Commit graph

4486 commits

Author SHA1 Message Date
Jimmy Ohn
090d0d1961 decodebin: Modify result of seekable in check_upstream_seekable function
In check_upstream_seekable function, it returns FALSE value even though
we already declare about the seekable variable. So, This patch return
result of seekable in check_upstream_seekable function.

https://bugzilla.gnome.org/show_bug.cgi?id=763975
2016-03-24 14:26:23 +02:00
Vineeth TM
44b70ca3a1 base: use new gst_element_class_add_static_pad_template()
https://bugzilla.gnome.org/show_bug.cgi?id=763075
2016-03-24 14:25:41 +02:00
Sebastian Dröge
9c2d76fb9f decodebin: Shut down all elements explicitly to NULL state before freeing the decode chain
Due to transient locked state during autoplugging, some elements might be
ignored by the GstBin::change_state() and might still be running. Which could
then cause pad-added and similar accessing decodebin state that does not exist
anymore, and crash.

https://bugzilla.gnome.org/show_bug.cgi?id=763625
2016-03-14 17:09:32 +02:00
Sebastian Dröge
65390b5129 multihandlesink: Remove useless streamheader storage
We don't do anything with it but always get them from the caps anyway, so
stop storing them and having complicated logic around that.

https://bugzilla.gnome.org/show_bug.cgi?id=763278
2016-03-14 12:45:33 +02:00
Sebastian Dröge
1d4fb48718 multihandlesink: Only don't send HEADER buffers normally if they are actually streamheaders from the caps
And also consider HEADER buffers without DELTA_UNIT flag as sync points. This
fixes sync-mode=2 with mpegtsmux for example, which has no streamheaders but
puts the HEADER flag on its keyframes.

https://bugzilla.gnome.org/show_bug.cgi?id=763278
2016-03-14 12:45:33 +02:00
Sebastian Dröge
916746e731 decodebin: expose_pad() is always called with lock==TRUE, simplify code
This basically reverts ee44337fc3 .

https://bugzilla.gnome.org/show_bug.cgi?id=763491
2016-03-14 12:45:29 +02:00
Sebastian Dröge
65d09c1495 decodebin: Don't check twice if the decode chain is complete in pad_added_cb()
expose_pad() already does the same.

https://bugzilla.gnome.org/show_bug.cgi?id=763491
2016-03-14 12:45:29 +02:00
Sebastian Dröge
001c7f04a0 decodebin: Don't hold EXPOSE_LOCK in type_found() outside the stream lock
In other places we lock it the other way around, leading to possible
deadlocks. Also this will deadlock if analyze_pad() causes a new element to be
autoplugged that adds new pads on itself when its state is changed.

https://bugzilla.gnome.org/show_bug.cgi?id=763491
2016-03-14 12:45:29 +02:00
Sebastian Dröge
0a434e9c6c tcp: Remove unused file
It's a copy of multihandlesink, but completely outdated. Let's get rid of it
before it gets even more outdated.

https://bugzilla.gnome.org/show_bug.cgi?id=763278
2016-03-14 12:45:16 +02:00
Sebastian Dröge
e2c992de46 Revert "playbin: use avdeinterlace for deinterlacing until deinterlace is ported"
This reverts commit 0615794300.

deinterlace was ported at some point in the last 4 years and has better video
format support, and especially better negotiation than avdeinterlace. Having
avdeinterlace but not deinterlace causes various problems in zerocopy
scenarios.

https://bugzilla.gnome.org/show_bug.cgi?id=760553
2016-03-02 20:47:42 +02:00
Sebastian Dröge
e79749a531 encodebin: Make dispose() function safe to be called multiple times 2016-03-02 18:47:23 +02:00
Tom Deseyn
8c4d3c6aa9 multisocketsink: handle client close correctly and EWOULDBLOCK
Fixes 100% cpu usage when client disconnects. Commit 6db2ee56
would just make multisocketsink ignore reads of 0 bytes without
removing the client, so we'd get woken up over and over again
for the client.

Fix the original issue differently by handling the non-fatal error code.

https://bugzilla.gnome.org/show_bug.cgi?id=761257
https://bugzilla.gnome.org/show_bug.cgi?id=743834
2016-03-01 13:15:38 +00:00
Edward Hervey
27a1fa469c Revert "playsink: Properly mark pending blocked pads"
This reverts commit 62053852de.

The issue that the patch fixes is only noticeable when using decodebin3,
which isn't yet in master.
2016-02-23 09:35:22 +01:00
Tim-Philipp Müller
a62c7bd54c Fix use of undeclared core debug category symbols
libgstreamer currently exports some debug category
symbols GST_CAT_*, but those are not declared in any
public headers.

Some plugins and libgstvideo just use GST_DEBUG_CATEGORY_EXTERN()
to declare and use those, but that's just not right at
all, and it won't work on Windows with MSVC. Instead look
up the categories via the API.
2016-02-20 11:31:43 +00:00
Tim-Philipp Müller
ddfe7a2808 win32: remove outdated build cruft
This hasn't been touched for generations, doesn't work,
and is just causing confusion. We also don't want to
maintain these files manually.
2016-02-20 10:05:17 +00:00
Reynaldo H. Verdejo Pinochet
9cf5645860 typefind: strengthen check for valid H.263 picture layer
Avoids some false positives leading to miss identification:

* Prevent picture start code emulation for the first 2 bytes read
* Add check for valid "picture coding type" and "PB-frames mode" combination

Additionally, change name on confusingly named TR var to what
it is, the layer's PTYPE.

https://bugzilla.gnome.org/show_bug.cgi?id=693263
2016-02-17 11:26:25 -08:00
Vineeth T M
5d78aab810 decodebin: return incomplete topology if decode chains' cap could not be obtained
When getting caps of the decode chain, in get_topology, the caps are being
checked if fixed or not. But get_topology will be called when the decode is
chain is being exposed and hence it will always be fixed. Hence removing the
check for fixed caps. Removing gst_pad_get_current_caps for the chain->pad, as
get_pad_caps will again call the same api.

And get_topology can return NULL value if currently shutting down the
pipeline, which on being passed to create message will result in assertion
error. Check if topology is valid before using it

https://bugzilla.gnome.org/show_bug.cgi?id=755918
2016-02-17 10:48:29 +02:00
Sebastian Dröge
6c2ee2853d decodebin: Fix documentation of the autoplug-query signal 2016-02-15 21:28:33 +02:00
Wim Taymans
9d66b7cdd2 resample: avoid overflows
Avoid overflow in rate calculation. This can cause the resampler to
start on the wrong phase after a rate change.
Avoid overflow in cubic fraction calculation. This can cause noise when
dealing with higher samplerates.
2016-02-11 19:55:08 +01:00
Wim Taymans
188c0811de resample: fix double interpolation sse code
We were only reading 2 filter taps and we need to read 4 to do cubic
interpolation.
2016-02-11 18:03:59 +01:00
Sebastian Dröge
641428966e audiorate: Use gst_audio_format_fill_silence() instead of memset with 0 for generating silence
For unsigned formats, silence is not all bits 0.
2016-01-28 13:29:39 +01:00
Thibault Saunier
135c612550 encodebin: Allow streamheader update when profile.allow_dynamic_output == FALSE
Some encoders can update the stream header through time (for example
vp8 might do that) but it does not strictly changes the output format.
2016-01-27 12:58:23 +01:00
Sebastian Dröge
acd08a828d decodebin: Correctly expose pads from elements that have directly exposable pads
analyze_new_pad() can return a new decode chain, which might have a new
GstDecodePad in the end. We should use those two for expose_pad() and not the
original ones that were passed to analyze_new_pad().

This fails when having a demuxer element that has raw pads immediately or
if a decoder with raw caps is after an adaptive demuxer.

https://bugzilla.gnome.org/show_bug.cgi?id=760949
2016-01-25 13:50:26 +01:00
Mathieu Duponchelle
2717f4a86f streamsynchronizer: Ignore flushing streams [..]
[..] when resetting group start time. In GES, we are usually connected
to the streamsynchronizer on one audio and one video pad.

When seeking the timeline, both nlecompositions often output their flush_start
before any of them has output its flush_stop.

The current code, when receiving the first flush stop was using the
running time of the start of the second composition, which could
be pretty much anything, and means nothing at that point.

This patch is thread-safe, as STREAM_SYNCHRONIZER_LOCK is taken
both when setting flushing and when checking it.

https://bugzilla.gnome.org/show_bug.cgi?id=750013
2016-01-16 11:05:13 +01:00
Sebastian Dröge
fccf83e69f playbin: Only append non-raw and sysmem pad template caps to the autoplug-query result
Otherwise a decoder supporting GL memory will think that all downstream can
support GL memory because of seeing its own template caps.

https://bugzilla.gnome.org/show_bug.cgi?id=758212
2016-01-16 11:05:13 +01:00
Sebastian Dröge
9713ab06cd Revert "playbin: only add the template caps when the result is empty"
This reverts commit 023af2d3b1.

https://bugzilla.gnome.org/show_bug.cgi?id=758212
2016-01-16 11:05:13 +01:00
Edward Hervey
62053852de playsink: Properly mark pending blocked pads
When blocking input pads, we also need to properly set the appropriate
pending flag.

Without this, when switching stream types after initial configuration
(like going from Audio+Video to Audio+Video+Sub) playsink would never
wait for *all* input streams to be blocked (it would just wait for the
new input pad (text in this case) to be blocked).

Since the reconfiguration might introduce unlinking/relinking of elements,
we need to ensure that *ALL* input streams are blocked.

Failure to do so would result in having some input streams pushing data
to inactive elements (returning GST_FLOW_FLUSHING) or unlinked pads
(returning GST_FLOW_NOT_LINKED).

