Original commit message from CVS:
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_class_init),
(gst_wavpack_enc_init), (gst_wavpack_enc_chain),
(gst_wavpack_enc_rewrite_first_block):
* ext/wavpack/gstwavpackenc.h:
Put the write helpers into the GstWavpackEnc struct directly and not
as a pointer to save two small, but useless mallocs. This also makes
it possible to drop the finalize method.
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_push_buffer):
For consistency reasons also set GST_BUFFER_OFFSET_END on the outgoing
buffers the same way wavpackenc does it.
Original commit message from CVS:
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_chain):
Don't use gst_pad_alloc_buffer() as we might clip the buffer later and
BaseTransform-based elements will likely break because of wrong
unit-size. Also plug a possible memleak that happens when decoding
fails for some reason.
Original commit message from CVS:
Based on patch by: Paul Davis <paul at linuxaudiosystems dot com>
* ext/jack/gstjackaudioclient.c: (gst_jack_audio_unref_connection):
Don't need to take the connection lock, it will not be used and could
cause deadlocks.
Original commit message from CVS:
* sys/osxvideo/osxvideosink.m:
Emit 'have-ns-view' message when working in embedded mode. The message
will contain a pointer to the newly created NSView.
Original commit message from CVS:
* gst/mpegvideoparse/mpegpacketiser.c: (mpeg_util_find_start_code),
(collect_packets), (set_par_from_dar), (set_fps_from_code),
(mpeg_util_parse_extension_packet), (mpeg_util_parse_sequence_hdr),
(mpeg_util_parse_picture_hdr):
* gst/mpegvideoparse/mpegpacketiser.h:
* gst/mpegvideoparse/mpegvideoparse.c:
(mpegvideoparse_handle_sequence), (mpegvideoparse_handle_picture),
(mpegvideoparse_drain_avail), (gst_mpegvideoparse_chain),
(mpv_parse_sink_event), (plugin_init):
* gst/mpegvideoparse/mpegvideoparse.h:
Move the MPEG specific byte parsing into the mpegpacketiser code.
Add parsing of picture types, that just feeds into a debug message
for now.
Fix some 64-bit format strings.
Original commit message from CVS:
* gst/equalizer/gstiirequalizer10bands.c:
(gst_iir_equalizer_10bands_init):
A 10 band EQ should be initialized to 1 bands and not to 3.
Original commit message from CVS:
* configure.ac:
* gst/mpeg1videoparse/Makefile.am:
* gst/mpeg1videoparse/gstmp1videoparse.c:
* gst/mpeg1videoparse/gstmp1videoparse.h:
* gst/mpeg1videoparse/mp1videoparse.vcproj:
* gst/mpegvideoparse/Makefile.am:
* gst/mpegvideoparse/mpegpacketiser.c: (mpeg_packetiser_init),
(mpeg_packetiser_free), (mpeg_packetiser_add_buf),
(mpeg_packetiser_flush), (mpeg_find_start_code),
(get_next_free_block), (complete_current_block),
(append_to_current_block), (start_new_block), (handle_packet),
(collect_packets), (mpeg_packetiser_handle_eos),
(mpeg_packetiser_get_block), (mpeg_packetiser_next_block):
* gst/mpegvideoparse/mpegpacketiser.h:
* gst/mpegvideoparse/mpegvideoparse.c: (mpegvideoparse_get_type),
(gst_mpegvideoparse_base_init), (gst_mpegvideoparse_class_init),
(mpv_parse_reset), (gst_mpegvideoparse_init),
(gst_mpegvideoparse_dispose), (set_par_from_dar),
(set_fps_from_code), (mpegvideoparse_parse_seq),
(gst_mpegvideoparse_time_code), (gst_mpegvideoparse_flush),
(mpegvideoparse_drain_avail), (gst_mpegvideoparse_chain),
(mpv_parse_sink_event), (gst_mpegvideoparse_change_state),
(plugin_init):
* gst/mpegvideoparse/mpegvideoparse.h:
* gst/mpegvideoparse/mpegvideoparse.vcproj:
Port mpeg1videoparse to 0.10 and give it rank SECONDARY-1, so
that it's below existing decoders.
Rename it to mpegvideoparse to reflect that it handles MPEG-1 and
MPEG-2 now.
Re-write the parsing code so that it collects packets differently
and timestamps Picture packets correctly.
Add a list of FIXME's at the top.
Original commit message from CVS:
* gst/audioresample/gstaudioresample.c:
(audioresample_check_discont), (audioresample_transform):
Don't trigger discontinuities for very small imperfections; a filter
flush will sound bad, and many plugins have rounding errors leading
to these.
Original commit message from CVS:
* tests/icles/equalizer-test.c: (equalizer_set_band_value),
(equalizer_set_all_band_values),
(equalizer_set_band_value_and_wait),
(equalizer_set_all_band_values_and_wait), (do_slider_fiddling),
(main):
Port the example to new equalizer api.
