The surface created for downstream is going to be filled by VAAPI
elements. So, the driver needs write access on that surface.
This patch releases the derived image held by the proxy, thus the
surface is unmarked as busy.
This is how it has to be done as discussed on libva mailing list.
https://bugzilla.gnome.org/show_bug.cgi?id=755072
Add GstPadDirection param to gst_vaapi_dmabuf_allocator_new(), thus
we later could do different thing when the allocated memory is for
upstream or dowstream, as required by VA-API.
https://bugzilla.gnome.org/show_bug.cgi?id=755072
A value of width/height property should be set to out caps,
if negotiation had been going properly.
So we can use srcpad_info when making decision of scaling.
https://bugzilla.gnome.org/show_bug.cgi?id=778010
If a GstVaapiDisplay is not found in the GStreamer context sharing,
then VAAPI elements look for a local GstGLContext in gst context
sharing mechanism ('gst.gl.local.context').
If this GstGLContext not found either then, only the VAAPI decoders
and the VAAPI post-processor, will try to instantiate a new
GstGLContext.
If a valid GstGLContext is received, then a new GstVaapiDisplay will
be instantiated with the platform, API and windowing specified by the
instantiated GstGLContext.
Original-Patch-By: Matt Fischer <matt.fischer@garmin.com>
https://bugzilla.gnome.org/show_bug.cgi?id=777409
Instead of calling g_return_val_if_fail() to check the context type, we
should use a normal conditional, since it is possible that other context types
can arrive and try to be assigned. Otherwise a critical log message is
printed.
This happens when we use playbin3 with vaapipostproc as video-filter.
https://bugzilla.gnome.org/show_bug.cgi?id=777409
Every time a new buffer is allocated, the pool is activated. This
doesn't impact in performance since gst_buffer_pool_set_active()
checks the current state of the pool. Nonetheless it logs out a
message if the state is the same, and it floods the logging subsystem
if it is enabled.
To avoid this log flooding first the pool state is checked before
changing it.
When a new sink caps arrive the internal decoder state is updated
and, if it is, request a downstream renegotiation.
Previously, when new caps arrived the whole decoder where destroyed
and recreated. Now, if the caps are compatible or has the same codec,
the internal decoder is kept, but a downstream renegotiation is
requested.
https://bugzilla.gnome.org/show_bug.cgi?id=776979
Adds two buffers as the default value of minimum buffer.
This would be used when creating and proposing vaapi bufferpool for
sink pad, hence the upstream element will keep, at least, these two
buffers.
https://bugzilla.gnome.org/show_bug.cgi?id=775203
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Rename the parameters 'vip' and 'flags' to 'alloc_info' and
'surface_alloc_flags' respectively. The purpose of this change is
to auto-document those parameters.
Also, aligned to this patch, the local 'alloc_info' variable was
renamed as 'surface_info', because it stores the possible surface's
video info, not the allocate one.
In order to auto-document the code, this patch renames the 'vip'
parameter in the functions related to gst_vaapi_video_allocator_new ()
to 'alloc_info', since it declares the allocation video info from
the vaapi buffer pool.
gst_vaapi_surface_new_with_format() is a wrapper for
gst_vaapi_surface_new_full (). In this case, the former is simpler
than the first. This patch changes that.
If src pad caps have changed, it needs to notify it downstream. In
addition, do not set passthrough if they have changed.
Otherwise, transform sometimes starts processing before caps change.
The passthrough value will be set in fixate later in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=775204
Add a capsfilter forcing the caps
"video/x-raw(memory:VASurface), format=(string)NV12" between the
queue and the vaapipostproc so no renegotiation is required.
https://bugzilla.gnome.org/show_bug.cgi?id=776175
To detect and handle errors during allocator_configure_surface_info()
and allocator_conigure_image_info().
https://bugzilla.gnome.org/show_bug.cgi?id=776084
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
When an instance of GstVaapiVideoAllocator fails at initializing, the
log message should not include the allocator's object, because it is
going to be unrefed.
This reverts commit 3285121181.
videodecode's negotiate() vmethod is also called when events arrive,
but this would mean that the proper configuration of sink pad might
not be complete, thus we should not update the src pad.
Let's keep the old non-vmethod negotitate().
Added the inlined function allocator_configure_pools() moving out code
from gst_vaapi_video_allocator_new() to make clear that it is a
post-initalization of the object.
Since video_info stores the GstVideoInfo of the allocation caps,
it is clear if we rename it as allocation_info, to distinguish it
later from negotiation_info.
Instead of defining GstVaapiDmaBufAllocator as a hackish decorator of
GstDmaBufAllocator, now, since the expose of the GstDmaBufAllocator's
GType, GstVaapiDmaBufAllocator is a full feature GstAllocator inherited
from GstDmaBufAllocator.
https://bugzilla.gnome.org/show_bug.cgi?id=755072
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Add a helper function to initialize the gst_debug_vaapivideomemory,
to use it either by the GstVaapiVideoAllocatorClass or
GstVaapiDmabufAllocator (which is a decorator of GstDmaBufAllocator).
Later, log possible errors when calling gst_vaapi_dmabuf_allocator_new ()
https://bugzilla.gnome.org/show_bug.cgi?id=755072
As the internal encoder is created at start(), let's release it at
stop() vmethod, to be consistent.
gst_vaapiencode_destroy() is called since it also resets the input and
output states, which is something that the base class does internally
after calling stop() vmethod.
https://bugzilla.gnome.org/show_bug.cgi?id=769266
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Currently, specific encoder is created during set_format(). This might
lead to race condition when creating profiles with multiple encoders.
