Commit graph

474 commits

Author SHA1 Message Date
Sebastian Dröge
7b2cfa6303 mpegtspacketizer: Fix typo in debug output 2014-03-29 10:33:45 +01:00
Sebastian Dröge
986c8782e4 tsdemux: Push next buffer after a discont with the DISCONT flag 2014-03-29 10:33:45 +01:00
Sebastian Dröge
264d7dbd89 tsdemux: Drain remaining data on disconts 2014-03-29 10:33:45 +01:00
Sebastian Dröge
d986d24d41 mpegtsbase: Flush if we receive a discont buffer 2014-03-29 10:33:45 +01:00
Sebastian Dröge
11bc356ce7 tsdemux: Don't dereference NULL if flushed before a program was selected 2014-03-29 10:33:45 +01:00
Sebastian Dröge
ba114b6b22 tsdemux: Ensure that all pending data is pushed even if the stream was not activated before
gst_ts_demux_push_pending_data() will check if it now can activate the
stream and add the pad, we don't have to check that ourselves.

Fixes playback of very short MPEG TS files.
2014-03-29 10:33:45 +01:00
Sebastian Dröge
0cecb44813 mpegtsbase: Fix pull mode scanning for PCR on small files
If a file does not contain 5 PCRs until it is EOS, or does not
contain more than 655360 bytes the PCR scanning algorithm just
aborted.
2014-03-29 10:33:45 +01:00
Jan Schmidt
bfe2994101 tsdemux: Fix mpegts_packetizer_set_current_pcr_offset()
When adjusting the PCR offset of groups, adjust the correct group
entry from the list - not the current group repeatedly.
2014-03-25 21:40:11 +11:00
Edward Hervey
6629ca8f2b tsdemux: Support Bluray DTS/DTS-HD and AC3+/TrueHD streams
Apart from just adding detection of the proper stream type, we also need to only
output the first substream (0x71) which contains the core substream.

While this does not provide *full* DTS-HD support (since it will miss the complementary
substreams), it will still work in the way legacy (non-DTS-HD) bluray players would work.

https://bugzilla.gnome.org/show_bug.cgi?id=725563
2014-03-15 18:09:12 +01:00
Thiago Santos
6b4ce0d04f tsdemux: store global tags to push later
Keep a list of current global tags around and push them
whenever a new stream is started. Also convert all stream
specific tags to global as they are stream specific for
the container, so they are global for the streams from
within that container.

https://bugzilla.gnome.org/show_bug.cgi?id=644395
2014-02-26 10:26:57 -03:00
Edward Hervey
fc34d163d8 mpegtsbase: Uncomment PAT clearup in _reset
The PAT is related to the stream, we therefore want it cleared along
with anything stream related.

This commented section was from the (old) mpegtsparse and *might* have
been related to speeding up DVB start-up. But we have another plan for that.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=724716
2014-02-21 14:07:51 +01:00
Edward Hervey
c229a87ac3 mpegtspacketizer: Fix ts_to_offset beyond last observed PCR
The requested TS might be beyond the last observed PCR. In order to calculate
a coherent offset, we need to use the last and previous-to-last groups.

https://bugzilla.gnome.org/show_bug.cgi?id=721035
2014-02-20 21:52:16 +01:00
Edward Hervey
3e6c1967c9 mpegtspacketizer: Remove or move variable assignments
To where they're needed
2014-02-07 11:54:07 +01:00
Edward Hervey
00bf61a0db mpegtsdemux: Update plugin license field
The original code (old mpegtsparse) from which this plugin was based on
was dual-licensed. This allowed usage of the code under any of the
licenses (which including LGPL):

"""
* Alternatively, the contents of this file may be used under the terms of
* the GNU Lesser General Public License Version 2 or later (the "LGPL"),
* in which case the provisions of the LGPL are applicable instead
* of those above. If you wish to allow use of your version of this file only
* under the terms of the LGPL, and not to allow others to
* use your version of this file under the terms of the MPL, indicate your
* decision by deleting the provisions above and replace them with the notice
* and other provisions required by the LGPL. If you do not delete
* the provisions above, a recipient may use your version of this file under
* the terms of the MPL or the LGPL.
"""

When refactored (leading to the creation of this new plugin), I chose all
new code to be LGPL-only (which was allowed for pre-existing code) by removing
the MPL sections.

The headers were all updated, but not the plugin license field. This commit
fixes this.
2014-02-06 14:28:54 +01:00
Sebastian Dröge
9682e44db6 tsdemux: We do not support the SKIP seek flag but that is not a problem 2014-01-30 20:29:58 +01:00
Amaury Medeiros
44a87d2109 tsdemux: Fix flags comparison operator precedence
Fix operator precedence, so the whole operation is
negated instead of only flags variable.

https://bugzilla.gnome.org/show_bug.cgi?id=722096
2014-01-28 13:56:44 +01:00
Andrey Utkin
0caa4cdfd8 tsdemux: Fix leak of PCROffsetGroup
https://bugzilla.gnome.org/show_bug.cgi?id=722462
2014-01-17 23:08:49 -03:00
Andrey Utkin
4d957e53e4 tsdemux: fix memleak of PCROffsetCurrent
https://bugzilla.gnome.org/show_bug.cgi?id=722145
2014-01-14 10:33:44 +01:00
Sebastian Dröge
84bd65b9bd tsdemux: Add HEVC / h265 support 2014-01-06 13:54:40 +01:00
Edward Hervey
64592da3e9 tsdemux: Demote GST_ERROR to GST_WARNING
discontinuities are not errors per-se and we handle them correctly.
2013-10-28 09:15:20 +01:00
Matthieu Bouron
84fbc08c25 mpegtsdemux: fix uninitialized variable warning
https://bugzilla.gnome.org/show_bug.cgi?id=710759
2013-10-25 12:26:23 +01:00
Edward Hervey
70d83b323b mpegtspacketizer: Skip packets with corrupted length
This is similar to what we do for packets with payload
2013-10-11 10:34:17 +02:00
Edward Hervey
5e50cd507c tsdemux: Refactor language tag extraction
subtitling descriptor needs to be used with a different method to extract
language codes.
2013-10-11 10:29:20 +02:00
Jesper Larsen
b6d33e5ce4 tsdemux: Use mpegts-lib for ISO 639 language tags
https://bugzilla.gnome.org/show_bug.cgi?id=709180
2013-10-07 10:23:22 +02:00
Jesper Larsen
279bdef4ea tsdemux: Return descriptor in get_descriptor
https://bugzilla.gnome.org/show_bug.cgi?id=709180
2013-10-07 10:23:22 +02:00
Steve Maynard
17ed696faa mpegts: Add SCTE/EISS sections and table types
https://bugzilla.gnome.org/show_bug.cgi?id=708688
2013-09-28 13:15:44 +02:00
Edward Hervey
0e9ce593bf tsdemux: Wait for valid PCR/offset obvervations
It is quite possible that we might get PTS/DTS before the first
PCR/Offset observation.

