Introduce GstVaapiContextUsage so that to explicitly determine the
usage of a VA context. This is useful in view to simplifying the
creation of VA context for VPP too.
Improve documentation and debug messages. Clean-up APIs, i.e. strip
them down to the minimal set of interfaces. They are private, so no
need expose getters for instance.
Set a valid GstVideoCodecFrame.system_frame_number when decoding a
stream in standalone mode. While we are at it, improve the debugging
messages to also include that frame number.
When decoding failed, or that the frame was dropped, the associated
surface proxy is not guaranteed to be present. Thus, the GST_DEBUG()
message needs to check whether the proxy is actually present or not.
https://bugzilla.gnome.org/show_bug.cgi?id=722403
[fixed gst_vaapi_surface_proxy_get_surface_id() to return VA_INVALID_ID]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix formts for various GST_DEBUG et al. invocations. More precisely,
make size_t arguments use the %zu format specifier accordingly; force
XID formats to be a 32-bit unsigned integer; and fix the format used
for gst_vaapi_create_surface_with_format() error cases since we have
been using strings nowadays.
Split the input buffer data into decoder units that represent a JPEG
segment. Handle scan decoder unit specifically so that it can include
both the scan header (SOS) but also any other ECS or RSTi segment.
That way, we parse the input buffer stream only once at the gst-vaapi
level instead of (i) in gst_vaapi_decoder_jpeg_parse() to split the
stream into frames SOI .. EOI and (ii) in decode_buffer() to further
determine segment boundaries and decode them.
In practice, this is a +15 to +25% performance improvement.
Drop obsolete GST_VAAPI_IS_xxx() helper macros since we are no longer
deriving from GObject and so those were only checking for whether the
argument was NULL or not. This is now irrelevant, and even confusing
to some extent, because we no longer have type checking.
Note: this incurs more type checking (review) but the libgstvaapi is
rather small, so this is manageable.
Port GstVaapiDecoder and GstVaapiDecoder{MPEG2,MPEG4,JPEG,H264,VC1} to
GstVaapiMiniObject. Add gst_vaapi_decoder_set_codec_state_changed_func()
helper function to let the user add a callback to a function triggered
whenever the codec state (e.g. caps) changes.
Propagate the picture size from the bitstream to the GstVaapiDecoder,
and subsequent user who installed a signal on notify::caps. This fixes
decoding of TS streams when the demuxer failed to extract the required
information.
Add gst_vaapi_decoder_get_frame_with_timeout() helper function that will
wait for a frame to be decoded, until the specified timeout in microseconds,
prior to returning to the caller.
This is a fix to performance regression from 851cc0, whereby the vaapidecode
loop executed on the srcpad task was called to often, thus starving all CPU
resources.
Fix support for interlaced contents with GStreamer 0.10. In particular,
propagate GstVaapiSurfaceProxy frame flags to GstVideoCodecFrame flags
correctly.
This is a regression from commit 87e5717.
Rename GstVaapiDecoderFrame to GstVaapiParserFrame because this data
structure was only useful to parsing and a proper GstvaapiDecoderFrame
instance will be created instead.
Fix regression from 0.4-branch whereby GstVaapiSurfaceProxy no longer
held any information about the expected presentation timestamp, frame
duration or additional flags like interlaced or top-field-first.
Use new GstVaapiSurfaceProxy internal helper functions to propagate the
necessary GstVideoCodecFrame flags to vaapidecode (GStreamer 0.10).
Also make GstVaapiDecoder push_frame() operate similarly to drop_frame().
i.e. increase the GstVideoCodecFrame reference count in push_frame rather
than gst_vaapi_picture_output().
Fix previous commit whereby gst_vaapi_decoder_get_codec_state() was
supposed to make GstVaapiDecoder own the return GstVideoCodecState
object. Only comment was updated, not the actual code.
Make gst_vaapi_decoder_get_codec_state() return the original codec state,
i.e. make the GstVaapiDecoder object own the return state so that callers
that want an extra reference to it would just gst_video_codec_state_ref()
it before usage. This aligns the behaviour with what we had before with
gst_vaapi_decoder_get_caps().
This is an ABI incompatible change, library major version was bumped from
previous release (0.5.2).
This integrates support for GStreamer API >= 1.0 only in the libgstvaapi
core decoding library. The changes are kept rather minimal here so that
the library retains as little dependency as possible on core GStreamer
functionality.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Now that the surface pool is reference counted in the surface proxy wrapper,
we can safely ignore surface size checks in gst_vaapi_decoder_ensure_context().
Besides, this check is already performed in gst_vaapi_context_reset_full().