Original commit message from CVS:
* sys/osxvideo/cocoawindow.h:
* sys/osxvideo/cocoawindow.m:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Fix leaks when running a NSApp.
Accept any kind of resolutions.
Works in fullscreen. Can maximize.
Only thing left before being able to move this to -good is documentation
and embedded window support.
Original commit message from CVS:
* gst/audioresample/debug.h:
* gst/audioresample/resample.c: (resample_init):
Since I really am not interested in a debug line for each sample
being processed, move the library's debugging to its own category,
libaudioresample
Original commit message from CVS:
* sys/directdraw/gstdirectdrawsink.c:
* sys/directdraw/gstdirectdrawsink.h:
Handle display mode changes during playback.
Original commit message from CVS:
* gst/equalizer/Makefile.am:
* gst/equalizer/gstiirequalizer.c: (_do_init),
(gst_iir_equalizer_band_set_property),
(gst_iir_equalizer_band_get_property),
(gst_iir_equalizer_band_class_init),
(gst_iir_equalizer_band_get_type),
(gst_iir_equalizer_child_proxy_get_child_by_index),
(gst_iir_equalizer_child_proxy_get_children_count),
(gst_iir_equalizer_child_proxy_interface_init),
(gst_iir_equalizer_base_init), (gst_iir_equalizer_class_init),
(gst_iir_equalizer_finalize), (setup_filter),
(gst_iir_equalizer_compute_frequencies),
(gst_iir_equalizer_set_property), (gst_iir_equalizer_get_property),
(gst_iir_equalizer_setup), (plugin_init):
* gst/equalizer/gstiirequalizer.h:
* gst/equalizer/gstiirequalizernbands.c:
(gst_iir_equalizer_nbands_base_init),
(gst_iir_equalizer_nbands_class_init),
(gst_iir_equalizer_nbands_init),
(gst_iir_equalizer_nbands_set_property),
(gst_iir_equalizer_nbands_get_property):
* gst/equalizer/gstiirequalizernbands.h:
Refactor plugin into a base class and a first subclass (nband eq). The
nband eq uses GstChildProxy and is controlable. More subclasses will
follow.
Original commit message from CVS:
Includes patch by: Paul Davis <paul at linuxaudiosystems dot com>
* ext/jack/Makefile.am:
* ext/jack/gstjackaudioclient.c: (gst_jack_audio_client_init),
(jack_process_cb), (jack_sample_rate_cb), (jack_buffer_size_cb),
(jack_shutdown_cb), (connection_find),
(gst_jack_audio_make_connection), (gst_jack_audio_get_connection),
(gst_jack_audio_unref_connection),
(gst_jack_audio_connection_add_client),
(gst_jack_audio_connection_remove_client),
(gst_jack_audio_client_new), (gst_jack_audio_client_free),
(gst_jack_audio_client_get_client),
(gst_jack_audio_client_set_active):
* ext/jack/gstjackaudioclient.h:
Make an object to manage client connections to the jack server which we
will use in the future to run selected jack elements with the same jack
connection.
Make some stuff a bit more threadsafe.
Activate the jack client ASAP.
* ext/jack/gstjackaudiosink.c:
(gst_jack_audio_sink_allocate_channels),
(gst_jack_audio_sink_free_channels), (jack_process_cb),
(gst_jack_ring_buffer_open_device),
(gst_jack_ring_buffer_close_device),
(gst_jack_ring_buffer_acquire), (gst_jack_ring_buffer_release),
(gst_jack_audio_sink_class_init), (gst_jack_audio_sink_init),
(gst_jack_audio_sink_getcaps):
* ext/jack/gstjackaudiosink.h:
Use new client object to manage connections.
Don't remove and recreate all ports, try to reuse them.
Original commit message from CVS:
* ext/wavpack/gstwavpack.c: (plugin_init):
* ext/wavpack/gstwavpackcommon.c:
Use a general wavpack debug category for common code.
* ext/wavpack/gstwavpackstreamreader.c:
(gst_wavpack_stream_reader_set_pos_abs),
(gst_wavpack_stream_reader_set_pos_rel),
(gst_wavpack_stream_reader_write_bytes):
Use the general wavpack debug category here too and add debug
output to the functions that should not be called at all by
the wavpack library.
* ext/wavpack/gstwavpackdec.c: (gst_wavpack_dec_plugin_init):
* ext/wavpack/gstwavpackenc.c: (gst_wavpack_enc_plugin_init):
* ext/wavpack/gstwavpackparse.c: (gst_wavpack_parse_plugin_init):
Change debugging category names to conform to the conventions.
Original commit message from CVS:
* gst/qtdemux/qtdemux.c:
* gst/qtdemux/qtdemux.h:
Share qtdemux debug category across all files, otherwise all debugging
in files other than qtdemux.c would end up in the default category.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c: (gst_spectrum_start),
(gst_spectrum_event), (gst_spectrum_transform_ip):
* gst/spectrum/gstspectrum.h:
One FIXME less, by resolving message timestamps against the playback
segment.
