Implement 2 new elements - splitmuxsink and splitmuxsrc.
splitmuxsink is a bin which wraps a muxer and takes 1 video stream,
plus audio/subtitle streams, and starts a new file
whenever necessary to avoid overrunning a threshold of either bytes
or time. New files are started at a keyframe, and corresponding audio
and subtitle streams are split at packet boundaries to match
video GOP timestamps.
splitmuxsrc is a corresponding source element which handles
the splitmux:// URL and plays back all component files,
reconstructing the original elementary streams as it goes.
Our ones were expired. The new ones were copied from libsoup's
tests files.
Also sets the property to use our own cert to validate the
server, otherwise the default system certs would be used
and it would fail.
They should always be built, while the speex elements are not.
Need to check for a smaller number of buffers then (7->4) because
speexenc will add 3 header buffers while alawenc will just output
as many buffers as it receives as input.
https://bugzilla.gnome.org/show_bug.cgi?id=742098
rtpmux behaves like a funnel in that it forwards whatever upstream is
sending buffers. So setting proxy caps doesn't make sense as the
upstream don't have to have compatible caps, thus resulting in an empty
caps set as a result of a caps query. Instead set fixed caps just
as funnel does.
https://bugzilla.gnome.org/show_bug.cgi?id=738722
Actually look for error messages on the bus and fail if there
is one before the EOS message. Disable pull mode test which is
pointless as long as matroskaparse only supports push mode
(pull mode support has not been ported over to 1.0).
Fix the raciness by iterating on a condition instead of using the gmainloop.
Don't use the EOS as the target, otherwise the retransmission of the last
packets are lost. Also count the retranmissions requests that are dropped.
Check the condition before blocking on the GCond
https://bugzilla.gnome.org/show_bug.cgi?id=728501
As we now replace the local RTPSource on a conflict, it's no longer possible
to keep local conflicts in the RTPSource, so they instead need to be kept
in the RTPSession.
Also fix the rtpcollision test to generate multiple collisions instead of
one by change the address, as otherwise we detected that it was a single one.
From libsoup docs:
Prior to 2.44 SoupStatus was called SoupKnownStatusCode,
but the individual values have always had the names they
have now.
Fixes:
https://bugzilla.gnome.org/show_bug.cgi?id=727329
Add fake audio/video sinks. Previously running the test might be flaky due to
the use of real elements (hardware in use), which we don't want to test here.
Add two more tests that check that the fakes are chosen.
Ensures the test can run on systems without alsa (or any audio output for
that matter), and will avoid people running build slaves wondering what
the hell was beeping during the night :)
Now with rtprtxsend pushing rtx buffers from a different thread,
this is necessary to ensure that the result of the test is deterministic.
This code makes use of GstCheck's global GMutex and GCond that are
being used inside GstCheck's sink pad chain() function in order
to synchronize with it.
Now with rtprtxsend pushing rtx buffers from a different thread,
this is necessary to ensure that the result of the test is deterministic.
This code makes use of GstCheck's global GMutex and GCond that are
being used inside GstCheck's sink pad chain() function in order
to synchronize with it.
Now with rtprtxsend pushing rtx buffers from a different thread,
this is necessary to ensure that the result of the test is deterministic.
This code makes use of GstCheck's global GMutex and GCond that are
being used inside GstCheck's sink pad chain() function in order
to synchronize with it.
It shows how to use "set-aux-receive" and "set-aux-send"
properties of rtpbin to set rtprtxsend and rtprtxreceive
Build 2 pipelines, one for rtpbin as a sender and one for
rtobin as a receive. Then transmit an audio stream.
It also drops some packets to activate restransmission and
check they are actually retransmited.
This unit test verifies that the rtxsend element correctly maintains
a buffer of already transmitted rtp packets and that it can
re-transmit all of them correctly on demand. It also verifies
that the limit of this buffer (max-size-packets property) is respected.
Several senders / one receiver
Similar than test_drop_one_sender but with multiple senders
mixed through the funnel element.
It drops some packets and checks that they are retransmited
correctly.
Test for one sender / one receiver
Build the pipeline
videotestsrc ! rtpvrawpay ! rtprtxsend ! rtprtxreceive ! fakesink
and drop some buffers between rtprtxsend and rtprtxreceive
Then it checks that every dropped packet has been re-sent.
It also checks that not too much requests has been sent.
Keep track of elements that are added to multiple sessions and make sure
we only add them to the rtpbin once and that we clean them when no
session refers to them anymore.
This test checks that when we have multiple internal sender sources
in rtpsession, SRs contain RBs for every other sender source, and that
they are included roundrobin when they exceed ST_RTCP_MAX_RB_COUNT,
which is the max number of RBs that can fit in a SR.
The parser can accept input that is not completely specified. Use the
ACCEPT_INTERSECT flag on the sinkpad to tweak the acceptcaps function to
check for intersection only. This allows us to proxy downstream
constraints while still allowing non-subset caps as input.
We can then also remove the appended template caps workaround.
Make a unit-test to check the new feature.
