Commit graph

10639 commits

Author SHA1 Message Date
Nicola Murino
436620fff9 fix valgrind warning about Conditional jump or move depends on uninitialised value(s) 2011-08-26 15:54:19 +02:00
Nicola Murino
71a2a1be8e Move m_pprevFrame free just before the clone of the latest frame for readability 2011-08-26 15:54:19 +02:00
Thiago Santos
5ae630489c camerabin2: Make viewfinder's queue a thread limit only
Reduce the viewfinder queue limits to only allow it to store
one buffer, preventing the queue from holding old buffers for
too long. This also avoids showing slightly outdated frames on
the viewfinder when the source has already produced new ones
and improves the buffer recycling rate, important for sources
that use bufferpools.
2011-08-26 09:43:14 -03:00
Vincent Penquerc'h
f3cb4439cf basevideoencoder: fix element leak
and this concludes an hour of yelling at the bloody test failing,
only to track down the problem not being in the test.

https://bugzilla.gnome.org/show_bug.cgi?id=657368
2011-08-26 10:25:46 +02:00
Youness Alaoui
e380fbb019 tsdemux: In push mode, do not start pull loop if upstream seek fails 2011-08-26 09:51:46 +02:00
Youness Alaoui
108493ee51 hlsdemux: do not make the update_thread joinable 2011-08-26 09:51:46 +02:00
Youness Alaoui
8c04ea47d2 hlsdemux: Ensure the task is paused in case of cache error 2011-08-26 09:51:46 +02:00
Youness Alaoui
46ac6a2589 hlsdemux: stop the threads in the proper order
first pause the task, then stop all fetchers, then stop the update thread
then pause the task again, since it might have been restarted by
another thread in the meantime
2011-08-26 09:51:46 +02:00
Youness Alaoui
015d1e11e2 hlsdemux: do not post an error if we seek/cancel during caching of fragments 2011-08-26 09:51:46 +02:00
Youness Alaoui
d69297a23c hlsdemux: if we're canceling a fetcher, we must stop its thread 2011-08-26 09:51:46 +02:00
Youness Alaoui
42401da686 hlsdemux: lock the update_thread mutex before stopping it 2011-08-26 09:51:46 +02:00
Youness Alaoui
39657fa52f hlsdemux: lock the fetcher mutex before stopping it 2011-08-26 09:51:45 +02:00
Youness Alaoui
e1a0bdcdf5 hlsdemux: do not allow two fetchers to run simultanously 2011-08-26 09:51:45 +02:00
Youness Alaoui
adcfcabb14 hlsdemux: Stop the streaming task on PAUSED_TO_READY state change 2011-08-26 09:51:45 +02:00
Vincent Penquerc'h
60442079f3 tests: make camerabin2 test build
https://bugzilla.gnome.org/show_bug.cgi?id=657363
2011-08-25 16:46:58 -03:00
Olivier Crête
1fdae52753 dtmf: Add more debug 2011-08-24 12:24:18 -04:00
Olivier Crête
4167697c0e dtmf: Max event type is 15 2011-08-24 12:24:18 -04:00
Olivier Crête
e8268053c2 dtmfsrc: Align DTMF sound buffers with last-stop from event
Also make sure the timestamps never go backwards
2011-08-24 12:24:18 -04:00
Olivier Crête
2c7257481a rtpdtmfsrc: Correctly recognize the end of a buffer 2011-08-24 12:24:18 -04:00
Olivier Crête
7c55ff3023 rtpdtmfsrc: Make sure rtpdtmfsrc timestamps don't overlap 2011-08-24 12:24:17 -04:00
Olivier Crête
e6c431a533 rtpdtmfsrc: Put the inter digit interval at the end, not at the start
The reason is to let rtpdtmfmux drop buffers during the inter digit interval,
this way, there will be more silence around the DTMF tones so IVFs will have
a better chance recognizing them.
2011-08-24 12:24:17 -04:00
Olivier Crête
7837cc25fb rtpdtmfsrc: Start at the last_stop from the start event if there was one
The goal is to try to not have a GAP between the audio and the DTMF
2011-08-24 12:24:17 -04:00
Olivier Crête
859b8ebfc9 rtpdtmfmux: Add last-stop to dtmf-event upstream events
Add the running time of the last outputted buffer to the
upstream "dtmf-event" events so that the dtmf source does not
leave a gap.
2011-08-24 12:24:17 -04:00
Olivier Crête
38aaf7cbab rtpdtmfsrc: Respect ptime from the caps
Respect the ptime from the caps for the DTMF packets
2011-08-24 12:24:17 -04:00
Olivier Crête
4f97524376 rtpdtmfsrc: Just error out if there is no clock 2011-08-24 12:24:17 -04:00
Tim-Philipp Müller
dc3db053b5 kate: make gst_kate_util_is_utf8_string() inline to fix compiler warning with older libkate versions
gstkateutil.c:230:1: error: 'gst_kate_util_is_utf8_string' defined but not used
2011-08-24 16:54:31 +01:00
Vincent Penquerc'h
04f7876f94 rsndvd: ensure metadata is writable when writing to it
https://bugzilla.gnome.org/show_bug.cgi?id=657250
2011-08-24 16:37:30 +01:00
Sebastian Dröge
c86aba3469 tsdemux: Use FALSE instead of 0 for bool parameter 2011-08-24 09:35:18 +02:00
Youness Alaoui
744101a417 tsdemux: Need to send a newsegment after a seek 2011-08-24 08:12:29 +02:00
Youness Alaoui
a3fc3ec443 hlsdemux: Send buffering messages on the bus 2011-08-24 08:12:19 +02:00
Youness Alaoui
e2de4e5870 hlsdemux: cache the number of fragments we are required to cache 2011-08-24 08:12:14 +02:00
Youness Alaoui
cfd28a6f90 tsdemux: Forward seek/duration query/event to the sinkpad 2011-08-24 07:48:52 +02:00
Thiago Santos
69c65875ea camerabin2: Optimize start up a little by removing some pad checks
Some pad checks are guaranteed to work, so we can disable them
by using gst_element_link_pads_full
2011-08-24 01:03:32 -03:00
Thiago Santos
011eddcd0e camerabin2: Remove from experimental
Remove camerabin2 from experimental, allowing it to be built
without needing to pass --enable-experimental on configure.
2011-08-23 19:26:31 -03:00
Thiago Santos
e32897d809 camerabin2: Always set encodebin flags when going to ready
When going from NULL to READY we want the encodebin flags to be
set, and not only after creating encodebin (on the first run)
2011-08-23 19:13:21 -03:00
Thiago Santos
5c662ec0c7 camerabin2: Add new entry to flags property
Adds a new entry to camerabin2 flags to disable viewfinder
conversion elements.
2011-08-23 11:58:33 -03:00
Thiago Santos
dc9276b9ee camerabin2: viewfinderbin: Add property for disabling converters
Adds a new property to disable converters elements for performance
reasons. It should only be used if the application knows they aren't
needed.
2011-08-23 11:19:51 -03:00
Vincent Penquerc'h
66dbdfd4d1 tsdemux: do not try to compare a PCR with itself for statistics
Especially as one of the logs will cause a divide by zero.