This patch moves ensure_encoder() call to start() vmethod to ensure
avoiding the race condition.
https://bugzilla.gnome.org/show_bug.cgi?id=773546
In commit ca0c3fd6 we remove the dynamic configuration if the bin
because we assumed that the bin will be always static as it is
registered.
Nonetheless we were wrong, because it is possible to request, with a
property, to avoid the use of the post-processor.
Since we want to add a way to disable the post-processor through
environment variables, this remove feature is required again.
If the environment variable GST_VAAPI_DISABLE_VPP is defined the
postprocessor inside of the vaapidecodebin is disabled, then
vaapidecodebin is an alias of the old vaapidecode.
https://bugzilla.gnome.org/show_bug.cgi?id=775041
Instead of creating the VA display before setting the bus to the
element, it is created when the element is opened.
Basically, this commit is a revert of
5e5d62cac7
That was done when the GStreamer's context sharing was not mature
enough as now. There is no reason to keep this hack.
Since the differentiation of negotiation caps and allocation caps,
there is no need to add a video crop meta with the negotiation caps.
Hence, removing it.
https://bugzilla.gnome.org/show_bug.cgi?id=773948
Since all the video converter were deprecated in gstreamer-1.2, we don't need
to handle them anymore in the vaapi's buffer meta.
This patch removes its usage and the buffer meta's API for that.
https://bugzilla.gnome.org/show_bug.cgi?id=745728
First, deactivate source pad pool when the out caps change, and if so,
destroy texture map, the source pad allocator and pool only if the
new caps are different from the ones already set.
This is related with bug 758907 when no vaapipostproc is used (no
vaapidecodebin). In order to negotiate downstream we need to destroy
the source pad allocator, otherwise the same allocated buffers are
used, failing the mapping.
Remove redundant GST_VAAPI_TYPE_VIDEO_INFO, since it is a duplicate of
GST_TYPE_VIDEO_INFO created before gstreamer 1.6, where the boxed type
was created.
https://bugzilla.gnome.org/show_bug.cgi?id=774782
This patch adds the created allocator to the allocation query either
in decide_allocation() and propose_allocation() vmehtods.
With it, there's no need to set the modified allocator's size in the
pool configuration.
https://bugzilla.gnome.org/show_bug.cgi?id=774782
We should set the correct buffer size when we are configuring the pool,
otherwise the buffer will be discarded when it returns to the pool.
Indeed when the ref-count of a buffer reaches zero, its pool will queue
it back (and ref it) if, and only if, the buffer size matches the
configured buffer size on the pool.
This issue can be debugged with GST_DEBUG=*PERF*:6, see gstbufferpool.c
https://bugzilla.gnome.org/show_bug.cgi?id=774782
When calling gst_vaapi_video_memory_copy() the allocator of the memory
to copy should be allocated by the vaapi allocator.
This patch does this verification.
Instead of having a gst_vaapi_video_memory_free() that is only going to
be called by gst_vaapi_video_allocator_free(), let's just remove the first
and merged into the second.
There were duplicated code in gst_video_meta_unmap_vaapi_memory() and
gst_vaapi_video_memory_unmap() when unmapping.
This patch refactors both methods adding the common function
unmap_vaapi_memory(). This also ensures, if direct rendering is enabled, it
is correctly reset.
Additionally, only when mapping flag has the WRITE bit, it set the image as
current, which was done in gst_video_meta_map_vaapi_memory() but no in
gst_vaapi_video_memory_map().
In order to make this, the mapping flags were required, so instead of
overloading mem_unmap() virtual function, mem_unmap_full() is overloaded.
https://bugzilla.gnome.org/show_bug.cgi?id=774213
There were duplicated code in gst_video_meta_map_vaapi_memory() and
gst_vaapi_video_memory_map() when doing the READ and WRITE mapping.
This patch refactors both methods adding the common function
map_vaapi_memory().
Additionally, only when flag has the READ bit it calls
ensure_images_is_current(), which was done in
gst_video_meta_map_vaapi_memory() but no in
gst_vaapi_video_memory_map().
https://bugzilla.gnome.org/show_bug.cgi?id=772151
The variable member allowed_sinkpad_caps is constructed querying the
current VA display. Bearing that in mind, the variable shall be freed
when the VA display changes or is removed.
This patch moves the freeing of allowed_sinkpad_caps to close(), when
the VA display is freed.
The thread that handles window's events should be finished during
pipeline's shutdown, otherwise it will remain alive during pipeline
re-activation, leading to unexpected problems.
This patch fixes failures of intensive_state_change scenario of
gst-validate
https://bugzilla.gnome.org/show_bug.cgi?id=774241
Returning GST_FLOW_ERROR always when gst_pad_push fails might lead to
deadlock during seek.
This patch returns the same error of gst_pad_push() and log out the
return value.
https://bugzilla.gnome.org/show_bug.cgi?id=774030
In commit 6d11a00 were introduced a regression when gstreamer-vaapi is
compiled with out EGL/GLX support: it shall not support
GST_VAAPI_MAKE_GLTEXUPLOAD_CAPS.
This patch guards the inclusion of GST_VAAPI_MAKE_GLTEXUPLOAD_CAPS in the
allowed src caps for vaapedecode if EGL/GLX.