A later optimization could involve only blocking the input pads that
might be involved in reconfiguration. But better be safe than sorry for
now :)
2016-01-15 10:05:58 +01:00
Thiago Santos
0d18717912 subtitleoverlay: replace gst_caps_can_intersect() with is_subset()
Subset check verifies also that all required fields are present
and is mostly commonly used when checking if an element accepts
a certain caps
2016-01-13 16:32:25 -03:00
Thiago Santos
81c52aaa16 playbin: use subset check instead of intersect
Elements usually require that all fields on their caps are present
on the fixed caps they receive. Using intersection won't verify it,
resort to using is_subset() checks.

https://bugzilla.gnome.org/show_bug.cgi?id=760477
2016-01-13 15:29:17 -03:00
Thiago Santos
20f6af651b subtitleoverlay: replace accept-caps with caps query
Those accept caps are actually checking if downstream supports
some particular caps to check if it need to negotiate a different
format. Checking only the next element with accept-caps is not enough
to guarantee that it is supported.

Using a caps query makes it obtain the supported caps for downstream
as a whole instead of only the next element.
2016-01-11 18:35:29 -03:00
Thiago Santos
5ef0a09794 videorate: replace accept-caps with a caps query
accept-caps is only a shallow check, it needs to know
whether downstream as a whole accepts the framerate
2016-01-08 15:05:38 -03:00
Wim Taymans
85afad72ec audio-converter: small API tweaks
Pass flags in _converter_new() so that we can configure ourselves
differently depending on some options.
SOURCE_WRITABLE -> IN_WRITABLE because the array is called 'in'
2016-01-08 17:34:50 +01:00
Wim Taymans
980163457e audio-convert: simplify API
Simplify the API, we don't need the consumed and produced output
arguments. The caller needs to use the _get_in_frames/get_out_frames API
to check how much input is needed and how much output will be produced.
2016-01-08 17:19:58 +01:00
Sebastian Dröge
844aa3e6a9 playbin: Use the caps query instead of accept-caps to detect if a sink accepts caps
accept-caps is only for one element, caps query is recursive. Fixes playback
with totem and other situations.

https://bugzilla.gnome.org/show_bug.cgi?id=760234
2016-01-08 16:32:32 +02:00
Aurélien Zanelli
9b9f913809 videotestsrc: add missing break in set_property switch case
To avoid future issue when adding new properties.

https://bugzilla.gnome.org/show_bug.cgi?id=760204
2016-01-06 13:21:06 +02:00
Sebastian Dröge
eb09889176 audioconvert: Pass pointer arrays instead of singleton pointers to gst_audio_converter_samples()
In this specific case it wouldn't cause problems as we only ever access the
first array element, but let's make explicit what is happening here.

CID 1346530 and 1346529
2015-12-29 18:14:54 +02:00
Sebastian Dröge
0416f121f2 typefindfunctions: Make sure that enough data is available in AAC/ADTS typefinder
We would otherwise read beyond the array bounds and crash every now and then.
This was introduced with 5640ba17c8.

https://bugzilla.gnome.org/show_bug.cgi?id=759910
2015-12-28 13:51:02 +02:00
Sebastian Dröge
6a57399270 playsink: Don't leak audio/video filters due to floating references weirdness
The filters' floating references are sinked during set_property() already,
which means that GstBin takes a new reference when adding the filter to it.
Get rid of the additional reference after adding the filter to the bin.
2015-12-25 11:34:10 +01:00
Sebastian Dröge
a136ac0e2f playsink: Allow reuse of audio/video filters by unparenting them from their bins
And also recreate the chains if the filter is changing.
2015-12-25 10:36:44 +01:00
Sebastian Dröge
24181db083 playsink: Don't leak audio/video filters when using non-raw media 2015-12-25 10:28:02 +01:00
Matthew Waters
023af2d3b1 playbin: only add the template caps when the result is empty
Unconditionally adding the template caps when proxying the caps query will play
havoc with decoders that attempt to choose an output format based on some caps
features.  Creating a sink that does not include those caps features and a
decoder/parser/etc that preferentially chooses some specific caps feature when
available, will always return the decoder/parser/etc template caps and choose a
feature that downstream will be unable to support.

Fix by limiting the addition of the template caps to when the result is actually
empty.

https://bugzilla.gnome.org/show_bug.cgi?id=758212
2015-12-18 21:55:00 +11:00
Sebastian Dröge
60bad4815d Revert "decodebin2: fix deadlock on chain shutdown"
This reverts commit 77dc09c3a9.

It can cause the FLUSH_START/STOP events to go to the sink elements, which
then causes state changes and various other problems. We shouldn't really
flush downstream here, the idea is to do *draining*.

Apart from that the testcase for the original bug here works without this
commit now.
2015-12-16 17:09:25 +01:00
Luis de Bethencourt
29cfb9a6d7 multifdsink: fix typo in GST_WARNING_OBJECT
This should make easier to parse the debug logs.
s/fnctl/fcntl
2015-12-16 11:12:03 +00:00
Vincent Penquerc'h
033ce9b20d videorate: remove dead code
Since the loops increasing count from 0 are always run at least
once (if count < 1), count will always be at least one when
compared to the drop/dup conditions.

Coverity 1139674
2015-12-16 11:00:22 +00:00
Wim Taymans
8bcf183c7f audioconvert: clear convert object 2015-12-16 11:13:15 +01:00
Wim Taymans
f5a3f70571 audio: adapt API for non-interleaved formats
Allow an array of sample blocks to be passed to the channel mix and
quantizer functions to support non-interleaved formats.
2015-12-14 09:16:08 +01:00
Wim Taymans
9c2bcd7b76 multisocketsink: add GstNetworkMessage event
Add a property and logic to send a GstNetworkMessage event containing
the message that was received from a client. This can be used to
implement simply bidirectional communication.
2015-12-10 12:44:42 +01:00
Wim Taymans
9aaaa26ff3 multisocketsink: add dispatched event
Add a property and logic to send a GstNetworkMessageDispatched
event upstream to notify that a buffer has been sent. This can be used
to keep track of what client received what buffers.
2015-12-10 12:44:42 +01:00
Wim Taymans
0e1a858d89 socketsrc: handle GstNetworkMessage events
Add a property to handle GstNetworkMessage events. These events contain
a buffer that is sent on the socket to allow for simple bidirectional
communication.
2015-12-10 12:44:42 +01:00
Wim Taymans
5e55968546 audio-convert: improve converter API
Improve the converter API to allow for an max input and output number of
samples and return the number of consumed/produced samples.
2015-12-09 17:16:26 +01:00
Wim Taymans
1da5a3ab66 multisocketsink: let downstream know we support metadata
Let downstream know that we support GstNetControlMessage metadata API.
2015-12-04 12:25:11 +01:00
Tim-Philipp Müller
71505dfa24 decodebin2: fix "Attempt to unlock mutex that was not locked"
Introduced in commit ee44337f, caused the decodebin
test_text_plain_streams unit test to abort.

https://bugzilla.gnome.org/show_bug.cgi?id=752651
2015-12-02 18:16:05 +00:00
Edward Hervey
d292ed48c5 playback: Expose XSUB formats by default
This is a workaround, we should remove this once we have a proper
decoder
2015-12-02 16:37:50 +01:00
Edward Hervey
c79bf13bc2 streamsynchronizer: Rename GstStream => GstSyncStream
Avoid clashes with future GstStream from core
2015-12-02 16:37:41 +01:00
Sebastian Dröge
9e4bf58b8e decodebin: Update buffering messages when removing an element that had buffering pending
Otherwise we'll remove that element while keeping its buffering message in our
list, and because of that never ever report buffering 100% as that element
will always be at a lower percentage.

This fixes e.g. seeking over Period boundaries in DASH and various other
issues when buffering happens between group switches.

Also use a new mutex for protecting the buffering messages. The object lock is
already used by gst_object_has_as_ancestor() and we need to use it now for
checking if the buffering message sender has the to-be-removed element as
ancestor.
2015-12-02 16:16:22 +02:00
Wim Taymans
01f5ca3da8 multisocketsink: keep on reading when we stop sending
When we stop sending because we need more data, still keep a GSource
around to receive data from the clients.
Also handle read and write in the same go.
2015-12-02 10:26:03 +01:00
Thomas Bluemel
2c62aad159 [PATCH] Fix a race condition accessing the decode_chain field.
Make sure that any access to the GstDecodeBin's decode_chain
field is protected using the EXPOSE_LOCK.  Also add a simple
reference counter to the GstDecodeChain structure so that when
the type_found signal fires it can hold onto the decode chain
even while the EXPOSE_LOCK is not held.  This should fix a
race condition if the type_found signal fires right in the
middle of a state change that messes with the same decode
chain.

https://bugzilla.gnome.org/show_bug.cgi?id=755260
2015-12-01 17:36:31 +00:00
Vincent Penquerc'h
870c6df489 decodebin: early out on pad-added when the pad is inactive
The pad may be recently deactivated if the element is switched
back down very quickly.

https://bugzilla.gnome.org/show_bug.cgi?id=752651
2015-12-01 17:36:31 +00:00
Vincent Penquerc'h
ee44337fc3 decodebin: lock the expose lock around decode_chain use
Helps with a crash in decodebin when quickly switching states.

https://bugzilla.gnome.org/show_bug.cgi?id=752651
2015-12-01 17:36:31 +00:00
Wim Taymans
ff6d1a2a25 audio-converter: add output size argument
Make it possible to have a different number of output samples than input
samples when we, for example, want to add resampling later.
2015-11-10 09:53:59 +01:00
Edward Hervey
d0eface01c decodebin: Properly deactivate ghostpads
Just setting the ghostpad as flushing wasn't enough. It needs to be
consistent on the internal proxypad also, otherwise you end up in
situations where:
* a pending buffer on the target pad triggers the sticky event
  propagation
* the default implementation sees that the proxypad is not flushing,
  so it tries to push it to the other pad (the actual ghostpad)
* the ghostpad is flushing, so returns FALSE
* the push_event function sees that pushing the event failed...
* ... and pending buffer push returns GST_FLOW_ERROR, instead of
  GST_FLOW_FLUSHING

