Add GstVaapiEncodeMPEG2 element object. The actual plug-in element
is called "vaapiencode_mpeg2".
Valid properties:
- rate-control: rate control mode (default: cqp - constant QP)
- bitrate: desired bitrate in kbps (default: auto-calculated)
- key-period: maximal distance between two key frames (default: 30)
- max-bframes: number of B-frames between I and P (default: 2)
- quantizer: constant quantizer (default: 8)
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add GstVaapiEncodeH264 element object. The actual plug-in element
is called "vaapiencode_h264".
Valid properties:
- rate-control: rate control mode (default: none)
- bitrate: desired bitrate in kbps (default: auto-calculated)
- key-period: maximal distance between two key frames (default: 30)
- num-slices: number of slices per frame (default: 1)
- max-bframes: number of B-frames between I and P (default: 0)
- min-qp: minimal quantizer (default: 1)
- init-qp: initial quantizer (default: 26)
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add initial API for video encoding: only basic interfaces and small
encoder objects are implemented so far.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
GstBitWriter provides a bit writer that can write any number of bits
to a pre-allocated memory buffer. Helper functions are also provided
to write any number of bits from 8, 16, 32 and 64 bit variables.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Extend GstVaapiContextInfo structure to hold the desired rate control
mode for encoding purposes. For decoding purposes, this field is not
used and it is initialized to GST_VAAPI_RATECONTROL_NONE.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Add GstVaapiRateControl types and GType values in view to supporting
rate controls for encoding. This is meant to be used for instance in
GstVaapiContext.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix build when Wayland headers don't live in plain system include dirs
like /usr/include but rather in /usr/include/wayland for instance.
Original patch written by Dominique Leuenberger <dimstar@opensuse.org>
https://bugzilla.gnome.org/show_bug.cgi?id=712282
This library is using symbols that don't exist in GStreamer 0.10 so
it needs to link to built-in implementation (libgstvaapi-videoutils).
https://bugzilla.gnome.org/show_bug.cgi?id=712282
Signed-off-by: Ross Burton <ross.burton@intel.com>
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Destroy VPP output surface pool on exit. Also avoid a possible crash
in double-free situation caused by insufficiently reference counted
array of formats returned during initialization.
Fix advanced deinterlacing modes with VPP to track only up to 2 past
reference buffers. This used to be 3 past reference buffers but this
doesn't fit with the existing decode pipeline that only has 4 extra
scratch surfaces.
Also optimize references tracking to be only enabled when needed, i.e.
when advanced deinterlacing mode is used. This means that we don't
need to track past references for basic bob or weave deinterlacing.
In "mixed" interlaced streams, the buffer contains additional flags that
specify whether the frame contained herein is interlaced or not. This means
that we can alternatively get progressive or interlaced frames. Make sure
to disable deinterlacing at the VPP level when the source buffer is no longer
interlaced.
Fix memory leaks with advanced deinterlacing, i.e. when we keep track
of past buffers. Completely reset the deinterlace state, thus destroying
any buffer currently held, on _start(), _stop() and _destroy().
The <gst/vaapi/gstvaapicontext.h> header was removed from the public
set of APIs. So, don't make public headers (gstvaapidecoder.h) depend
on private files.
Port vaapipostproc element to GStreamer 1.2. Support is quite minimal
right now so that to cope with auto-plugging issues/regressions. e.g.
this happens when the correct set of expected caps are being exposed.
This means that, currently, the proposed caps are not fully accurate.
Fix basic deinterlacing flags provided to gst_vaapi_set_deinterlacing()
for the first field. Render flags were supplied instead of the actual
deinterlacing flags (deint_flags).
Fix GstBaseTransform::transform_caps() implementation to always return
the complete set of allowed sink pad caps (unfixated) even if the src
pad caps we are getting are fixated. Rationale: there are just so many
possible combinations, and it was wrong to provide a unique set anyway.
As a side effect, this greatly simplifies the ability to derive src pad
caps from fixated sink pad caps.
Add gst_vaapi_fitler_set_deinterlacing_references() API to submit the
list of surfaces used for forward or backward reference in advanced
deinterlacing mode, e.g. Motion-Adaptive, Motion-Compensated.
The list of surfaces used as deinterlacing references shall be live
until the next call to gst_vaapi_filter_process().
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Fix deinterlacing flags to make more sense. The TFF (top-field-first)
flag is meant to specify the organization of reference frames used in
advanced deinterlacing modes. Introduce the more explicit flag TOPFIELD
to specify that the top-field of the supplied input surface is to be
used for deinterlacing. Conversely, if not set, this means that the
bottom field of the supplied input surface will be used instead.
Add a couple of helper functions:
- gst_vaapi_filter_has_operation(): checks whether the VA driver
advertises support for the supplied operation ;
- gst_vaapi_filter_use_operation(): checks whether the supplied
operation was already enabled to its non-default value.
The user-defined destroy notify function is meant to be called only when
the surface proxy was fully released, i.e. once it actually released the
VA surface back to the underlying pool.
