Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/gstcontroller.c: (gst_controller_unset),
(gst_controller_unset_all):
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node):
Save last synced value from the list to continue searching from there
in future syncs. This speeds everything up a bit.
Original commit message from CVS:
reviewed by: Stefan Kost <ensonic@users.sf.net>
* libs/gst/controller/gstcontroller.c: (gst_control_point_compare),
(gst_control_point_find), (gst_controlled_property_new),
(gst_control_point_free), (gst_controlled_property_free),
(gst_controller_set), (gst_controller_set_from_list),
(gst_controller_unset), (gst_controller_unset_all),
(gst_controller_sync_values):
* libs/gst/controller/gstcontroller.h:
* libs/gst/controller/gstcontrollerprivate.h:
* libs/gst/controller/gstinterpolation.c:
(gst_controlled_property_find_control_point_node),
(interpolate_none_get), (interpolate_trigger_get):
Add a new private GstControlPoint struct which "inherits" from
GstTimedValue to allow different interpolators to store internal
values next to each control point. From the outside everything is
still a GstControlPoint so we don't loose binary compatibility.
Also fixup all the GValue handling to not leak GValues or list nodes.
* tests/check/libs/controller.c: (GST_START_TEST):
Free the list nodes and GValues in the controller_misc test.
Original commit message from CVS:
* libs/gst/controller/gstcontroller.c:
(gst_controlled_property_set_interpolation_mode):
* libs/gst/controller/gstinterpolation.c:
Don't crash if someone tries to set an interpolation mode that
is invalid or that isn't supported yet. Fixes#422295.
* tests/check/libs/controller.c: (GST_START_TEST),
(gst_controller_suite):
Add a test case for the above.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_chain):
Properly set the last_stop position on GstSegment. This will only happen
if there is a buffer to push out.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_buffer_alloc):
always_in_place does not mean that the sink and source caps are the
same! Make sure we don't blindly proxy the buffer_alloc in this case.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_query_latency),
(gst_base_src_default_query), (gst_base_src_get_range):
* libs/gst/base/gstbasesrc.h:
API: gst_base_src_query_latency(). Added method so that subclasses can
easily get the latency values of the base source class.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_activate):
Make sure streaming has finished before calling the ::stop() vfunc,
since that vfunc might clear state which is being used in the
streaming thread. This fixes a race that caused crashes in
audioresample when shutting down a pipeline (#420106).
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
Remove bogus addition for API I didn't end up keeping.
* libs/gst/base/gstbasesrc.h:
Mention Since: 0.10.13 in the documentation.
Add the API keyword to the previous ChangeLog entry.
Original commit message from CVS:
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesrc.c: (gst_base_src_class_init),
(gst_base_src_default_prepare_seek_segment),
(gst_base_src_prepare_seek_segment), (gst_base_src_perform_seek):
* libs/gst/base/gstbasesrc.h:
Allow basesrc derived classes to execute seeks in other formats
by providing a prepare_seek_segment vmethod. Sub-classes can choose
to prepare the GstSegment in any format that their perform_seek method
will be able to understand. The default implementation provides the
old behaviour of attempting to convert the seek offsets to the
configured native format.
Original commit message from CVS:
* gst/gstelement.c: (gst_element_get_state_func):
Don't output the same debug statement twice.
* libs/gst/base/gstadapter.c: (gst_adapter_try_to_merge_up),
(gst_adapter_peek), (gst_adapter_take_buffer):
Optimise the case where we have buffers at the head of the queue that
can be joined quickly (because they're contiguous sub-buffers) by
merging them together rather than copying data out into new memory.
* gst/parse/grammar.y:
* tests/check/pipelines/parse-launch.c:
Fix a leak in an error path for parse_launch, and add a check
for it to the testsuite.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event):
Fix leak caused when refusing newsegment after EOS.
* plugins/elements/gstfakesink.c: (gst_fake_sink_class_init),
(gst_fake_sink_init), (gst_fake_sink_set_property),
(gst_fake_sink_get_property), (gst_fake_sink_preroll),
(gst_fake_sink_render), (gst_fake_sink_change_state):
* plugins/elements/gstfakesink.h:
Add num-buffers property to make the element generate EOS after a
configurable amount of buffers.
API: fakesink::num-buffers property.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Fix GstBus leak in test.