By using gst_pad_set_active(FALSE), we ensure that both the ghostpad
and the proxypad are flushing/deactivated. The situation above will
no longer occur, and a GST_FLOW_FLUSHING will be returned.
2015-11-06 19:38:13 +01:00
Tim-Philipp Müller
d2e210bbea audioconvert: fix build
Don't include file that is no longer generated, and remove some
files that are no longer needed because they have moved into the
lib. Fixes distcheck.
2015-11-06 18:12:28 +00:00
Wim Taymans
e3f0f3b91e audio-converter: move audio converter to audio libs
Move the audio-converter helper to the audio library.
2015-11-06 17:53:22 +01:00
Wim Taymans
dfa25a40fc audio-channel-mix: move channel mixer to audio libs
Move the channel mixer code to the audio library
2015-11-06 17:39:33 +01:00
Wim Taymans
b8bea9d8be audio: add debug categories 2015-11-06 17:29:22 +01:00
Wim Taymans
268ed5dd6f channelmix: don't limit channelpositions
Don't set a limit on the channel positions, just like the metadata.
2015-11-06 16:42:35 +01:00
Wim Taymans
9fbe0386d0 channelmix: simplify API a little
Remove the format and layout from the mix_samples function and use the
format when creating the channel mixer object. Also use a flag to handle
the unlikely case of non-interleaved samples like we do elsewhere.
2015-11-06 16:03:20 +01:00
Wim Taymans
7f5104f52f channelmix: GstChannel -> GstAudioChannel
Rename GstChannel to GstAudioChannel
2015-11-06 15:50:34 +01:00
Wim Taymans
1635bc0a45 audioconvert: cleanups and add some docs
Add docs for the internal audioconvert object before moving it to the
audio library.
Remove get_sizes and implement the trivial logic in the element.
Remove some unused orc functions
2015-11-06 12:46:36 +01:00
Wim Taymans
c36ac3ce45 audioconvert: move audio quantize code to libs
Move the audio quantize code from audioconvert to the audio library.
work on making an audio converter helper function similar to the video
converter.
Fold fastrandom directly into the quantizer, add some ORC code to
optimize this later.
2015-11-06 12:10:48 +01:00
Wim Taymans
a7789854d5 audio-channels: rename get_default_mask
Rename _get_default_mask() to _get_fallback_mask() to make it more
clear that the function only provides a fallback if nothing else can be
done. Also clarify this in the documentation.

API: gst_audio_channel_get_fallback_mask()
2015-11-05 12:50:18 +01:00
Thibault Saunier
9c7d3c8ab2 volume: Do not try to get binding value array if we are not processing any sample
In some conditions we might process empty buffers, calling
gst_control_binding_get_value_array in that case will lead
to the assertion:

  (lt-ges-launch-1.0:18859): GStreamer-CRITICAL **: gst_control_binding_get_value_array: assertion 'values' failed
2015-11-05 11:44:31 +01:00
Wim Taymans
f86ed8cdf6 audio-channels: make method to get default channel-mask
Add a new method to get the default channel-mask.
Use the new method on audiodecoder and audioconvert.

API: gst_audio_channel_get_default_mask()
2015-11-05 10:52:53 +01:00
Wim Taymans
801f7ca464 audio-format: add TRUNCATE_RANGE flag
Add a TRUNCATE_RANGE flag for unpack functions to fill the least
significate bits with 0 (as did the old code). Also add functions
that don't truncate. Use the TRUNC flag in audioconvert for
backwards compatibility for now.
2015-11-03 12:12:08 +01:00
Wim Taymans
9e15c89564 audioconvert: change multiplier for int<->float conversion
Use (1 << 31) as the multiplier for int<->float conversions. This makes
sure that int->float conversions always end up with floats between
[-1.0, 1.0].
For the conversion from float to int, this multiplier will give the complete
int range after we perform clipping.
Change the unit test to take this into consideration.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=755301
2015-11-03 12:12:08 +01:00
Wim Taymans
bd89f2430b audiotestsrc: increase freq limit
Raise the frequency limit and try to negotiate to a samplerate of 4*freq
when larger then the default samplerate.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=754450
2015-11-02 15:54:19 +01:00
Wim Taymans
c688eb0d88 audiotestsrc: add support for unlimited number of channels
Raise the channel limit and set the channel-mask for > 2 channels.
2015-11-02 15:46:22 +01:00
Wim Taymans
b0bf294a62 audiotestsrc: add support for all formats
Use the pack functions to also support the other audio formats we
have.
2015-11-02 13:22:18 +01:00
Sebastian Dröge
e51c9a3dad audioresample: Clip input buffers to the segment before handling them
https://bugzilla.gnome.org/show_bug.cgi?id=757068
2015-11-02 10:20:37 +02:00
Sebastian Dröge
000c424835 audioconvert: Clip input buffers to the segment before handling them
https://bugzilla.gnome.org/show_bug.cgi?id=757068
2015-11-02 10:20:37 +02:00
Tim-Philipp Müller
3dd26bb9e8 audioconvert: update orc backup code to fix build without orc 2015-11-01 23:06:11 +00:00
Csaba Toth
3159501002 multisocketsink: fix "client-removed" signal on 64-bit platforms and with bindings
The client-removed signal used G_INT_TYPE instead of G_SOCKET_TYPE
in its definition leading to problems on platforms where the size
of a pointer is larger than the size of an integer, It would also
not work at all with dynamic language bindings.

https://bugzilla.gnome.org/show_bug.cgi?id=757155
2015-10-31 11:12:38 +00:00
Joan Pau Beltran
a95a900c21 videotestsrc: fix handling of Bayer format 'gbrg'
Due to a typo, videotestsrc did not handle the Bayer
format 'gbrg' properly and reported it as invalid,
causing negotiation errors.

https://bugzilla.gnome.org/show_bug.cgi?id=757264
2015-10-30 20:29:04 +00:00
Wim Taymans
5cf367ae57 audioconvert: rework audioconvert
Rewrite audioconvert to try to make it more clear what steps are
executed during conversion.
Add passthrough step that just does a memcpy when possible.
Add ORC optimized dither and quantization functions.
Implement noise-shaping on S32 samples only and allow for arbitrary
noise shaping coefficients if we want this later.
2015-10-30 17:51:47 +01:00
Wim Taymans
e1569ce76a channelmix: fix up API a little
don't use gpointer * for something that should be gpointer.
2015-10-30 17:51:47 +01:00
Wim Taymans
26d469a04b audioquantize: make helper for add with saturation 2015-10-30 17:51:47 +01:00
Wim Taymans
cd6c29e071 audioconvert: make the quantizer a reusable object
Turn the quantizer into a reusable object.
2015-10-28 11:36:18 +01:00
Wim Taymans
8fc2569328 audioconvert: make the channel mixer a separate reusable object
A first attempt at making the channel mixer a separate object.
2015-10-28 11:36:18 +01:00
Wim Taymans
8d4cd51e59 audioquantize: fix 8-pole noise shaping
Fix the 8-pole noise shaping error update. We were mixing errors from
different channels.
2015-10-28 11:36:18 +01:00
Sebastian Dröge
36b80edb72 decodebin: Send SEEK events directly to adaptive streaming demuxers
This makes sure that they will always get SEEK events, even if we're currently
in the middle of a group switch (i.e. switching to another
representation/bitrate/etc).

https://bugzilla.gnome.org/show_bug.cgi?id=606382
2015-10-27 15:50:45 +02:00
Guillaume Desmottes
7d6b6b0313 decodebin: fix event leak
As stated in GST_PAD_PROBE_HANDLED's documentation, we are
supposed to unref the event before returning.

Fixes an event leak in the validate.hls.playback.play_15s.hls_bibbop
validate scenario.

https://bugzilla.gnome.org/show_bug.cgi?id=754459
2015-10-25 11:18:29 +00:00
Sebastian Dröge
b4afaee8c0 audioconvert: Update disted orc files 2015-10-23 19:13:05 +03:00
Wim Taymans
2b626a5adf audioconvert: use pack/unpack functions
Rework the converter to use the pack/unpack functions
Because the unpack functions can only unpack to 1 format, add a separate
conversion step for doubles when the unpack function produces int.
Do conversion to S32 in the quantize function directly.
Tweak the conversion factor for doing float->int conversion slightly to
get the full range of negative samples, use clamp to make sure we don't
exceed our int range on the positive axis (see also #755301)
2015-10-23 16:58:17 +02:00
Sebastian Dröge
53f135cec7 playbin: Send upstream events directly to playsink
Send event directly to playsink instead of letting GstBin iterate
over all sink elements. The latter might send the event multiple times
in case the SEEK causes a reconfiguration of the pipeline, as can easily
happen with adaptive streaming demuxers.

What would then happen is that the iterator would be reset, we send the
event again, and on the second time it will fail in the majority of cases
because the pipeline is still being reconfigured
2015-10-23 12:02:28 +03:00
Thibault Saunier
ab6b536a66 videotestsrc: Force alpha downstream if foreground color contains alpha
Otherwise the foreground color won't be fully represented in the
outputted frames.

https://bugzilla.gnome.org/show_bug.cgi?id=755482
2015-10-22 11:12:23 +02:00
Matthew Waters
44871680f0 decodebin: track the exposable pads through connect_pad
The logic introduced by
[d50b713: decodebin: set the decode pad target before setting elements to PAUSED]
to expose pads would only ever be able to possibly expose one (the last) pad per element.