In order to end up with valid timestamp we wait until at least one
stream was able to get a proper running-time for any PTS/DTS.
Until then, we queue up the pending buffers to push out.

Once we see a first valid timestamp, we re-evaluate the amount of
running-time elapsed (based on returned inital running-time and amount
of data/DTS queued up) for any given stream.

Taking the biggest amount of elapsed time, we set that on the packetizer
as the initial offset and recalculate all pending buffers running-time
PTS/DTS.

Note: The buffer queueing system can also be used later on for the
dvb fast start proposal (where we queue up all stream packets before
seeing PAT/PMT and then push them once we know if they belong to the
chosen program).
2013-09-28 13:15:43 +02:00
Edward Hervey
2762ead5ef mpegtsdemux: New PCR<=>Offset estimation code
This allows:
* Better duration estimation
* More accurate PCR location
* Overall more accurate running-time location and calculation

Location and values of PCR are recorded in groups (PCROffsetGroup)
with notable PCR/Offset observations in them (when bitrate changed
for example). PCR and offset are stored as 32bit values to
reduce memory usage (they are differences against that group's
first_{pcr|offset}.

Those groups each contain a global PCR offset (pcr_offset) which
indicates how far in the stream that group is.

Whenever new PCR values are observed, we store them in a sliding
window estimator (PCROffsetGroupCurrent).

When a reset/wrapover/gap is detected, we close the current group with
current values and start a new one (the pcr_offset of that new group
is also calculated).

When a notable change in bitrate is observed (+/- 10%), we record
new values in the current group. This is a compromise between
storing all PCR/offset observations and none, while at the same time
providing better information for running-time<=>offset calculation
in VBR streams.

Whenever a new non-contiguous group is start (due to seeking for example)
we re-evaluate the pcr_offset of each groups. This allows detecting as
quickly as possible PCR wrapover/reset.

When wanting to find the offset of a certain running-time, one can
iterate the groups by looking at the pcr_offset (which in essence *is*
the running-time of that group in the overall stream).
Once a group (or neighbouring groups if the running-time is between two
groups) is found, once can use the recorded values to find the most
accurate offset.

Right now this code is only used in pull-mode , but could also
be activated later on for any seekable stream, like live timeshift
with queue2.

Future improvements:
* some heuristics to "compress" the stored values in groups so as to keep
  the memory usage down while still keeping a decent amount of notable
  points.
* After a seek compare expected and obtained PCR/Offset and if the
  difference is too big, re-calculate position with newly observed
  values and seek to that more accurate position.

Note that this code will *not* provide keyframe-accurate seeking, but
will allow a much more accurate PCR/running-time/offset location on
any random stream.
For past (observed) values it will be as accurate as can be.
For future values it will be better than the current situation.
Finally the more you seek, the more accurate your positioning will be.
2013-09-28 13:15:43 +02:00
Edward Hervey
5017ba84a7 mpegtspacketizer: No longer use a private struct
These are not public headers, it just adds complexity for no reason
2013-09-28 13:15:43 +02:00
Sebastian Dröge
d7c7f54734 mpegtsparse: Queue buffers until we have enough to know the caps
https://bugzilla.gnome.org/show_bug.cgi?id=708222
2013-09-27 16:10:54 +02:00
Arnaud Vrac
467e0151d3 mpegtspacketizer: rework TS packet sync and extraction
The previous code could enter an infinite loop because the adapter state
could get out of sync with its mapped data state after sync was lost.
The code was pretty confusing so it's been rewritten to be clearer.

The easiest way to reproduce the infinite loop is to use the breakmydata
element before tsdemux to trigger a resync.

https://bugzilla.gnome.org/show_bug.cgi?id=708161
2013-09-27 15:17:24 +02:00
Arnaud Vrac
85ad4f3ad6 tsdemux: fix buffer overflow
This can happen with a corrupt TS file, found with breakmydata element
plugged before tsdemux.

https://bugzilla.gnome.org/show_bug.cgi?id=708161
2013-09-27 15:10:23 +02:00
Sudip Jain
27739e8bb6 mpegtspacketizer: Correct condition check for current next indicator
https://bugzilla.gnome.org/show_bug.cgi?id=708106
2013-09-16 11:00:16 +02:00
Thiago Santos
efb27f19ec tsdemux: respect seqnums on seeks
Pass the seqnum to other events that are consequence of the
original seek event
2013-09-10 19:44:24 -03:00
Tim-Philipp Müller
cf791f6cb0 mpegtsdemux: fix possible read beyond end of buffer when resyncing 2013-08-27 17:05:44 +01:00
Edward Hervey
fd4fd13dc8 tsdemux: Refuse negative rates which we don't support yet
And remove a check which was done before
2013-08-21 14:44:38 +02:00
Edward Hervey
d6b55b8a66 mpegtsbase: Adapt for latest mpegts lib changes 2013-08-21 08:59:42 +02:00
Edward Hervey
21ebc7708d pesparse: Refactory secondary PES extension handling
Some streams had wrong values for the stream_id_extension, make sure
we only remember the valid ones.

For streams with PES_extension_field_length == 0, assume there's nothing
else.

For streams that state they have a TREF extension but don't have enough
data to store it, just assume it was produced by a non-compliant muxer
and skip the remaining data.

Only store remaining data in stream_id_extension_data instead of storing
data we already parse.
2013-08-14 13:41:37 +02:00
Edward Hervey
ddee83ef0b pesparse: Fix pes extension data length check
And remove length/data updates (we use the header size just below to
properly set them).

Based on feedback from Stas Sergeev <stsp@list.ru>

https://bugzilla.gnome.org/show_bug.cgi?id=657343
2013-08-14 10:39:46 +02:00
Edward Hervey
5208b8a050 pesparse: Remove unused argument
We always provided 0 as the offset and never used the returned value.

