Commit graph

2079 commits

Author SHA1 Message Date
Xabier Rodriguez Calvar
47415e50e1 debug-viewer: Fixed C++ destructors detection
https://bugzilla.gnome.org/show_bug.cgi?id=793447
2018-02-16 13:12:42 +00:00
Tim-Philipp Müller
32d146b7de Fix versions 2018-02-15 21:04:21 +00:00
Tim-Philipp Müller
41abaf99a9 Back to development 2018-02-15 19:44:37 +00:00
Tim-Philipp Müller
dab15df5eb Release 1.13.1 2018-02-15 18:28:13 +00:00
Tim-Philipp Müller
4906612269 validate: dist enum types templates 2018-02-15 18:28:13 +00:00
Xabier Rodriguez Calvar
50db93006e debug-viewer: Fix C++ detection of lambdas as function
https://bugzilla.gnome.org/show_bug.cgi?id=793422
2018-02-14 00:40:07 +00:00
Edward Hervey
55274bc89f validate-pad-monitor: Use GST_SEQNUM_INVALID
Instead of 0 (which is valid)
2018-02-10 14:20:44 +01:00
Olivier Crête
0aea5f29e3 debug-viewer; Store thread as long instead of int
On 64-bit platforms, the thread id can be over 2^32 so use a long
to handle it.
2018-02-08 08:20:55 -07:00
Wonchul Lee
0235ad6d03 tools: gst-validate-images-check: Fix typo
https://bugzilla.gnome.org/show_bug.cgi?id=792035
2018-01-31 17:40:56 +00:00
Tim-Philipp Müller
3bc6d34859 meson: use -fno-strict-aliasing where supported
https://bugzilla.gnome.org/show_bug.cgi?id=769183
2018-01-30 20:38:15 +00:00
Edward Hervey
d71d28523d validate/baseclasses: Release un-needed data when test ends
This was keeping around 500-700kB of data for each test, which was
gradually raising memory usage of a full run by 100MB+

The reports are definitely not needed, and we only need to keep
information from the subprocess env variable that we might need
later on for final reporting
2017-12-18 10:51:05 +01:00
Edward Hervey
cb04515cbd validate/baseclasses: Don't leak several hundred MB of XML
The xml-based MediaDescriptor were keeping open the XML file and the
associated ElementTree structures, resulting in memory usage of several
hundred megabytes.

Instead cache the information we need immediately and release the
XML structure
2017-12-18 09:48:21 +01:00
Nicolas Dufresne
aa8e27f2a3 meson: Add missing force_rtsp2 scenario
Without this file, gst-validate installed using meson will fail all
RTSP2 tests
2017-12-17 16:22:51 -05:00
Edward Hervey
01a54641f9 validate: Remove protocol-specific timeouts
Since we now check position/status of pipeline at regular intevals,
we no longer need to impose a different timeout based on the
protocol used.

Avoids having 4min long timeouts for no reason (30s is enough)
2017-12-03 12:23:51 +01:00
Edward Hervey
92285ef261 validate: Use a single TCPServer for subprocess communication
Instead of creating a separate TCPServer for each test, just create
one which handles all connections in a threaded fashion.

Shaves off ~500ms per test

https://bugzilla.gnome.org/show_bug.cgi?id=791159
2017-12-03 12:23:29 +01:00
Edward Hervey
58e62f651c validate-launcher: Allow running tests out-of-order
When the --shuffle option is used, the tests will be run out of order.
This optimizes CPU utilization since it allows running synchronized
and unsynchronized tests at the same.
2017-12-03 11:42:18 +01:00
Edward Hervey
1a95559045 validate: Reduce time waiting for subprocess to stop
stopping the subprocess is done from the main thread, this would
throttle starting/stopping any tests by one second.
Start with 50ms, and gradually increase the wait between iterations
2017-12-03 11:38:08 +01:00
Edward Hervey
65e2c1567a gstvalidate: Lower timeout to check for rtsp-server to be up
Check every 100ms, avoids throttling all rtsp tests by 500ms
2017-12-03 11:38:08 +01:00
Thibault Saunier
f16b900643 validate:launcher: Launch tests in _TestsLauncher not in TestsManagaer
So that Test from several TestManager can run in parallel and thus avoid
waiting for tests from one TestManager to run the following one.,

Also by design TestsLauncher should always have been the responsible for
... launching tests.
2017-12-02 09:42:19 -03:00
Edward Hervey
9acfa7fe4b validate: Don't leak strings
We only use them in the error/debug case anyway
2017-11-25 13:10:41 +01:00
Edward Hervey
c33b2e240c validate-report: Plug leaks
The trace was never freed, nor were the output of g_str_split
2017-11-25 12:46:05 +01:00
Edward Hervey
b5bb7d7016 validate-scenario: Don't assume element have factories
Some elements might not originate from factories (like custom/internal
elements).

Avoids dereferencing a NULL pointer
2017-11-23 12:27:11 +01:00
Edward Hervey
ff6055b195 validate-scenario: Handle non-relative switch
Make sure we stay within the number of present streams (and avoid
out-of-bound read).