Make it so that any exposable pads are able to be exposed rather than just the
last pad returned by connect_element.

https://bugzilla.gnome.org/show_bug.cgi?id=742924
2015-10-20 10:48:05 +03:00
Matthew Waters
94d81fc713 decodebin: return the possibly new chain in analyze_new_pad
In the case of analyzing a demuxer chain, analyze_new_pad may create
a new GstDecodeChain.  This was not propagated to the calling function which as
of [d50b713f decodebin: set the decode pad target before setting elements to PAUSED]
is now required to be able to expose the correct pad.

https://bugzilla.gnome.org/show_bug.cgi?id=742924
2015-10-20 10:47:45 +03:00
Rajat Verma
68ec631db7 playsink: relink text_pad in case of reconfiguration
In case of reconfiguration, text_pad should be re-connected with
stream synchronizer sink pad. Otherwise we'll leave an unlinked pad around if
there always was a streamsynchronizer text pad.

https://bugzilla.gnome.org/show_bug.cgi?id=756804
2015-10-20 10:37:04 +03:00
Sebastian Dröge
4d6aa0f831 decodebin/playbin/playsink/subtitleoverlay: Post async-done on state change failures
https://bugzilla.gnome.org/show_bug.cgi?id=756611
2015-10-19 11:06:25 +03:00
Sebastian Dröge
87dbe54797 playsink: Immediately error out if state change fails
Otherwise we chain up to the parent class' change_state function and might
override the failure with SUCCESS.

https://bugzilla.gnome.org/show_bug.cgi?id=756611
2015-10-19 11:06:25 +03:00
Sebastian Dröge
92061cb19e playbin/uridecodebin: Always post async-done immediately if we're a live pipeline
Not only if the base class told us, but also if one of our own elements did.

https://bugzilla.gnome.org/show_bug.cgi?id=756611
2015-10-19 11:06:25 +03:00
Matthew Waters
d50b713f44 decodebin: set the decode pad target before setting elements to PAUSED
Otherwise caps and context queries will disappear into nothing and therefore
fail.  With autoplug-query now actually working, users (such as playbin) can
proxy these queries to the selected video sink and be able to select an
more appropriate configuration.

https://bugzilla.gnome.org/show_bug.cgi?id=731204
2015-10-19 11:55:04 +11:00
Vineeth TM
b424bc2e4f playsink: Fix volume element leak
In case sink implements a streamvolume interface, volume element is being got
from the sink. But this is transfer full. So the memory should be freed before
setting it to NULL. This was resulting in major memory leaks

https://bugzilla.gnome.org/show_bug.cgi?id=755867
2015-10-15 09:42:21 +03:00
Vineeth T M
a1d84edd16 videorate: remove unnecessary break statement
Trivial patch to remove unncessary break statement used after
goto statement.

https://bugzilla.gnome.org/show_bug.cgi?id=754054
2015-10-02 17:27:13 +03:00
Mathieu Duponchelle
0c0f803488 encodebin: Fix special case
Allows to run such a command line :

gst-launch-1.0 uridecodebin uri=file:///home/meh/Music/sthg.mp4 ! \
encodebin profile-string="audio/x-wav|1" ! filesink location=sthg.wav

Previously the code failed because wavenc is considered as a muxer.
We still want encodebin to audio/x-wav as an AudioEncodingProfile,
so this simple fix allows that.

Ability to mux raw streams in containers such as matroskamux
is a different issue.

https://bugzilla.gnome.org/show_bug.cgi?id=751470
2015-10-02 17:25:48 +03:00
Rajat Verma
267f4c2bad decodebin: free hidden groups at time of switching groups
hidden groups should be freed at time of switching groups to avoid memory use
from balloning up.

https://bugzilla.gnome.org/show_bug.cgi?id=755770
2015-10-02 17:02:21 +03:00
Jan Schmidt
3f7138a6e4 videotestsrc: Don't fixate framerate if downstream didn't provide one
intersection with a downstream that accepts any video/x-raw caps
with no further detail won't create a framerate field. If it's
not in the caps, don't fixate it, just set it to 30/1
2015-10-02 15:05:26 +10:00
Tim-Philipp Müller
fb30c04145 typefinding: minor clean-up
Remove unnecessary brackets from IS_MPEGTS_HEADER macro.
2015-10-01 12:49:59 +01:00
Pankaj Darak
eaf4ce01d3 typefinding: mpeg-ts detection improvement
Allow AFC to be 0 for null pid packets.

https://bugzilla.gnome.org/show_bug.cgi?id=726117
2015-10-01 12:32:33 +01:00
Tim-Philipp Müller
7fb9cd453b subparse: detect closing tags even if there's a space after the slash
</ i> should be handled like </i>

https://bugzilla.gnome.org/show_bug.cgi?id=755875
2015-09-30 18:17:13 +01:00
Vineeth T M
060f0c21f2 audiosink, multisocketsink: Fix error leak during failures
https://bugzilla.gnome.org/show_bug.cgi?id=755143
2015-09-17 11:59:35 +02:00
Sebastian Dröge
2a1e046dd9 uridecodebin: Use the correct caps name for MS Smooth Streaming manifests
Thanks to John Chang <r97922153@gmail.com> for reporting.

https://bugzilla.gnome.org/show_bug.cgi?id=755098
2015-09-16 19:54:43 +02:00
Sebastian Dröge
35cb3b0c57 playback: Add POINTER_TO_ULONG() macro for consistency 2015-09-11 23:29:57 +02:00
Kouhei Sutou
ab64b00b48 playback: fix build error for 64bit Windows build by MinGW
Casting to gpointer from gulong generates the following warning with
64bit Windows target MinGW:

    gstplaybin2.c: In function 'pad_added_cb':
    gstplaybin2.c:3476:7: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast]
           (gpointer) group_id_probe_handler);
           ^
    cc1: all warnings being treated as errors

We should cast to guintptr from gulong before we cast to gpointer.

https://bugzilla.gnome.org/show_bug.cgi?id=754755
2015-09-11 23:28:07 +02:00
Wim Taymans
3d733ad09f videoscale: fix gamma-decode option
We need to use the enum to configure the option now.
2015-09-03 17:56:05 +02:00
Thiago Santos
76d26a60bd playsinkconvertbin: implement accept-caps handler
The default one will just go through the internal elements which might
just be identity when it is in passthrough which will lead to the query
being handled by the downstream sink, ignoring all that playsinkconvertbin
could actually handle and convert.

https://bugzilla.gnome.org/show_bug.cgi?id=754235
2015-08-28 09:44:10 -03:00
Eunhae Choi
b1f78b5d23 subparse: use g_clear_error instead of g_error_free
To avoid invalid pointer accees the err pointer should be set to NULL.
By using g_clear_error() it calls free and clear the pointer.

https://bugzilla.gnome.org/show_bug.cgi?id=753817
2015-08-19 16:21:25 +03:00
Sebastian Dröge
2727ca01f5 Revert "decodebin: Handle the preroll multi-queue size"
This reverts commit 5c8ef0ea05.
2015-08-18 18:47:22 +03:00
Sebastian Dröge
4fe4357188 Revert "decodebin: Store extra_buffer_required per group, not globally"
This reverts commit 1ea81114ea.
2015-08-18 18:47:21 +03:00
Sebastian Dröge
970bc16bf8 Revert "decodebin: If extra buffers are going to be required, we're still prerolling"
This reverts commit a3b24f0241.
2015-08-18 18:47:18 +03:00
Sebastian Dröge
a3b24f0241 decodebin: If extra buffers are going to be required, we're still prerolling 2015-08-18 15:19:03 +03:00
Sebastian Dröge
1ea81114ea decodebin: Store extra_buffer_required per group, not globally
It's only relevant for each group, and by storing it in the group
we have locking and everything else like for the other buffering-related
variables. Locking looks a bit fishy still, but it was like that for a long
time already so shouldn't be worse than before.
2015-08-18 15:19:03 +03:00
Myoungsun Lee
5c8ef0ea05 decodebin: Handle the preroll multi-queue size
Overview:
There are some of interleaved streams which has long-term location of audio data.
It mean the audio data is located far away more than multiqueue size.
In this case, because of multiqueue overrun, the pipeline is stopped.
To prevent hanging-like state, the decodebin needs to handle the queue size.

Caused:
The multiqueue size is not enough, the pipeline will stay being stalled status
and decodebin cannot complete to build decode chain.
In this issue file, decodebin did not receive no_more_pads signal or audio data yet.

Steps to Reproduce:
play the high-resolution(4K file) files or some streaming media(push mode).

Actual Results:
There is no audio or subtitle.
We can see only video or infinite loading.

Resolution:
Decodebin detect this problem, and add extra buffer size to multiqueue.
The multiqueue is larger than before, the next data can be pushed the downstream element.

Additional Information:
The max-preroll extra buffer size is set 8MB.
We can use total pre-roll buffer 10MB.
Only first overrun callback can handle multiqueue size.

https://bugzilla.gnome.org/show_bug.cgi?id=733235
2015-08-18 15:19:02 +03:00
Sebastian Dröge
8a736f6e98 typefindfunctions: Add typefinder for TTML+XML
Used in DASH among other things, as SMPTE Timed Text.
2015-08-18 12:56:33 +03:00
Edward Hervey
7fc856ff5c decodebin: Fix list iteration
We were using the wrong variable ...

CID #1316477
2015-08-16 12:53:23 +02:00
Edward Hervey
eaf9ca90c7 decodebin2: Handle flushing with multiple decode groups
When an upstream element wants to flush downstream, we need to take
all chains/groups into consideration.

To that effect, when a FLUSH_START event is seen, after having it
sent downstream we mark all those chains/groups as "drained" (as if
they had seen a EOS event on the endpads).

When a FLUSH_STOP event is received, we check if we need to switch groups.
This is done by checking if there are next groups. If so, we will switch
over to the latest next_group. The actual switch will be done when
that group is blocked.

https://bugzilla.gnome.org/show_bug.cgi?id=606382
2015-08-15 18:50:06 +02:00
Edward Hervey
2d3743e37d decodebin2: Forward event/queries for unlinked groups
When upstream events/queries reach sinkpads of unlinked groups (i.e.
no longer linked to the upstream demuxer), this patch attempts to find
the linked group and forward it upstream of that group.