Test for fakesink num-buffers.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c:
(gst_base_sink_queue_object_unlocked), (gst_base_sink_event),
(gst_base_sink_change_state):
Don't accept anything after an EOS, return UNEXPECTED instead.
* tests/check/elements/fakesink.c: (GST_START_TEST),
(fakesink_suite):
Unit test for new EOS behaviour.
Original commit message from CVS:
* docs/random/ensonic/dynlink.txt:
More work on proposal for new core api.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasetransform.h:
API: GST_BASE_TRANSFORM_LOCK/UNLOCK added
* libs/gst/controller/gstcontroller.c:
(on_object_controlled_property_changed),
(gst_controller_sync_values),
(gst_controller_set_interpolation_mode):
* libs/gst/controller/gstcontroller.h:
Less verbose logging add docs for unimplemented parts and correctly
return when using unavailable parts.
Original commit message from CVS:
* libs/gst/base/gstadapter.c: (gst_adapter_take_buffer):
Make take_buffer a bit quicker by removing redundant checks
caused by calling gst_adapter_take.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range),
(gst_base_src_loop):
Only push the segment events in the PLAYING state for live sources.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_get_range):
Handle errors from the clock sync better, only UNSCHEDULED indicates a
WRONG_STATE and can silently pause the task. All other cases should
error out.
Original commit message from CVS:
* libs/gst/base/gstbasesink.c: (gst_base_sink_set_flushing),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.c: (gst_base_src_perform_seek),
(gst_base_src_default_event), (gst_base_src_unlock_stop),
(gst_base_src_deactivate):
* libs/gst/base/gstbasesrc.h:
Add ::unlock_stop to basesrc and basesink. This allows an opportunity
for sub-classes to correctly clear any state they set trying to
unlock, such as clearing out unlock commands from a command fd.
* plugins/elements/gstfdsink.c: (gst_fd_sink_class_init),
(gst_fd_sink_render), (gst_fd_sink_unlock),
(gst_fd_sink_unlock_stop):
* plugins/elements/gstfdsrc.c: (gst_fd_src_class_init),
(gst_fd_src_init), (gst_fd_src_unlock), (gst_fd_src_unlock_stop),
(gst_fd_src_create), (gst_fd_src_get_size), (gst_fd_src_do_seek):
Implement unlock_stop in fdsrc and fdsink.
Implement seeking in fdsrc when a seekable fd is passed, as in
gst-launch-0.10 fdsrc ! ... ! xvimagesink < /path/to/file
Original commit message from CVS:
* docs/gst/gstreamer-sections.txt:
Add new element field and method.
* gst/gstbin.c: (gst_bin_class_init), (gst_bin_init),
(bin_remove_messages), (gst_bin_add_func), (gst_bin_remove_func),
(gst_bin_recalc_state), (gst_bin_get_state_func),
(gst_bin_element_set_state), (gst_bin_change_state_func),
(gst_bin_continue_func), (bin_bus_handler),
(bin_push_state_continue), (bin_handle_async_start),
(bin_handle_async_done), (gst_bin_handle_message_func):
Make async state changes a bit smarter by using new ASYNC_START and
ASYNC_DONE messages. This reduces the number of times we run the state
recalculation thread.
Don't change state of element with a pending ASYNC_START message.
Deprecate STATE_DIRTY messages.
* gst/gstelement.c: (gst_element_init), (gst_element_send_event),
(gst_element_get_state_func), (gst_element_continue_state),
(gst_element_lost_state), (gst_element_set_state_func),
(gst_element_change_state):
* gst/gstelement.h:
Keep the state that was last set by the app in a new element field.
Don't allow state changes when handling an element event.
Post ASYNC_START and ASYNC_DONE messages.
Change lost_state so that we go to PAUSED and wait for the parent to set
us to PLAYING again (so latency calculation can be performed)
Export gst_element_change_state() method so that subclasses can use it.
API: gst_element_change_state()
API: GST_STATE_TARGET
* gst/gstpipeline.c: (gst_pipeline_class_init),
(reset_stream_time), (gst_pipeline_change_state),
(gst_pipeline_handle_message), (gst_pipeline_set_new_stream_time):
Using the new ASYNC_START message we can reset the base_time when
needed. This can then be used to implement base_time redistribution in
flushing seeks so that we can remove the explicit seek handling.