Based on feedback from Stas Sergeev <stsp@list.ru>

https://bugzilla.gnome.org/show_bug.cgi?id=657343
2013-08-14 10:33:14 +02:00
Edward Hervey
3b60f88437 mpegtspacketizer: Look harder for next sync position
If ever we lose sync, we were just checking for the next 0x47 marker ...
which might actually happen within a mpeg-ts packet.

Instead check for 3 repeating 0x47 at the expected packet size interval,
which the same logic we use when we initially look for the packet size.
2013-08-02 10:41:25 +02:00
Edward Hervey
c28acaa3c5 mpegtspacketizer: Fix PCR LUT table
We were only resetting the first 512 values of the lookup table instead
of the whole 8192.
This resulted in any PCR PID over 0x0200 ... ending up taking the first PCR
table around :(
2013-08-02 10:41:25 +02:00
Tim-Philipp Müller
646ba6b3df mpegts: private/teletext -> application/x-teletext 2013-07-30 16:08:17 +01:00
Sebastian Dröge
6812f96de4 gst: Don't swap start/stop for negative rates in the SEGMENT query 2013-07-29 12:14:08 +02:00
Sebastian Dröge
12981a5d82 tsdemux: Implement SEGMENT query 2013-07-29 11:02:55 +02:00
Edward Hervey
a45aa8fe48 tsdemux: Remove unused macros 2013-07-29 09:42:12 +02:00
Edward Hervey
edd69b2989 tsdemux: Add more AC3 detection cases
ATSC ac3 streams are always guaranteed to be AC3 if EAC3 descriptor
is not present
If stream registration id is 'AC-3' then it's also guaranteed to be AC3.
Finally if AC3 descriptor is present it's guaranteed to be AC3.

Only silences a warning, but still.
2013-07-29 09:42:11 +02:00
Edward Hervey
a76c658e8d tsdemux: Flush out pending data on EOS
Ensures downstream elements (like decoders) really get all the data
2013-07-29 09:42:11 +02:00
Edward Hervey
ca77865bce mpegtspacketizer: More AFC flags
I should have put those in a previous commit. sorry :(
2013-07-29 09:42:11 +02:00
Edward Hervey
cea403eaa5 mpegdefs: Simplify PCR/PTS/DTS => GST conversion macros
We know we will not overflow 64 bits, therefore just use direct
multiplication/division instead of the scale method (trims usage from
50 instruction calls to 2/3).
2013-07-29 09:42:11 +02:00
Edward Hervey
e6ebd9024e tsdemux: HDV only has mpeg 1 audio layer 2
Set that accordingly on the caps
2013-07-27 12:18:36 +02:00
Edward Hervey
8c60e42070 mpegtsdemux: Add more flag debugging for PES and TS packets
Helps with debugging issues. And also remove unused variable (opcr)

This will also allow us in the future to properly detect:
* random-access location (to enable keyframe observation and
  potentially seeking
* discont location (to properly handle resets)
* splice location (to properly handle new stream changes)
2013-07-26 08:17:17 +02:00
Edward Hervey
dbe350d380 pesparse: Demote a Warning
We actually now know what to do ... have a log message :)
2013-07-26 06:46:41 +02:00
Edward Hervey
1f7fa9be1d tsdemux: Remember requested seek rate and use it
The new seek handling re-creates the segment time information once it
has enough information after a seek.

The problem was that we'd completely ignore the requested rate. So store
that and use it in the newly created segment.

https://bugzilla.gnome.org/show_bug.cgi?id=694369
2013-07-24 15:51:46 +02:00
Edward Hervey
069a497d19 tsdemux: Create and send codec tag
Helps with applications that rely on presence of that tag for user-facing
information.

https://bugzilla.gnome.org/show_bug.cgi?id=702216
2013-07-23 15:11:51 +02:00
Sebastian Dröge
44e404fe41 tsdemux: Add support for group-id in the stream-start event 2013-07-23 10:33:31 +02:00
Sebastian Dröge
2a1877909f tsparse: Add support for group-id in the stream-start event 2013-07-23 10:33:31 +02:00
Douglas Bagnall
dfb101e0ed tsdemux: disentangle requested program number from active program number
The program_number attribute was overloaded, trying to indicate both
the currently playing program, and the program requested via the
"program-number" property.  The end result was that setting the
property didn't work (see #690934).

I added a new requested_program_number field rather than reviving the
current_program_number field because it seemed this would result in
fewer changes overall and be less confusing.  It breaks symmetry with
the "program-number" property, but it retains parallels with the likes
of program->program_number.

Because gst_ts_demux_reset is called after the properties have been
parsed, requested_program_number is initialised in gst_ts_demux_init.
Whether this is exactly the right place, I don't know.
2013-07-22 09:53:46 +02:00
Jesper Larsen
8e4f966018 tsdemux: fix program-number functionality
Setting the program-number property does not affect which program
is actually being demuxed.

Moving the initialization of the program_number from
gst_ts_demux_reset to gst_ts_demux_init seems to fix this issue.

https://bugzilla.gnome.org/show_bug.cgi?id=690934
2013-07-22 09:53:46 +02:00
Edward Hervey
1b1b3a40d7 mpegtsdemux: Remember seek sequence number
* Avoids handling twice the same seek (can happen with playbin and files
  with subtitles)
* Set the sequence number of the segment event to the sequence number of
  the seek event that generated it (-1 for the initial one).
2013-07-15 11:20:40 +02:00
Arnaud Vrac
024aa47f64 tsdemux: implement seeking in push mode 2013-07-15 11:20:40 +02:00
Arnaud Vrac
388c28381f tsdemux: recalculate new segment after byte seek
The seeking start time is approximated from the seek offset in bytes
using the accumulated PCR observations, so on a VBR stream there might
be a big difference between the actual PCR and the estimated one after
the seek. This might result in a long wait to skip all out of segments
packets.

Instead we just recalculate the new segment to start at the first PTS
after the seek, so that playback starts immediatly.
2013-07-15 10:51:28 +02:00
Edward Hervey
8ca1751f00 mpegtsdemux: Avoid parsing section without enough data
This is actually a workaround (we'll be skipping the upcoming section)

This will only happen for sections where the beginning is located within
the last 8 bytes of a packet (which is the minimum we need to properly
identify any section beginning).