https://bugzilla.gnome.org/show_bug.cgi?id=656927
2011-08-23 10:38:10 +02:00
Vincent Penquerc'h
b19a5ea1f3 tsdemux: do not keep a dangling pointer
When removing the current program, it will get freed by the
hash table removal callback, so ensure we clear our pointer
to it.

Fixes a crash later on in gst_ts_demux_push trying to access it.

https://bugzilla.gnome.org/show_bug.cgi?id=656927
2011-08-23 10:37:24 +02:00
Vincent Penquerc'h
d1a6ca2203 kate: pass on timed event metadata as tags when we can
Metadata attached to other objects that may be used in this
event are not passed, as is binary metadata.
2011-08-23 10:34:48 +02:00
Sebastian Dröge
8d5f2c7078 configure: Add AC_MSG_CHECKING() to the VP8E_SET_TUNING presence check 2011-08-23 10:32:14 +02:00
Vincent Penquerc'h
c24d052bb7 vp8: probe for the new tuning API to keep building with older libvpx
https://bugzilla.gnome.org/show_bug.cgi?id=656928
2011-08-23 10:23:21 +02:00
Vincent Penquerc'h
e323efc353 rsvgdec: use input buffer timings if possible
SVG data may come through multiple buffers, so keep track of the
timestamp of the first buffer, and use it in preference.

https://bugzilla.gnome.org/show_bug.cgi?id=628284
2011-08-23 10:21:04 +02:00
Vincent Penquerc'h
1ed91ad1db kate: do not consider an empty SPU to be a fatal error
Instead, just encode nothing and go on.

https://bugzilla.gnome.org/show_bug.cgi?id=657091
2011-08-23 10:16:30 +02:00
Vincent Penquerc'h
46cfb5fa4f kate: do not clear out high bits from display area
http://dvd.sourceforge.net/spu_notes does not mention that high bits
are to be masked, and not clearing them makes a sample work, where
clearing them yielded left > right.
History from the dvdspu plugin, from where this code was copied,
does not shed any light, as tracing this code's origin shows
the same bitmasks being there in 2007 when it was imported.

https://bugzilla.gnome.org/show_bug.cgi?id=657091
2011-08-23 10:16:22 +02:00
Vincent Penquerc'h
c437541791 dvdspu: do not clear out high bits from display area
http://dvd.sourceforge.net/spu_notes does not mention that high bits
are to be masked, and not clearing them makes a sample work, where
clearing them yielded left > right.
History does not shed any light, as tracing this code's origin shows
the same bitmasks being there in 2007 when it was imported.

https://bugzilla.gnome.org/show_bug.cgi?id=620119
2011-08-23 10:15:27 +02:00
Sebastian Dröge
6edff48378 mpegtsbase: First try if upstream handles seeking in TIME format before seeking in the demuxer 2011-08-23 09:52:20 +02:00
Sebastian Dröge
a27b7b6712 tsdemux: First send SEEKING queries upstream 2011-08-23 09:40:16 +02:00
Sebastian Dröge
ca0df16d52 tsdemux: Send DURATION query upstream first 2011-08-23 09:27:23 +02:00
Sebastian Dröge
20f9738c10 hlsdemux: Use FALSE instead of 0 for a bool parameter 2011-08-23 09:23:33 +02:00