This is done by adding upstream event/query probes on new group sinkpads
and then:
* Checking if the pad is linked or not (has a peer or not)
* If there is a peer, just let the event/query follow through normally
* If there is no peer, we find a pad to which to proxy it and return
  GST_PROBE_HANDLED if it succeeded (allowing the event/query to be properly
  returned to the initial called)

Note that this is definitely not thread-safe for the time being

https://bugzilla.gnome.org/show_bug.cgi?id=606382
2015-08-15 18:50:06 +02:00
Jan Schmidt
f188a023c7 typefind: Make the H.264 typefind a tiny bit more lenient.
When we see prefix NALs before a Subset SPS has been spotted,
it might just be because the stream was truncated at the
start, so don't count those as either 'bad' or 'good' packets.
2015-08-15 12:14:56 +10:00
Thiago Santos
052d1c7b8b playsinkconvertbin: remove accept-caps handling
Just let the internal element of the bin do it instead of forcing a
caps query to do it.
2015-08-14 05:48:31 -03:00
Thiago Santos
909f494a5a videorate: fixate the pixel-aspect-ratio
If the pixel-aspect-ratio is not fixed, try to get it as close
to 1/1 as possible

https://bugzilla.gnome.org/show_bug.cgi?id=748635
2015-08-13 14:11:37 -03:00
Joan Pau Beltran
5070d6367e videorate: add support for bayer formats
Since the videorate element just duplicates or drops frames
to achieve the desired framerate, it can accept video/x-bayer media
(in any format), which are not present in the current caps.
Just add "video/x-bayer(ANY);" to the caps of the static pad template
(fixing line style to pass the indent commit hook).

https://bugzilla.gnome.org/show_bug.cgi?id=753483
2015-08-10 17:21:03 -04:00
Vineeth TM
0a3fe31f26 decodebin: fix deadend_details string leak
deadend_details need not be returned when the pad is not a deadend.
Hence checking if res value is TRUE and clearing the string instead of
passing it on

https://bugzilla.gnome.org/show_bug.cgi?id=753088
2015-08-05 14:33:35 -03:00
Nicolas Dufresne
7db376d05e videotestsrc: Don't set DTS on buffer
DTS is for encoded data and have no meaning for raw. It better to not
set it, as it's confusing.

https://bugzilla.gnome.org/show_bug.cgi?id=752791
2015-08-04 18:00:35 -04:00
Ville Skyttä
04e3fc3f33 typefind: Treat *.umx (Unreal Music Package) as audio/x-mod
https://bugzilla.gnome.org//show_bug.cgi?id=752436
2015-07-22 12:59:03 +01:00
Tim-Philipp Müller
39576545b7 typefindfunctions: add DASH MPD typefinder
Moved from dashdemux plugin in -bad.
2015-07-16 21:26:30 +01:00
Tim-Philipp Müller
6020b0cf2b Update mailing list address from sourceforge to freedesktop 2015-07-16 17:17:16 +01:00
Wim Taymans
14083178b8 video: improve logging
Add logging categories for most video objects.
Remove some useless debug lines in video-info and videotestsrc.
Add a performance debug line in the video scaler.
2015-07-15 12:47:42 +02:00
Wim Taymans
2b2766494b socketsrc: add caps property
Add caps property that allows the src to easily negotiate a format.
2015-07-14 16:01:10 +02:00
Thiago Santos
9c2e08c54d decodebin: only try to expose complete groups
When switching to a new chain it might be that this new chain
is not yet ready to be exposed so check it before exposing.

Can happen with mpegts that might delay adding pads or pushing data
until it has found the PMT/PAT/PCR and that may take a while depending
on the stream.

It happened frequently with HLS:
http://vevoplaylist-live.hls.adaptive.level3.net/vevo/ch1/appleman.m3u8
2015-07-14 00:11:59 -03:00
Thiago Santos
1d1bebd769 decodebin: fix typo
Hided -> hid
2015-07-14 00:11:59 -03:00
Sebastian Dröge
f99a24f8b3 playsink: Require the streamvolume interface on the sink when using the sink's volume/mute properties
If the sink has properties named volume and mute, we have no idea about their
meaning. The streamvolume interface standardizes the meaning.

In the case of osxaudiosink for example, the current volume property has a
range of 0.0 to 1.0, but we need 0.0 to 10.0 or similar. Also osxaudiosink
has no mute property. As such, the volume element should be used here instead.

https://bugzilla.gnome.org/show_bug.cgi?id=752156
2015-07-10 11:55:23 +03:00
Thiago Santos
822b1d4511 typefind: also check moof to recognize video/quicktime
Helps recognizing fragmented files with the right type
2015-07-06 10:07:38 -03:00
Stefan Sauer
75cc08d451 docs: order and canonicalize the -sections.txt file
Have all sections in alphabetical order. Also make the macro order consistent.
This is a preparation for generating the file. Remove GET_CLASS macro for
some elements, since it is not used and the header is not installed.
2015-07-03 21:16:27 +02:00
Stefan Sauer
68c5adec38 videoscale: fix debug categories
Use a local category for the default category and fix the import for the
performance category.
2015-07-03 21:08:03 +02:00
danny song
49d0083456 playbin: remove unnecessary break
https://bugzilla.gnome.org/show_bug.cgi?id=751690
2015-06-29 19:55:34 -03:00
Sebastian Dröge
c5dbee33b0 audioresample: Also copy metas if their API has no tags attached to it
This is the default basetransform behaviour, being more strict than that
is not really useful.
2015-06-29 13:06:59 +02:00
Sebastian Dröge
010e35afa7 audioconvert: Also copy metas if their API has no tags attached to it
This is the default basetransform behaviour, being more strict than that
is not really useful.
2015-06-29 13:06:49 +02:00
Song Bing
d2e942ac02 streamsynchronizer: Unblock EOS wait when track switching.
sink_event () will blocked on EOS event. which will cause can't
send event when switch EOS track to non-EOS one.

https://bugzilla.gnome.org/show_bug.cgi?id=750761
2015-06-23 15:28:49 +02:00
Sebastian Dröge
bd508a343f streamsynchronizer: Don't wait for sparse streams when doing stream switches
Their stream-start event might come a bit later, like just before the first
buffer... and queues might run full before that happens.
2015-06-22 20:54:18 +02:00
Sebastian Dröge
152534611d streamsynchronizer: Add some more debug output 2015-06-22 20:29:52 +02:00
Sebastian Dröge
203b635d0c streamsynchronizer: Reset group start time when flushing
We reset the group start time to the running time of the start of the other
streams that are not flushed. This fixes seeking in gapless mode after the
first track has played.

https://bugzilla.gnome.org/show_bug.cgi?id=750013
2015-06-22 20:17:56 +02:00
Sebastian Dröge
ab79e50510 playbin: Reset suburi also when receiving an error message from the sub uridecodebin
http://bugzilla.gnome.org/show_bug.cgi?id=751118
2015-06-22 14:51:07 +02:00
Brijesh Singh
bcc9021071 playbin: free group->suburi on failure
If suburidecodebin is failed to negotiate (e.g file does not exist)
then free internal suburi variable so that 'current-suburi' property
returns correct status.

https://bugzilla.gnome.org/show_bug.cgi?id=751118
2015-06-22 14:48:42 +02:00
Tim-Philipp Müller
f5ad17871c typefinding: check for full UTF-8 BOM in MSS typefinder
https://bugzilla.gnome.org/show_bug.cgi?id=750802
2015-06-11 23:33:30 +01:00
Philippe Normand
d182e66bce typefindfunctions: UTF-8 MSS Manifest detection support
Check if the first bytes of data contain an UTF-8 BOM.

https://bugzilla.gnome.org/show_bug.cgi?id=750802
2015-06-11 19:46:02 +02:00
Sebastian Dröge
9c47e7d5e6 playbin: Check in autoplug_continue against the subtitle factory caps correctly
6a2f017bfa changed it to check the subtitle
factory caps if there is a text-sink but we fail to get its sinkpad. What
actually should be done here is to use the factory caps if there is no
text-sink at all.

https://bugzilla.gnome.org/show_bug.cgi?id=750785
2015-06-11 16:18:51 +02:00
Jan Schmidt
ca864ce46e playbin: Fix some warnings with clang around multiview enums
There is the GstVideoMultiviewMode enum and the
GstVideoMultiviewFramePacking, which is a subset of the
multiview modes, with the same values as the corresponding
types from the full enum. Do some casts and use the right
times to avoid implicitly using/passing GstVideoMultiviewFramePacking
when a GstVideoMultiviewMode is needed.
2015-06-11 23:01:48 +10:00
Jan Schmidt
383d8f02be playbin: Implement multiview frame-packing overrides
Add GstVideoMultiviewFramePacking enum, and the
video-multiview-mode and video-multiview-flags
properties on playbin.

Use a pad probe to replace the multiview information in
video caps sent out from uridecodebin.

This is a part implementation only - for full
correctness, it should also modify caps in caps events,
accept-caps and allocation queries.

https://bugzilla.gnome.org/show_bug.cgi?id=611157
2015-06-11 12:05:00 +10:00
Víctor Manuel Jáquez Leal
7b78a33dc6 playsink: fix the channel of color balance element
When traversing the color balance element channel list to find the one that
matches with the playsink proxy, the assignation was set to iterator of the
playsink proxy, not the balance element. Thus, the mapping to the values of
the balance element channel was wrong.

