skip that state on the way down.
Add some debug.
* sys/winks/gstksvideosrc.c (DEFAULT_DEVICE_PATH, DEFAULT_DEVICE_NAME,
DEFAULT_DEVICE_INDEX, KS_WORKER_LOCK, KS_WORKER_UNLOCK,
KS_WORKER_WAIT, KS_WORKER_NOTIFY, KS_WORKER_WAIT_FOR_RESULT,
KS_WORKER_NOTIFY_RESULT, KS_WORKER_STATE_STARTING,
KS_WORKER_STATE_READY, KS_WORKER_STATE_STOPPING,
KS_WORKER_STATE_ERROR, KsWorkerState, device_path, device_name,
device_index, running, worker_thread, worker_lock,
worker_notify_cond, worker_result_cond, worker_state,
worker_pending_caps, worker_setcaps_result, worker_pending_run,
worker_run_result, gst_ks_video_src_reset,
gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_open_device,
gst_ks_video_src_close_device, gst_ks_video_src_worker_func,
gst_ks_video_src_start_worker, gst_ks_video_src_stop_worker,
gst_ks_video_src_change_state, gst_ks_video_src_set_clock,
gst_ks_video_src_set_caps, gst_ks_video_src_timestamp_buffer,
gst_ks_video_src_create):
Remove ENABLE_CLOCK_DEBUG define, it's GST_LEVEL_DEBUG after all.
Get rid of PROP_ENSLAVE_KSCLOCK and always slave the ks clock to the
GStreamer clock, it doesn't seem to hurt and matches DirectShow's
behavior. As an added bonus we usually get PresentationTime set for
each frame, so we can expand on this later for smarter latency
reporting (by looking at the diff between the timestamp from the
driver and the time according to the GStreamer clock).
Use an internal worker thread for opening the device, setting caps,
changing its state and closing it. This way we're a lot more
compatible with drivers that rely on hacks to do video-effects
between the low-level NT API and the application. Ick.
Start the ks clock and set the pin to KSSTATE_RUN on the first
create() so that we'll hopefully get hold of the GStreamer clock
from the very beginning. This way there's no chance that the
timestamps will make a sudden jump in the beginning of the stream
when we're running with a clock.
* sys/winks/kshelpers.c (CHECK_OPTIONS_FLAG,
ks_options_flags_to_string):
Reorder the flags to match the headerfile order, and make the string
a bit more compact.
* sys/winks/ksvideohelpers.c (ks_video_probe_filter_for_caps):
Avoid leaking KSPROPERTY_PIN_DATARANGES.
Original commit message from CVS:
* gst/aiffparse/aiffparse.c:
Support chunks in AIFF in any order in pull mode, and any order so
long as we get COMM before the actual data (SSND) in push mode.
Fixes playback of AIFC files.
Original commit message from CVS:
* gst/selector/gstinputselector.c: (gst_selector_pad_reset),
(gst_input_selector_reset), (gst_input_selector_change_state):
Reset the selector state when going to READY.
Original commit message from CVS:
* gst/rtpmanager/gstrtpbin.c: (on_sender_timeout),
(create_session), (gst_rtp_bin_associate),
(gst_rtp_bin_sync_chain), (gst_rtp_bin_class_init),
(gst_rtp_bin_request_new_pad):
* gst/rtpmanager/gstrtpbin.h:
Add signal to notify listeners when a sender becomes a receiver.
Tweak lip-sync code, don't store our own copy of the ts-offset of the
jitterbuffer, don't adjust sync if the change is less than 4msec.
Get the RTP timestamp <-> GStreamer timestamp relation directly from
the jitterbuffer instead of our inaccurate version from the source.
* gst/rtpmanager/gstrtpjitterbuffer.c:
(gst_rtp_jitter_buffer_chain), (gst_rtp_jitter_buffer_loop),
(gst_rtp_jitter_buffer_get_sync):
* gst/rtpmanager/gstrtpjitterbuffer.h:
Add G_LIKELY macros, use global defines for max packet reorder and
dropouts.
Reset the jitterbuffer clock skew detection when packets seqnums are
changed unexpectedly.
* gst/rtpmanager/gstrtpsession.c: (on_sender_timeout),
(gst_rtp_session_class_init), (gst_rtp_session_init):
* gst/rtpmanager/gstrtpsession.h:
Add sender timeout signal.
* gst/rtpmanager/rtpjitterbuffer.c: (rtp_jitter_buffer_reset_skew),
(calculate_skew), (rtp_jitter_buffer_insert),
(rtp_jitter_buffer_get_sync):
* gst/rtpmanager/rtpjitterbuffer.h:
Add some G_LIKELY macros.
Keep track of the extended RTP timestamp so that we can report the RTP
timestamp <-> GStreamer timestamp relation for lip-sync.
Remove server timestamp gap detection code, the server can sometimes
make a huge gap in timestamps (talk spurts,...) see #549774.
Detect timetamp weirdness instead by observing the sender/receiver
timestamp relation and resync if it changes more than 1 second.
