If the pad block never happens because there is no data flow at all, the
callback is never fired and the reference is never released. This causes a
reference cycle between the pad and element, so valgrind is not very vocal
about it (memory is still reachable).
The bins' getcaps was bypassing the inner elements, and thus
failing to account for the caps transformations they allow,
which caused YUV video pipelines to fail with ximagesink, which
does not support YUV, even though the convenience bin includes
a colorspace converter for just this purpose.
https://bugzilla.gnome.org/show_bug.cgi?id=660816
The new code was checking for a prefix, and would find video/
first. Check in two passes, first checking for a perfect match,
and falling back to a prefix check if nothing was found.
https://bugzilla.gnome.org/show_bug.cgi?id=657261
The fact that a decoder is not compatible with the fixed sink
is currently happenning in the case where we have hardware accelerated
video decoders on the system (especially vaapi elements that are actually plugged),
and the user is providing a sink that doesn't support the surface.
A simple example that shows how it used to crash on a system where gstreamer-vaapi
is installed:
gst-launch playbin2 video-sink=xvimagesink uri=/codec/supported/by/vaapi
What we are now doing in this case, is avoid using the accelerated
decoder and plug a "normal" decoder instead (if avalaible).
This commit doesn't handle the case where we have hardware accelerated
demuxing.
With unfixed caps we can't reliably decide if the final caps
are going to be "raw" (e.g. supported by a sink) or not.
We will get here again later when the caps are fixed.
If subdrained isn't initialized to FALSE then a chain might think
that its group is drained when in fact it's not and this can cause
a switch too early or even cause a deadlock.
This reverts commit b0b4e286c8.
We agreed that the previous (pre-.35) behaviour is broken and a bug and the
current behaviour is correct, deterministic and allows the application to
handle stuff properly while the old behaviour can't be handled properly by
applications and just worked in some applications by luck.
The solution to the problem that was solved by relying on the old, broken
behaviour would be, to make decodebin2/playbin2 more aware of decoders and
improve the autoplugging of decoders by considering the caps supported by the
sink instead of just using something with the highest rank.
See bug #656923.
Fixes regression since 0.10.33 where sinks that can cope with non raw
caps or custom caps are not autoplugged if there's a sink configured
with the properties video-sink and audio-sink which cannot handle
the stream. This change checks for compatibility on the configured one
and use it if success. Otherwhise it tries with the found factories.
This reverts commit a22faad18a. Instead
of disabling subtitles completelly when video stream have custom caps,
just let the sutbtileoverlay cope with them as now it's able to.
Implement handling of non raw video streams by avoiding colorspace
elements and autoplugging a compatible renderer if available. Fallback
to passthrough if no compatible renderer is found.
Only log in debug log for now, since the check is a bit
half-hearted, its purpose is mostly to make sure people
use gst_filename_to_uri() or g_filename_to_uri().
https://bugzilla.gnome.org/show_bug.cgi?id=654673
g_value_get_object() does not give us our own ref.
Fixes "Trying to dispose object "flacparse", but it still has a parent "registry0".
You need to let the parent manage the object instead of unreffing the object directly."
and similar warnings.
https://bugzilla.gnome.org/show_bug.cgi?id=658416
This is done by adding a capsfilter after every parser/converter that contains
all possible caps supported by downstream elements. A capsfilter is necessary
here because the decoder is only selected after the parser selected a format
and the parser can't know what downstream would support otherwise.
This reverts commit 105814e2c7.
The general consensus seems to be that we should revert this for
now. If such behaviour is desired, we should probably enable it
via a flag. And maybe use the scaletempo plugin instead.
Instead of just assuming all pads are created at the same time,
remember which ones are actually new (via ->pending_blocked_pads).
This allows the following use-case to properly work:
* Upstream starts with audio-only
* Only that pad gets data, blocks and a real audio sink is created
* Upstream laters adds a video stream
* A new pad is requested, blocks and reconfiguration kicks in in
order to add a new real video sink
When we don't have specific {audio|video|text}-sink properties, don't
set them on playsink when reconfiguring.
