Commit graph

9374 commits

Author SHA1 Message Date
Vivia Nikolaidou
379059b1c7 qtmux: Make sure timecode uses the same timescale as video
Don't blindly derive it from the frame rate, but try to get the per-pad
configured timescale first (if it exists)

https://bugzilla.gnome.org/show_bug.cgi?id=792680
2018-01-23 16:40:36 +02:00
Sebastian Dröge
c71cd08d0e qtmux: Allow configuring trak timescale per pad/trak
It generally makes not much sense to configure it for all pads/traks at
once as this value is usually different for each of them. As such, add a
new property on the pads in addition to the existing property on the
whole muxer.

https://bugzilla.gnome.org/show_bug.cgi?id=792649
2018-01-23 16:40:23 +02:00
Tim-Philipp Müller
f459438278 Update for renamed aggregator pad API
https://bugzilla.gnome.org/show_bug.cgi?id=791204
2018-01-23 09:46:32 +00:00
Sebastian Dröge
af273b4de9 rtspsrc: Fix up sendonly/recvonly attribute handling
We can't handle recvonly streams, sendonly streams are perfectly fine.

The direction is the one from the point of view of the SDP offerer
(i.e. the RTSP server), and a recvonly stream would be one where the
server expects us to send media.

RFC 3264, section 5.1:
   If the offerer wishes to only send media on a stream to its peer, it
   MUST mark the stream as sendonly with the "a=sendonly" attribute.

This is mixed up in the ONVIF streaming specification examples, but
actual implementations and conformance tools seem to not care at all
about the attributes.

https://bugzilla.gnome.org/show_bug.cgi?id=792376
2018-01-22 12:24:18 +02:00
Jan Alexander Steffens (heftig)
e273e5f7a6 aacparse: When parsing raw input, accept frames of any size
Raw AAC streams might have very small frames, e.g. 6 byte frames
when encoding silence. These frames are then smaller than aacparse's
default min_frame_size of 10 bytes (ADTS_MAX_SIZE).

When passthrough is disabled or aacparse has to output ADTS, GstBaseParse
will concatenate these short frames to the following frame before
handling them to aacparse, which processes each input buffer as a single
frame, producing bad output.

To avoid this problem, set the min_frame_size to 1 when receiving a raw
stream.

https://bugzilla.gnome.org/show_bug.cgi?id=792644
2018-01-18 19:09:19 +00:00
Mathieu Duponchelle
03dc22951b rtpbin: fix leak of elements requested by signals
When the signal returns a floating reference, as its return type
is transfer full, we need to sink it ourselves before passing
it to gst_bin_add (which is transfer floating).

This allows us to unref it in bin_remove_element later on, and
thus to also release the reference we now own if the signal
returns a non-floating reference as well.

As we now still hold a reference to the element when removing it,
we also need to lock its state and setting it to NULL before
unreffing it

Also update the request_aux_sender test.

https://bugzilla.gnome.org/show_bug.cgi?id=792543
2018-01-18 15:26:43 +01:00
Tim-Philipp Müller
dfb27b44bc multifilesink: document unit of "max-file-duration" property 2018-01-16 13:19:29 +00:00
Florent Thiéry
7c5e39f7a7 udpsrc: fix typo in documentation
https://bugzilla.gnome.org/show_bug.cgi?id=792458
2018-01-12 18:21:06 +00:00
Tim Allen
db07fc7e85 rtp: add L8 audio support 2017-12-24 13:19:56 +01:00
Mark Nauwelaerts
f3c3f8fb38 udpsrc: fix typo in multicast join error message 2017-12-23 12:48:20 +01:00
Mark Nauwelaerts
aad0faaf59 rtspsrc: also proxy multicast-iface property to RTCP udpsrc 2017-12-23 12:48:20 +01:00
Sebastian Rasmussen
5091b5f39f multiudpsink: don't try to set IPV6_TCLASS on IPV4 sockets
Avoids ERROR log message.

https://bugzilla.gnome.org/show_bug.cgi?id=757449
2017-12-23 12:45:17 +01:00
Vincent Penquerc'h
8b814f6351 flv: flvmux ported to the GstAggregator
This makes it possible to create a flv file from a live source and not stop
when there are packet drops.

https://bugzilla.gnome.org/show_bug.cgi?id=782920
2017-12-20 15:34:11 -05:00
Olivier Crête
6ea569841d multiudpsink: Call gst_base_sink_wait_preroll on unlock
This means that packets will not be lost on fast pause/playing cycles.

