else gst_video_meta_validate_alignment will report error like
"videometa gstvideometa.c:416:gst_video_meta_validate_alignment: Stride of plane 0 defined in meta (384) is different from the one computed from the alignment (320)"
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1224>
When negotiating the SDP we should only connect the streams that are
actually mentioned in the SDP. All other streams are not relevant at
this time and would likely be part of a future SDP update. Fixes a
couple of the renegotiation webrtc unit tests.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1240>
In section 9.3.4 a), segment_feature_mode have 0 for absolute and 1 for delta,
while in 19.2, it says the opposite. But the reference code, which usually
rules over the text state that 1 means absolute:
if (hdr->update_data)
{
hdr->abs = bool_get_bit(bool);
And uses it with that meaning to decide weither to override the existing value
or just add the detla. This fixes multiple decoding issues.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1245>
Proper calculate running time for buffers that are out of current
segment and try to honor them.
A typical case is for AVTP packets coming from avtpcvfpay element, as
those may have DTS that falls out of segment (which is about PTS).
By using gst_segment_to_running_time_full(), avtpsink can properly
calculate when to transmit those buffers.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1004>
Seek events will cause new segments to be sent to avtpcvfpay, and for
flushing seeks, a pipeline running time reset. This running time
reset, which effectively changes pipeline base time, will cause
avtpcvfpay element to generate incorrect DTS for the initial set of
buffers sent after FLUSH_STOP.
This happens due the fact that base time change happens only when the
sink gets the first buffer after the FLUSH_STOP - so avtpcvfpay used
the wrong base time to do its calculations.
However, if the pipeline is paused before the seek, sink will update
base time when pipeline state goes to PLAYING again, before avtpcvfpay
gets the first buffers after the flush. Then avtpcvfpay element will be
able to normally calculate DTS for the outgoing packets.
This patch simply adds a warning message in case a flushing seek is
performed on a playing pipeline.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1004>
TSN streams are expected to send packets to the network in a well
defined "pace", which is arbitrarily defined for each stream. This pace
is defined by the "measurement interval" property of a stream.
When the AVTP CVF payloader element - avtpcvfpay - fragments a video
frame that is too big to be sent to the network, it currently defines
that all fragments should be transmitted at the same time (via DTS
property of GstBuffers generated, as sink will use those to time the
transmission of the AVTPDU). This doesn't comply with stream definition,
which also has a limit on how many packets can be sent on a given
measurement interval.
This patch solves that by spreading in time the DTS of the GstBuffers
containing the AVTPDUs. Two new properties, "measurement-interval" and
"max-interval-frames", added to avptcvfpay element so that it knows
stream measurement interval and how many AVTPDUs it can send on any of
them. More details on the method used to proper spread DTS/PTS according
to measurement interval can be found in a code commentary inside this patch.
Tests also added for the new property and behaviour.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1004>
This is the first version of AV1 parser implementation in GStreamer.
A test file is also provied with several test cases. It contains a
test sequence taken from the aom testdata set, with one key and one
inter-frame. The same test sequence has been reencoded to annexb.
testdata is taken from aom testdata (and reencoded for annexb) as well
as handcrafted testcases. Once reference testdata is available, the
testing could be imporved aswell.
Co-author: He Junyan <junyan.he@hotmail.com>
Co-author: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/785>
The volatile is not needed here and causes compiler warnings
with newer GLib versions.
gstautoconvert.c: In function ‘gst_auto_convert_dispose’ (and elsewhere):
glib/gatomic.h:108:3: warning: initialization discards ‘volatile’ qualifier from pointer target type [-Wdiscarded-qualifiers]
gstautoconvert.c:224:24: note: in expansion of macro ‘g_atomic_pointer_get’
224 | GList *factories = g_atomic_pointer_get (&autoconvert->factories);
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1237>
If the remote is bundling, but we are not and remote is offering.
we cannot put the remote media sections into a bundled transport as that
is not how we are going to respond.
This specific failure case was that the remote ICE credentials were
never set on the ice stream and so ice connectivity would fail.
Technically, this whole bunde-policy=none handling should be removed
eventually when we implement bundle-policy=balanced. Until such time,
we have this workaround.
Part-of: <https://gitlab.freedesktop.org/gstreamer/gst-plugins-bad/-/merge_requests/1231>
This adds tests to validate whether the avtpcrfsync element applies the
adjustment correctly.
Also, the infrastructure to include additional source files while compiling
is added. This change is exactly the same as the one in gst-plugins-good.
This commit introduces the AVTP Clock Reference Format (CRF) Checker
element. This element re-uses the GstAvtpCrfBase class introduced along
with the CRF Synchronizer element.
This element will typically be used along with the avtpsrc element to
ensure that the AVTP timestamp (and H264 timestamp in case of CVF-H264
packets) is "aligned" with the incoming CRF stream. Here, "aligned" means
that the timestamp value should be within 25% of the period of the media
clock recovered from the CRF stream.
The user can also set an option (drop-invalid) in order to drop any packet
whose timestamp is not within the thresholds of the incoming CRF stream.
This commit introduces the AVTP Clock Reference Format (CRF) Synchronizer
element. This element implements the AVTP CRF Listener as described in IEEE
1722-2016 Section 10.
CRF is useful in synchronizing events within different systems by
distributing a common clock. This is useful in a scenario where there are
multiple talkers who are sending data to a single listener which is
processing that data. E.g. CCTV cameras on a network sending AVTP video
streams to a base station to display on the same screen.
It is assumed that all the systems are already time-synchronized with each
other. So, the AVTP Talker essentially adjusts the AVTP Presentation Time
so it's phase-locked with the reference clock provided by the CRF stream.
There are 2 different roles of systems which participate in CRF data
exchange. A system can either be a CRF Talker, which samples it's own
clock and generates a stream of timestamps to transmit over the network, or
a CRF Listener, the system which receives the generated timestamps and
recovers the media clock from the timestamps. It then adjusts it's own
clock to align with recovered media clock. The timestamps generated by the
talker may not be continuous and the listener might have to interpolate
some timestamps to recover the media clock. The number of timestamps to
interpolate is mentioned in the CRF stream AVTPDU (Refer IEEE 1722-2016
Section 10.4 for AVTPDU structure). Only CRF Listener has been implemented
in this commit.
The CRF Sync element will create a separate thread to listen for the CRF
stream. This thread will calculate and store the average period of the
recovered media clock. The pipeline thread will use this stored period
along with the first timestamp of the latest CRF AVTPDU received to
calculate adjustment for timestamps in the audio/video streams. In case of
CRF AVTPDUs with single timestamp, two consecutive CRF AVTPDUs will be used
to figure out the average period of the recovered media clock.
In case of H264 streams, both AVTP timestamp and H264 timestamp will be
adjusted.
In the future commits, another "CRF Checker" element will be introduced
which will validate the timestamps on the AVTP Listener side. Which is why
a lot of code has been implemented as part of the gstcrfbase class.
