We need the streams' pt maps updated before requesting pads
on rtpbin, because this is what will trigger the requesting
of FEC encoders, and our handler for this request looks for
the payload types in the relevant stream's pt map.
Fixes#1187
Otherwise we would start sending data to the DTLS connection before, and
the DTLS elements consider this an error.
Also RFC 8261 mentions:
o A DTLS connection MUST be established before an SCTP association can
be set up.
For us it can happen that the DTLS transports are still in the process
of connecting while the ICE transport is already completed. This
situation is not specified in the spec but conceptually that means it is
still in the process of connecting.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/758
Previously we simply logged errors but never reported them to elements
or even to the user. Fatal errors are now properly reported.
Additionally proper connection closing is implemented based on EOS:
- dtlsenc: EOS will cause close_notify to be sent to the peer and only
if the peer also sent back close_notify we will forward the
EOS event.
- dtlsdec: EOS will be forwarded normally, this only means that the
unterlying transport was closed. On receiving a DTLS packet
containing close_notify, return EOS and send EOS downstream.
We don't have any mid before parsing the SDP, which happens after we
handled the SDP answer and that usually happens long after ICE candidate
gathering is finished.
Without this all transceivers are considered inactive and as such ICE
gathering is for active transceiver was considered complete from the
very beginning.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1126
We don't support stopping RTP receivers currently so let's not consider
them all stopped all the time. This fixes some of the ICE/DTLS state
change handling and specifically fixes the ICE gathering state.
Previously the ICE gathering state was immediately going from NEW to
COMPLETE because it considered all transceivers stopped and as such all
activate transceivers were finished gathering ICE candidates.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1126
xdg_shell fullscreen mode doesn't work for committing
xdg_surface without configure acknowledgement.
In addition, we can't set different surface setting from
acknowledged config in this mode.
AES128 support was added since nettle version 3.0
../subprojects/gst-plugins-bad/ext/hls/gsthlsdemux.h:110:10: error: field ‘ctx’ has incomplete type
struct CBC_CTX (struct aes128_ctx, AES_BLOCK_SIZE) aes_ctx;
Add static or dynamic mpd with:
- baseURL
- period
- adaptation_set
- representaton
- SegmentList
- SegmentURL
- SegmentTemplate
Support multiple audio and video streams.
Pass conformance test with DashIF.org
Instead of always going through the file system API we allow the
application to modify the behaviour. For the playlist itself and
fragments, the application can provide a GOutputStream. In addition the
sink notifies the application whenever a fragment can be deleted.
The SVT-HEVC (Scalable Video Technology[0] for HEVC) Encoder is an
open source video coding technology[1] that is highly optimized for
Intel Xeon Scalable processors and Intel Xeon D processors.
[0] https://01.org/svt
[1] https://github.com/OpenVisualCloud/SVT-HEVC
It cleans up videoFormat by combining the wl_shm_formats and
drm_formats into a single table that represents the same format.
In addition, it adds NV61 format to the waylandsink.
commit 6adfb120ab added this flag to fix
builds with `-Werror`, and afterwards it was changed to use a version
check when newer versions of openexr moved over to C++11.
However, some distros have backported patches to older openexr
versions which make it require C++11, which makes the version check
incorrect and causes an error because we passed `-Werror -std=c++98`.
Instead, directly check when usage of the header requires `-std=c++98`
with `-Werror` and override the `cpp_std` setting on the target.
Fixes https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/issues/1117
Includes a new GstVulkanHandlePool base class for pooling different
resources togther. The descriptor cache object is ported to
GstVulkanHandlePool with the exact same functionality.
A new GstVulkanFenceCache is also implemented for caching fences
which is used internally by GstVulkanDevice for creating or reusing
fences.
The existing GstVulkanTrashFenceList object now caches trash objects.
Part 1 is a base class (vkvideofilter) that handles instance, device,
queue retrieval and holding that has been moved to the library
Part 2 is a fullscreenrenderquad that is still in the plugin that
performs all of the previous vulkan-specific functionality.
Based on Stream ID, the application can accept or reject the connection,
select the desired data stream, or set an appropriate passphrase for the
connection. Example usage:
srt://127.0.0.1:1234?streamid=mystream
Current code would change any non-ok return from gst_pad_push to
GST_FLOW_ERROR, thus hiding meaningful returns such as GST_FLOW_EOS.