Previously the frame map counter increased independently if the map succeeded
or not. This leaded to critical messages and crashes if the frame was unable
to be mapped, but the counter increased.
This patch increases the map counter only if the map operation occurred.
https://bugzilla.gnome.org/show_bug.cgi?id=773939
When the allocator is created, it stores the allocation caps. But sometimes
the "allocation caps" may be different from the "negotiation caps".
In this case, the allocator should store the negotiation caps since they
are the ones used for frame mapping with GstVideoMeta.
When vaapispostproc is used, this is not a problem since the element is assume
to resize. But when using a vaapi decoder only, with a software renderer, it
fails in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=773323
Just as vaapipostproc, VA decoder's context can be queried to get the possible
raw formats, so, the src caps can negotiate the exact caps that the context
supports.
Since when the sink pad allocator is created, it is decided if the required
one is vaapi allocator or dmabuf allocator, there is no need to force its set
again.
When running gst-discoverer-1.0, in certain media, vaapipostroc is stopped
meanwhile it is transforming caps. The problem is that stop() calls
gst_vaapi_plugin_base_close(), which nullifies the element's va display, but
the va display is used in tranform_caps() when it is extracting the possible
format conversions. This display disappearing generates warning messages.
This patch holds a local reference of va display at ensure_allowed_raw_caps()
hence it doesn't go away meanwhile it is used, even if the
gst_vaapi_plugin_base_close() is called in other thread.
https://bugzilla.gnome.org/show_bug.cgi?id=773593
Enable the direct rendering with linear surfaces if the negotiated src caps
are video/x-raw without features.
Pass also the caps, since they are needed to know the requested caps features.
Just as we did in ensure_sinkpad_allocator(), let's move the error message
into the ensure_srcpad_allocator() from the caller,
gst_vaapi_plugin_base_decide_allocation()
Instead of receiving the GstVideoInfo structure as parameter, get the original
GstCaps from ensure_sinkpad_buffer_pool(), in this way we could decide better
which allocator instantiate.
If the allocator was configured to use direct upload or rendering, the
generated derived image created at mapping needs to be destroyed after
unmapping, because, in order to process the surface, it should not be marked
as "busy" by the driver.
The way to experiment with the direct rendering is through and internal
compiler pre-processor flag.
The current change set enables a way to specified at run-time, as a flag
passed to the allocator at instanciation time.
This patch is to change the inheritance of GstVaapiDisplay to GstObject,
instead of GstVaapiMiniObject. In this way we can use all the available
infrastructure for GObject/GstObject such as GstTracer, GIR, etc.
In addition, a new debug category for GstVaapiDisplay is created to make it
easier to trace debug messages. It is named "vaapidisplay" and it transverse
all the VA display backends (DRM, GLX, EGL, Wayland, ...)
This patch is a step forward to expose GstVaapiDisplay for users in a future
library.
https://bugzilla.gnome.org/show_bug.cgi?id=768266
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Since vaapipostproc is only registered if the driver supports it, all the
support for dynamic loading were removed. Though some leftovers remained.
https://bugzilla.gnome.org/show_bug.cgi?id=773589
In the spirit of the codec split, this patch removes the documentation of
vaapidecode and adds a page per each possible decoder.
Nonetheless, only those available in the compilation system are going to be
instrospected, because the rest are not registered.
vaapidecode has a member named allowed_caps, but this name is not enough
explicit. This patch renames allowed_caps to allowed_sinkpad_caps.
No functional changes were included.
https://bugzilla.gnome.org/show_bug.cgi?id=773497
In order to clarify the use of flag as input parameter, it is renamed to
surface_alloc_flag, since it is used when creating a VA surface with certain
properties.
https://bugzilla.gnome.org/show_bug.cgi?id=773497
When caps reconfiguration is called, the new downstream frame size might be
different. Thus, if the downstream caps change,the display's texture map is
reset.
In addition, during pipeline shutdown, textures in texture map have to be
released, since each one have a reference to the GstVaapiDisplay object, which
is a dangerous circular reference.
https://bugzilla.gnome.org/show_bug.cgi?id=769293
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
instances when created and reuse
This patch improves performance when glimagesink uploads a GL texture.
It caches the GStVaapiTexture instances in GstVaapiDisplay{GLX,EGL}, using an
instance of GstVaapiTextureMap, so our internal texture structure can be found
by matching the GL texture id for each frame upload process, avoiding the
internal texture structure creation and its following destruction.
https://bugzilla.gnome.org/show_bug.cgi?id=769293
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
set_format() is called by upstream when the stream capabilites has changed.
Before, if the new stream is compatible with the old one the VA decoder was
not destroyed. Nonetheless, with this behavoir, the VA decoder ignores
when the upstreamer parsers gets more details of the stream, such as the
framerate. Hence, when the src caps are negotiates, the further sink caps
updates are ignored.
This patch forces the VA decoder destroying and recreation when set_format()
is called.
https://bugzilla.gnome.org/show_bug.cgi?id=770921
When calling gst_video_frame_map() with GST_MAP_WRITE flag, it doesn't call
ensure_image_is_current(), which means it doesn't guarentee VAImage is valid
in this case.
https://bugzilla.gnome.org/show_bug.cgi?id=766978
In a multiple video cards system, a X11 environment may have different VA
capabilities. This patch tracks the DISPLAY environment variable to
invalidates the GStreamer features cache. Also tracks WAYLAND_DISPLAY.
https://bugzilla.gnome.org/show_bug.cgi?id=770357
Encoders claim to support a whole bunch of input formats but then
just error out if the format is not actually supported, even if
there's a converter in front. This means they're not fit for
autoplugging in encodebin or camerabin yet and therefore should
not have a rank. People can still use them in custom pipelines.
https://bugzilla.gnome.org/show_bug.cgi?id=769266
Check earlier if upstream video source has activated the dmabuf-import
io-mode (hack to disappear soon), thus we can avoid the re-assignation of a
new allocator.