Add method to report about the current rtp <-> gst timestamp relation
which is needed for lip-sync.
* gst/rtpmanager/rtpsession.c: (rtp_session_class_init),
(on_sender_timeout), (check_collision), (rtp_session_process_sr),
(session_cleanup):
* gst/rtpmanager/rtpsession.h:
Add sender timeout signal.
Remove inaccurate rtp <-> gst timestamp relation code, the
jitterbuffer can now do an accurate reporting about this.
* gst/rtpmanager/rtpsource.c: (rtp_source_init),
(rtp_source_update_caps), (calculate_jitter),
(rtp_source_process_rtp):
* gst/rtpmanager/rtpsource.h:
Remove inaccurate rtp <-> gst timestamp relation code.
* gst/rtpmanager/rtpstats.h:
Define global max-reorder and max-dropout constants for use in various
subsystems.
Original commit message from CVS:
* gst/mpegdemux/gstmpegdemux.c: (gst_flups_demux_parse_pack_start):
* gst/mpegdemux/gstmpegtsdemux.c: (gst_fluts_demux_data_cb):
Fix build on macosx.
Original commit message from CVS:
* ext/resindvd/plugin.c: (plugin_init):
* ext/resindvd/resindvdsrc.c:
* ext/twolame/gsttwolame.c: (plugin_init):
* gst/aiffparse/aiffparse.c: (plugin_init):
Enable/fix up translations for these plugins.
* po/LINGUAS:
Add 'ca' to LINGUAS.
* po/POTFILES.in:
* po/POTFILES.skip:
Add more files for translation and more files which tools
should skip.
Original commit message from CVS:
* gst/mpegtsmux/mpegtsmux_aac.c: (mpegtsmux_prepare_aac):
Allocate a fixed size buffer on the stack instead of using malloc().
* gst/mpegtsmux/tsmux/tsmux.c: (tsmux_new), (tsmux_free),
(tsmux_program_new), (tsmux_program_free):
* gst/mpegtsmux/tsmux/tsmuxstream.c: (tsmux_stream_new),
(tsmux_stream_free), (tsmux_stream_consume),
(tsmux_stream_add_data):
Use GSlice.
Original commit message from CVS:
* tests/check/elements/audioresample.c: (setup_audioresample),
(fail_unless_perfect_stream), (test_perfect_stream_instance),
(test_discont_stream_instance):
Now that GstBaseTransform is 'fixed' ... remove cruft from tests.
Add debugging for coherence.
Original commit message from CVS:
* gst/selector/gstinputselector.c: (gst_input_selector_init),
(gst_input_selector_event), (gst_input_selector_query):
Reuse the get_linked_pads for both source and sinkpads because they are
the same.
Implement a custum event handler and get the internally linked pad
directly instead of relying on the default (slower) implementation.
Original commit message from CVS:
* ext/celt/gstceltdec.c: (celt_dec_chain_parse_data):
Correctly take the granulepos from upstream if possible and
correctly handle the granulepos in various calculations: the
granulepos is the sample number of the _last_ sample in a frame, not
the first.
* ext/celt/gstceltenc.c: (gst_celt_enc_sinkevent),
(gst_celt_enc_encode), (gst_celt_enc_chain),
(gst_celt_enc_change_state):
* ext/celt/gstceltenc.h:
Handle non-zero start timestamps in the encoder and detect/handle
stream discontinuities. Fixes bug #547075.
Original commit message from CVS:
* ext/faac/gstfaac.c: (gst_faac_init), (gst_faac_sink_event),
(gst_faac_chain), (gst_faac_change_state):
* ext/faac/gstfaac.h:
Add code for calculating proper timestamp/duration for the trailing
encoded buffers that faac will output when receiving EOS.
Original commit message from CVS:
* sys/winks/ksvideohelpers.c (ks_video_media_type_free):
Avoid leaking the KSDATARANGE member of each KsVideoMediaType.
Original commit message from CVS:
* gst/dccp/gstdccp.c:
* gst/dccp/gstdccpclientsrc.c:
Fix compilation on Solaris by including filio.h as needed.
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll.inc:
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll2.inc:
Fix compilation with Forte - apparently it hates concatenating a
macro argument that starts with an underscore??
Original commit message from CVS:
* gst/rtpmanager/gstrtpsession.c: (gst_rtp_session_send_rtcp),
(gst_rtp_session_event_send_rtp_sink):
Send EOS when the session object instructs us to.
* gst/rtpmanager/rtpsession.c: (rtp_session_on_timeout):
* gst/rtpmanager/rtpsession.h:
Make it possible for the session manager to instruct us to send EOS. We
currently will EOS when the session is a sender and when the sender part
goes EOS. This is not entirely correct behaviour because the session
could still participate as a receiver.
Fixes#549409.
Original commit message from CVS:
* gst/aiffparse/aiffparse.c:
Read size of chunks preceeding the audio data with the
correct endianness. Fixes playback of some files.