Add a new GstVaapiDecoder::decode_codec_data() hook to actually decode
codec-data in the decoder sub-class. Provide a common shared helper
function to do the actual work and delegating further to the sub-class.
Fix gst_vaapi_decoder_get_surface() to only return frames with a valid
surface proxy, i.e. with a valid VA surface. This means that any frame
marked as decode-only is simply skipped.
If the decoder was not able to decode a frame because insufficient
information was available, e.g. missing sequence or picture header,
then allow the frame to be gracefully dropped without generating
any error.
It is also possible that a frame is not meant to be displayed but
only used as a reference, so dropping that frame is also a valid
operation since GstVideoDecoder base class has extra references to
that GstVideoCodecFrame that needs to be released.
Avoid usage of goto. Simplify decode_step() process to first accumulate all
pending buffers into the GstAdapter, and then parse and decode units from
that input adapter. Stop the process once a frame is fully decoded or an
error occurred.
Make sure we always have a free surface left to use for decoding the
current frame. This means that decode_step() has to return once a frame
gets decoded. If the current adapter contains more buffers with valid
frames, they will get parsed and decoded on subsequent iterations.
Optimize pre-allocation of decoder units, thus avoiding un-necessary
memory reallocations. The heuristic used is that we could have around
one slice unit per macroblock line.
Use a GArray to hold decoder units in a frame, instead of a single-linked
list. This makes 'append' calls faster, but not that much. At least, this
makes things clearer.
Allocate decoder unit earlier in the main parse() function and don't
delegate this task to derived classes. The ultimate purpose is to get
rid of dynamic allocation of decoder units.
Create a new VA context if the encoded surface size changes because we
need to keep the underlying surface pool until the last one was released.
Otherwise, either of the following cases could have happened: (i) release
a VA surface to an inexistent pool, or (ii) release VA surface to an
existing surface pool, but with different size.
Theory of operations: all units marked as "slice" are moved to the "units"
list. Since this list only contains slice data units, the prev_slice pointer
was removed. Besides, we now maintain two extra lists of units to be decoded
before or after slice data units.
In particular, all units in the "pre_units" list will be decoded before
GstVaapiDecoder::start_frame() is called and units in the "post_units"
list will be decoded after GstVaapiDecoder::end_frame() is called.
Maintain decoded surfaces as GstVideoCodecFrame objects instead of
GstVaapiSurfaceProxy objects. The latter will tend to be reduced to
the strict minimum: a context and a surface.
Add new gst_vaapi_decoder_get_frame() function meant to be used with
gst_vaapi_decoder_decode(). The purpose is to return the next decoded
frame as a GstVideoCodecFrame and the associated GstVaapiSurfaceProxy
as the user-data object.
Use standard GstVideoCodecState throughout GstVaapiDecoder and expose
it with a new gst_vaapi_decoder_get_codec_state() function. This makes
it possible to drop picture size (width, height) information, framerate
(fps_n, fps_d) information, pixel aspect ratio (par_n, par_d) information,
and interlace mode (is_interlaced field).
This is a new API with backwards compatibility maintained. In particular,
gst_vaapi_decoder_get_caps() is still available.
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Align gst_vaapi_decoder_get_surface() semantics with the rest of the
API. That is, return a GstVaapiDecoderStatus and the decoded surface
as a handle to GstVaapiSurfaceProxy in parameter.
This is an API/ABI change.
Introduce new decoding process whereby a GstVideoCodecFrame is created
first. Next, input stream buffers are accumulated into a GstAdapter,
that is then passed to the _parse() function. The GstVaapiDecoder object
accumulates all parsed units and when a complete frame or field is
detected, that GstVideoCodecFrame is passed to the _decode() function.
Ultimately, the caller receives a GstVaapiSurfaceProxy if decoding
process was successful.
The start_frame() hook is called prior to traversing all decode-units
for decoding. The unit argument represents the first slice in the frame.
Some codecs (e.g. H.264) need to wait for the first slice in order to
determine the actual VA context parameters.
Split decoding process into two steps: (i) parse incoming bitstreams
into simple decoder-units until the frame or field is complete; and
(ii) decode the whole frame or field at once.
This is an ABI change.
GstVaapiSurfaceProxy does not use any particular functionality from
GObject. Actually, it only needs a basic object type with reference
counting.
This is an API and ABI change.
Improve the semantics for gst_vaapi_decoder_put_buffer() when an empty
buffer is passed on. An empty buffer is a buffer with a NULL data pointer
or with a size equals to zero. In this case, that buffer is simply
skipped and the function returns TRUE. A NULL buffer argument still
marks the end-of-stream.