Fix GstVaapiPicture, GstVaapiSlice and GstVaapiSurfaceProxy initialization
sequences to have the expected default values set beforehand in case of an
error raising up further during creation. i.e. make it possible to cleanly
destroy those partially initialized objects.
https://bugzilla.gnome.org/show_bug.cgi?id=707108
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
There are situations where gst_video_decoder_flush() is called, and
this subsequently produces a gst_video_decoder_reset() that kills the
currently active GstVideoCodecFrame. This means that it no longer
exists by the time we reach GstVideoDecoder::finish() callback, thus
possibly resulting in a crash if we assumed spare data was still
available for decode (current_frame_size > 0).
Try to honour GstVideoDecoder::reset() behaviour from GStreamer 1.0
that means a flush, thus performing the actual operations there like
calling gst_video_decoder_have_frame() if pending data is available.
Review all interactions between the main video decoder stream thread
and the decode task to derive a correct sequence of operations for
decoding. Also avoid extra atomic operations that become implicit under
the GstVideoDecoder stream lock.
Fix hard reset for seek cases by flushing the GstVaapiDecoder queue
and completely purge any decoded output frame that may come out from
it. At this stage, the GstVaapiDecoder shall be in a complete clean
state to start decoding over new buffers.
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
vaapidecode used to wait up to one second past the expected time of
presentation for the last decoded frame. This is not realistic in
practice when it comes to video pause/resume. Changed behaviour to
unconditionnally wait for a free VA surface prior to continuing the
decoding. The decode task will continue pushing the output frames to
the downstream element while also reporting errors at the same time
to the main thread.
https://bugzilla.gnome.org/show_bug.cgi?id=707108
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
The srcpad caps exposed for GStreamer 1.2 were missing any useful info
like framerate, pixel-aspect-ratio, interlace-mode et al. Not to mention
that it relied on possibly un-initialized data. Fix srcpad caps to be
initialized from a sanitized copy of GstVideoDecoder output state caps.
Note: the correct way to expose the srcpad caps triggers an additional
issue in core GStreamer auto-plugging capabilities as the correct caps
to be exposed should be format=ENCODED with memory:VASurface caps feature
at the minimum. In some situations, we could determine the underlying
VA surface format, but this is not always possible. e.g. cases where it
is not allowed to expose the underlying VA surface data, or when the
VA driver implementation cannot actually provide such information.
Currently, the decoder only supports YUV 4:2:0 output. So, expose the
output formats for GStreamer 1.2 in caps to a realistic subset. This
means NV12, I420 or YV12 but also ENCODED if we cannot determine the
underlying VA surface format, or if it is actually not allowed to get
access to the surface contents.
Fix vaapidecode srcpad caps to only expose RGBA video format for the
meta:GstVideoGLTextureUploadMeta feature. That's only what is supported
so far. Besides, drop this meta from the vaapisink sinkpad caps since
we really don't support that for rendering.
https://bugzilla.gnome.org/show_bug.cgi?id=711828
Automatically detect GStreamer API version. The --with-gstreamer-api
configure option now defaults to "autodetect" and configure then tries
to derive the GStreamer API version from the highest version based on
what pkg-config --modversion would report.
https://bugzilla.gnome.org/show_bug.cgi?id=711657
Fix raw YUV data uploaded as in the following pipeline:
$ gst-launch-1.0 filesrc video.yuv ! videoparse ! vaapipostproc ! vaapisink
The main reason why it failed was that the videoparse element simply
allocates GstBuffer with raw data chunk'ed off the sink pad without
any prior knowledge of the actual frame info. i.e. it basically just
calls gst_adapter_take_buffer().
We could avoid the extra copy performed in vaapipostproc if the videoparse
element was aware of the downstream pool and bothers copying line by
line, for each plane. This means that, for a single frame per buffer,
the optimizatin will be to allocate the video buffer downstream, map
it, and copy each line that is coming through until we need to fills
in the successive planes.
Still, optimized raw YUV uploads already worked with the following:
$ gst-launch-1.0 videotestsrc ! vaapipostproc ! vaapisink
https://bugzilla.gnome.org/show_bug.cgi?id=711250
[clean-ups, fixed error cases to unmap and unref outbuf]
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
If the currently selected deinterlacing method is not supported by the
underlying hardware, then try to downgrade the method to a supported one.
At the minimum, basic bob-deinterlacing shall always be supported.
Allow basic bob-deinterlacing to work when VPP is enabled. Currently,
this only covers bob-deinterlacing when the output pixel format is
explicitly set.
Add initial support for basic scaling with size specified through the
"width" and "height" properties. If either user-provided dimension is
zero and "force-aspect-ratio" is set to true (the default), then the
other dimension is scaled to preserve the aspect ratio.
If VPP is available, we always try to implicitly convert the source
buffer to the "native" surface format for the underlying accelerator.
This means that no optimization is performed yet to propagate raw YUV
buffers to the downstream element as is, if VPP is available. i.e. it
will always cause a color conversion.
