No longer call _priv_gst_value_parse_string with unescape set to TRUE
before passing a value to gst_value_deserialize in
_priv_gst_value_parse_value. This latter function is called by
gst_structure_from_string and gst_caps_from_string.
When gst_structure_to_string and gst_caps_to_string are called, no
escaping is performed after calling gst_value_serialize. Therefore, by
unescaping the value string, we were introducing an additional operation
that was not performed by the original *_to_string functions. In
particular, this has meant that the derialization functions for many
non-basic types are incomplete reverses of the corresponding
serialization function (i.e., if you pipe the output of the
serialization function into the deserialization function it could fail)
because they have to compensate for this additional escaping operation,
when really this should be the domain of the deserialization functions
instead.
Correspondingly changed a few deserialization functions.
Fixes https://gitlab.freedesktop.org/gstreamer/gstreamer/issues/452
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/303>
This reduces the chance of the main thread getting starved while trying
to shut down the test, potentially causing a timeout.
Even on an idle 96-processor system this reduces the duration of the
systemclock tests from ~8s to ~3s.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/734>
Until now we were enforcing that only 1 signal GSource was attached
the bus but we could attach as many GSource with `gst_bus_create_watch`
as we wanted... but in the end only 1 GSource will ever be dispatched for
a given `GstMessage` leading to totally broken behavior.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/718>
This introduces a more human friendly syntax to specify nested
structures It does so by using 2 different markers for opening and
closing them instead of abusing quotes which lead to requiring an insane
amount of escaping to match nesting levels.
The brackets (`[` and `]`) have been chosen as they avoid complex
constructions with curly brackets (or lower/higher than signs) where you
could have structures embedded inside arrays (which also use curly
brackets), ie. `s, array=(structure){{struct}}` should be parsed as an
array of structures, but the cast seems to imply something different. We
do not have this issue with brackets as they are currently used for
ranges, which can only be casted to numeric types.
This commit does not make use of that new syntax for serialization as
that would break backward compatibility, so it is basically a 'sugar'
syntax for humans. A notice has been explicitly made in the
documentation to let the user know about it.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/532>
While the default implementation will spawn a thread per new
pushed task, this new implementation instead spawns a maximum
number of threads, then queues new tasks on existing threads.
The thread that the new task will be queued on is picked in
a pretty naive fashion, by simply popping the first thread
from a queue and pushing it back to the tail, but this is
an implementation detail and can always be sophisticated
in the future if the need arises.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/692>
If a device provider fails to start (for instance the pulseaudio provider unable
to connect to the PulseAudio daemon) then the monitor should not keep track of
it in its `started` providers list. Otherwise a false positive critical warning
would be raised.
This patch also switches the started_count type from bool to int, for
consistency. This is a counter, after all.
API: gst_device_provider_is_started
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/679>
Typing hints can only be passed to gst_value_deserialize()
through the type of the passed-in value. This means deserialization
can only target the desired type for the top-level elements,
making it for example impossible to deserialize an array of
flags to the expected type.
This commit exposes a new function, gst_value_deserialize_full(),
that takes an optional pspec as the extra parameter, and updates
the deserialization code to pass around that pspec, or the
element_spec when recursively parsing the elements of a list-type
value.
This allows for example passing arrays of flags through the
command line or gst_util_set_object_arg, eg:
foo="<bar,bar+baz>"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/629>
Custom meta is backed by a GstStructure, and does not require
that users of the API expose their GstMeta implementation as
public API for other components to make use of it.
In addition, it provides a simpler interface by ignoring the
impl vs. api distinction that the regular API exposes.
This new API is meant to be the meta counterpart to custom events
and messages, and to be more convenient than the lower-level API
when the absolute best performance isn't a requirement.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/609>
For providers that don't support dynamic probing, just fall back to doing
a static one on start() to make the UI developers life easier.
This also means that the monitor doesn't need to call _can_monitor() before
calling start.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/353>
There is a race-condition that can trigger the assertion in
gst_bus_add_signal_watch_full():
If gst_bus_add_signal_watch_full() is called immediately after
gst_bus_remove_signal_watch() then bus->priv->signal_watch may still be set
because gst_bus_source_dispose() or gst_bus_source_finalize() was not yet
called.