Add the method gst_allocator_get_vaapi_image_size() for the
GstVaapiVideoAllocator, which gets the size of the allocated images with the
current video info.
This method replaces the direct call to the allocator's image info when the
pool is configured.
Depends on media, video size is sometimes updated with new allocator.
It leads to dismatch between bufferpool's set size and real allocated buffer size.
In this case, it causes every buffer is freed during release in bufferpool,
which should be reused. This affects performance.
https://bugzilla.gnome.org/show_bug.cgi?id=769248
In order to register only the available decoders, this patch queries the
created test VA display, which uses the currently used back-end (X11, Wayland,
DRM, …) on the used display device.
https://bugzilla.gnome.org/show_bug.cgi?id=724352
In order to register only the available encoders, this patch queries the
created test VA display, which uses the currently used back-end (X11,
Wayland, DRM, …) on the used display device.
https://bugzilla.gnome.org/show_bug.cgi?id=724352
Split the vaapidecode to all the supported codecs with the format
vaapi{codec}dec.
vaapidecode is stil registered as a GObject type, but not as a
GStreamer feature, so it can be used internally by vaapidecodebin without
changing its code too much.
https://bugzilla.gnome.org/show_bug.cgi?id=734093
Since the elements dependant of the VA video processor are now only registered
if it is available, vaapidecodebin code can be simplified a lot, removing all
the code required to check if the VA video processor was available.
https://bugzilla.gnome.org/show_bug.cgi?id=768899
Delay the GstVaapiDisplay instantiating until when changing the state from
READY to PAUSE. In this way the element has more chances to find an already
created GstVaapiDisplay, or a GL context, in the pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=766206
The function gst_vaapi_create_display_from_gl_context() cretes a
GstVaapiDisplay given a GstGLContext. But it didn't created a GLX VA display
when the GL platform was GLX, but a plain X11 VA display.
This patch fixes that, by querying the GL platform earlier.
https://bugzilla.gnome.org/show_bug.cgi?id=766206
Using the GstContext mechanism, it is possible to find if the pipeline
shares a GstGLContext, even if we are not to negotiating GLTextureUpload
meta. This is interesting because we could negotiate system memory caps
feature, but enable DMABuf if the GstGLContext is EGL with some extensions.
https://bugzilla.gnome.org/show_bug.cgi?id=766206
Since the driver checkup is done at registering, there is no need to do it
when changing the element state from NULL to READY. This patch remove this
vmethod from vaapidecode.
Query the GstVaapiDisplay to know if the driver supports video
postprocessing. If does, then register vaapipostproc and vaapidecodebin
elements.
This patch will simplify the design of vaapidecodebin.
https://bugzilla.gnome.org/show_bug.cgi?id=724352
Move some of the logic in gst_vaapi_plugin_base_driver_is_whitelisted() to a
new function gst_vaapi_driver_is_whitelisted(), in this way, it can be used
when registering the plugin's feature set with the test VA display.
https://bugzilla.gnome.org/show_bug.cgi?id=724352
This patch tries to instantiate a GstVaapiDisplay when registering the plugin
features, if it fails, no gstreamer-vaapi element is registering.
The purpose of this patch is to avoid a situation where the user has
gstreamer-vaapi installed but their VA-API setup is not functional, which may
lead to unexpected behavior.
https://bugzilla.gnome.org/show_bug.cgi?id=724352
There are two main external dependencies that define the feature set of this
plugin: a) the kernel and b) the VA driver
This patch tracks both dependencies, if any of them change, GStreamer will
re-inspect the plugin.
The kernel is tracked through the device files /dev/dri/card*
The VA driver is tracked through the files VA_DRIVERS_PATH/*_drv_video.so,
where VA_DRIVERS_PATH is the one defined in libva package configuration. Also,
the environment variables LIBVA_DRIVERS_PATH and LIBVA_DRIVER_NAME are tracked
since they modify the driver lookup.
Additionally, the environment variable GST_VAAPI_ALL_DRIVERS is tracked too.
https://bugzilla.gnome.org/show_bug.cgi?id=724352
This is a fix for a regression of previous commit, which updates the filters
only when the property is set, because it is also required to update the
filter when the color balance interface change its values.
In case that sink caps and src caps are same, and no filtering parameter set,
pass-through mode is enabled.
If new filtering parameter is set during playback, it makes it reconfiguring,
so that pass-through mode is changed
In addition, updating filter is performed during reconfiguration, if needed.
https://bugzilla.gnome.org/show_bug.cgi?id=751876
In order to handle correctly seek and other operations, vaapiencode should
flush all the remaining data from the encoder without pushing it downstream.
This patch implements the flush() vmethod, only after of pausing the
source pad task, and restarting it again after the flush stop.
https://bugzilla.gnome.org/show_bug.cgi?id=767176
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
To avoid surface-exhausted situation during reverse playback,
drop frames except for key frame.