Later we should figure out a way to store those bytes and mark that
some analysis needs to happen. The probability of this happening is
too low for me to care right now and do that fix. There is a good chance
that section will eventually be repeated and won't end up on such border.
2013-07-09 12:25:11 +02:00
Edward Hervey
2fb7b87140 mpegtsdemux: Avoid vmethod calls
Depending on usage, tsparse and tsdemux might not need to be called
when new section/pes-data is available.
2013-07-09 12:25:11 +02:00
Edward Hervey
61b30175b3 mpegtsdemux: Remove unneeded variables
* packet.origts is no longer used since the PCR refactoring done ages ago
* known_packet_size is a duplicate of packet_size != 0
* caps was never used outside of the packetizer
2013-07-09 12:25:11 +02:00
Edward Hervey
f58f13e874 mpegtsdemux: Fix multiple-SI detection/parsing
We had two issues with the previous code:
1) We were badly handling PUSI-flagged packets. We were discarding the
   initial data (if pointer != 0) whereas we should have been accumulating
   it with the previous data (if there was a continuity of course).
   => First series of information loss
2) We were not checking whether there were more sections after the end
   of one (i.e. when the following byte was not a stuff byte).

This fixes those two issues.

Fixes #677443

https://bugzilla.gnome.org/show_bug.cgi?id=677443
2013-07-07 08:29:37 +02:00
Edward Hervey
513417e0ff mpegtbase: Fix switch/case typo
Ended up trying to analyze PMT ... with a PAT :(
2013-07-07 07:21:46 +02:00
Edward Hervey
1c96c79b88 mpegtsdemux: Handle private section streams
Until now we simply ignored those streams (since we couldn't do anything
with it anyway). Now that we have the mpegts library and we offload the
section handling to the application side we can properly identify and
extract them.

By default it is disabled for tsparse and enabled for tsdemux, but there is
a property to change that.

This should open the way to properly handle all private section streams,
including:
* DSM-CC
* MHEG
* Carousel data
* Metadata streams (though I haven't seen any of those in the wild)
* ... And all other specs/protocols making use of those

Partially fixes #560631
2013-07-06 14:50:52 +02:00
Edward Hervey
a3b6b1a951 mpegtsdemux: Handle registration descriptor for programs and streams
* Allows us to simplify some code and prepare for future cleanups.
* Remove useless casts
* Add some FIXME regarding VC1
2013-07-06 10:59:54 +02:00
Edward Hervey
9da7551993 mpegtsbase: Remove no-longer needed code
Since we now send all sections to the packetizer, we no longer need to do
anymore in-depth checks for the validity of a section.

The choice boils down to:
1) Is it from a known PES pid ? If so pass it on (which might be just pushing
   downstream in the case of tsparse, or accumulating PES data for tsdemux)
2) Is it from a known SI pid ? If so pass it to the section packetizer
2013-07-05 17:25:17 +02:00
Edward Hervey
b7bba5658a mpegtsdemux: Fix compilation with debugging disabling
We previously weren't using that variable ...
2013-07-05 10:57:34 +02:00
Edward Hervey
7814ed196b mpegtsdemux: Switch to using GstMpegTsStreamType
We still have some other stream types which haven't been ported, but
we will do so once we have defined the enums in the mpegts library.

Also add some FIXMEs regarding items discovered during analysis
2013-07-04 08:45:32 +02:00
Edward Hervey
1f2bb15618 mpegtsdemux: GstMpegTS => GstMpegTs 2013-07-03 14:00:58 +02:00
Edward Hervey
92edd82c86 mpegtsdemux: Switch to MPEG-TS SI library
* Only mpeg-ts section packetization remains.
* Improve code to detect duplicated sections as early as possible
* Add FIXME for various issues that need fixing (but are not regressions)

https://bugzilla.gnome.org/show_bug.cgi?id=702724
2013-07-03 09:17:25 +02:00
Edward Hervey
358a68e65b mpegdesc: Extend list of known descriptors
Add the various ATSC ones
2013-06-24 14:55:28 +02:00
Edward Hervey
26689fc437 mpegtsbase: Only warn for added streams when needed
We use add_stream(stream_type:-1) to ensure a programs' PCR Stream is
also taken into account. For most programs this will re-use an
existing ES stream.

So only warn that we are re-adding a stream if it was already present
AND it is not to ensure the PCR stream is taken into account.
2013-06-24 08:24:58 +02:00
Edward Hervey
f9b3b46ab5 mpegtspacketizer: Speed up section parsing
Only create subtables when needed. It was previously creating one every
single time ... to check if one was present.
And speed up code to detect whether a subtable was already present or not.

Overall makes section pushing 2 times faster.
2013-06-24 07:49:34 +02:00
Edward Hervey
15e3afc099 mpegdesc: Extend list of known descriptors
From ITU-T H222.0 (06/2012). Freely available from itu.int
2013-06-24 07:49:34 +02:00
Edward Hervey
9fd7f1c082 mpegtspacketizer: Speedup packet parsing
Avoid using bitshifting where not needed.

Speeds up packet parsing by 3% (this is *the* hotspot of mpeg-ts elements).
2013-06-24 07:49:34 +02:00
Edward Hervey
0592bcc3c9 mpegtspacketizer: Better detect already seen section
In some cases (NIT on highly-populated DVB-C operator for example), there
will be more than one section emitted for the same subtable and version
number.

In order not to lose those updates for the same version number, we checked
against the CRC of the previous section we parsed.

The problem is that, while it made sure we didn't lose any information, it
also meant that if the same section came back (same version, same CRC) later
on we would re-process it, re-parse it and re-emit it.

This version improves on that by keeping a list of previously observed CRC
for identical PID/subtable/version-number and will only process sections if
they really were never seen in the past (as opposed to just before).

On a 30s clip, this brings down the number of NIT section parsing from 4541
down to 663.

https://bugzilla.gnome.org/show_bug.cgi?id=614479
2013-06-23 09:06:15 +02:00
Edward Hervey
c0ce94dbf2 mpegtspacketizer: Speed up NIT parsing
Avoid duplicating the delivery structure, and instead give it to the
receiving container.
2013-06-19 19:31:12 +02:00
Edward Hervey
40bcf48b0c mpegtbase: simplify code
We don't need generic methods for push/flush since we know all the
subclass that we control
2013-06-19 12:29:47 +02:00
Edward Hervey
79e63e3daf mpegtsdemux: Fix for compiling without GST_DEBUG
Protect debug-only variables/usage, and in one case remove a useless
variable.
2013-06-19 12:29:46 +02:00
Edward Hervey
e66d543f00 tsparse: Ensure initial events are sent in the right order
First send stream-start, then caps, then segment.

