Matthew Waters
bb84f7357b
glcontext/cocoa: implement empty swap_buffers
...
Fixes some GL tests on OS X.
2016-11-16 17:34:29 +11:00
Thibault Saunier
c38d3a41e2
meson: Build waylandsink
...
https://bugzilla.gnome.org/show_bug.cgi?id=774493
2016-11-15 18:33:25 -03:00
Matthew Waters
9f690fa241
glwindow/cocoa: remove unneeded window code in NSWindow
...
This is all taken care of by GstGLWindowCocoa/GstGLNSView now.
2016-11-16 00:01:00 +11:00
Matthew Waters
23ec5aeb83
glwindow/cocoa: remove our view from the parent when closing
...
Otherwise, when the application reuses the same UIView, we were getting
draw notifications on the previous view/layer's which weren't valid anymore
and were referencing pointers that had been freed.
https://bugzilla.gnome.org/show_bug.cgi?id=753003
2016-11-16 00:00:17 +11:00
Matthew Waters
5602cab04d
gl/caopengllayer: add a debug category
2016-11-15 23:55:00 +11:00
Matthew Waters
f2d09b8cd4
glbufferpool: introduce check for GLMemory allocators
...
The last missing piece of EGLImage support has been pushed.
2016-11-15 23:55:00 +11:00
Scott D Phillips
e4407d4599
Fix some MSVC warnings about const-ness
...
Some miscellaneous warnings about const-ness, either casting away const
where we know it's safe or removing const where it's not correct.
https://bugzilla.gnome.org/show_bug.cgi?id=774293
2016-11-15 14:53:49 +02:00
Scott D Phillips
3c53da5e09
Cast away const from GstMetaInfo in *_get_meta_info() functions
...
MSVC warns about the const in the implicit argument conversion in the
calls to g_once_init_{enter,leave}. It's OK so explicitly cast it.
https://bugzilla.gnome.org/show_bug.cgi?id=774293
2016-11-15 14:53:49 +02:00
Seungha Yang
e2dbc2affa
adaptivedemux: Fix startup SEGMENT seeking and setting for live
...
Because fragment.timestamp is relative value to period_start,
startup SEGMENT seeking should be pointed to "fragment.timestamp + period_start"
https://bugzilla.gnome.org/show_bug.cgi?id=774196
2016-11-15 14:47:46 +02:00
Philippe Renon
5594c7e53e
opencv: move base opencv filter class and utilities to gst-libs
...
https://bugzilla.gnome.org/show_bug.cgi?id=774223
2016-11-14 18:25:57 +00:00
Tim-Philipp Müller
ba6b8c33e0
gl: x11-xcb is not a required dependency
...
Don't fail if it's not found..
2016-11-11 01:06:23 +00:00
Matthew Waters
28396d348f
adaptivedemux: reset the manifest failure count after a successful retrieval
...
This changes the failure case to require a consecutive number of
failures rather than being spread out over the entire stream.
Fixes the case where fetching the manifest was intermittent.
https://bugzilla.gnome.org/show_bug.cgi?id=774177
2016-11-11 00:11:25 +11:00
Matthew Waters
6d50a9e8a8
adaptivedemux: call the subclass for duration queries for live sources
...
Otherwise, the duration query was failing for live sources
https://bugzilla.gnome.org/show_bug.cgi?id=774177
2016-11-11 00:11:25 +11:00
Matthew Waters
fab5aa8b16
adaptivedemux: restart the manifest update task after a seek
...
For formats that need to update the manifest to know about new
fragments as they're being written by the server would never receive an
updated fragment list after a seek event
https://bugzilla.gnome.org/show_bug.cgi?id=774177
2016-11-11 00:11:25 +11:00
Dongil Park
324b3873c8
mpegts: fix typo in GstMpegtsDescriptor
...
https://bugzilla.gnome.org/show_bug.cgi?id=774132
2016-11-10 10:07:59 +00:00
Matthew Waters
3f7b549881
gl/utils: move gen_shader() to the plugin and remove del_shader()
...
gst_gl_context_del_shader() can be replaced by a g_object_unref().
gst_gl_context_gen_shader() should be replaced by using GstGLSLStage.