Also, to avoid the corruption of the parser state, flush() vmethod
doesn't destroy the VA decoder when playing in reverse.
https://bugzilla.gnome.org/show_bug.cgi?id=742922
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
The queue in GstVaapiDecode adds an extra reference to the frames. This patch
unref that extra reference earlier making the code simpler to follow.
https://bugzilla.gnome.org/show_bug.cgi?id=768652
Calling drain() vmethod means "decode any data it can at this point, but that
more data may arrive after". Hence, vaapidecode should check if there is data
in the output adapter and process them, without destroying the decoded picture
buffer (dpb).
Since this operation is done by gst_vaapidecode_internal_flush(), the operation
was refactored into a new function gst_vaapidecode_flush_output_adapter().
https://bugzilla.gnome.org/show_bug.cgi?id=768652
Calling flush() vmethod means "to flush all remaining data from the decoder
without pushing it downstream".
Nonetheless flush() is calling gst_vaapidecode_internal_flush(), which calls
gst_video_decoder_have_frame() if there is still something in the input
adapter, which may push buffers to downstream by calling handle_frame().
This patch changes this behavior by calling gst_vaapidecode_purge() rather
than gst_vaapidecode_internal_flush(), which does what we want: flushes the VA
decoder and releases all the rest of decoded frames.
https://bugzilla.gnome.org/show_bug.cgi?id=768652
This patch is a fix for my bad review of commit 6d73ca8d. The element should
be able to return the available raw caps handled by the VA display, but that
only should happen when there a VA display. If there's none, the element
should use the caps template.
https://bugzilla.gnome.org/show_bug.cgi?id=768161
Though USE_{JPEG,VP8,VP9,H265}_ENCODER macros definition depend on USE_ENCODER
macro, it is clearer to nest them, showing explicitly the dependency relation.
Under certain conditions the element might receive a positive context query
but without a context instance. This situation will lead to a segmentation
fault when traversing the context list in the pipeline.
https://bugzilla.gnome.org/show_bug.cgi?id=767946
If vaapisink received a caps query before getting a VA display, it returned
only the surfaces related caps. This behavior broke the autovideosink
negotiation.
This patch returns the pad's template caps if no VA display, otherwise the
caps are crafted as before.
https://bugzilla.gnome.org/show_bug.cgi?id=767699
In cases where we know the video meta must be present, add it to
the pool configuration.
Signed-off-by: Scott D Phillips <scott.d.phillips@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=766184
if gst_buffer_pool_set_config returns FALSE, check the modified
config and retry set_config if the config is still acceptable.
Signed-off-by: Scott D Phillips <scott.d.phillips@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=766184
There's no need to check for the display in the plugin object when
decide_allocation() vmethod is called, because the display will created or
re-created along the method execution.
Get the pool config just before use it, to avoid a memory leak if the
allocator cannot be instantiated. Similarly, return FALSE if the configuration
cannot be set, avoid keep a not used allocator in the pool.
Instead of instantiating an allocator per vaapivideobufferpool, only one
allocator is instantiated per element's pad and shared among future pools.
If the pad's caps changes, the allocator is reset.
https://bugzilla.gnome.org/show_bug.cgi?id=765435
Originally, vaapivideobufferpool has a set of boolean variables for the
buffer configuration options.
This pach changes these boolean variables for a single bitwise, just as
it is used in pluginbase. Hence, the internal enum was moved to
vaapivideobufferpool header.
https://bugzilla.gnome.org/show_bug.cgi?id=765435
This patch refactors the code in pluginbase in order to centralize the buffer
pool instantiation. As the buffer pool config may have different options, these
are gathered using a bitwise flag.
https://bugzilla.gnome.org/show_bug.cgi?id=765435
Originally vaapivideobufferpool instantiates its own allocator regardless the
received configuration, and it relies in custom configuration options to
choose which kind of allocator instantiate.
This patch transfers the responsibility of the allocator instantiate to
vaapipluginbase and pass it to the vaapivideobufferpool through its
configuration.
* gst/vaapi/gstvaapipluginbase.c
+ set_dmabuf_allocator(): inserts a dmabuf allocator in the bufferpool
+ ensure_sinkpad_buffer_pool(): set a normal vaapi video allocator in
bufferpool configuration
+ gst_vaapi_plugin_base_propose_allocation(): call set_dmabuf_allocator() if
needed.
+ gst_vaapi_plugin_base_decide_allocation(): set a normal vaapi video
allocator in bufferpool configuration
* gst/vaapi/gstvaapivideobufferpool.c
+ gst_vaapi_video_buffer_pool_set_config(): instead of instantiate the
allocator, process the received one through its configuration.
* gst/vaapi/gstvaapivideobufferpool.h: removed
GST_BUFFER_POOL_OPTION_DMABUF_MEMORY since it is not used anymore.
* gst/vaapi/gstvaapivideomemory.c
+ gst_vaapi_is_dmabuf_allocator(): new helper function to identify a dmabuf
allocator with the vaapi qdata.
https://bugzilla.gnome.org/show_bug.cgi?id=765435
Add a mutex to postproc to protect concurrent access to data members.
Previously set_caps() could release the allowed_srcpad_caps while
transform_caps was in the middle of using it.
Signed-off-by: Scott D Phillips <scott.d.phillips@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=766940
Since gstreamer-vaapi is coupled with gstreamer releases, there is no need to
keep compatibility definition.
This patch removes the definition of
GST_BUFFER_POOL_OPTION_VIDEO_GL_TEXTURE_UPLOAD_META since it is in
gst-plugins-base version 1.2.2
This is a helper function to improve the readability of
ensure_sinkpad_buffer_pool(). It makes clearer when the buffer pool needs to be
re-instantiated.