The segment we push is from upstream in push-mode. If we work in pull-mode
then we initialize the base segment to BYTES.

https://bugzilla.gnome.org/show_bug.cgi?id=702422
2013-06-19 07:40:28 +02:00
Arnaud Vrac
a5402d6eeb tsdemux: fix M2TS stream resync
Sync byte scan is incorrect for M2TS streams because the timestamp 4
bytes were not included in the flush size. This can result in an
infinite loop.

Rework the scan code to be clearer and work in all cases.
2013-06-12 08:01:24 +02:00
Arnaud Vrac
065d421d34 tsdemux: move some debug prints at the log level 2013-06-12 08:01:20 +02:00
Josep Torra
28a2902a7b tsdemux: fixes seeking in pull mode
Preserve the current segment and observations in pull mode seeks with
flushing.

https://bugzilla.gnome.org/show_bug.cgi?id=698050
2013-06-12 08:01:06 +02:00
Edward Hervey
0809770d26 mpegtspacketizer: Fix leak
Since we were manually setting GValue to the GValueArray, we also need
to specify how many were set, otherwise all values in the array will
be leaked.
2013-06-05 15:23:18 +02:00
Edward Hervey
877019ae00 mpegtspacketizer: Speedup TDT/TOT parsing
Use quarks where needed, makes it 2.5 times faster
2013-06-05 13:39:14 +02:00
Edward Hervey
824f08d1d8 mpegtspacketizer: Fix string leak
The description/text get copied in the structure.
2013-06-05 13:21:29 +02:00
Edward Hervey
f3bf40e2b0 mpegtspacketizer: Speed up descriptor parsing/packing
descriptors are stored as a GValueArray of GString. The downside is
that there is no way to "pass" ownership of a GValue to a GValueArray
which previously resulted in expensive copy/free of the (already expensive)
GString.

Here we estimate first the size of the GValueArray, then create it,
then directly use the GValue of that array.

Speeds up total SI parsing by ~30%
2013-06-05 12:49:09 +02:00
Edward Hervey
e6f0986b9e mpegtspacketizer: Use gst_value_list_append_and_take_value
Avoids doing the expensive copy of structures/arrays/...

Speeds up parsing SI by about 50%
2013-06-05 12:48:05 +02:00
Edward Hervey
b378b7e9d6 mpegtspacketizer: Avoid copying GValueArray
Just give the GValueArray to the container GValue.
2013-06-05 11:27:05 +02:00
Michael Rubinstein
e6c8224609 mpegtsdemux: Free memory behind GString if we don't use it
https://bugzilla.gnome.org/show_bug.cgi?id=700903
2013-05-25 15:49:21 +02:00
Edward Hervey
ce441cbff7 mpegtsbase: Post an error message when EOS'ing without source pads
This ensures we don't "hang" when files can't be decoded, or contain
no valid streams.
2013-05-23 14:59:34 +02:00
Edward Hervey
7837cab44e tsdemux: Demote a warning to debug level
We will get it for virtually every first packets.
2013-05-23 14:59:34 +02:00
Edward Hervey
65ba9b4756 tsdemux: convert packet PTS/DTS as soon as possible
We let the mpegtspacketizer deal with pcr wraparound/resets.

https://bugzilla.gnome.org/show_bug.cgi?id=674536
2013-04-26 15:49:18 +02:00
Edward Hervey
05b51dfec0 mpegtsdemux: header cleanups/updates 2013-04-26 15:49:18 +02:00
Thiago Santos
d8b8809d57 tsdemux: Fix caps string leak 2013-04-24 12:28:17 +02:00
Greg Rutz
2306d51d9d tsdemux: Add support for Motorola DigiCipher II MPEG2 video
Since there is a conflict between the DCII stream type and BluRay
stream types, moved the processing of BluRay-specific stream types
to the beginning of the function.  Only if a BluRay stream type
IS NOT found do we proceed to check the rest of the stream type
identifiers

Previous code was also "sort-of" handling a similar conflict between
BluRay AC3 audio and standard AC3 audio.  Moved the special case BluRay
AC3 handling in the main switch statement to the new BluRay-specific
switch.

https://bugzilla.gnome.org/show_bug.cgi?id=697892
2013-04-18 09:30:58 +02:00
David Schleef
303a2eaec4 mpegtsdemux: check value before using as denominator 2013-04-15 17:05:30 -07:00
Sebastian Dröge
e51cd4fe2f gst: Add better support for static plugins 2013-04-15 15:59:22 +02:00
Sebastian Dröge
2713fd1058 tsdemux: Check the continuity counter for non-section packets too
And if we detect a discontinuity there (like... when losing packets
or having MPEGTS over raw UDP with out-of-order packets) we just
drop the corresponding packet.

A future version could try to implement a re-ordering algorithm based
on that, similar to what rtpjitterbuffer does.
2013-04-11 13:11:44 +02:00
Sebastian Dröge
4ca886c53b mpegtsbase: Call ::program_stopped after removing all streams
Subclasses want to access the program while removing the streams
and will currently crash because of dereferencing NULL in some cases.
2013-04-10 16:19:00 +02:00
Edward Hervey
98265d0b28 tsdemux: Add support for TrueHD audio 2013-04-07 18:41:38 +02:00
Edward Hervey
ca3146a2cd tsparse: Ensure segment events are forwarded
We skip them for tsdemux though (recreated later)