CID #1415470
2017-11-22 16:37:44 +01:00
Edward Hervey
81c3ab0b12 validate-scenario: Handle switching stream of type not present
Unlikely to happen, but at least don't end up doing unsafe calculation
with n == 0 afterwards

CID #1415453
2017-11-22 16:37:44 +01:00
Nirbheek Chauhan
aa7f753f8a meson: Always require the latest gst-rtsp-server
In the worst case, when building with gst-uninstalled, we will try to
link against an older gst-rtsp-server provided by the system. Found by
philn.
2017-11-12 20:09:53 +05:30
Edward Hervey
9658e12086 validate: Call g-ir-scanner with the same toolchain as the rest 2017-11-08 17:22:47 +01:00
Edward Hervey
2eb3df74b5 validate-analyze: Update for xml format changes 2017-10-27 10:00:07 +02:00
Thibault Saunier
4fac7bf9fd validate: launcher: Run rtsp tests against both V1 and V2
https://bugzilla.gnome.org/show_bug.cgi?id=781446
2017-09-22 16:31:56 -03:00
Thibault Saunier
e9862b9fda validate:launcher: Allow disabling using the number of failed tests as exitcode
This is usefull on CI servers where the test results will be inspected
and the status of the build built from it.
2017-09-06 16:38:39 -03:00
Jimmy Ohn
bd0e8e410e validate: launcher: Modify the order of the parser argument
Modify the order of the parser argument before setting dir_group

https://bugzilla.gnome.org/show_bug.cgi?id=786715
2017-08-28 17:01:39 -03:00
Thibault Saunier
4dc95f0fc2 launcher: Automatically disable output coloration if not supported 2017-08-26 10:52:25 -03:00
Thibault Saunier
598128fc0c meson: Fix the way we set the testsuite version 2017-08-26 09:28:51 -03:00
Thibault Saunier
2c6c25d4bf validate:launcher: Use the number of failed test as exit code
We used to always return 0, which was not right!
2017-08-18 11:37:28 -03:00
Thibault Saunier
cb99482b9a launcher: Avoid exceptions when inspecting renders files
We were a bit to strict on the Exception types which lead to
the launcher failling itself when it shouldn't
2017-08-14 16:57:50 -03:00
Tim-Philipp Müller
a0ff0095b5 meson: hide symbols by default unless explicitly exported 2017-08-12 12:08:09 +01:00
Tim-Philipp Müller
8b91fef492 validate: hide some private symbols 2017-08-12 12:04:42 +01:00
Thibault Saunier
8393a3d5ca validate: Plug a potential leak when retrieving peer pad 2017-08-10 21:44:14 -04:00
Thibault Saunier
7be8ecd628 validate: Fix going over ghostpads/proxypads 2017-08-10 19:29:07 -04:00
Tim-Philipp Müller
6b661f394f meson: fix a few meson warnings
WARNING: The variable(s) 'DATADIR', 'LIBDIR' in the input file
  'subprojects/gst-devtools/validate/launcher/config.py.in' are not
  present in the given configuration data
WARNING: Passed invalid keyword argument "scanobj_args". This will
  become a hard error in the future.
WARNING: Keyword argument "install" defined multiple times. This
  will be a an error in future Meson releases.
2017-08-10 14:35:09 +01:00
Thibault Saunier
7a83d2aed7 validate:win32: Update .def file. 2017-08-07 16:00:53 -04:00
Thibault Saunier
74a560163a validate: Mark symbols explicitly for export with GST_EXPORT
With an exception:
  * gst_validate_monitor_setup

which was never declared in headers and should always have been static.
2017-08-07 15:56:21 -04:00
Thibault Saunier
823c9ca834 validate: Fix building the tracer
It fails on some platforms, I guess this is the reason
2017-07-26 17:25:25 -04:00
Thibault Saunier
8ef1050d1e validate: Also mkenums with autotools
And fix the build with stricter gcc arguments.
2017-07-26 16:18:02 -04:00
Thibault Saunier
b9d6f9df9e validate: Add a way to print information about pipeline status
Similare to what is done with gst-launch.

And finally generate GTypes for our flags and enums.
2017-07-26 15:45:37 -04:00
Edward Hervey
40eb48d21f validate-scenario: Fix NULL pointer usage
for good this time ...

CID #1415570
2017-07-26 15:22:49 +02:00
Edward Hervey
1b48ffdff5 validate-report: Fix a leak in error cases
CID #1415494
2017-07-26 15:18:57 +02:00
Edward Hervey
9ae20ee3e0 validate: Re-enable mxf op2b tests
https://bugzilla.gnome.org/show_bug.cgi?id=785119
2017-07-25 09:55:02 +02:00
Thibault Saunier
be95f623b7 wind32: Update .def file. 2017-07-21 10:30:37 -04:00
Edward Hervey
6ad8bd3e7c validate-scenario: Protect against priv NULL usage
CID #1415570
2017-07-20 14:21:59 +02:00
Thibault Saunier
2fb3545aa7 validate: Do not install now removed setup_sink_props_max_lateness.scenario file 2017-07-19 12:16:53 -04:00