Commit graph

7859 commits

Author SHA1 Message Date
Zaheer Merali
8dd9583357 dvdec: set bottom field first on PAL interlaced content, not top field first
DV interlaced content is always bottom field first. Fixes #591712.
2009-08-14 13:34:53 +01:00
Hans de Goede
10d41286d5 v4l2src: fix 'hang' with some cameras caused by bad timestamping if no framerate is available
For cameras/drivers that don't support e.g. VIDIOC_G_PARM we'd end up without
a framerate and would try to divide by 0, causing run-time warnings and all
frames to be timestamped with 0, which makes sinks that sync against the clock
drop them, causing 'hangs' (observed with the pwc driver and a Logitech QuickCam
Pro 4000). So if we do not know the framerate, simply don't adjust the
timestamps. Fixes #591451.
2009-08-14 13:30:31 +01:00
Filippo Argiolas
a3a61f8940 v4l2src: clear format list in READY->NULL
Clear format list and probed caps when going to NULL so if a new device
is set we'll probe the formats again instead of using previously
detected ones. Fixes bug #591747.
2009-08-14 10:15:43 +02:00
Tim-Philipp Müller
352e071660 0.10.15.2 pre-release 2009-08-11 17:30:41 +01:00
Tim-Philipp Müller
1edaca62f0 Add myself to MAINTAINERS file and update Wim's e-mail. 2009-08-11 15:25:39 +01:00
Tim-Philipp Müller
9590df3c2e v4l2: fix make distcheck by disting some more headers 2009-08-11 03:08:01 +01:00
Tim-Philipp Müller
dbad1d424a docs: update 2009-08-11 02:43:35 +01:00
Tim-Philipp Müller
4701696a92 Move rtpmanager from -bad to -good.
Hook up build infrastructure (autotools, docs, unit test).
2009-08-11 02:43:09 +01:00
ric
92abe07e80 rtpsource: avoid buffer leak on bad seqnum
Fixes #590797
2009-08-11 02:30:47 +01:00
Wim Taymans
9f68303a2e rtpsource: allow for NULL caps on buffers
Add the NULL caps check where it matters and also cover another case of
potential NULL caps.

Fixes #590030
2009-08-11 02:30:47 +01:00
Olivier Crête
e37844fdc7 rtpsource: Incoming buffers do not always have caps 2009-08-11 02:30:47 +01:00
Wim Taymans
3091137217 rtpsession: avoid doing lip-sync in BYE
When we get a BYE packet, don't do lip-sync with the SR inside because some
senders have trouble constructing valid SR packets after BYE.
2009-08-11 02:30:47 +01:00
Wim Taymans
3747ede14a rtpbin: don't do lip-sync after a BYE
After a BYE packet from a source, stop forwarding the SR packets for lip-sync
to rtpbin. Some senders don't update their SR packets correctly after sending a
BYE and then we break lip-sync. We prefer to let the jitterbuffers drain with
the current lip-sync instead.
2009-08-11 02:30:47 +01:00
Wim Taymans
d2ef095b80 rtpbin: only reconsider once for BYE
When iterating the sources of a BYE packet, don't signal a reconsideration for
each of them but signal after we handled all sources.
2009-08-11 02:30:47 +01:00
Olivier Crête
e8c6bcdf8d rtpsession: Free conflicting addresses on finalize 2009-08-11 02:30:46 +01:00
Wim Taymans
428368b44a rtpbin: use new method for netaddress to string 2009-08-11 02:30:46 +01:00
Wim Taymans
512ba93159 rtpbin: do better cleanup of the src ghostpads
Connect to the pad-removed signal of the ptdemux elements so that we remove the
ghostpads for them. Fixes cleanup when going to NULL as well as when releasing
the sinkpads.

Fixes #561752
2009-08-11 02:30:46 +01:00
Wim Taymans
d7a8663e05 rtpsession: add a comment 2009-08-11 02:30:46 +01:00
Wim Taymans
c53e595d23 rtpbin: add SDES property
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
2009-08-11 02:30:46 +01:00
Wim Taymans
9f330992f5 rtpbin: add SDES property that takes GstStructure
Remove all individual SDES properties and use one sdes property that takes a
GstStructure instead. This will allow us to add more custom stuff to the SDES
messages later.
2009-08-11 02:30:46 +01:00
Wim Taymans
d8496fb105 rtpbin: removed old gstrtpclient 2009-08-11 02:30:45 +01:00
Branko Subasic
779f67adc4 rtpbin: add support for buffer-list
Add support for sending buffer-lists.
Add unit test for testing that the buffer-list passed through rtpbin.