Fixes #690949
2013-03-30 13:54:37 +01:00
Douglas Bagnall
0c9db072ce tsdemux: remove unused current_program_number field
https://bugzilla.gnome.org/show_bug.cgi?id=690934
2013-03-24 20:58:28 +00:00
Sebastian Dröge
acacef9fbb mpegtsdemux: Fix various compiler warnings 2013-03-03 12:30:32 +01:00
Josep Torra
7fafbe2e22 tsdemux: expose VC1 streams with missing descriptor.
Fixes playback of VC1 streams when the descriptor is missing.
2013-02-05 23:07:12 +01:00
David Schleef
a19c0b5697 tsdemux: Add descriptors for SMPTE 302m audio 2013-02-04 18:07:17 -08:00
Matthias Hardt
0e3fdb1e16 tsdemux: extract ISO 639 language codes for subtitles into taglists
https://bugzilla.gnome.org/show_bug.cgi?id=680200
2012-12-28 23:32:55 +00:00
Josep Torra
3d012665f0 tsdemux: forward upstream time segments after flushes
Also reset segment info and drop the segment event when demuxer is
flushed.
Restore demuxer segment with the info stored in base when demuxer is
going to push data again if needed.
Drop code to recover the segment info from base in the initial program
becauses it's superseded by the new code.
2012-11-14 22:51:35 +01:00
Josep Torra
0b3e0ed080 tsdemux: reset the stream some more in the flushes
Now that we handle flushing in the FLUSH_STOP event we need to make
the streams ready if they were flushing.
2012-11-12 22:57:19 +01:00
Josep Torra
150376efe4 mpegtspacketizer: flush observations too
Flush the previous observations when the packetizer is flushed.
Also don't leak them in the dispose.
2012-11-12 22:57:19 +01:00
Josep Torra
1fc5fffe08 mpegtsbase: fix double unref of seek event 2012-11-12 22:57:19 +01:00
Josep Torra
cc40d49bed mpegtsbase: flush in FLUSH_STOP to avoid race conditions
Ensure the chain is not running before reset the state to avoid race
conditions and random corruptions downstream.
Also fixes segfaults in the packetizer due wrong available values that
causes gst_adapter_map to return a NULL pointer.
2012-11-12 22:57:19 +01:00
Josep Torra
996da425a9 Revert "tspacketizer: ensure that a null pointer isn't accessed"
This reverts commit 6efd611b8c.

Also this extra check won't be needed if it's fixed the race by moving
flush actions to FLUSH_STOP.
2012-11-10 19:52:46 +01:00
Josep Torra
80dd130fb0 Revert "tsbase: add a guard with an atomic boolean when flushing"
This reverts commit e14e310f71.

Would be better move the packetizer flushing to FLUSH_STOP and avoid
the race that way. Without introducing a memory barrier that could
have impact in the performance.
2012-11-10 19:46:40 +01:00
Josep Torra
e14e310f71 tsbase: add a guard with an atomic boolean when flushing 2012-11-10 00:08:35 +01:00
Josep Torra
6efd611b8c tspacketizer: ensure that a null pointer isn't accessed
Mitigates segfault due race condition in FLUSH_START handling and
mpegts_base_chain.
2012-11-09 22:17:11 +01:00
Edward Hervey
651203de07 mpegts: Only use timestamp-based PCR/PTS estimation when needed
When dealing with non-time based push-mode streams, we need to revert
to using the offset-based PCR/PTS estimation logic of packetizer.

This solves uses cases such as:
 pushfile:// ! tsdemux
 src ! queue ! tsdemux

https://bugzilla.gnome.org/show_bug.cgi?id=687178
2012-11-09 12:15:24 +01:00
Tim-Philipp Müller
9e1b75fda3 Fix FSF address
https://bugzilla.gnome.org/show_bug.cgi?id=687520
2012-11-04 00:09:59 +00:00
Sebastian Pölsterl
43938bbf54 tsdemux: Fix name of CAT GstStructure
The structure previously was assigned the name "pat".

https://bugzilla.gnome.org/show_bug.cgi?id=686948
2012-10-29 13:16:46 +01:00
Tim-Philipp Müller
465374f3c8 tsdemux: fix program packet sequence counter parsing in PES header 2012-10-19 01:05:44 +01:00
Tim-Philipp Müller
10c881b107 tsdemux: fix some inconsequential PES header parsing issues
additional_copy_info: need to get rid of the highest
bit, not the lowest one

program_packet_sequence_counter: also need to get rid
of the highest bit instead of multiplying with a random
value

original_stuff_length: want to AND 0x3f to extract the
lowest 6 bits, not multiply by it.