This patch fixes the assignation of the color balance element channel, so the
mapping to the channel of the color balance element is fixed.

https://bugzilla.gnome.org/show_bug.cgi?id=750691
2015-06-10 13:12:31 +02:00
Vineeth TM
50beddd474 playsink: cannot enable text flag while playing
when text playbin is not enabled in the beginning, then
video_srcpad_stream_synchronizer gets linked to videochain->sinkpad
and when we try to enable text bin during play, since it is already linked to videochain,
text chain does not get linked properly. Hence unlinking the same
before linking to text chain

https://bugzilla.gnome.org/show_bug.cgi?id=748908
2015-06-10 10:38:45 +02:00
Sreerenj Balachandran
90bbb830d9 playback: Skip 'ANY' capsfeature while finding the count of common capsfeatures
https://bugzilla.gnome.org/show_bug.cgi?id=687182
2015-06-09 10:13:08 +02:00
Sreerenj Balachandran
16378a7de3 playback: Add gstplaybackutils.{h,c} to deploy the common subroutines
Bring some of the helper functions in gstplaybin2.c to new files
gstplaybackutils.{h,c} which can be utilized by other files
in gst/playback too.

https://bugzilla.gnome.org/show_bug.cgi?id=687182
2015-06-09 10:13:08 +02:00
Mathieu Duponchelle
2ad27e4c13 audioresample: copy metadata that only has the "audio" tag.
https://bugzilla.gnome.org/show_bug.cgi?id=750406
2015-06-04 19:16:40 +02:00
Mathieu Duponchelle
88484399c5 audioconvert: copy metadata that only has the "audio" tag.
https://bugzilla.gnome.org/show_bug.cgi?id=750406
2015-06-04 19:16:40 +02:00
Thibault Saunier
dcfb8a83a5 encodebin: Add a way to enable/disabled a GstEncodingProfile
Summary:
So that the user can easily use the same encoding profile to render
with/without audio/video stream.

API:
  gst_encoding_profile_is_disabled
  gst_encoding_pofile_set_enabled

https://bugzilla.gnome.org/show_bug.cgi?id=749056
2015-06-01 10:22:31 +02:00
Jan Schmidt
db86cff74d videotestsrc: Document the solid-color pattern 2015-05-30 01:11:47 +10:00
Jan Schmidt
b14ede9332 playback: Document GST_PLAY_FLAG_SOFT_COLORBALANCE 2015-05-30 01:11:47 +10:00
George Kiagiadakis
c84f911cee videorate: update the caps framerate only in the GST_PAD_SINK transform_caps direction
When a stream has a variable framerate, videorate calculates it and
forces it on the output caps. However, the code in _transform_caps()
currently also does that if the transform is going in the opposite
direction (GST_PAD_SRC), so during a renegotiation it tries to force
upstream to use the calculated framerate and it fails.

https://bugzilla.gnome.org/show_bug.cgi?id=750032
2015-05-29 15:03:05 +02:00
Thiago Santos
12ac087807 playsink: use queue to avoid lock in audiotee audio branches
This part of pipeline is:

tee name=t ! visualizationbin ! streamsynchronizer name=s
t. ! s.

streamsynchronizer might block and it could starve the visualization
branch of the pipeline when it is enabled.

The visualization bin has queues internally but the other branch
that links the audiotee directly to the synchronizer is vulnerable
to block. Adding a queue between "t. ! s." fixes deadlocks.

https://bugzilla.gnome.org/show_bug.cgi?id=749676
2015-05-28 04:56:16 -03:00
Tim-Philipp Müller
39cbe25df7 gio: don't use soon-to-be-deprecated g_cancellable_reset()
From the API documentation: "Note that it is generally not
a good idea to reuse an existing cancellable for more
operations after it has been cancelled once, as this
function might tempt you to do. The recommended practice
is to drop the reference to a cancellable after cancelling
it, and let it die with the outstanding async operations.
You should create a fresh cancellable for further async
operations."

https://bugzilla.gnome.org/show_bug.cgi?id=739132
2015-05-19 18:52:41 +01:00
Tim-Philipp Müller
37aa31379f tcp: don't use soon-to-be-deprecated g_cancellable_reset()
From the API documentation: "Note that it is generally not
a good idea to reuse an existing cancellable for more
operations after it has been cancelled once, as this
function might tempt you to do. The recommended practice
is to drop the reference to a cancellable after cancelling
it, and let it die with the outstanding async operations.
You should create a fresh cancellable for further async
operations."

https://bugzilla.gnome.org/show_bug.cgi?id=739132
2015-05-19 18:50:41 +01:00
Stefan Sauer
9b9d1a6119 Revert "doc: Workaround gtkdoc issue"
This reverts commit df7ef3c35d.

This is fixed by the gtk-doc 1.23 release.
2015-05-18 20:01:49 +02:00
eunhae choi
1b755eb272 playbin: check the flags before set again
check the previous flags of playsink to avoid the reconfigure of playsink repeatedly

https://bugzilla.gnome.org/show_bug.cgi?id=749528
2015-05-18 10:01:04 +03:00
Nicolas Dufresne
df7ef3c35d doc: Workaround gtkdoc issue
With gtkdoc 1.22, the XML generator fails when a itemizedlist is
followed by a refsect2. Workaround the issue by wrapping the refsect2
into para.
2015-05-16 23:33:55 -04:00
Stefan Sauer
015bd9285a playback: use the new gst_object api
Use gst_object_has_as_anchestor instead of the now deprecated _has_ancestor.
2015-05-15 14:49:47 +02:00
Tim-Philipp Müller
ec5c93f169 docs: update element example pipelines
- gst-launch -> gst-launch-1.0
- use autoaudiosink and audiovideosink more often
- review pipeline examples and descriptions
2015-05-10 11:38:19 +01:00
Vivia Nikolaidou
327efa9805 videoconvert: Expose some properties from the videoconverter API
Expose chroma resampler, alpha mode, alpha value, chroma mode, matrix mode,
gamma mode and primaries mode from the videoconverter API.

https://bugzilla.gnome.org/show_bug.cgi?id=749105
2015-05-08 15:17:06 +02:00
Vivia Nikolaidou
c9cfd0196f video-converter: Change some implicit string enums to real enums
GST_VIDEO_CONVERTER_OPT_ALPHA_MODE, GST_VIDEO_CONVERTER_OPT_CHROMA_MODE,
GST_VIDEO_CONVERTER_OPT_MATRIX_MODE, GST_VIDEO_CONVERTER_OPT_GAMMA_MODE and
GST_VIDEO_CONVERTER_OPT_PRIMARIES_MODE were G_TYPE_STRING with only a few valid
options. Changed those to real enums.

https://bugzilla.gnome.org/show_bug.cgi?id=749104
2015-05-08 15:13:54 +02:00
Sebastian Dröge
a73631a29d streamsynchronizer: Don't override segment.base from upstream with 0
Upstream might want to use it to properly map timestamps to running/stream
times, if we just override it with 0 synchronization will be just wrong.

For this we remove some old 0.10 code related to segment accumulation, and
remove some more code that is useless now, and accumulate the group start time
(aka segment.base offset) manually now.

https://bugzilla.gnome.org/show_bug.cgi?id=635701
2015-05-05 15:35:46 +02:00
Luis de Bethencourt
69f66aff9e Rename property enums from ARG_ to PROP_
Property enum items should be named PROP_ for consistency and readability.
2015-04-27 11:27:00 +01:00
Matthieu Bouron
9dfe40d740 videoconvert: Keep colorimetry and chroma-site fields if passthrough
https://bugzilla.gnome.org/show_bug.cgi?id=748141
2015-04-27 11:20:36 +02:00
Tim-Philipp Müller
4984828fcf Remove obsolete Android build cruft
This is not needed any longer.
2015-04-26 18:59:32 +01:00
Tim-Philipp Müller
c680e324bc Remove obsolete Android build cruft
This is not needed any longer.
2015-04-26 18:42:34 +01:00
Tim-Philipp Müller
1638859627 typefinding: don't read more data than needed in MSS typefinder 2015-04-26 14:45:44 +01:00
Tim-Philipp Müller
9ef16721ed typefinding: detect MSS manifests without using g_convert()
Embedded systems often have limited charset conversion
functionality, so don't rely on g_convert() (i.e. iconv)
for UTF-16 to UTF-8 conversions, we can easily enough do
that ourselves by converting to native endianness and
then using GLib's helper functions.
2015-04-26 14:41:30 +01:00
Luis de Bethencourt
df08f5eabe remove unused enum items PROP_LAST
This were probably added to the enums due to cargo cult programming and are
unused. Removing them.
2015-04-24 17:11:01 +01:00
Bernhard Miller
1c01b50ada audioconvert: fix mixed usage of gint and gint32 in int matrix
This is a fixup for b2db18cda2
audioconvert: avoid float calculations when mixing integer-formatted channels

The int matrix was using gint and gint32 synonymously, which can theoretically
cause problems if gint and gint32 are actually different types.

https://bugzilla.gnome.org/show_bug.cgi?id=747005
2015-04-15 12:18:03 +02:00
Tim-Philipp Müller
dc4e517dc6 gio: fix gvfs plugin dependencies
Try harder to look for gvfs backend changes in the right
place, to make sure the plugin gets reloaded when backends
are removed or installed. We watch the gvfs mounts directory
because the files there contain absolute paths to the
backend executables, and those may not be in the usual gio
path.

https://bugzilla.gnome.org/show_bug.cgi?id=747841
2015-04-14 16:00:42 +01:00
Tim-Philipp Müller
d4f9ea8499 app, videorate: fix CFLAGS and LIBADD order
Make sure local headers are included before installed -base.
2015-04-11 00:03:29 +01:00
Sebastian Dröge
3570100b66 decodebin: Also log the pointer value of sticky events in debug output
Makes it easier to follow them in the debug logs.
2015-04-08 20:49:39 -07:00
Tim-Philipp Müller
6db2ee56b6 tcpserversink: don't error out if clients send us something, just ignore it
We don't expect clients to send us any data, but if they do, just
ignore it. Web browsers might send us an HTTP request for example,
but some will still be happy if we just send them data without
a proper HTTP response.