Original commit message from CVS:
* gst/spectrum/gstspectrum.c: (gst_spectrum_class_init),
(gst_spectrum_init), (gst_spectrum_set_property),
(gst_spectrum_transform_ip):
Fix and cleanup default property values.
Add FIXMEs for stuff that looks rather wrong.
Original commit message from CVS:
* gst/spectrum/demo-audiotest.c: (message_handler):
* gst/spectrum/demo-osssrc.c: (message_handler):
Remove two obsolete and confusing comments.
Original commit message from CVS:
* ext/nas/nassink.c: (gst_nas_sink_class_init),
(gst_nas_sink_init), (gst_nas_sink_getcaps),
(gst_nas_sink_unprepare):
Some more cleanups/changes; use boilerplate macro.
Original commit message from CVS:
* ext/nas/Makefile.am:
* ext/nas/README:
* ext/nas/nassink.c: (gst_nas_sink_get_type),
(gst_nas_sink_base_init), (gst_nas_sink_class_init),
(gst_nas_sink_init), (gst_nas_sink_finalize),
(gst_nas_sink_getcaps), (gst_nas_sink_prepare),
(gst_nas_sink_unprepare), (gst_nas_sink_delay),
(gst_nas_sink_reset), (gst_nas_sink_write),
(gst_nas_sink_set_property), (gst_nas_sink_get_property),
(gst_nas_sink_open), (gst_nas_sink_close), (NAS_flush),
(NAS_sendData), (NAS_EventHandler), (gst_nas_sink_sink_get_format),
(NAS_createFlow), (plugin_init):
* ext/nas/nassink.h:
Bunch of nassink clean-ups: make build by adding the right CFLAGS
and LIBS to Makefile.am; rename structure, macros and functions
according to canonical naming scheme; move some things around a bit;
use GST_CAT_DEFAULT instead of GST_CAT_* everywhere; remove README
file that didn't really contain any useful information anyway (the
useful bits have been moved into the 'host' property description).
Original commit message from CVS:
* gst-libs/gst/app/Makefile.am:
* gst-libs/gst/app/gstappbuffer.c:
* gst-libs/gst/app/gstappbuffer.h:
* gst-libs/gst/app/gstappsrc.c:
Add GstAppBuffer that includes a callback and closure for
proper handling of data chunks.
Original commit message from CVS:
* ext/dts/gstdtsdec.c: (gst_dtsdec_init), (gst_dtsdec_sink_event):
A few small clean-ups.
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_setcaps):
More debug output for failure cases.
Original commit message from CVS:
Patch by: Young-Ho Cha <ganadist at chollian net>
* ext/dts/gstdtsdec.c: (gst_dtsdec_handle_frame),
(gst_dtsdec_change_state):
Don't do forced downmixing to stereo, but check what downstream
can do and let libdts do the downmixing based on that (#400555).
Original commit message from CVS:
Patch by: Lutz Mueller <lutz topfrose de>
* ext/neon/gstneonhttpsrc.c: (gst_neonhttp_src_class_init),
(gst_neonhttp_src_init), (gst_neonhttp_src_set_property),
(gst_neonhttp_src_set_uri), (gst_neonhttp_src_set_proxy),
(gst_neonhttp_src_send_request_and_redirect),
(gst_neonhttp_src_uri_set_uri):
* ext/neon/gstneonhttpsrc.h:
Simplify _set_uri() and _set_proxy() and remove the unused ishttp
member (#388050).
* tests/check/elements/neonhttpsrc.c: (GST_START_TEST):
Fix bogus URI to something that actually exists, otherwise we just
bypass the test (and also to something that doesn't redirect, since
neonhttpsrc doesn't seem to handle this very gracefully yet)
Original commit message from CVS:
* tests/check/Makefile.am:
Draw plugins in from the build tree sys/ dir, rather than
picking up the already installed versions.
Original commit message from CVS:
* sys/osxvideo/cocoawindow.h:
* sys/osxvideo/cocoawindow.m:
* sys/osxvideo/osxvideosink.h:
* sys/osxvideo/osxvideosink.m:
Disable the cocoa event loop since it's a huge memory leak. Should only
matter if the sink isn't used within an NSApp (which has already got
a coca event loop).
Remove all unused code.
Original commit message from CVS:
* configure.ac:
* gst/app/Makefile.am:
* gst/app/gstapp.c:
* gst/app/gstappsrc.c:
* gst/app/gstappsrc.h:
Add a new plugin/library to make it easy for apps to shove
data into a pipeline.
Original commit message from CVS:
* gst/real/gstrealaudiodec.c: (gst_real_audio_dec_init):
* gst/real/gstrealvideodec.c: (gst_real_video_dec_init):
Use gst_pad_use_fixed_caps() on source pads, to avoid negotiation
errors in certain situations (e.g. dec ! cs ! ximagesink and the
imagesink window is resized); also, some minor clean-ups.