None of these fields are actually used though, so these
should not have caused any issues.
2012-10-19 01:05:34 +01:00
Raimo Järvi
9640669689 tsdemux: Fix parsing P-STD_buffer in PES header
https://bugzilla.gnome.org/show_bug.cgi?id=686294
2012-10-19 00:29:40 +01:00
Andoni Morales Alastruey
f768dfd925 tsdemux: fix potential crash dereferencing NULL program pointer
https://bugzilla.gnome.org/show_bug.cgi?id=686358
2012-10-18 17:54:41 +01:00
Tim-Philipp Müller
32ba17cd0f Use gst_element_class_set_static_metadata()
where possible. Avoids some string copies. Also re-indent
some stuff. Also some indent fixes here and there.
2012-10-17 17:46:34 +01:00
Sebastian Dröge
e5eceaaa73 mpegtsdemux: First push EOS, then destroy all programs
And also properly remove the program from the subclass
2012-10-12 15:38:44 +02:00
Mark Nauwelaerts
578861abea replace gst_element_class_set_details_simple with gst_element_class_set_metadata 2012-09-14 17:27:49 +02:00
Mark Nauwelaerts
b807753453 ext, gst: only activate in pull mode if upstream is seekable 2012-09-11 17:47:33 +02:00
Tim-Philipp Müller
2483c82bd7 video/x-dvd-subpicture -> subpicture/x-dvd 2012-08-20 23:37:00 +01:00
Edward Hervey
105737db54 mpegtspacketizer: Fix flushing/sync handling
There was a stray adapter_flush() now that we used a temporary buffer
2012-08-14 19:07:58 +02:00
Edward Hervey
121aa3ad13 mpegtspacketizer: Better detect PCR resets
Assume that any differences in PCR greater than 15s means there is
a reset in the stream.
2012-08-14 19:07:51 +02:00
Edward Hervey
3153965658 mpegtspacketizer: Remove/demote some debugging 2012-08-14 19:07:39 +02:00
Edward Hervey
9abedc97ff tsdemux: Always use current PTS/DTS
This avoids setting old PTS and/or DTS
2012-08-14 19:07:33 +02:00
Edward Hervey
e25c2e8e74 mpegtspacketizer: Remove unneeded memset(0) 2012-08-14 19:07:28 +02:00
Edward Hervey
8b80114101 mpegts: Use G_GNUC_INTERNAL 2012-08-14 19:07:24 +02:00
Edward Hervey
4d4d2f6eb0 mpegtspacketizer: Use gst_structure_*_take_value where applicable
Saves copying/freeing data
2012-08-14 19:06:16 +02:00
Edward Hervey
5de6fd1ff8 mpegtspacketizer: Cache the GIConv
Avoids having to constantly open/free them (which will end up being
very often with EIT/NIT).
2012-08-14 19:06:11 +02:00
Edward Hervey
e3c0bbe5f6 mpegtbase: reset element in READY=>PAUSED
Ensures all subclass reset vmethods are called
2012-08-14 19:06:04 +02:00
Edward Hervey
b1295aef14 mpegtspacketizer: Use more Quarks 2012-08-14 19:05:58 +02:00
Edward Hervey
d54624aa49 tsdemux: Remove useless code
PCR/OPCR is meant to be handled by the packetizer
2012-08-14 19:05:52 +02:00
Edward Hervey
4f55cc12ae tsdemux: Calculate pcr/time/offset separately per program
Avoids quite a few issues with multi-program streams
2012-08-14 19:05:48 +02:00
Edward Hervey
a8d1e88bda tsparse: Push out buffer on main source pad 2012-08-14 19:05:44 +02:00
Edward Hervey
558beab1b4 mpegtbase: vmethod to notify when we're done processing input
This can be used to notify subclasses no more data is expected this
round.
tsparse will use it to push whole buffers (without copy) on the main
source pad.
It could also be used later to decide whether to push pending data
in order to reduce latency.
2012-08-14 19:05:37 +02:00
Sebastian Dröge
bdc46898de gst: Add stream-id to stream-start events 2012-08-06 14:05:08 +02:00
Tim-Philipp Müller
489b102a43 gst_tag_list_free -> gst_tag_list_unref 2012-08-04 16:31:30 +01:00
Sebastian Dröge
afd50a79f4 tag: Update for taglist/tag event API changes 2012-07-28 00:32:58 +02:00
Mark Nauwelaerts
76aedf5641 tsdemux: more correctly determine expected PES packet payload size
... particularly considering that packet_length == 0 is possible.
2012-07-12 10:17:57 +02:00
Mark Nauwelaerts
006fe188e7 tsdemux: correctly determine expected PES packet payload size
Avoids consistently failing to detect that a packet is complete, which
would then only be pushed upon the start of a next packet, which leads
to quite a delay in case of a sparse (subtitle) stream.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=666674
2012-07-11 20:43:46 +02:00
Edward Hervey
d3271381ee mpegtsbase: Move known PSI PIDs to where they belong
This avoids tsdemux parsing data is doesn't really care about

Conflicts:

	gst/mpegtsdemux/mpegtsparse.c
2012-06-29 10:02:30 +02:00
Edward Hervey
ada9990092 mpegtbase: Add more known default SI PIDs 2012-06-29 09:59:13 +02:00
Edward Hervey
b5967d2323 tsdemux: Fix AAC LATM caps 2012-06-29 09:23:32 +02:00
Tony Houghton
a996d2f01a Correct satellite delivery descriptor parsing.
Original code to parse satellite delivery descriptors to generate
"satellite" structures appeared to be copy & pasted from cable's code
without amending for satellite.

Also added 8PSK to dvbsrc's enum for modulation.

https://bugzilla.gnome.org/show_bug.cgi?id=654485

Conflicts:

	gst/mpegdemux/gstmpegdesc.h
	gst/mpegdemux/mpegtspacketizer.c
2012-06-21 11:37:21 +01:00
Edward Hervey
b8f32811ca tsparse: Rework handling and cleanups
tspad always has a static source pad which output everything received
(not functional yet).

Program pads are now request pads.

Remove all cruft that should have been removed from the switch over
to mpegtsbase.

Conflicts:

	gst/mpegtsdemux/mpegtsparse.c
2012-06-21 11:34:28 +01:00
Edward Hervey
a8dd05742a mpegtbase: Always send EOS
subclass will take care of handling it more if needed
2012-06-21 11:25:17 +01:00
Wim Taymans
dbed726057 update for task api change 2012-06-20 10:40:42 +02:00
Edward Hervey
a931620208 mpegtspacketizer: Don't use GByteArray
Using a simple array comes to the same result for a fraction of the cost
2012-06-19 10:49:45 +01:00
Edward Hervey
8fd2d43d60 mpegtbase: Avoid copying GstStructure 2012-06-19 10:49:37 +01:00
Edward Hervey
94c68115ef mpegdesc: Don't allocate/free GstMPEGDescriptor
Just use static variables
2012-06-19 10:49:26 +01:00
Wim Taymans
b98ec32380 update for tag event change 2012-06-06 13:02:40 +02:00
Edward Hervey
e2576f0e86 mpegtsdemux: Also parse TOT (Time Offset Section)
It's the same as TDT, except with descriptors at the end
2012-06-05 10:54:27 +02:00
Edward Hervey
d9121c38ea mpegtsdemux: FIXME/Comment about issues/errors 2012-06-05 10:54:26 +02:00
Edward Hervey
9e117b83fc mpegtspacketizer: Fix leak 2012-06-05 10:54:26 +02:00
Edward Hervey
5f7ecaa0f1 mpegtspacketizer: Reduce usage of GstAdapter
Peek as much as possible in one go. Ideally we should remove usage of
adapter altogether, but for the time being it provides a big enough
speedup (around 2 times faster per packet processed).
2012-06-05 10:54:26 +02:00
Edward Hervey
f0867c7247 mpegtspacketizer: Avoid alloc/free where possible
Helps for streams with a lot of sections, like EIT
2012-06-05 10:54:26 +02:00
Edward Hervey
aab8c46f10 mpegtbase: Add more sections that don't have a CRC 2012-06-05 10:54:26 +02:00
Edward Hervey
25f6c78d79 mpegdefs: Add list of known table_id
Along with the specifications from which they come. Avoids having
to search for which spec a table_id belongs to
2012-06-05 10:54:26 +02:00
Edward Hervey
0e86e68c6a mpegtspacketizer: Clarify debug statements
Use hex values in more cases (since that's how PID/table_id/... are
represented in the various specs).
2012-06-05 10:54:26 +02:00
Edward Hervey
63f8b970af mpegtsbase/packetizer: Add CAT section handling
Allows reporting the global EMM
2012-06-05 10:54:25 +02:00
Edward Hervey
dfe6863387 mpegtbase: Add more debug in PSI handling
Allows us to identify which SI we don't handle
2012-06-05 10:47:49 +02:00
Edward Hervey
d47d1713d9 mpegtbase: Add more default known PSI table_id 2012-06-05 10:47:49 +02:00
Edward Hervey
9924c178c8 mpegtbase: Refactor PSI detection 2012-06-05 10:47:49 +02:00
Edward Hervey
9f7e70f754 mpegtbase: ECM/CA sections don't have a CRC
So don't check for it :)