There was a bug in the reading code path. We only have a small
read buffer and would provoke an EWOULDBLOCK trying to read
because we don't bail out of the loop early enough.

https://bugzilla.gnome.org/show_bug.cgi?id=743834
2015-04-04 21:38:40 +01:00
Tim-Philipp Müller
609d021f96 videorate: downgrade left-over ERROR debug message 2015-04-04 00:49:23 +01:00
Tim-Philipp Müller
413fc30235 videorate: fix a couple of memory leaks
tests: videorate: fix leak in unit test
2015-04-04 00:49:21 +01:00
Vincent Penquerc'h
77dc09c3a9 decodebin2: fix deadlock on chain shutdown
When shutting down the chain, we can get a deadlock when removing
a pad, if that chain was being busy streaming but blocked (eg, while
waiting for a queue to have free space).

https://bugzilla.gnome.org/show_bug.cgi?id=746480
2015-04-03 15:42:49 +01:00
Thibault Saunier
ae86dec9ca videorate: Detect framerate if not forced to variable downstream
In case upstream does not provide videorate with framerate information,
it will detect the current framerate from the buffer it received,
but if downstream forces the use of variable framerate (most probably
through the use of a caps filter with framerate = 0 / 1), videorate will
respect that.

And add some unit tests

https://bugzilla.gnome.org/show_bug.cgi?id=734424
2015-04-02 17:13:24 -04:00
Thibault Saunier
1cda538e00 videorate: Do not loop forever pushing first buffer when variable framerate
In the case the framerate is variable (represented by framerate=0/1),
we currently end up loop pushing the first buffer and then recompute
diff1 and diff2 without updating the videorate->next_ts at all
leading to infinitely looping pushing that first buffer.

In the case of variable framerate, we should just compute the next_ts
as previous_pts + previous_duration.

https://bugzilla.gnome.org/show_bug.cgi?id=734424
2015-04-02 17:13:24 -04:00
Bernhard Miller
b2db18cda2 audioconvert: avoid float calculations when mixing integer-formatted channels
The patch calculates a second channel mixing matrix from the current one. The
matrix contains the original values * (2^10) as integers. This matrix is used
when integer-formatted channels are mixed.

On a ARM Cortex-A8, single core, 800MHz this improves performance in a
testcase from 29s to 9s for downmixing 6 channels to stereo.

https://bugzilla.gnome.org/show_bug.cgi?id=747005
2015-04-01 07:31:37 -07:00
Luis de Bethencourt
985ed4847f playbin: avoid possible deference of null pointer
For safety, check the pointer playbin->curr_group is valid before
reading parameters of the structure.

CID #1291624
2015-03-30 10:50:48 +01:00
Thiago Santos
ceb26dd93d decodebin: improve debug message by printing the object
Print the pad object that EOS'd too early
2015-03-27 09:21:59 -03:00
Thiago Santos
d54d51d0d2 playbin: ignore new pads if it is shutting down
If a new pad is added after playbin has been put to READY/NULL it
should ignore new pads as it is shutting down.

This can happen when the pipeline fails to preroll (is still in READY)
and the user gives up on waiting or an error that doesn't reach
the demuxer occurs (on some event handling) and it will continue to
work and exposing pads while playbin has been put to NULL.

Without this check an input-selector is created and set to PAUSED
state, preventing playbin from properly shutting down in case it
has data blocked inside it.
2015-03-25 08:32:33 -03:00
Nicolas Dufresne
9695222b0f videorate: Don't leak the pools
gst_query_set_nth_alloction_pool() is transfer none on the pool, so we must
unref the pool when done.
2015-03-24 15:23:34 -04:00
Ilya Konstantinov
3dc3aa4e3b audioconvert: Eliminate unsigned quantizers
audio_convert_convert unpacks to default format (signed) before calling
quantize, and the unsigned variants were equivalent to signed anyway,
so we just get rid of them.
2015-03-24 16:52:07 +01:00
Ilya Konstantinov
7b398701cf audioconvert: Avoid int division in quantization
Since range size is always 2^n, we can simply use modulo (implemented
with a bitmask).

The previous implementation used 64-bit integer division, which is
done in software on ARMv7. Although the divisor was constant, the
division could not be transformed into "multiplication by magic number"
since the dividend was 64-bit.

The now-unused and not-so-fast gst_fast_random_(u)int32_range functions
were removed.

Also, implementing bug fixes:

1) ADD_DITHER_TPDF_HF_I no longer discards bias.

2) We change TPDF's noise range to be the same as RPDF's. Previously,
RPDF's noise ranged:
  { bias - dither, bias + dither }
while TPDF's noise ranged:
  { bias/2 - dither/2, bias/2 + dither/2 - 1 } +
  { bias/2 - dither/2, bias/2 + dither/2 - 1 } =
  { bias - dither, bias + dither - 2 }
Now, both range:
  { bias - dither, bias + dither - 1 }

https://bugzilla.gnome.org/show_bug.cgi?id=746661
2015-03-24 16:52:07 +01:00
Duncan Palmer
bf3e35a598 decodebin2: Set multiqueue sizes before use-buffering.
This fixes a race where the use-buffering property on a multiqueue was
set before the queue depth was changed from it's high preroll limits to
lower playback limits. This resulted in buffering messages being emitted
by the multiqueue in the short window between use-buffering being
set and the queue depth being reset.

https://bugzilla.gnome.org/show_bug.cgi?id=744308
2015-03-24 08:17:47 -03:00
Thiago Santos
b0b0ae1f24 streamsynchronizer: fix deadlock condition
The variables could have changed when the lock was released
to push a gap event. Streamsynchronizer needs to check them
again before going to sleep.

Bonus: fix a comment typo
2015-03-14 18:14:07 +00:00
Ramiro Polla
33b9535d97 playsink: remove redundant else statements 2015-03-14 14:21:32 +00:00
Ramiro Polla
b636fe29f3 playbin: don't escape percent sign in documentation code sample 2015-03-14 14:20:17 +00:00
William Manley
8328eab2de socketsrc: Add support for GstNetControlMessageMeta
multisocketsink now understands the new GstNetControlMessageMeta to allow
sending control messages (ancillary data) with data when writing to Unix
domain sockets.

Thanks to glib's `GSocketControlMessage` abstraction the code introduced
in this commit is entirely portable and doesn't introduce and additional
dependencies or conditionally compiled code, even if it is unlikely to be
of much use on non-UNIX systems.
2015-03-14 13:23:28 +01:00
William Manley
e63e023e30 multisocketsink: Add support for GstNetControlMessageMeta
multisocketsink now understands the new GstNetControlMessageMeta to allow
sending control messages (ancillary data) with data when writing to Unix
domain sockets.

A later commit will introduce a new socketsrc element which will similarly
understand `GstNetControlMessageMeta`.  This, when used with a
`GSocketControlMessage` of type `GUnixFDMessage` will allow GStreamer to
send and receive file-descriptions in ancillary data, the first step to
using memfds to implement zero-copy video IPC.

Thanks to glib's `GSocketControlMessage` abstraction the code introduced
in this commit is entirely portable and doesn't introduce and additional
dependencies or conditionally compiled code, even if it is unlikely to be
of much use on non-UNIX systems.
2015-03-14 13:23:20 +01:00
William Manley
a297b0545f socketsrc: Add connection-closed-by-peer signal
This provides notification that the socket in use was closed by the peer
and gives an opportunity to replace it with a new one which is not
closed, allowing reading from many sockets in order.

I use this in pulsevideo to implement reconnection logic to handle the
pulsevideo service dieing, such that is can be restarted without
disrupting downstream.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=739546
2015-03-13 20:05:00 +01:00
William Manley
a19ac4b85c socketsrc: Tidy up usage of g_object_unref/g_clear_object and locking
This is clearer, and should make future changes safer.  No functional
change intended.

See https://bugzilla.gnome.org/show_bug.cgi?id=739546
2015-03-13 20:05:00 +01:00
William Manley
0c054aa00d socketsrc: Refactor to simplify
* Don't bother polling, just do a blocking read, the `GCancellable` will
  take care of unlocking.  This should also be faster on MS Windows where
  the GIO documentation for `g_socket_get_available_bytes` states: "Note
  that on Windows, this function is rather inefficient in the UDP case".

* Implement `GstPushSrc.fill` rather than `GstPushSrc.create`.  This means
  that we will be using the downstream allocator which may be more
  efficient.  It also means that socketsrc is likely to respect its
  "blocksize" property (assuming that there is enough data available).

See https://bugzilla.gnome.org/show_bug.cgi?id=739546
2015-03-13 20:05:00 +01:00
William Manley
7c10499ecd tcp: Add element socketsrc
`socketsrc` can be considered a source counterpart to `multisocketsink`.
It can be considered a generalization of `tcpclientsrc` and
`tcpserversrc`:  it contains all the logic required to communicate over
the socket but none of the logic for creating the sockets/establishing
the connection in the first place, allowing the user to accomplish this
externally in whatever manner they wish making it applicable to other
types of sockets besides TCP.

This commit essentially copies the implementation directly from
tcpserversrc.  Later patches will tidy the implementation up and
re-implement `tcpclientsrc` and `tcpserversrc` in terms of `socketsrc`.

See https://bugzilla.gnome.org/show_bug.cgi?id=739546
2015-03-13 20:05:00 +01:00
William Manley
b8232a7467 multisocketsink: Map GstMemorys individually when sending
If a buffer is made up of non-contiguous `GstMemory`s `gst_buffer_map`
has to copy all the data into a new `GstMemory` which is contiguous.  By
mapping all the `GstMemory`s individually and then using scatter-gather
IO we avoid this situation.

This is a preparatory step for adding support to multisocketsink for
sending file descriptors, where a GstBuffer may be made up of several
`GstMemory`s, some of which are backed by a memfd or file, but I think this
patch is valid and useful on its own.

Fixes https://bugzilla.gnome.org/show_bug.cgi?id=746150
2015-03-13 16:20:50 +01:00
Jan Schmidt
3d60fb654b docs: Add new video functions and objects. Cleanup a little.
Add GstVideoChroma, GstVideoDither, GstVideoScaler and friends to the docs.