fixes #585839
2009-08-11 02:30:45 +01:00
Tim-Philipp Müller
c5793a6a45 Make build without warnings with debugging disabled 2009-08-11 02:30:45 +01:00
Olivier Crête
cf873498d2 rtpbin: Transform the right session sdes message
Fixes #584165
2009-08-11 02:30:45 +01:00
Olivier Crête
dee142a945 Add ssrc to application/x-rtp-source-sdes structure 2009-08-11 02:30:45 +01:00
Wim Taymans
bf15048f42 rtpsouce: the network address is in network order
Bring the network address in netowkr byte order to the host order.
2009-08-11 02:30:45 +01:00
Wim Taymans
91eef69131 rtpsource: byteswap the port from GstNetAddress
Since the port in GstNetAddress is in network order we might need to byteswap it
before adding it to the source statistics.
2009-08-11 02:30:45 +01:00
Wim Taymans
51251d0fa8 rtpbin: remove ptdemux ghostpads 2009-08-11 02:30:44 +01:00
Wim Taymans
57653143c3 tests: add receive rtpbin unit test 2009-08-11 02:30:44 +01:00
Wim Taymans
7d9c2d20df rtpbin: add to new signal to remove SSRC pads 2009-08-11 02:30:44 +01:00
Ali Sabil
6c684e59c6 ssrcdemux: emit signal when pads are removed
Add action signal to clear an SSRC in the ssrc demuxer.
Add signal to notify of removed ssrc.

See #554839
2009-08-11 02:30:44 +01:00
Wim Taymans
48872d8215 rtpbin: use our ghostpads instead of its target
Since we keep a reference to our ghostpads, we can use them to track sessions.
This avoid us having to mess with the target of the ghostpad.
2009-08-11 02:30:44 +01:00
Wim Taymans
02b34602c4 tests: more rtpbin checks 2009-08-11 02:30:44 +01:00
Wim Taymans
901b7f3b69 rtpbin: don't warn when getting request pads twice
Allow getting the request pads multiple times, just return the previously
created pads.
2009-08-11 02:30:44 +01:00
Wim Taymans
0ae6e3603b rtpsource: add RTP and RTCP source address
Add the RTP and RTCP sender addresses in the stats structure.
2009-08-11 02:30:44 +01:00
Wim Taymans
62727e8fab rtpsession: reuse source code for SDES
Reuse the RTPSource object property instead of duplicating code.
2009-08-11 02:30:44 +01:00
Wim Taymans
232624c908 tests: add more rtpbin tests 2009-08-11 02:30:44 +01:00
Wim Taymans
1710d8a3a5 tests: add rtpbin unit test
Add the beginnings of an rtpbin unit test
Add some more stuff to .gitignore
2009-08-11 02:30:43 +01:00
Wim Taymans
1719af9113 rtpbin: set target state on new elements
Set the state on newly added elements to the state of the parent.
Add some debug info and do some cleanups
2009-08-11 02:30:43 +01:00
Wim Taymans
9c92ee6209 rtpbin: unref requests pads after releasing 2009-08-11 02:30:43 +01:00
Olivier Crête
a1c0bb2488 rtpbin: Implement releasing the streams
See #561752
2009-08-11 02:30:43 +01:00
Olivier Crête
e77542d350 rtpbin: Keep jb signals handler
Keep the signal handlers so they can be disconnected at release time

See #561752
2009-08-11 02:30:43 +01:00
Wim Taymans
59d0590cd7 rtpbin: use the right lock for the sessions
Use the right lock when iterating the sessions.
2009-08-11 02:30:42 +01:00
Olivier Crête
a9d6f3558c rtpbin: Free session if request pads are released
Free the session when all the request pads are released.
Don't mess with the session list in free_session as it is called from a foreach
on that list.
Set the state of the upstream element to NULL first.

See #561752
2009-08-11 02:30:42 +01:00
Olivier Crête
46388b767f rtpbin: Implement relasing of the rtp recv pad 2009-08-11 02:30:42 +01:00
Olivier Crête
3509098468 rtpbin: Implement releasing of rtp send pads 2009-08-11 02:30:42 +01:00
Olivier Crête
2f6e9d7bf2 rtpbin: Implement release of the recv rtcp pad
See #561752
2009-08-11 02:30:42 +01:00
Olivier Crête
47d4bb90c1 rtpbin: Implement releasing of rtcp src pad
See #561752
2009-08-11 02:30:41 +01:00
Wim Taymans
11607c4d63 rtpssrcdemux: drop unexpected RTCP packets
We usually only get SR packets in our chain function but if an invalid packet
contains the SR packet after the RR packet, we must not fail but simply ignore
the malformed packet.

Fixes #581375
2009-08-11 02:30:41 +01:00
Olivier Crete
3482b47666 rtpsouce: make WARNING into LOG
Since neither rtpmanager nor any of the payloaders properly implement
pad allocation, there is no way for the rtpmanager to inform downstream elements
of the new SSRC if there is an SSRC collision. So the warning is emitted all the
time and it is confusing.

Fixes #580144
2009-08-11 02:30:41 +01:00