This buffer pool may still be processing buffers when a caps renegotiation is
done. This one-liner patch deactivates the pool to drain it before it
de-allocation.
Right now, the decoders create a buffer pool for their sink pad which is not
used at all, because the decoders have never proposed it to upstream.
This patch avoids the buffer pool instantiating when the element inherits from
the GstVideoDecoder class.
This patch is a bit of optimization, since the bufferpool configuration is get
when the pool is created. Hence, we only need to request it when the pool from
the allocation query is reused.
If the offered pool in decide_allocation() vmethod doesn't have the
VAAPI_VIDEO_META option, it is destroyed immediatly and the pointer cleared,
so it could be created later.
When validating the caps from bufferpool config, this patch distinguishes the
error from no caps received (NULL) from the invalid caps (cannot be converted
into GstVideoInfo structure).
Use GST_{ERROR,WARNING}_OBJECT instead of GST_{ERROR,WARNING}, thus the logs
will show the name of the vaapipluginbase instance that failed.
Also, the code-style is fixed, where some error labels need to be surrounded
by braces.
gst_video_info_set_format() and gst_video_info_from_caps() call, internally,
gst_video_info_init(), hence it is not required to call it before them. This
patch removes these spurious calls.
Instead of a dummy alloc() vmethod, the allocator instance set the flag
GST_ALLOCATOR_FLAG_CUSTOM_ALLOC, which is used by the framework to avoid call
gst_allocator_alloc() on the allocator.
This function helper make sense for GStreamer 1.2, but it is not helpful for
greater version since the validation is already done in the API implementation.
Thus, it is removed.
Instead of using gst_video_info_to_caps () to generated the fixed src caps,
this patch enables the first step for caps negotiation with a possible
following caps filter.
_get_preferred_caps() will traverse the possible src caps looking for the one
wit the preferred feature and the preferred color format. Then the color
format, the frame size and the frame rate are fixated.
https://bugzilla.gnome.org/show_bug.cgi?id=758548
Instead of the allowed_srcpad_caps variable, this patch uses the othercaps
from fixate_caps() vmethod to find the preferred caps feature and color
format.
https://bugzilla.gnome.org/show_bug.cgi?id=758548
When running transform_caps() vmethod, returning the srcpad caps, the caps are
early restricted to the element properties set: width, height, format and
force keep aspect.
A new file was added gstvaapipostprocutil.{c,h} where the utilities functions
are stored.
https://bugzilla.gnome.org/show_bug.cgi?id=758548
Instead of #ifdef it should be used #if becasuse USE_GST_GL_HELPERS is always
defined in config.h, but it would be 0 or 1 depending on the configure output.
https://bugzilla.gnome.org/show_bug.cgi?id=765702
If the backend driver vendor string is not in a white-list, and the
environment variable GST_VAAPI_ALL_DRIVERS is not set either, the decoder will
change it state from NULL to READY, hence the auto-plug mechanism will look
for another decoder.
This patch assumes the GstContext has already being shared along the pipeline
and the element has a valid GstVaapiDisplay instance.
https://bugzilla.gnome.org/show_bug.cgi?id=764673
In bug 757598 was added the set_context() vmethod chain up in
GstVaapiPluginBase. But it is buggy, since the parent_class address is
assigned to the last element which called gst_vaapi_plugin_base_class_init().
No error has shown up since none of the element's base classes redefined
set_context() vmethod from GstElement, so always the correct function was
called. Still this code is wrong and this patch make it right.
Since set_context() is the same code, a macro is used to implement that code
in all the gst-vaapi elements.
https://bugzilla.gnome.org/show_bug.cgi?id=765368
Since commit 859a2b2, in vaapidecode, allocation query can be different from
the negotiated caps.
When connecting the vaapidecoder to the vaapipostprocessor, the last one will
resize the frame to the negotiated, if and only if, some other parameter is
activated to avoid the passthrough. If it is not, the surface won't be mapped
into a image. If not, the image won't be resized and the output buffer would be
mapped.
This patch will break the passthrough if the allocation query is different
from the negotiation caps, forcing the resizing.
https://bugzilla.gnome.org/show_bug.cgi?id=765095
Instead of using the srcpad template caps for filtering the peer caps, the
function gst_vaapi_find_preferred_caps_feature(), now receives a new parameter
for the element's allowed caps.
With this modification, the vaapipostproc element simplifies a bit its code.
https://bugzilla.gnome.org/show_bug.cgi?id=765223
The native format parameter in gst_vaapi_find_preferred_caps_feature() can be
saved if the out format is used for both: in and out. Thus the code is more
readable.
https://bugzilla.gnome.org/show_bug.cgi?id=765223
If the downstream feature is system memory, the surface has to be mapped,
hence a warning message is logged saying that the driver has to do color
conversions. This might be troublesome because not all the color conversion
combinations are supported by the VA-API drivers, and there is not a reliable
way to know them before hand.
https://bugzilla.gnome.org/show_bug.cgi?id=765223
Instead of setting the requested format by the caller, the function
gst_vaapi_find_preferred_caps_feature() now returns, in the output parameter,
the negotiated format.
A new helper function was added: gst_vaapi_find_preferred_format(), which,
given the format list from the negotiated caps, will choose the best one, if
possible, given the native format.
https://bugzilla.gnome.org/show_bug.cgi?id=765223
This patch simplifies the function gst_vaapi_find_preferred_caps_feature().