Perform latency query and configuration when going to PLAYING.
* libs/gst/base/gstbasesink.c: (gst_base_sink_commit_state),
(gst_base_sink_query), (gst_base_sink_change_state):
Post new ASYNC_START/ASYNC_DONE messages.
* tests/check/generic/sinks.c: (GST_START_TEST):
Fix test because the bin will not set the async element to PLAYING right
away.
* tests/check/gst/gstbin.c: (pop_async_done), (GST_START_TEST):
Make the message check a little stronger.
Handle ASYNC messages.
* tests/check/pipelines/cleanup.c: (GST_START_TEST):
* tests/check/pipelines/simple-launch-lines.c: (GST_START_TEST):
Expect ASYNC_DONE messages.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c:
(gst_base_transform_sink_eventfunc),
(gst_base_transform_handle_buffer), (gst_base_transform_chain),
(gst_base_transform_activate):
* libs/gst/base/gstbasetransform.h:
Add support for dropping buffers with custom GstFlowReturn.
Set DISCONT flags on outgoing buffers based on QoS, incomming DISCONT
buffers or dropped buffers.
* docs/libs/gstreamer-libs-sections.txt:
docs for new custom return code.
* plugins/elements/gstidentity.c: (gst_identity_transform_ip):
Use drop support in base class to implement drop-probability.
Original commit message from CVS:
* libs/gst/base/gstbasetransform.c: (gst_base_transform_init),
(gst_base_transform_check_get_range):
Implement a checkgetrange function instead of relying on the default
core behaviour that assumes we can operate in pull mode if we have a
getrange function. First step at fixing #385084.
Original commit message from CVS:
* gst/gstchildproxy.h:
* libs/gst/base/gstbasesink.h:
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasetransform.h:
More docs coverage and some ChangeLog surgery (add missing names)
Original commit message from CVS:
* docs/design/draft-latency.txt:
Small update.
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstbasesink.c: (gst_base_sink_class_init),
(gst_base_sink_get_latency), (gst_base_sink_query_latency),
(gst_base_sink_wait_clock), (gst_base_sink_send_qos),
(gst_base_sink_perform_qos), (gst_base_sink_queue_object_unlocked),
(gst_base_sink_chain_unlocked), (gst_base_sink_send_event),
(gst_base_sink_get_position), (gst_base_sink_query),
(gst_base_sink_change_state):
* libs/gst/base/gstbasesink.h:
API: gst_base_sink_query_latency() to let subclasses query the upstream
latency.
API: gst_base_sink_get_latency() to let subclasses query the configured
latency in the sink.
Implement query and set latency.
Update some docs.
As spotted by Will Newton <will dot newton at gmail dot com>: Make sure we
don't continue preroll when we are flushing. Fixes#405284.
* tests/check/pipelines/stress.c: (change_state_timeout),
(quit_timeout), (GST_START_TEST), (stress_suite):
Test for #405284.
Original commit message from CVS:
reviewed by: Tim-Philipp Müller <tim at centricular dot net>
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
Don't put the previously added destroy notify in the GstCollectData
struct as all it's padding is already used and we don't want to break
ABI. Instead put in the pad's GObject data for now. This should be
cleaned up for 0.11 (#402393).
Original commit message from CVS:
reviewed by: Wim Taymans <wim@fluendo.com>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_finalize),
(unref_data), (gst_collect_pads_add_pad),
(gst_collect_pads_add_pad_full):
* libs/gst/base/gstcollectpads.h:
API: Add function to specify a destroy notification for custom
GstCollectData when adding new pads in GstCollectPads (#402393).
Original commit message from CVS:
Patch by: David Schleef <ds at schleef dot org>
* docs/libs/gstreamer-libs-sections.txt:
* libs/gst/base/gstadapter.c: (gst_adapter_copy):
* libs/gst/base/gstadapter.h:
API: gst_adapter_copy() that can reduce the amount of memcpy when
getting data from the adapter. Fixes#388201.
Original commit message from CVS:
* libs/gst/check/gstcheck.c: (gst_check_abi_list):
Actually write ABI structs to the file specified in the GST_ABI
environment variable, as the message we print claims we would.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (gst_base_transform_activate):
Factor start/stop into this private function instead of partially
in activate functions and partially in the change_state function.