Also refactor the code a little to simplify it.

https://bugzilla.gnome.org/show_bug.cgi?id=774945
2017-12-19 16:47:52 -05:00
Olivier Crête
0a15d1782b multiudpsink: Remove unused variable 2017-12-19 15:50:14 -05:00
Edward Hervey
9a7dd45e57 rtspsrc: Fix two leaks
* gst_event_new_stream_start() does not take ownership of the stream_id

* the pipeline_request_id string that is created was not being freed
2017-12-19 11:57:52 +01:00
Nicolas Dufresne
3a17f52ca3 videocrop: Add GstVideoCropMeta support
If downstream supports this meta, it will add or update it from
the GstBuffer in-place rather then copying.

https://bugzilla.gnome.org/show_bug.cgi?id=791453
2017-12-17 15:39:53 -05:00
Sean DuBois
de8f080a5c Add AV1 to matroska plugin
https://bugzilla.gnome.org/show_bug.cgi?id=784160
2017-12-15 18:00:31 +01:00
fengalin
3464aac3c9 matroska: fix memory leaks due to toc related updates
https://bugzilla.gnome.org/show_bug.cgi?id=790686
2017-12-15 16:14:43 +02:00
fengalin
a6702a76d5 matroska: re-activate and update TOC support
TOC support in mastroskamux has been deactivated for a couple of years. This commit updates it to recent GstToc evolutions and introduces toc unit tests for both matroska-mux and matroska-demux.

There are two UIDs for Chapters in Matroska's specifications:
- The ChapterUID is a mandatory unsigned integer which internally refers to a given chapter. Except for title & language which use dedicated fields, this UID can also be used to add tags to the Chapter. The tags come in a separate section of the container.
- The ChapterStringUID is an optional UTF-8 string which also uniquely refers to a chapter but from an external perspective. It can act as a "WebVTT cue identifier" which "can be used to reference a specific cue, for example from script or CSS".

During muxing, the ChapterUID is generated and checked for unicity, while the ChapterStringUID receives the user defined UID. In order to be able to refer to chapters from the tags section, we maintain an internal Toc tree with the generated ChapterUID.

When demuxing, the ChapterStringUIDs (if available) are assigned to the GstTocEntries UIDs and an internal toc mimicking the toc is used to keep track of the ChapterUIDs and match the tags with the appropriate GstTocEntries.

https://bugzilla.gnome.org/show_bug.cgi?id=790686
2017-12-15 16:14:43 +02:00
Edward Hervey
6e21faffe7 qtdemux: Push a GAP event if there's a second *or more*
And not "more than a second"
2017-12-13 12:06:49 +01:00
Edward Hervey
2e45926a96 qtdemux: Don't push GAP event if first buffer is within 1s
If we saw empty segments, we previously unconditionally pushed a
GAP event downstream regardless of the duration of that empty
segment.

In order to avoid issues with initial negotiation of downstream elements
(which would negotiate to something before receiving any data due to
that initial GAP event), check if there's at least a second of difference
(like we do for other GAP-related checks in qtdemux) before
deciding to push a GAP event downstream.
2017-12-13 11:35:37 +01:00
Edward Hervey
5c341f0980 qtdemux: Don't set pared=True on underspecified audio/mpeg
This *really* needs to go through a parser to figure out what the
exact content type is.
2017-12-13 10:21:17 +01:00
Michael Catanzaro
d9235cdb49 equalizer: Fix -Wincompatible-pointer-types warning
This is caused by the new type propagation for g_object_ref.

