Fix regression introduced by bd866479, the query after decide_allocation()
always needs a pool in the first slot.
Signed-off-by: Víctor Manuel Jáquez Leal <victorx.jaquez@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=748559
This patch only intends to improve readability: in the method
gst_vaapi_window_wayland_sync() the if/do instructions are squashed into a
single while loop.
Also renames the frame_redraw_callback() callback into frame_done_callback(),
which is a bit more aligned to Wayland API.
The Wayland compositor may still use the buffer when the frame done
callback is called.
This patch destroys the frame (which contains the buffer) until the
release callback is called. The draw termination callback only controls
the display queue dispatching.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
https://bugzilla.gnome.org/show_bug.cgi?id=747492
This a cosmetic refactor: gst_vaapidecode_internal_flush() removes its only
label; gst_vaapidecode_finish() is more readable and gst_vaapidecode_purge()
shares the same error message of gst_vaapidecode_internal_flush() when flush
fails.
Add the method gst_vaapidecode_purge(). This method releases the
flushed frames from the decoder.
This new method add more readablity to gst_vaapidecode_destroy()
When a frame is rejected by downstream, the message is logged twice. This
patch removes one of those logging messages.
Also, the reject of a frame doesn't mean an alarming error. This patch demotes
the log message from error to info.
This is a mirror of h265parse element in upstream gst-plugins-bad.
There could be additional patches but all should go to upstream.
This is for making development faster.
Note: vaapiparse_h265 will get build only for GStreamer version >= 1.4
Based up on the value of uniform_spacing_flag in Picture Parameter Set,
the tile column width and tile row height should be calculated.
Equations: 6-1, 6-2
Tiled video Descriptions: 7.3.2.3, 7.4.3.3
-- Set NoRaslOutputFlag based on EOS and EOB Nal units
-- Fix PicOutputFlag setting for RASL picture
-- Fix prev_poc_lsb/prev_poc_msb calculation
-- Drop the RASL frames if NoRaslOutputFlag is TRUE for the associated IRAP picture
-- Fixed couple of crashes and added cosmetics
There is a race condition where g_drm_device_type can be left set to
DRM_DEVICE_RENDERNODES when it shouldn't.
If thread 1 comes in and falls into the last else statement setting up both
RENDERNODES and LEGACY types. And begins to process the first type (RENDERNODES),
it sets g_drm_device_type = RENDERNODES.
Now when thread 2 comes in and sees g_drm_device_type is RENDERNODES, it queues
up that type to be tried but then encounters the lock and has to wait until the
first thread finishes. Once the lock is acquired it will then proceed to ONLY try
RENDERNODES and fail it. But it doesn't try LEGACY. And from then on, all future
attempts will only try RENDERNODES.
So to avoid this situation I have simply moved the acquisition of the lock higher
up in the attached patch.
https://bugzilla.gnome.org/show_bug.cgi?id=747914
The problem with this is that creating the filter causes the display to
be selected, and the caps query happens while linking the element. So,
if the downstream or upstream element is using a specific display
object, it won't be propagated correctly to the postproc as it already
has a display at this point.
https://bugzilla.gnome.org/show_bug.cgi?id=747945
The video pool can be accessed with the display lock held, for example,
when releasing a buffer from inside vaapisink_render, but allocating
a new object can may also take the display lock. Which means a possible
deadlock.
https://bugzilla.gnome.org/show_bug.cgi?id=747944
vaapisink inherits from GstVideoSink, in order to use its functionality (such
as ::show-preroll-frame property), we should use its vmethod show_frame(),
rather than call ourselves render() and preroll().
This patch adds the signal ::handoff and the property signal-handoffs. If the
property is set TRUE, the signal ::handoff is emitted just after the buffer is
rendered.
Based on Zhao Halley <halley.zhao@intel.com>
https://bugzilla.gnome.org/show_bug.cgi?id=747905
The support for buffer exports in VA-API was added in version 0.36. These
interfaces are for interop with EGL, OpenCL, etc.
GStreamer-VAAPI uses it for a dmabuf memory allocator. Though, gstreamer-vaapi
has to support VA-API versions ranging from 0.30.4, which doesn't support it.
This patch guards all the buffer exports handling (and dmabuf allocator) if
the detected VA-API version is below 0.36.
https://bugzilla.gnome.org/show_bug.cgi?id=746405
We get one reference when the frame is passed to decode_handle_frame()
and create another one in gst_vaapi_decoder_push_frame().
Usually the frame is handled in gst_vaapidecode_push_decoded_frame().
Here the frame is always released twice:
gst_video_decoder_finish_frame() + gst_video_codec_frame_unref() or
gst_video_decoder_drop_frame() + gst_video_codec_frame_unref().
In gst_vaapidecode_reset_full() both references to the frame must be
released as well.
Signed-off-by: Víctor Manuel Jáquez Leal <vjaquez@igalia.com>
https://bugzilla.gnome.org/show_bug.cgi?id=743226
The member size in GstMpeg4Packet is gsize which is unsigned, which cannot be
less than zero. Hence this pre-condition test is a no-op. This patch removes
that code.
https://bugzilla.gnome.org/show_bug.cgi?id=747312
slice_type in slice_param is defined as (char *), but it is compared against a
signed integer. clang complains about this comparison.
This patch casts the variable.
https://bugzilla.gnome.org/show_bug.cgi?id=747312
The symbol GstVaapiCodedBuffer is already defined in
gst-libs/gst/vaapi/gstvaapicodedbuffer.h which is loaded, at the end, by
gstvaapiencoder_objects.h. Clang complains about the symbol re-definition.
This patch removes that redefinition.
https://bugzilla.gnome.org/show_bug.cgi?id=747312
The member value in frame_rate_tab is float, the result of the abs() function
should be float too. But abs() only manages integers.
This patch replaces abs() with fabsf() to handle correctly the possible floats
values.
https://bugzilla.gnome.org/show_bug.cgi?id=747312
87f4a7e: bytereader: add gst_byte_reader_peek_sub_reader() and _get_sub_reader()
7d8ba7a: bytereader: use unchecked inline variant for get_remaining in more places
2528ea6: bytereader: add gst_byte_reader_masked_scan_uint32_peek
2b92a67: h264parse: reset the parser information when caps changes
05eee86: codecparsers: Indent file
e27a38b: codecparsers: Add READ_UE_MAX macro
2036471: Constify some static arrays everywhere
The support for GStreamer 1.0 has been obsoleted in 0.5.10 release.
GStreamer 1.2 is the a minimal requirement for building the gstreamer-vaapi.
This patch removes all the pre-processor conditional code compilation guarded
for gstreamer-1.0.
Thus, all the video converters were removed too.
https://bugzilla.gnome.org/show_bug.cgi?id=745728
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
The purpose of gstcompat.h is to couple the API differences among
gstreamer-1.0 and gstreamer-0.10. Since gstreamer-0.10 is obsolete, the code
in this compatibility layer shall be removed.
Nevertheless, the gstcompat.h header should be kept, if new incompatibilites
appear in the future, but it shall live in gst/vaapi, not in gst-libs.
This patch removes the crumbs defined gstcompat.h and moves it to gst/vaapi.
In order to avoid layer violations, gstcompat.h includes sysdeps.h and all
the includes in gst/vaapi of sysdeps.h are replaced with gstcompat.h
https://bugzilla.gnome.org/show_bug.cgi?id=745728
Signed-off-by: Gwenole Beauchesne <gwenole.beauchesne@intel.com>
Signed-off-by: Sreerenj Balachandran <sreerenj.balachandran@intel.com>