Fixes setup before the element has changed from READY->PAUSED, as
is the case in pull-mode pipelines.
(gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull): Refactor to use
gst_base_transform_activate().
(gst_base_transform_change_state): Removed, not needed any more.
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Truncate before fixating.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.c (gst_base_sink_negotiate_pull):
Don't set_caps() if the result of fixating is ANY, as it's not
supported, and not necessary in the case of a link with no
template caps on either side. Fixes tests/check/libs/basesrc in
some pull-mode tests.
Original commit message from CVS:
2007-01-12 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasetransform.c (_GstBaseTransformPrivate):
(gst_base_transform_init, gst_base_transform_sink_activate_push)
(gst_base_transform_src_activate_pull):
Track the activation mode.
(gst_base_transform_setcaps): In pull mode, when activating the
src pad, after activating the sink pad, activate the sink pad's
peer, as discussed in part-negotiation.txt.
* libs/gst/base/gstbasesrc.h:
* libs/gst/base/gstbasesrc.c (gst_base_src_fixate): Add fixate
vmethod, as in basesink.
* libs/gst/base/gstbasesink.h: Reformat docs, add fixate vmethod.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_setcaps): In pull
mode, first proxy the setcaps to the peer pad.
(gst_base_sink_pad_fixate): Add a fixate function that calls the
new fixate vmethod.
(gst_base_sink_default_activate_pull): Rename from
gst_base_sink_activate_pull.
(gst_base_sink_negotiate_pull): New function, performs negotiation
in pull mode before calling ::activate_pull().
(gst_base_sink_pad_activate_pull): Actually call the activate_pull
vmethod instead of the default implementation. I have no idea how
this worked before. Negotiate before calling activate_pull.
Original commit message from CVS:
* libs/gst/check/gstbufferstraw.h:
* libs/gst/check/gstcheck.h:
Add G_BEGIN_DECLS and G_END_DECLS. Move GST_CHECK_MAIN where it
belongs.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_remove_pad):
unref data at the end when we are done with the pad.
Original commit message from CVS:
2007-01-06 Andy Wingo <wingo@pobox.com>
* libs/gst/base/gstbasesink.h: New GstBaseSinkClass vmethod,
activate_pull(), providing for a way to specialize the process of
spawning a thread to pull on the sink pad. There is a default
implementation.
* libs/gst/base/gstbasesink.c (gst_base_sink_pad_activate_pull)
(gst_base_sink_pad_activate_push, gst_base_sink_pad_activate)
(gst_base_sink_init): Renamed pad activation functions (inserting
"_pad" in their names). Refactor to use the new activate_pull
vmethod, as appropriate.
(gst_base_sink_class_init, gst_base_sink_activate_pull): Set the
default activate_pull function to start a task pulling from the
sink pad, as before.
Original commit message from CVS:
* libs/gst/base/gstbasesrc.c: (gst_base_src_activate_push):
Change some GST_ERROR_OBJECT that aren't really errors to
GST_WARNING_OBJECT in order to reduce terminal spam.
Original commit message from CVS:
Patch by: Sjoerd Simons <sjoerd at luon dot net>
* libs/gst/base/gstcollectpads.c: (ref_data), (unref_data),
(gst_collect_pads_add_pad), (gst_collect_pads_remove_pad),
(gst_collect_pads_stop), (gst_collect_pads_event),
(gst_collect_pads_chain):
* libs/gst/base/gstcollectpads.h:
Add refcounting to the collectpads data so we can track when it's safe
to free the data. Fixes#383382.
Original commit message from CVS:
* libs/gst/base/gstcollectpads.c: (gst_collect_pads_add_pad),
(gst_collect_pads_remove_pad):
Automatically activate/deactivate pads when they are added to a
started/stoped collectpads.
Original commit message from CVS:
Patch by: Sebastian Droege <slomo at ubuntu dot com>
* libs/gst/check/gstcheck.h:
Fix compilation and running against 0.9.4. Fixes#377332.
Original commit message from CVS:
Patch by: Jonathan Matthew <jonathan at kaolin dot wh9 dot net>
* libs/gst/base/gstbasesrc.c: (gst_base_src_update_length):
Store new length in segment duration so we don't keep on calling the
potentially expensize get_size() call. Fixes#370865.