https://bugzilla.gnome.org/show_bug.cgi?id=791494
2017-12-11 21:57:25 +00:00
John Nikolaides
91dfc20a04 splitmuxsink: added a "split now" action signal
Now, the video file can be split at an arbitrary time chosen by the user.

https://bugzilla.gnome.org/show_bug.cgi?id=787922
2017-12-08 21:16:15 +02:00
Alvaro Margulis
66f253ed9b multiudpsink: fix bind address leak
https://bugzilla.gnome.org/show_bug.cgi?id=790986
2017-12-08 00:31:32 +00:00
Tim-Philipp Müller
d4c04cb079 Revert "flacparse: fix header rewriting being ignored"
This caused broken metadata and also looks a bit dodgy.
Revert until we can figure out a solution that works for
all cases and doesn't break anything.

This reverts commit adeee44b07.

https://bugzilla.gnome.org/show_bug.cgi?id=727802
https://bugzilla.gnome.org/show_bug.cgi?id=785558
2017-12-07 11:17:32 +00:00
Matt Staples
ea1b10e4ca rtspsrc: Add a signal to allow outgoing messages to be modified or dropped
This feature allows applications to implement extensions to the RTSP
protocol, such as those defined in the ONVIF Streaming Specification.

https://bugzilla.gnome.org/show_bug.cgi?id=762884
2017-12-06 10:46:01 +02:00
Haakon Sporsheim
3c0d006c03 rtpsession: Handle zero length feedback packets
https://bugzilla.gnome.org/show_bug.cgi?id=791074
2017-12-02 13:58:34 +00:00
Florian Zwoch
b4ca81591c qtdemux: fix debug log for 'hvcC' codec_data
https://bugzilla.gnome.org/show_bug.cgi?id=784749
2017-12-02 13:46:29 +00:00
Sebastian Dröge
b02350bd62 flacparse: Request at least the full header size when parsing headers
Otherwise baseparse will incrementally send us bigger buffers until the
full header size is reached, which is not only pointless but also means
that baseparse will reallocate and copy into a bigger buffer for every
input buffers. In pull mode that's done in 64kb increments, in push mode
usually in much smaller increments, causing a lot of overhead for
example when parsing high-quality coverart.
2017-11-29 17:28:25 +02:00
Edward Hervey
10bc8fdfd2 rtspsrc: Do more checks for seekability
When receiving a seek event, check whether we can actually seek based
on the information the server provided.

Also add more documentation on what the seekable field means
2017-11-24 15:39:38 +01:00
Jan Schmidt
a260eb80fb qtmux: Always update reserved-duration-remaining
If a reserved-max-duration is set, we should always track
and update the reserved-duration-remaining estimate, even
if we're not sending periodic moov updates downstream for
full robust muxing.
2017-11-25 00:56:11 +11:00
Jan Schmidt
76e458a119 splitmuxsink: Use muxer reserved space properties if present.
If the use-robust-muxing property is set, check if the
assigned muxer has reserved-max-duration and
reserved-duration-remaining properties, and if so set
the configured maximum duration to the reserved-max-duration
property, and monitor the remaining space to start
a new file if the reserved header space is about to run out -
even though it never ought to.
2017-11-25 00:56:11 +11:00
Jan Schmidt
3a813a0dcc splitmux: Fix file switch-on-caps-change.
Switching to a new fragment because the input caps have
changed didn't properly end the previous file. Use the normal
EOS sequence to ensure that happens. Add a test that it works.
2017-11-24 16:56:03 +11:00
Tim-Philipp Müller
c8ff205089 rtph265depay: don't insert SPS/PPS inline for hvc1 output
Only for byte-stream or hev1. For hvc1 the SPS/PPS are in the
caps as codec_data field and in this case they shouldn't be in
the stream data as well. The output caps should be updated with
the new codec_data if needed, for hvc1.
2017-11-23 09:36:15 +01:00
Tim-Philipp Müller
8da79ca824 rtph265depay: store negotiated output format as enum
We keep the boolean byte_stream around since it's nicer for
readability and most of the code just cares about byte_stream
or not. This is useful for future-proofing the code for when
we add support for hev1 output as well.
2017-11-23 09:36:15 +01:00
Tim-Philipp Müller
46861027b9 rtph265depay: add support for hvc1 as output format 2017-11-23 09:36:15 +01:00
Tim-Philipp Müller
b84201bf81 rtph265pay: don't add trailing zeros to VPS/PPS/SPS
This would happen if input is byte-stream with four-byte
sync markers instead of three-byte ones. The code that
scans for sync markers will place the start of the NALU
on the third-last byte of the NALU sync marker, which
means that any additional zeros may be counted as belonging
to the previous NALU instead of being part of the next sync
marker. Fix that so we don't send VPS/SPS/PPS with trailing
zeros in this case.