Remove and clean up a few obsolete/deleted refs and typos
2015-03-13 01:08:25 +11:00
Sebastian Dröge
8093e3ba94 playbin: Disconnect signals and invalidate group if it fails to activate
Otherwise playbin might move to the group directly after EOS of the next
group, and then error out again.
2015-03-12 12:18:30 +00:00
Song Bing
7ce97c723c streamsynchronizer: Remove unnecessary ERROR message.
Remove unnecessary ERROR message.
Push GAP will fail as flushing. Needn't ERROR message.

https://bugzilla.gnome.org/show_bug.cgi?id=736655
2015-03-11 15:48:42 +00:00
Wim Taymans
9bbfc3c848 videotestsrc: add all colors mode 2015-03-10 12:27:03 +01:00
Tim-Philipp Müller
c53ba4beeb Fix double semicolons 2015-03-10 09:27:08 +00:00
Olivier Crete
124b6ee03c videorate: Accept any capsfeatures 2015-03-09 21:39:02 -04:00
Sebastian Dröge
40f4daffd1 volume: Explicitly cast integers to doubles and then back to integers after multiplication
gcc 4.9.1 on ARM seems to have a bug that causes it to cast the float to an
integer first, resulting in a 0 scale factor for volume < 1.0.

As a side effect this change here will also improve accuracy of the result a
bit because we go via doubles instead of floats.

https://gcc.gnu.org/bugzilla/show_bug.cgi?id=65325
https://bugzilla.gnome.org/show_bug.cgi?id=745667
2015-03-05 14:22:12 +01:00
Arun Raghavan
dfdbc1c379 adder: Drop custom latency querying logic
The default latency query handler now implements the same logic already.
2015-02-27 00:52:05 +05:30
Edward Hervey
7813315a4c playback: Fix broken GList modification
When we modify a GList (via g_list_delete_link), always reassign the
new head to the original GList. Otherwise we end up with
filtered_errors being corrupt (the head might have been the element
removed)
2015-02-26 12:08:49 +01:00
Vincent Penquerc'h
561ddabd97 decodebin: fix deadlock when resetting buffering
This function is static, and only ever called with the expose lock
taken. It thus has no reason to take this lock itself.

This was introduced by one of my locking fixes from 741355.

https://bugzilla.gnome.org/show_bug.cgi?id=741355
2015-02-24 16:07:26 +00:00
Vincent Penquerc'h
a2ca6459a6 playbin: forward template and ring buffer settings to existing decodebins
https://bugzilla.gnome.org/show_bug.cgi?id=744844
2015-02-24 10:02:19 +00:00
Luis de Bethencourt
8703d93bbf decodebin: move null check
Check if dbin->decode_chain is NULL before running drain_and_switch_chains()
because if it is, we shouldn't run that function or it will segfault.

CID #1271074
2015-02-23 17:24:56 +00:00
Sebastian Dröge
1dcd1a7479 decodebin: Only consider non-parser factories for generating the post-parser capsfilter caps
Otherwise if there are multiple parsers we would most likely break negotiation
of the stream-format/alignment wanted by the decoders as parsers generally
support all possible stream-formats and alignments.
2015-02-20 12:35:19 +02:00
Vincent Penquerc'h
a2ee84fa80 decodebin: fix deadlock between downward state change and pad addition
If caps on a newly added pad are NULL, analyze_new_pad will try to
acquire the chain lock to add a probe to the pad so the chain can
be built later. This comes from the streaming thread, in response
to headers or other buffers causing this pad to be added, so the
stream lock is taken.

Meanwhile, another thread might be destroying the chain from a
downward state change. This will cause the chain to be freed with
the chain lock taken, and some elements are set to NULL here, which
can include the parser. This causes pad deactivation, which tries
to take the element's pad's stream lock, deadlocking.

Fix this by keeping track of which elements need setting to NULL,
and only do this after the chain lock is released. Only the chain
manipulation needs to be locked, not the elements' state changes.

https://bugzilla.gnome.org/show_bug.cgi?id=741355
2015-02-19 13:38:35 +00:00
Vincent Penquerc'h
a848ac7abe decodebin: guard against the decode chain going while a pad is added
https://bugzilla.gnome.org/show_bug.cgi?id=741355
2015-02-19 13:38:35 +00:00
Vincent Penquerc'h
9036dc8594 decodebin: possible fix for deadlock when spamming "next song"
There was a deadlock between a thread changing decodebin/demuxer
state from PAUSED to READY, and another thread pushing data
when starting.

From the stack trace at
https://bug741355.bugzilla-attachments.gnome.org/attachment.cgi?id=292471,
I deduce the following is happening, though I did not reproduce the
problem so I'm not sure this patch fixes it.

The streaming thread (thread 2 in that stack trace) takes the demuxer's
sink pad's stream lock in gst_ogg_demux_perform_seek_pull and will
activate a new chain. This ends up causing the expose lock being taken
in _pad_added_cb in decodebin.

Meanwhile, a state changed is triggered on thread 1, which takes the
expose lock in decodebin in gst_decode_bin_change_state, then frees
the previous chain, which ends up calling gst_pad_stop_task on the
demuxer's task, which in turn takes the demuxer's sink pad's stream
lock, deadlocking as both threads are now waiting for each other.

https://bugzilla.gnome.org/show_bug.cgi?id=741355
2015-02-19 13:38:29 +00:00
Sebastian Dröge
2813e08210 uridecodebin: Reset the default query return value when the iterator has to resync 2015-02-19 01:30:05 +02:00
Sebastian Dröge
5da04ca3c7 uridecodebin: Let the latency query fail if one of the source queries fails 2015-02-19 01:22:26 +02:00
Olivier Crête
0487e1548d uridecodebin: Pass object, not GValue to debug print 2015-02-17 18:39:03 -05:00
Song Bing
fb9ca25f7f streamsynchronizer: Use the same waiting function for EOS and stream switches
Also improve the waiting condition for stream switches, which was assuming
before that the condition variable will only stop waiting once when it is
signaled. But the documentation says that there might be spurious wakeups.

https://bugzilla.gnome.org/show_bug.cgi?id=736655
2015-02-16 14:34:35 +02:00
Song Bing
2614f80309 streamsynchronizer: Send GAP events from the pads' streaming threads
Change the GAP events that are currently sent from the chain function of
the current pad to all other EOS pads. They should instead be sent from
their own streaming threads.

https://bugzilla.gnome.org/show_bug.cgi?id=736655
2015-02-16 14:12:28 +02:00
Song Bing
9f81931716 streamsynchronizer: Send GAP event to finish preroll when change state from PLAYING to PAUSED
Wait in the event function when EOS is received until all pads are EOS
and then forward the EOS event from each pads own event function.

Also send a new GAP event for EOS pads from the event function whenever
going from PLAYING->PAUSED by shortly waking up the GCond. This is needed
to allow sinks to pre-roll again, as they did not receive EOS yet because
we blocked that, but also will never get data again.

https://bugzilla.gnome.org/show_bug.cgi?id=736655
2015-02-16 14:09:43 +02:00
Stefan Sauer
c51bf98af4 playbin: improve debug log
Log the human readable pad_link_return desc as well.
2015-02-11 22:16:53 -08:00
Sebastian Dröge
8547594727 Improve and fix LATENCY query handling
This now follows the design docs everywhere, especially the maximum latency
handling.

https://bugzilla.gnome.org/show_bug.cgi?id=744106
2015-02-11 17:53:49 +02:00
Luis de Bethencourt
f85212ed4b videoscale: fix memory leak
In gst_video_scale_fixate_caps () it can goto done without freeing the memory
of the tmp GstStructure. This makes it go out of scope and leak.

CID #1265766
2015-02-04 12:09:45 +00:00
Wim Taymans
47bd6a138c videoscale: don't do dithering 2015-01-28 17:30:53 +01:00
Luis de Bethencourt
783204824d orc: update orc files 2015-01-27 13:39:14 +00:00
Wim Taymans
3db8879f25 videoscale: disable chroma and matrix operations
Ignore chroma subsampling and color matrix transformations like the
old videoscale used to do. This is to make the performance like it was
before.

See https://bugzilla.gnome.org/show_bug.cgi?id=741987
2015-01-27 10:52:29 +01:00
Sebastian Dröge
2bd4ea6e8e Constify some static arrays everywhere 2015-01-21 09:49:47 +01:00
Vincent Penquerc'h
661588b150 dcodebin2: fix lock/unlock mismatch on multiqueue overrun 2015-01-20 15:09:13 +00:00
Jan Alexander Steffens (heftig)
a636c39638 audioresample: Try to prevent endless looping
Speex may decide not to consume any samples because it can't write any. I've
seen a hang during draining caused by the resample loop never terminating.
In that case, resampling happened as normal until olen was 0 but ilen was
still 1. _process_native then reduced ichunk to 0, so ilen never decreased
below 1 and the loop never terminated.

Instead of reverting 684cf44 ({audioresample: don't skip input samples),
break only if all output samples have been produced and speex refuses
to consume any more input samples.

https://bugzilla.gnome.org/show_bug.cgi?id=732908
2015-01-19 19:36:13 +01:00
Sebastian Dröge
63afbce6be videorate: Add $(GST_PLUGINS_BASE_CFLAGS) to be able to find gst/video/video.h 2015-01-19 11:17:18 +01:00
Nicolas Dufresne
e60158c98f videorate: Implement allocation query
The videorate element keeps 1 buffer internally. This buffer need
to be requested during allocation query otherwise the pipeline may
stall.

https://bugzilla.gnome.org/show_bug.cgi?id=738302
2015-01-18 14:58:36 -05:00
Nicolas Dufresne
2e264103e1 Revert "videorate: Implement allocation query"
This reverts commit 3c04db4a30.
2015-01-18 14:17:07 -05:00
Nicolas Dufresne
3c04db4a30 videorate: Implement allocation query
VideRate keeps 1 buffer in order to duplicate base on closest buffer
relative to targeted time. This extra buffer need to be request
otherwise the pipeline may stall when fixed size buffer pool is used.

https://bugzilla.gnome.org/show_bug.cgi?id=738302
2015-01-18 11:02:00 -05:00
Sebastian Dröge
2228d9f22b decodebin: Fix compilation 2015-01-17 14:51:48 +01:00