Instead of intersecting custom caps to find the preferred feature, the peer
caps are traversed in order to find the preferred feature, according to an
ordered feature priority list.
In the case of GLTextureUploadMeta, the colour format is computed using
GstVideoInfo of the selected fixed caps.
https://bugzilla.gnome.org/show_bug.cgi?id=765223
As decoded_info is assured to be valid when gst_vaapidecode_update_src_caps()
is called, then we don't need to verify or replace it with the sinkpad info
(reference state).
https://bugzilla.gnome.org/show_bug.cgi?id=764316
active, do_pool_renego and do_outstate_renego class variables were used to
indicate when negotiate downstream once, but now that each time a new surface
resolution is pop out a renegotation verified, these variable are not required
anymore.
https://bugzilla.gnome.org/show_bug.cgi?id=764316
When resolving bug 753914, a custom allocation query was added, overlapping
the responsibilities of GstVideoDecoder.
But with the merge of the patches from bug 764421 this overlapping was not
required anymore. This patch restores this situation setting the
allocation_caps in the GstVideoCodecState when needed.
https://bugzilla.gnome.org/show_bug.cgi?id=764316
The plugins should not expose the feature meta:GstVideoGLTextureUploadMeta in
their caps templates if they were not compiled either with GLX or EGL support.
The compiler might complain of gst_vaapi_create_display_from_handle() being
unused if both EGL and GLX are disabled. This patch avoid that compilation
error.
There is no difference in VAAPI surface caps between encoders and decoders.
Thus, the patch makes a simplification by removing encoders specific caps and
shares the same definition of VAAPI surfaces caps for all the elements.
The P010 video format is the native format used by the vaapi intel driver
for HEVCMain10 decode . Add support for planes and images of this video format.
https://bugzilla.gnome.org/show_bug.cgi?id=759181
Instead of using a single value for the texture type, use an array with 4
elements, just as the GstVideoGLTextureUploadMeta, avoiding a buffer
overflow.
https://bugzilla.gnome.org/show_bug.cgi?id=764231
After the decoding of first frame, try to extract the exact
decoded surface format using vaDeriveImage and keep this
as the format in decoded_info.
https://bugzilla.gnome.org/show_bug.cgi?id=753914
-- Maintaing decoded surface resoluton and actual display resoultion separately
-- Before pushing every frames downstream, check for the requirement of pool negoation and
output_state negotiation: This is needed to avoid multiple issuses with cropping,
multi-resoluton video handling, more complex multi resolution decode scenarios for vp9decode,
possible wrong behaviour from upstream element to report uncropped values etc. Due to these reasons,
We can't just reliably use the resolution change notification from libgstvaapi for pool renegotiation too.
This is slight overhead, but safe enough. Optimization could be possible though.
https://bugzilla.gnome.org/show_bug.cgi?id=753914
This will help to consoidate the out caps negotiation to a single place,
which will make the code simpler, allows to get the exact decoded format
if needed and the selected chroma type too.
https://bugzilla.gnome.org/show_bug.cgi?id=753914
This patch is the continuation of commit 1e1d3b1d because the function
gst_vaapidecode_get_type() got undefined since then.
Now, the macro GST_VAAPIDECODE is a simple cast to the GstVaapiDecode
structure. The rest of the GObject handling macros were deleted too.
As JPEG decoder has been split and demoted, it cannot be handled by
vaapidecodebin
Added a fixme comment regarding the future removal of vaapidecode.
https://bugzilla.gnome.org/show_bug.cgi?id=734093
Don't expose the the vaapidecode GType, instead expose a function
which will register element.
This is the first step to split the decoder by codecs.
https://bugzilla.gnome.org/show_bug.cgi?id=734093
1\ Unref gl_display and gl_window as soon they are not needed.
2\ Remove an unneeded display type check, since is handled by
gst_vaapi_created_display_from_handle()
3\ Unref vaapi's display if the display cannot be bind to a GL API.
Modified-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=763354
In commit 6034734d I forgot to add the caps filter intersection in the
getcaps() vmethod generating a regression when a capsfilter is set in the
pipeline.
This commit adds the caps filter intersection.
The usage of getcaps() vmethod is preferred than to handle manually the sink's
caps query.
In order to avoid function declarations, this patch moves the class_init()
method to the end of the file.
Since we are only supporting current GStreamer version, since 1.3
gst_buffer_pool_config_add_option() checks if the option to add is
already set. There is no need to do it ourselves.
icamerasrc is another gstreamer plugin using to capture RAW
frames from camera device. It is based on libcamhal library.
There are some properties available to control icamera behavior.
Signed-off-by: Lim Siew Hoon <siew.hoon.lim@intel.com>
Tested & Reviewed: Zhu Haiyang <haiyang.zhu@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=759481
Fixme: This is the similar workaround we done for v4l2src.
The workaround will be removed once we fix#755072
Trying to comply with GStreamer's element names, this patch renames the
encoders using the name format vaapi{codec}enc.
In this way, the plugin documentation is linked correctly.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
As gst-indent generated ugly code in these cases, this patch changes the used
idiomatic into other one.
No functional changes were introduced.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
In gstvaapipluginbase.c we are using the macro USE_GST_GL_HELPERS to guard the
code related with GstGL. Nonetheless, in gstvaapipluginbase.h we are using
HAVE_GST_GL_GL_H macro in order to include the GstGLContext's header.