If we do that, we end up setting the previous configured sink to
GST_STATE_NULL resulting in any potentially pending push being returned
with GST_FLOW_WRONG_STATE which will cause the upstream elements to
silently stop.
https://bugzilla.gnome.org/show_bug.cgi?id=655279
When we have a multi-stream (i.e. audio and video) input and the demuxer
adds/removes pads for a new stream (common in a mpeg-ts stream when the
program stream mapping is updated), the algorithm for EOS handling was
previously wrong (it would only drop the EOS of the *last* pad but would
let the EOS on the other pads go through).
The logic has only been changed a tiny bit for EOS handling resulting in:
* If there is no next group, let the EOS go through
* If there is a next group, but not all pads are drained in the active
group, drop the EOS event
* If there is a next group and all pads are drained, then the ghostpads
will be removed and the EOS event will be dropped automatically.
This allows us to make parsers accept both parsed and unparsed input
without decodebin plugging them in a loop until things blow up, ie.
without affecting applications that still use the old playbin or the
old decodebin.
(Making parsers accept parsed input is useful for later when we want
to use parsers to convert the stream-format into something the decoder
can handle. It's also much more convenient for application authors
who can plug parsers unconditionally in transcoding pipelines, for
example).
This is especially needed when switching between a non-sparse and sparse
video stream, see bug #537382. It also lowers the time needed for switching
between streams a bit.
In particular, in audio only cases whose (estimated) metadata provides bitrate
information, the buffer-size based on such bitrate (and buffer-duration)
will be much more reasonable than queue2 default buffer-size.
For streams at low bitrates we need to set a limit in time because the limit
in bytes might not reached too late, sometimes more than 30 seconds.
This limit can only be set if upstream is seekable (see #584104)
Closes#647769
These reconfigure based on the caps and plugin in converters if
necessary. This also makes switching between compressed and raw
streams work flawlessly without loosing the states of any element
somewhere or having running time problems.
Before playbin2 would use different selectors for raw audio and
compressed audio (and the same for video) and used different
pads from playsink. This made the involved logic much more
complex and was not implemented completely in playsink, which
made it impossible to support files with a compressed and
uncompressed stream that is support by the sink.
playbin2 handles raw/non-raw streams the same now and the
decision is left to playsink, which now can also handle
caps changes from raw to non-raw and the other way around.
Fixes bug #632788.
Remove the android/ top dir
Fixe the Makefile.am to be androgenized
To build gstreamer for android we are now using androgenizer which generates the
needed Android.mk files.
Androgenizer can be found here:
http://git.collabora.co.uk/?p=user/derek/androgenizer.git
In addition to ensuring that an element we want to select in
autoplug-select can enter the READY state, we also now check if it can
accept the caps we wish to plug it for. This is handy for sinks that
need to perform a probe to figure out whether they can actually handle a
given format.
Post better error messages in case typefind/decodebin2 are missing or
could not be loaded for some reason (e.g. because they inadvertently
got blacklisted).
https://bugzilla.gnome.org/show_bug.cgi?id=644892
Parsers are the only element class that are not changing the data and
could lead to an infinite loop. Other element classes like demuxers,
e.g. id3demux, can be used multiple times in a row and sometimes are.
Previously we only checked against the raw caps but we should also
check against the return value of autoplug-continue. Additionally fix
a thread-safety issue with accessing the raw caps.
Add "source-setup" signal for convenience and discoverability. No need
to figure out "notify::source", look up the notify callback signature,
then do an g_object_get() to get the source element..
https://bugzilla.gnome.org/show_bug.cgi?id=626152
...instead of copying the array. Returning NULL will result
in the original factories array to be used and prevents a useless
array copy in most use cases.
...instead of copying the array. Returning NULL will result
in the original factories array to be used and prevents a useless
array copy in most use cases.
Add notes about the behaviour if multiple signal handlers are connected.
For most autoplug-* signals only the first signal handler will ever
be invoked.
Also add to the autoplug-sort docs that the signal handler can return NULL
to specify that the order should change and other handlers get the chance
to sort the array.
This lock is taken when activating a group, which could result in
calling the autoplug-continue callback, which also needs this lock
to access the sinks.
See bug #642174.
Don't build merge the caps of all sinks but check them one-by-one
until one supports the caps. Also get reffed caps from the sinkpads
instead of a writable copy and add debug output if a sink claims to
support ANY caps.