Also add a bit more info in the warning message to speed up detecting
whether it's a false-positive or not.
2012-06-01 16:42:41 +02:00
Edward Hervey
8b2f229553 mpegdesc: Add more comments/info
Namely where they belong to
2012-05-26 15:54:51 +02:00
Edward Hervey
8aa64c5d7d tsdemux: Make sure we have a language code before using it 2012-05-26 15:54:48 +02:00
Edward Hervey
7784c0d350 mpegtsbase: Check before getting descriptors from structure
Avoids spurious warnings. Not having those descriptors is nothing
fatal, so check their presence before trying to get them.
2012-05-26 15:54:44 +02:00
Edward Hervey
b6732a27d3 pesparse: Be a bit more permissive with PTS/DTS parsing
According to the specifications a PTS_DTS_flags value of 0x01 is forbidden.
... but there are some rare files out there that do that.

Instead of erroring out, let's warn, carry on parsing accordingly.

If the packet is really corrupted there are enough checks afterward to
detect that.
2012-05-26 15:54:41 +02:00
Edward Hervey
12f24874aa mpegtsbase: Fix bit operation
"a % 8" corresponds to "a & 0x7" (and not 0xf).

spotted by Julian Scheel
2012-05-25 14:16:59 +02:00
Edward Hervey
a633347ed1 mpegtsbase: Speed up _is_psi()
By making it inline and simplifying the bit macros
2012-05-23 09:37:49 +02:00
Julian Scheel
a0a184931a tsdemux: Add language code to taglist.
Read the language codes for tracks from the mpegts descriptors and add it into
the pads taglist.

https://bugzilla.gnome.org/show_bug.cgi?id=673896
2012-05-22 18:13:30 +02:00
Edward Hervey
6bf54ff850 tsdemux: Adapt to new packetizer API
We no longer use GstBufferList and instead copy the incoming data
into newly allocated memory.

This makes tsdemux behaviour 3 to 4 times faster.
2012-05-22 17:43:38 +02:00
Edward Hervey
7fdf1cb0c8 tsparse: Adapt to new packetizer API 2012-05-22 17:43:38 +02:00
Edward Hervey
3c73d29162 mpegtsbase: Adapt to new packetizer behaviour 2012-05-22 17:43:38 +02:00
Edward Hervey
c6035d403c mpegtspacketizer: Avoid usage of GstBuffer internally
The overhead of creating/using 188 byte GstBuffer from GstAdapter
is too expensive.
We now peek the next packet, and provide a data/size which is only
valid until the packetizerpacket is cleared.

In addition, cleanup all the internal code to deal with that new
behaviour and remove double-checks which are no longer needed.

The section_length is now the corrected section_length (i.e. with
the additional 3 bytes).

Avoid using gst_adapter_prev_timestamp and instead track
the timestamp ourself.
2012-05-22 17:43:38 +02:00
Edward Hervey
6d01f5f1b3 mpegtspacketizer: Detect PCR wraparound in skew code
If the received PCR is going backwards (by a safe margin), include
that wraparound for further calculation.

https://bugzilla.gnome.org/show_bug.cgi?id=674536
2012-05-22 16:51:25 +02:00
Julian Scheel
5536bcf8b8 tsdemux: flush on pusi only for payload packets
Data should not be flushed out of the tsdemux because a payload unit start
indicator (pusi) is seen in a adaptation only ts packet. If the package contains no
payload a pusi does not indicate a new PES packet, but PSI information, etc.
This fixes playback of several TS files which contain ts packets without
payload but with pusi set to 1.

https://bugzilla.gnome.org/show_bug.cgi?id=676168
2012-05-18 11:12:20 +02:00
Edward Hervey
e75612c3fd tsdemux: Don't queue data for streams that don't have a pad
This would result in an error further down, and it also avoids processing
for that data which we wouldn't be using anyway.
2012-05-18 11:11:37 +02:00
Edward Hervey
8a4fd8358d tsdemux: Detect and handle scrambled packets
Users (tsdemux/mpegtsparse) can decide what to do with that
2012-05-18 11:11:31 +02:00
Edward Hervey
fa4b92e743 tsdemux: Emit no-more-pads when all pads are activated
Fixes #670921 again
2012-05-18 11:11:25 +02:00
Albert Astrals Cid
dda551e723 mpegts: support items in extended event descriptor
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=672478
2012-05-14 11:51:15 +02:00
Raimo Järvi
93ad7a4d06 Fix printf format compiler warnings on mingw-w64
https://bugzilla.gnome.org/show_bug.cgi?id=675520
2012-05-05 19:45:42 +01:00
Wim Taymans
7394deef33 tsbase: unref bad packets too
Conflicts:

	gst/mpegtsdemux/mpegtsbase.c
2012-05-01 11:50:39 +02:00
Wim Taymans
b56ab4b3cf tsdemux: reset the state of the stream when flushing
We need to reset the stream on a flush or else old packets could be added to the
list and leak.
2012-05-01 11:47:52 +02:00
Wim Taymans
eaf4d97815 mpegtsbase: don't push events upstream in pull mode
In pull mode, don't push the seek event upstream.
2012-05-01 11:43:07 +02:00
Wim Taymans
6bf0ebdcd8 mpegts: don't poke into private adapter fields 2012-05-01 09:41:18 +02:00
Wim Taymans
8da3c2a969 mpegtsdemux: we ignore warnings differently
We suppress the warnings in the .c file instead.
2012-04-20 11:25:31 +02:00
Gil Pedersen
fcd8155d87 mpegtsdemux: port to 0.11
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=674397
2012-04-20 11:25:31 +02:00
Wim Taymans
5bd76c7c97 mpegtsbase: clarify event ownership 2012-04-20 11:25:31 +02:00