Fixes#538500
Original commit message from CVS:
* configure.ac:
* gst/aiffparse/Makefile.am:
* gst/aiffparse/aiffparse.c:
* gst/aiffparse/aiffparse.h:
Add an AIFF parsing element, heavily based on wavparse.
Original commit message from CVS:
* sys/winks/gstksvideodevice.c (gst_ks_video_device_class_init,
gst_ks_video_device_set_state):
Don't set the pin state to KSSTATE_RUN from the streaming thread.
Skip KSSTATE_ACQUIRE when changing pin state downwards.
Be nice and specify G_PARAM_STATIC_STRINGS.
Remove unused finalize method.
* sys/winks/gstksvideosrc.c (DEFAULT_ENABLE_QUIRKS, PROP_ENABLE_QUIRKS,
enable_quirks, gst_ks_video_src_class_init, gst_ks_video_src_init,
gst_ks_video_src_finalize, gst_ks_video_src_get_property,
gst_ks_video_src_set_property, gst_ks_video_src_reset,
gst_ks_video_src_apply_driver_quirks, gst_ks_video_src_change_state,
gst_ks_video_src_set_caps):
First driver quirk: work around Logitech's hostile driver software to
improve stability and performance. See comments for details.
Provide a property to disable driver quirks (enabled by default).
Be nice and specify G_PARAM_STATIC_STRINGS.
Remove unused dispose method.
Tweak include order.
Original commit message from CVS:
* gst/selector/gstinputselector.c: (gst_input_selector_init),
(gst_input_selector_query):
Implement the LATENCY query in a better way by taking the latency of all
sinkpads and taking the min/max instead of just taking a random pad.
Original commit message from CVS:
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopBottom.inc:
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopTop.inc:
* gst/deinterlace2/tvtime/tomsmocomp/StrangeBob.inc:
* gst/deinterlace2/tvtime/tomsmocomp/WierdBob.inc:
Unroll the loop to handle two bytes at once. This should give
a small speedup and makes it possible to handle chroma and luma
different which is needed later.
Original commit message from CVS:
* gst/dccp/gstdccpserversink.c:
* gst/dccp/gstdccpserversink.h:
Don't put globals only used by one '.c' file in a header !
Declare it as static, fixes build on macosx.
Original commit message from CVS:
* gst/dccp/gstdccp.c: (gst_dccp_read_buffer),
(gst_dccp_send_buffer), (gst_dccp_set_sock_windowsize):
size_t's size varies by platform/architecture. Use glib convenience
macro instead. Fixes build on macosx.
Remove ending '\n' in debug statements.
Original commit message from CVS:
* gst/deinterlace2/gstdeinterlace2.c:
(gst_deinterlace_method_class_init):
* gst/deinterlace2/gstdeinterlace2.h:
* gst/deinterlace2/tvtime/tomsmocomp.c:
(gst_deinterlace_method_tomsmocomp_class_init):
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopBottom.inc:
* gst/deinterlace2/tvtime/tomsmocomp/SearchLoopTop.inc:
* gst/deinterlace2/tvtime/tomsmocomp/StrangeBob.inc:
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll.inc:
* gst/deinterlace2/tvtime/tomsmocomp/TomsMoCompAll2.inc:
* gst/deinterlace2/tvtime/tomsmocomp/WierdBob.inc:
* gst/deinterlace2/tvtime/tomsmocomp/tomsmocompmacros.h:
First part of the C implementation of the tomsmocomp deinterlacing
algorithm. This only supports search-effort=0 currently, is painfully
slow and needs some cleanup later when all search-effort settings
are implemented in C.
Original commit message from CVS:
* configure.ac:
* sys/Makefile.am:
* sys/winks/Makefile.am:
* sys/winks/gstksclock.c:
* sys/winks/gstksclock.h:
* sys/winks/gstksvideodevice.c:
* sys/winks/gstksvideodevice.h:
* sys/winks/gstksvideosrc.c:
* sys/winks/gstksvideosrc.h:
* sys/winks/kshelpers.c:
* sys/winks/kshelpers.h:
* sys/winks/ksvideohelpers.c:
* sys/winks/ksvideohelpers.h:
New plugin for low-latency video capture on Windows (#519935).
Uses Kernel Streaming, the lowest level API for doing video capture
on Windows (more or less just raw ioctls).
Original commit message from CVS:
* gst/pcapparse/gstpcapparse.c:
* sys/winscreencap/gstdx9screencapsrc.c:
* sys/winscreencap/gstgdiscreencapsrc.c:
Added documentation blobs. Thanks to Stefan for noticing!
Original commit message from CVS:
* sys/dshowdecwrapper/gstdshowaudiodec.c:
Flip mpeg1/mpeg2 arrays for mpeg audio. Detect which type the audio
is correctly, instead of backwards. No functional changes, since this
mistake was completely self-consistent.
Original commit message from CVS:
* docs/plugins/gst-plugins-bad-plugins-docs.sgml:
Add, but commented out xml/element-dc1394.xml. Its documented, but
I can't get it to be build.
* ext/celt/gstceltdec.c:
* ext/celt/gstceltenc.c:
Fix doc warnings and reformat the doc block.