See https://bugzilla.gnome.org/show_bug.cgi?id=732758
2017-11-23 09:36:15 +01:00
Tim-Philipp Müller
311b9895ba rtph265depay: assemble AUs into downstream-allocated memory
When merging NALs into AUs, use downstream-provided allocator
to allocate memory and copy NALs directly into that memory when
assembling them.
2017-11-23 09:36:15 +01:00
Tim-Philipp Müller
2d0ea4d381 rtph265depay: try to negotiate an allocator with downstream 2017-11-23 09:36:15 +01:00
Tim-Philipp Müller
528b7e01f1 rtph265depay: simplify buffer accumulation control flow
There is no difference between pushing out a buffer directly
with gst_rtp_base_depayload_push() and returning it from the
process function. The base class will just call _depayload_push()
on the returned buffer as well.

So instead of marshalling buffers through three layers and back,
just push them from one place in handle_nal() and always return
NULL from the process vfunc. This simplifies the code a little.

Also rename _push_fragmentation_unit() to _finish_fragmentation_unit()
for clarity. Push sounds like it means being pushed out, whereas
it might just be pushed into an adapter.

This change has the side-effect that multiple NALs in a single STAP
(such as SPS/PPS) may no longer be pushed out as a single buffer if
we output NALs in byte-stream format (i.e. not aggregate AUs), but
that shouldn't really make any difference to anyone.
2017-11-23 09:36:15 +01:00
Tim-Philipp Müller
289882497a rtph265depay: fix crash with empty sprops-parameters
https://bugzilla.gnome.org/show_bug.cgi?id=780040
2017-11-23 09:36:15 +01:00
Tim-Philipp Müller
0580efc6a6 rtph265depay: minor clean-up
Declutter caps update code a bit.
2017-11-23 09:36:15 +01:00
Philip Craig
ec11b228a4 rtph264pay: don't add trailing zeros to PPS/SPS
This would happen if input is byte-stream with four-byte
sync markers instead of three-byte ones. The code that
scans for sync markers will place the start of the NALU
on the third-last byte of the NALU sync marker, which
means that any additional zeros may be counted as belonging
to the previous NALU instead of being part of the next sync
marker. Fix that so we don't send SPS/PPS with trailing
zeros in this case.

https://bugzilla.gnome.org/show_bug.cgi?id=732758
2017-11-23 09:36:15 +01:00
Tim-Philipp Müller
f3e4df72a1 rtph264depay: assemble AUs into downstream-allocated memory
When merging NALs into AUs, use downstream-provided allocator
to allocate memory and copy NALs directly into that memory when
assembling them.
2017-11-23 09:35:59 +01:00
Tim-Philipp Müller
b6f13ce4e9 rtph264depay: try to negotiate an allocator with downstream 2017-11-23 09:35:59 +01:00
Tim-Philipp Müller
44f70445b6 rtph264depay: minor clean-up
Declutter caps update code a bit.
2017-11-23 09:27:22 +01:00
Edward Hervey
22ab222dbc qtdemux: Run gst-indent 2017-11-23 08:00:58 +01:00
Edward Hervey
4e90993423 rganalysis: Fix left shift of signed values
left shifting signed values is undefined.

Instead of doing "x << offs" which is undefined, do the equivalent
"x * (1 << offs)" which is well defined
2017-11-23 07:59:07 +01:00