Tests also added.
Most of avtpcvfdepay messages are currently logged as warnings, which can
make some scenarios - such as receiving two AVTP streams on the same
pipeline - too verbose.
This patch tones those message down to INFO or DEBUG level - more in
sync with avtpaafdepay logging.
To allow curlhttpsrc to support DASH streams that use the on-demand
profile, it needs to support HTTP Range GETs. In GStreamer, the RANGE
is specified by issuing a GST_FORMAT_BYTES seek to set the start and
end of the range. curlhttpsrc needs to implement seek and set the
appropriate curl options to make it add the Range header to the
request.
The major functionality gain this provides is proper reference counting
for a descriptor set. Overall this allows us to create descriptor sets
when they are needed (or reused from a cache) without violating any of
vulkan's object synchronisation requirements.
As there are a fixed number of sets available in a pool, the number of
descriptors in elements is currently hardcoded to 32. This can be extended
in a future change to create pools on the fly if that limit is ever overrun.
Allows a cleaner control flow when there is no fence available for use
with the trash list. An always signalled fence type will always return
TRUE for gst_vulkan_fence_is_signalled.
The following build error occurs:
vkdeviceprovider.h:30:10: fatal error: gst/vulkan/vulkan.h: No such file or directory
#include <gst/vulkan/vulkan.h>
^~~~~~~~~~~~~~~~~~~~~
By passing NULL to `g_signal_new` instead of a marshaller, GLib will
actually internally optimize the signal (if the marshaller is available
in GLib itself) by also setting the valist marshaller. This makes the
signal emission a bit more performant than the regular marshalling,
which still needs to box into `GValue` and call libffi in case of a
generic marshaller.
Note that for custom marshallers, one would use
`g_signal_set_va_marshaller()` with the valist marshaller instead.
It provides to set tile-columns and tile-rows configurations. The av1
codec allows an input image frame be partitioned into separate vertical
or horizontal tile which can be encoded or decoded independently. It
helps to encode/decode parallel.
CURLOPT_DEBUGFUNCTION option replaces the standard debug function
used when CURLOPT_VERBOSE is in effect. This callback receives various debug information.
And only update the caps and stream-start event accordingly. This
ensures that we'll always forward sticky events that arrive after the
caption pad was created, and especially updates to existing sticky
events like the segment event.
Also create a proper stream id based on the upstream stream id for the
stream-start event, and make sure that all the sticky events we know are
already on the caption pad at the time it is added to the element.
clamp-to-border will return the border color which is typically black,
white or transparent. When linear filtering the edge pixels will
typeically be combined with the border color which is not typically what
we want. Especially when color converting, this removes a green box
around the edge when converting YUV->RGB.
This fixes a regression from commit "srtp: Support libsrtp2"
e9aa117200 where an internal
set of ssrc(s) was added because the libsrtp v2 keeps its
internal streams as private. But the change prevented that
ssrc(s) that not in the caps from being added to the stats.
This patch ensures that all ssrc(s) are inserted to this set
instead of only inserting those from the caps.
If the mutex is locked while running frameComplete there is a potential deadlock
bound to happen when we get a new exported images from the backend.
Fixes#1101
hlssink2 defined "max-files" property to decide the maximum number
of fragments which should be stored in disk. But we've not used
the property. Instead, the size has been maintained by "playlist-length".
Since "max-files" and "playlist-length" have different meaning,
the decision should be done by "max-files" property.
For example, an user might want expose only 3 fragments via playlist
but might want to keep more files than 3 in disk.
A classic case of not updating the next item to iterate after deleting
it from the singly linked list.
Only ever hit with a text buffer with GST_CLOCK_TIME_NONE for either the
timestamp or duration.
hlssink* elements could be finalized without EOS event, and in that case
the final playlist might not include the EXT-X-ENDLIST tag.
Since missing ENDLIST tag means it's live stream, but we did't intend it,
hlssink* elements should put the tag at the end.
In Debian, soundfonts in SF3 format (i.e. the same as SF2 format but
with Ogg/Vorbis-compressed samples) are installed into
/usr/share/sounds/sf3. Soundfonts in SF3 format are supported since
FluidSynth 1.1.7 (released in Feb 2018).