2016-11-10 20:11:03 +11:00
Matthew Waters
59350d078b
glwindow: remove unused field in public struct
2016-11-10 20:05:45 +11:00
Matthew Waters
01fa90c1e7
glwindow: remove is_running() function
...
It isn't necessary in correctly written programs.
2016-11-10 20:05:45 +11:00
Nirbheek Chauhan
de4552d279
meson/gl: XCB changes also need x11-xcb as a dependency
...
https://ci.gstreamer.net/job/GStreamer-master-meson/380/console
[...]
gst-libs/gst/gl/x11/xcb_event_source.c:98: undefined reference to `xcb_get_file_descriptor'
2016-11-08 17:52:02 +05:30
Philippe Normand
a424f04a22
gl/x11: fix meson build
...
The x11_event_source.[ch] files were renamed in
4f6c226bd2
.
2016-11-08 09:54:15 +01:00
Matthew Waters
f9d463d80e
glwindow: remove the navigation thread
...
This functionality can now effectively be implemented with the display event
thread.
2016-11-08 15:14:27 +11:00
Matthew Waters
4f6c226bd2
gl/x11: use xcb instead of libX11
...
- xcb is supposedly thread-safe!
videotestsrc ! glimagesink now doesn't spuriously result in a
'call XInitThreads()' error however if anybody else is using X11,
then XInitThreads() still needs to be called and multiple glimagesink's
still need XInitThreads().
Everything still takes libX11 handles as they are compatible with the xcb
variants. Unfortunately we cannot move fully over to xcb due to GLX being
entirely based on Xlib. It's also impossible to transform a xcb_connection
to a Display which means we require X11 handles.
2016-11-08 15:14:26 +11:00
Matthew Waters
e4916fb1ef
gldisplay: add a list of glwindow's
...
With the event thread on the display, for a particular winsys event
we need to be able to retreive the window that the event matches.
2016-11-08 15:14:26 +11:00
Matthew Waters
1a6c4be242
gldisplay: add a dedicated event thread
...
Will take the place of the navigation event thread for dealing with
winsys events.
2016-11-08 12:50:45 +11:00
Matthew Waters
92ba1d0df6
gl: don't expose OpenGL prototypes
...
We roll our own to avoid depending a certain OpenGL header version
2016-11-08 12:46:09 +11:00
Matthew Waters
2a440f60e4
gl/cocoa: don't install the gstglcontext_cocoa.h header
...
It's not needed to be exposed
2016-11-08 12:46:09 +11:00
Matthew Waters
7dc7ec94e7
gl/android: don't install the android window header
...
It's not needed
2016-11-08 12:46:09 +11:00
Matthew Waters
86930b6d11
gl: add padding to all exposed winsys/platform-specific structs
2016-11-08 12:46:09 +11:00
Matthew Waters
2209c5d97f
gl/wayland: install the gstgldisplay_wayland.h header
...
As it is used by other OpenGL sinks (gtkglsink, qmlglsink)
2016-11-08 12:45:55 +11:00
Matthew Waters
c6326530cc
gl/egl: don't install the gstglcontext_egl.h header
...
It's not needed to be exposed and there are no users of the API.
2016-11-08 02:44:30 +11:00
Matthew Waters
cafcde5586
glfilter: remove display_init/reset
...
They are mirrors of GstGLBaseFilter's gl_start() and gl_stop() virtual methods
so use them instead.
2016-11-08 02:21:20 +11:00
Matthew Waters
fe64686c8c
gldisplay: Fix inverted precondition
...
A GError argument must either be null or point to a NULL GError.
https://developer.gnome.org/glib/stable/glib-Error-Reporting.html
2016-11-03 18:21:55 +11:00
Matthew Waters
23e147f619
gl/gi: some annotation updates for called functions
...
With scope, closure, destroy annotations
2016-11-03 16:16:12 +11:00
Matthew Waters
61a3c55d55
gl/gi: also include GstVideo
...
Removes all the unknown type GstVideo* warnings while building the GIR
file.