This reverts commit 26040ee38c
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=705024
These new tests send a tag event before seding the buffer. Tested case are an
empty tag list, a tag list with orientation-180 set and an invalid orientation value.
https://bugzilla.gnome.org/show_bug.cgi?id=719497
Don't reset the expected output seqnum when clearing the pt map because this
could stall the jitterbuffer forever.
Add a unit test for this.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=709800
Silencing this warning:
elements/souphttpsrc.c:533:14: error: comparison between ‘SoupKnownStatusCode’ and ‘enum <anonymous>’ [-Werror=enum-compare]
if (status != SOUP_STATUS_OK && !send_error_doc)
With gcc 4.8.2 (debian)
Store both DTS and PTS on buffers.
Make a queue for srcpad events.
Activate pads after linking so that we don't get RECONFIGURE events.
Add test for retransmission.
When we have a large number of missing packets, generate one lost event for all
the packets that have no chance of being pushed out in time.
Fix and activate unit test for large gaps.
In 0.10 elements would post tag messages on the bus
directly, and rganalysis would only post a tag message
when it changed tags. In 1.0, only sinks post tag
messages when they receive the serialised tag event.
This means that we get an additional tag message on
the bus now where we didn't expect one before.
https://bugzilla.gnome.org/show_bug.cgi?id=695090
The previous implementation had the formatting of SDP attributes happen
in each RTP payloader, now instead the constituent values are propagated
as caps fields. This allows for applications to do SDP offer/answer
based on caps negotiation.
Fixes https://bugzilla.gnome.org/show_bug.cgi?id=700748
Previously we would skip level message when processing buffers > the requested
interval. Also the message frequency would contain quite some jitter due to only
considering them at the end of buffers.
Cleanup the tests while we're at it.
We're testing with an http server on localhost, but don't support
an exception list for the http_proxy, so just unset the environment
variable to make sure we can run this test properly even if the
environment has http_proxy set.
Also, don't skip all tests if there is an issue with the SSL server,
just run the non-SSL tests then.
https://jenkins.qa.ubuntu.com/view/Raring/view/JHBuild%20Gnome/job/jhbuild-amd64-gst-plugins-good/
These override the variants without version suffix. Makes 'make check' work
properly in environments that set the suffixed variant for 1.0, such as
jhbuild.
Shout2send only accepts webm format, not matroska, but due
to a bug in matroskamux, webmmux's source pad is also created
with the matroska source pad template as pad template, which
makes the link function think it can't link webmmux to shout2send.
Also add unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=689336
This change enable automatic cropping using -1 set to left, top, right or
bottom property. In the case both side are set to automatic cropping, the
croping will be done equally on both side (in the odd case, right and
bottom cropping will be 1 pixel more).
https://bugzilla.gnome.org/show_bug.cgi?id=687761
- dist input files
- fix sample leak
- simplify check for elements
- only run mpg123 test if mpg123 is available and selected
- fix build in uninstalled setup
https://bugzilla.gnome.org/show_bug.cgi?id=686595
gst_video_frame_map() increases the refcount, which makes
the buffer not writable any more technically, so calling
gst_buffer_memset() on it will cause nasty warnings.
Unit test disabled because it very rarely (for me)
fails, possibly negotiation-related.
https://bugzilla.gnome.org/show_bug.cgi?id=684398
Before the element would post messages on the bus itself, now
the sinks do that based on the tag events they receive. But
since we don't have proper sink elements in these unit tests,
but just dangling pads, we have to post the tag messages the
test checks for ourselves.
Down from 52/55 failing to 7/52 failing.
Fix deinterlace unit test. Need to set right field on output caps.
Also remove right field (not old 0.10 "interlaced" boolean field)
from caps in unit test before comparing old and new.
Was waiting for a tag message on the bus, which would never
come, because elements don't post those themselves any more
but let sinks post them from tag events. Only that there are
no sinks in this unit test.
rtph263ppay should accept any input compatible with its sink template
caps if it just outputs to e.g. udpsink or fakesink.
rtph263ppay ! rtph263pdepay should also work with any compatible input.
This would fail before with not-negotiated errors because the get_caps
function would see the encoding-name in the depayloader's template caps
and default to baseline H.263 because there's no profile/level information
in those caps, which is the right thing to do if downstream has filtercaps
from an SDP, but not if those fields are absent because they can be
anything like with the depayloader's template caps. Makes
videotestsrc ! avenc_h263p ! rtph263ppay ! rtph263pdepay ! fakesink
work.
Need to add h263version field to input caps since the
payloader sink get_caps function will contain it in the
the caps, and the stricter caps subset check requires
this to be present in the input caps as well then.
Must flush after EOS before sending more buffers or
another EOS event, or the event or buffer will be
rejected. Also send a SEGMENT event at the start
of each stream for good measure.
Must flush after EOS before sending more buffers or
another EOS event, or the event or buffer will be
rejected. Also send a SEGMENT event at the start
of each stream for good measure.
This never really took off and is most likely completely
unused. If there is still a need for this, it should
probably be done differently, perhaps inside oggdemux/mux.
Or perhaps it should just be a guint64 channel mask, which would
be nicer in C, but more awkward for bindings (even more so since
we can't add a flags type for it, since that only supports guint
size flags). Fixes wavenc unit test.
https://bugzilla.gnome.org/show_bug.cgi?id=669643