We should use only one to be homogeneous. This patch sets USE_GST_GL_HELPERS
in the header file.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
This dependency was added in gstvaapidecodebin with the call
gst_missing_element_message_new().
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
This header is not used anymore since it declares parsers that are
already in GStreamer 1.6
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
As gstreamer-vaapi now only supports from GStreamer 1.6, this patch removes
all the old GStreamer version guards.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
Since we don't install libraries anymore, it makes no sense to keep
versioning them according to the gstreamer's version.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
When transforming downstream caps we should check for ANY caps from peer pad,
otherwise we get a segmentation fault.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=759893
When gst_vaapi_plugin_base_get_input_buffer() fail to copy the input buffer
into a VAAPI buffer, the return value is GST_FLOW_NOT_SUPPORTED, and it was
ignored by the vaapisink, leading to a segmentation fault.
This patch ignores the frame that generated the GST_FLOW_NOT_SUPPORTED
returned by gst_vaapi_plugin_base_get_input_buffer(), avoiding the
segmentation fault, but doing and effort to continue rendering. This is
the same behavior of ximagesink.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=759332
As gsth265parse was added in GStreamer 1.4, and gstreamer-vaapi still support
GStreamer 1.2, the patching of gsth265parse must be conditional to the target
GStreamer version.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=755525
This is a continuation of commit fc8a0d12
When declaring BUILT_SOURCES, those files should not be distributed. This
patch avoids the distribution of the generated source code.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=755525
When the source caps change, the filter is destroyed and recreated.
Nonetheless, this happens every time the vaapipostproc starts, since the caps
change detection algorithm does not take in consideration when the caps are
set by first time.
This patch intents to be an optimization, to avoid a useless filter
destroy-creation cycle when the sources caps are set for first time.
The new helper function video_info_update() is a refactorization to avoid
duplicated code.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=758007
The signature is video_info_changed(old_vip, new_vip). Nonetheless the callers
swapped the the order. This didn't raise problems since the comparison of both
structures were not affected by its semantics.
But still it would be better to fix this to keep the coherence of the code.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=758007
When runnig the `make dist` target from a clean tree, it fails because
if could not find the copied files from codecparsers submodule.
They weren't copied because they weren't declared as built sources.
This patch removes the stamp mechanism and use the actual file list to copy
as the built sources. Also it fixes the duplication of the parser files.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=755525
Rather than create a dummy display, if none has propagated as a context, we
should try to get the one from vaapidecode.
As the bin is already in READY state, the vaapidecode should be also in that
state. That means that the contexts have been negotiated, and it should have
already a display.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757957
The former approach to left the bin unfinished has some problems: the context
cannot be shared because the vaapidecode is unlinked in many cases, leading to
creating a VADisplay twice.
Initially the bin is fully functional, constructed as
(-----------------------------------)
| vaapidecodebin |
| (-------------) (-------) |
|<--| vaapidecode |--->| queue |--->|
| (-------------) (-------) |
(-----------------------------------)
When the context is shared and the VADisplay has VPP capabilities, before
changing to READY state, the bin is reconfigured dynamically, adding the
vaapipostproc element afeter the queue:
(--------------------------------------------------------)
| vaapidecodebin |
| (-------------) (-------) (---------------) |
|<--| vaapidecode |--->| queue |--->| vaapipostproc |--->|
| (-------------) (-------) (---------------) |
(--------------------------------------------------------)
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757957
Delay the bin configuration until changing to READY state. This is because we
should add the vaapipostproc element until the vaapidecode has emitted the
HAVE_CONTEXT message, so de gst_bin_add() could set the context set to
vaapipostproc.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757957
Since gstreamer 1.4 is not required to have pad query functions if the query
vmethods are used.
This patch guards out the pad query functions for gstreamer < 1.4
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757629
GstVideoEncoder, the base class of vaapiencode, added support for pad queries
as virtual methods since gstreamer 1.4. This patch enables those vmethods,
while keeps support for previous versions of gstreamer.
This patch is relevant since GstVideoEncoder takes care of other queries that
we are currently ignoring.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757629
A caps query can occur before the element has a display. In that case, the
element can return its pad's template. But when the element already has a
display, and the caps probe fails, the element shall return an empty caps, so
the auto-plug could try with another decoder.
If the element has a display and the caps probe works, then the computed caps
should be returned.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
Caps query can happen before the element has a bus. The display creation should
be should occur on the context negotiation, when the bus is already configured.
Then at caps query no display should be created.
Instead of force the display creation, we graciously fail the allowed_caps()
creation.
This change only applies for vaapidecode and vaapisink. The vaapipostroc, as a
basetransform descendant, seems to be not affected by this, nor the encoders.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
The current context query handling design is flawed: the function
gst_vaapi_reply_to_query() returns FALSE either if the query is not a
GST_CONTEXT_QUERY of if the query could not be handled correctly. But the
pad query function should handle differently each case.
This patch changes the gst_vaapi_reply_to_query() for
gst_vaapi_handle_context_query() and changes it usage in all the vaapi plugins
to match the correct context query handling.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
When processing the GST_CONTEXT_QUERY we should not lose the previous
context in the query, we should only add our display structure.
This patch copies the old context, if it is there, and stamp our display on
it. Otherwise, a new context is created.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
This function set the display to an already created context. This function is
going to be used later.
Also, gst_vaapi_video_context_new_with_display() now uses this function.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=757598