2016-11-03 16:16:12 +11:00
Matthew Waters
19752be030
glfeature: move internal functions into a private header
...
Don't expose them to the outside world
2016-11-03 16:16:12 +11:00
Matthew Waters
41a6448918
gl: GST_GL_TYPE -> GST_TYPE_GL
...
Some deprecated symbols are kept for backwards compatibility
2016-11-03 16:16:12 +11:00
Matthew Waters
0dc003bf30
gl/docs: massive update
...
- add Since: markers where necessary.
- document structs
- add documentation headers for each module (short_description,
see_also, etc)
- reduce the number of warnings gtk-doc outputs
- fix spelling mistakes
2016-11-03 16:16:11 +11:00
Matthew Waters
1296741d3d
gl/docs: document new API added in 1.10
...
GstGLRenderbuffer
GstGLFramebuffer
GstGLQuery
GstEGLImage
GstGLMemoryEGL
2016-11-03 12:08:44 +11:00
Matthew Waters
4b43862cdb
glsl: fix #version 150 not working with profiles
...
The spec allows the core/compatibility profiles to be used
with #version 150.
Also tighten up the tests to check for default profiles being chosen
correctly.
2016-11-03 12:08:44 +11:00
Lyon Wang
8d41d816a2
player: Add configuration for enabling accurate seeks
...
https://bugzilla.gnome.org/show_bug.cgi?id=773521
2016-11-01 19:49:52 +02:00
Sebastian Dröge
8ba57fb4bd
player: Cache duration and return cached duration
...
https://bugzilla.gnome.org/show_bug.cgi?id=771992
2016-11-01 19:36:40 +02:00
Nirbheek Chauhan
f1c9fa28d2
build: Also need to define GST_EXPORTS for Autotools
...
The change to use GST_EXPORT for symbols under Windows requires
GST_EXPORTS for internal use, and that is also needed under Autotools.
The same thing is done for gstreamer-1.0.dll in -core.
2016-10-28 10:01:36 +05:30
Nirbheek Chauhan
7e6764e304
gstgl: Re-enable WINAPI on _MSC_VER
...
The calling convention may be deprecated, but we still need it for
OpenGL. The build issue was caused by an incorrect syntax being used for
the WINAPI (__stdcall) prototype in function pointers which was accepted
by GCC but is rejected by MSVC.
2016-10-28 10:00:59 +05:30
Nirbheek Chauhan
f790863755
Explicitly define float constants as float
...
With MSVC, this gives the following warning:
warning C4305: 'function': truncation from 'double' to 'gfloat'
Apparently, MSVC does not figure out what type to use for constants
based on the assignment. This warning is very spammy, so let's try to
fix it.
2016-10-27 23:06:26 +05:30
Nirbheek Chauhan
83df90ed6c
Fix incorrect return type in several functions
...
All these should return GstFlowReturn, not gboolean
2016-10-27 23:06:26 +05:30
Nirbheek Chauhan
e3c1a545ba
gstgl: Add GST_EXPORT to all symbols used on Windows
...
This is a requirement for those symbols to be exported in gstgl-1.0.dll
when building with the MSVC compiler
2016-10-27 23:06:25 +05:30
Nirbheek Chauhan
6f707381c3
meson: Add support for building WGL on Windows
...
Currently only tested with MSVC.
2016-10-27 23:06:25 +05:30
Nirbheek Chauhan
d5dba89fc0
gstgl: Porting fixes for MSVC with Meson
...
GL/gl.h needs windows.h on MSVC
WINAPI should not be used with MSVC. It also causes a build error.
2016-10-27 23:06:25 +05:30
Matthew Waters
cbaee81f9c
glsyncmeta: don't glFinish() everytime a sync point is set
...
At minimum, we only need to glFlush() if we are in a shared GL context
environment. Move the glFinish() to when the actual wait is requested
which may be never. Improves the throughput on older GL systems without
GL3/GLES3 and/or fence sync objects.
2016-10-21 15:54:37 +11:00
Matthew Waters
c36ea6f56f
meson: gl: add support for building with dispmanx on the rpi
2016-10-19 17:10:48 +11:00