This mirrors the behaviour in vp8enc / vp9enc and is generally more
useful than using any framerate from the caps as it provides some degree
of accuracy if the stream doesn't have timestamps perfectly according to
the framerate.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6891>
The encoder can specify the a preferred_output_delay value to get better throughput
performance. The higher delay may get better HW performance, but it may increases
the encoder and pipeline latency.
When the output queue length is smaller than preferred_output_delay, the encoder
will not block to waiting for the encoding output. It will continue to prepare and
send more commands to GPU, which may improve the encoder throughput performance.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/4359>
If the muxer times out because of the latency deadline it can happen
that some pads have no caps yet. In that case skip creation of streams
for these pads and create updated section tables once the first buffer
arrives later.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6823>
This makes sure that for sparse streams (KLV, DVB subtitles, ...) the
muxer does not wait until the next buffer is available for them but
times out on the latency deadline and outputs data.
For non-live pipelines it will still be necessary for upstream to
correctly produce gap events for sparse streams.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6823>
The FORCE_KEYFRAME frame which has GST_VIDEO_CODEC_FRAME_FLAG_FORCE_KEYFRAME
bit set should be the sync point. So we should let it be an IDR frame to begin
a new GOP, rather than just promote it to an I frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6619>
The FORCE_KEYFRAME frame which has GST_VIDEO_CODEC_FRAME_FLAG_FORCE_KEYFRAME
bit set should be the sync point. So we should let it be an IDR frame to begin
a new GOP, rather than just promote it to an I frame.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6619>
Set the P and B frame qp to I frame value to avoid generating delta
QP between different frame types. For ICQ and QVBR modes, we can
only set the qpi value, so the qpp and qpb values should be set to
the same value as the qpi.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6841>
Address below message reported by SDK debug layer.
ID3D12Device::CheckFeatureSupport: Unsupported Decode Profile Specified.
Use ID3D12VideoDevice::CheckFeatureSupport with D3D12_FEATURE_VIDEO_DECODE_PROFILES
to retrieve a list of supported profiles
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6839>
Certain V4L2 fourccs don't (yet) have DRM counter parts, in which case
we can't create DMA_DRM caps for them. This is usually the case for
specific tilings, which are represented as modifiers for DMA formats.
While using these tilings is generally preferable - because of e.g.
lower memory usage - it can result in additional conversion steps when
interacting with DMA based APIs such as GL, Vulkan or KMS. In such cases
using a DMA compatible format usually ends up being the better option.
Before the addition of DMA_DRM caps, this was what playbin3 ended up
requesting in various cases - e.g. prefering NV12 over NV12_4L4 - but
the addition of DMA_DRM caps seems to confuse the selection logic.
As a simple and quite robust solution, assume that peers supporting
DMA_DRM caps always prefer these and reorder the caps accordingly.
In the future we plan to have a translation layer for cases where
there is a matching fourcc+modifier pair for a V4L2 fourcc, ensuring
optimal results.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6645>
Doing it in gst_play_new() means that bindings that directly call
g_object_new() with the GType wouldn't end up initializing both.
This affects at least the Python and GJS bindings.
gst_init() is nonetheless only called from gst_play_new() once because
calling it from class_init would likely lead to problems as that's
called from somewhere in the middle of GObject.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6801>
Don't add an extra ref if non-floating as that ref will never be
unreffed.
gst_bin_add() is transfer floating (alias to transfer none).
Fixes a leak when a non-floating ref was provided as a return value in
the request-aux-sender signal.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6807>
Use of VK_PIPELINE_STAGE_2_ALL_COMMANDS_BIT instead of
specific VK_PIPELINE_STAGE_2_VIDEO_DECODE_BIT_KHR
Fix for VUID-vkCmdPipelineBarrier2-srcStageMask-03849
pDependencyInfo->pImageMemoryBarriers[0].srcStageMask
(VK_PIPELINE_STAGE_2_VIDEO_DECODE_BIT_KHR) is not compatible with
the queue family properties
(VK_QUEUE_GRAPHICS_BIT|VK_QUEUE_COMPUTE_BIT|VK_QUEUE_TRANSFER_BIT|
VK_QUEUE_SPARSE_BINDING_BIT|VK_QUEUE_PROTECTED_BIT) of this
command buffer. The Vulkan spec states: The srcStageMask member
of any element of the pMemoryBarriers, pBufferMemoryBarriers, or
pImageMemoryBarriers members of pDependencyInfo must only
include pipeline stages valid for the queue family that was
used to create the command pool that commandBuffer was allocated
from (
https://www.khronos.org/registry/vulkan/specs/1.3-extensions/
html/vkspec.html#VUID-vkCmdPipelineBarrier2-srcStageMask-03849)
The frame barrier should use a compatible srcStageMask for all
the queues.
Remove reset_pipeline_stage_mask as it is redundant
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6780>
Add pitch tests with different forward and backward playback rates.
Those tests depend on the libSoundTouch version to validate the buffers
checksums. The actual version uses libSoundTouch 2.3.2, use the
`--force-fallback-for=soundtouch` meson option to build using the same
version.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
- fully protect accesses to the libsoundtouch API that is not
thread-safe.
- fully protect accesses to GstPitch members that could be read by a
downstream query thread while written by an upstream streaming thread
or a user thread.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
- use the `GST_PITCH_GET_PRIVATE` accessor when needed
- rename `out_seg_rate` to `output_rate` to use the same name as the parameter
- rename `seg_arate` to `segment_applied_rate` to improve readability
- apply gst-indent to gstpitch.hh/cc
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
When changing playing rate, the output segment was not correctly
calculated because the stream time ratio was computed using the previous
input segment rate instead of using the actual rate. This was producing
wrong results for the output segment start and end values.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6247>
The h26xdecoder 'stop' method was not called
as the vulkan h26x class rewires the video decoder
'stop' base method to its own one.
It was causing some memory leaks such as dangling parser
and dpb in h26xdecoder base class.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6782>
1. The PTS of all frames should not be changed.
2. Just update the DTS based on the PTS. For the frame which is not
reordered, the DTS is equal to PTS. For frame which is reordered,
the DTS is equal to previous DTS. For example:
Input: F0[D0, P0] -- F1[D1, P1] -- F2[D2, P2] -- F3[D3, P3]
Output: F0[I, D0, P0] -- F3[P, D0, P3] -- F1[B, D1, P1] -- F2[B, D2, P2]
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6703>
1. The PTS of all frames should not be changed.
2. Just update the DTS based on the PTS. For the frame which is not
reordered, the DTS is equal to PTS. For frame which is reordered,
the DTS is equal to previous DTS. For example:
Input: F0[D0, P0] -- F1[D1, P1] -- F2[D2, P2] -- F3[D3, P3]
Output: F0[I, D0, P0] -- F3[P, D0, P3] -- F1[B, D1, P1] -- F2[B, D2, P2]
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6703>
Fixing deadlock in below case
* GC lock is taken by background thread, and the background thread calls
gst_d3d12_ipc_client_release_imported_data() which takes ipc lock
* ipc lock is already taken in ipc thread and trying to pushing GC data
via gst_d3d12_command_queue_set_notify()
* gst_d3d12_command_queue_set_notify() is trying to take GC lock
but it's already taken by background thread
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6749>
Ideally, GPU waiting should be scheduled just before executing command list.
But handling the case outside of converter is a bit complicated.
Under an assumption that constructed command list will be executed
immediately, schedules GPU-side waiting inside of conversion method
to simplify the flow.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/6749>