This happens if the corresponding GMainContext has the source queued for
dispatch. In this case, the following dispatch will only unref and delete
the signal_watch because it was already destroyed. Any pending messages
will remain until a new watch is installed.
So bus->priv->signal_watch can be cleared immediately when the watch is
removed. This avoid the race condition.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/543>
These can be passed to gst_type_mark_as_plugin_api, to inform
plugin cache generation.
For now a single flag is specified, "IGNORE_ENUM_MEMBERS", it
can be used for dynamically generated enums to avoid documenting
environment-specific enumeration members. An example is
GstX265EncTune.
Since those are using the clock for sync, they need to also
provide a clock for good measure. The reason is that even if
downstream elements provide a clock, we don't want to have
that clock selected because it might not be running yet.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gstreamer/-/merge_requests/509>
To allow the refcounting tracer to work better. In childproxy/iterator
these might be plain GObjects but gst_object_unref() also works on them.
In other places where it is never GstObject, g_object_unref() is kept.
This new API allow resuming a task if it was paused, while leaving it to
stopped stated if it was stopped or not started yet. This new API can be
useful for callback driver workflow, where you basically want to pause and
resume the task when buffers are notified while avoiding the race with a
gst_task_stop() coming from another thread.
In case the buffer is not writable, the parent (the BufferList) is not
removed before calling func. So if it is changed, the parent (the BufferList)
of the previous buffer should be removed after calling func.
Before that commit `{test, }` wouldn't be accepted as an array
because of the trailing coma, the commit fixes that.
At the same time, the code has been refactored to avoid special casing
the first element of the list, making `{,}` or `<,>` valid lists.
fixate() will return empty caps if it gets empty caps passed and assert
early if any caps are provided as there's no meaningful way of fixating
any caps.
truncate() and simplify() will return the input caps in case of
any/empty caps as before, but slightly optimized and as documented
behaviour.
Also add tests for this and a few other operations behaviour on
empty/any caps.
Keep the ANY caps empty internally when appending and merging
caps/structures. Previously, an ANY caps could end up containing
internal structures, which could be fetched by the user, and gave the
caps a non-zero length.
Also, made sure that `gst_caps_set_features_simple` frees the features
if caps is empty.
Fixed gst_caps_is_strictly_equal() to take into account whether either of
the caps are ANY caps. Previously, two ANY caps could be considered not
strictly equal if one of them still contained some remnant *internal*
structure (this can happen if an ANY caps has emerged from an append or
merge operation). Also, an ANY caps with no remnant internal structures
was considered strictly equal to an EMPTY caps. Similarly, a non-ANY caps
was considered strictly equal to an ANY caps if its remnant internal
structures happened to match.
Also changed gst_caps_is_fixed to take into account that an ANY caps
should not be considered fixed even if it contains a single remnant
internal fixed structure. This affects gst_caps_is_equal(), which uses a
separate method if both caps are fixed. Previously, this meant that a
non-ANY fixed caps was considered equal to an ANY caps if it contained a
single matching remnant internal structure.
Added some tests for these two equality methods, which covers the above
examples, as well as asserts existing behaviour.
Fixes#496
If you're using a custom log handler, you had to reverse-engineer the
debug log format and create your own format function. Now, you can
call `gst_debug_log_get_line()` and it will return a string (without
ANSI escape color codes) representation instead.
This is useful in situations when you need to log the ordinary
gst_debug log to a resource that can't be opened as a `FILE` handle.
Also includes a test.
We now have GstTestClock-based tests that validate the same logic,
without inducing spurious timing failures / overly relying on sleeps.
Fixes: #346Fixes: #347Fixes: #348
Co-authored by: Thibault Saunier <tsaunier@igalia.com>
A common use case of a dynamically built pipeline is that you want to
(conditionally) find a certain element, e.g. the `rtpbin`s in a
`uridecodebin`. If that element has a fixed name inside its parent bin
(and only has a single instance) this can be easily done by
`gst_bin_get_by_name()`.
If there are multiple instances of the element however, you can only use
`gst_bin_iterate_all_by_interface()`, but this doesn't work if you don't
have the specific `GType` (which is often the case, due to plugins being
dynamically loaded). As such, another fallback could be to use the
well-known name of the element's factory (in case of our example, this
is of course `"rtpbin"`).
